Best Vacuum Dust Collector Hoses of 2025

"I was looking for a hose and adapters to connect my saw and sander to my shop vac for years. This set was PERFECT! The 20ft hose is just what I needed to keep the ShopVac out of the way while I work. It fits my DeWalt Orbital Sander and Worksite Table Saw perfectly, plus the hose is incredibly flexible and well made."

"This kit has transformed my shop vac into a dust collector! I have the Ridgid 11 gallon smart cart and it fits perfectly. Disconnecting the factory hose and connecting the Cen-Tec hose is a breeze. The quick connect fitting allows me to use it with all my tools, providing strong suction and easy handling."

"I've been using this hose for over a year now in my wood shop, and it’s been fantastic. The quick connect adapters stay attached to my tools, making switching easy. Although I wish I had more adapters for all my tools, I can buy extras. My only concern is avoiding stepping on the hose too hard, but overall, it’s a 5-star product for me!"

"I find this hose to be extremely durable. I use it with multiple tools in my shop. One tip I recommend is to connect the coil wire to the equipment on at least one end to dissipate static buildup in the hose."

"After switching from the short and costly 7' billy goat vacuum hose to a 20' version, I was impressed by its performance in cleaning leaves from bushes. While it is lighter gauge vinyl and may tear over time, I can just trim bad ends off and keep using it. The length is a bit unwieldy, but worth it for larger areas."

"I believe this hose is of good quality and integrates well with my system. It fits nicely and is tough enough for my needs, but I suggest keeping an eye on pricing as it varies across different sellers."

"I find this product to be fantastic. It offers numerous ways to connect to my tools and works seamlessly."

"I'm really pleased with the hose. It feels sturdy and has a nice appearance. The connectors are definitely not cheap."

"I've been searching for a method to connect my shop vac to smaller tools, and this does the trick perfectly!"

"I needed a hose with adapters to connect my sander and saw to a wet/dry vacuum. I chose this one because of the multiple adapters it offered. Although the adapters didn't fit my sander initially, I found that the tough rubber could be molded. Using a heat gun, I softened the rubber adapter and shaped it to fit my sander's connector. Now, it has an airtight fit that stays in place without clamps. I'm really pleased with this product and believe it will last."

"I bought this kit to connect my shop vac to my sander. Sadly, the adapters didn't fit either device. It seems this set might only work for vacuum tools. Returning this unfortunately."

"I purchased this hose kit for my Bissel Pet Hair Eraser vacuum that I now use in the garage. The original hose was broken. I was thrilled to find that this hose is much longer and sturdier than the original. The included couplers fit tightly and securely onto my vacuum. I even got it for less than $18, which is a steal!"

"I needed a hose for my planer to direct wood chips into a can. It worked just as I hoped! The clamps are easy to use with a handy thumb screw, and the hose feels very sturdy. The only downside is that it’s a bit hard to store since it doesn’t shrink back down like it did in the packaging, but I suppose that’s expected."

"Having a Rigid shop vac for years, I experienced a kink near the vacuum side. Though it still worked, I found the original hose quite disappointing. After searching for replacements and finding them either expensive or hard to find, I decided to try this hose. I cut the old one and used clamps to attach it, which worked out great! It’s hard to kink, and while it contracts when turned on, it doesn’t cause any issues. Overall, it went better than expected!"

"I found this hose to be similar to others I’ve purchased from Woodcraft, but at half the price. However, the clamps are not ideal; they don’t fit well over the wire ribbing even when fully open. If you have your own clamps or can pick some up from a big box store, I recommend that route. Still, the hose is a great deal!"

"I use this to attach to my DeWalt planer and direct the sawdust out of my shop. After about a year of use, it has held up well with a galvanized hook and shows no signs of puncture. This is a repeat buy for me, as it withstands rough use."

"I just needed a bit of flexible hose and some clamps. I appreciate that this hose is made in the USA. It's nice and flexible, easy to cut and install, and it's working well for my needs."

"I really like the quality of this product; it's strong and durable. I would definitely recommend it to others."

"I recently installed this hose with my new 2 HP dust collector, and I am completely satisfied. The diameter fits snugly, and the material feels strong. It’s a generous length that reaches everywhere I need it."

"I ordered this hose to replace an older one on my Central Machinery 13-gallon dust collector. It took some coaxing to fit it, but once clamped, it performs well. The PVC is flexible, and there’s no collapsing, even with 660 CFM. I’m really happy with it overall."

"This hose seems to be made of decent material. I’m optimistic about its longevity and would recommend it."

"I used this hose for various tools in my small shop, cutting it into smaller sections. Nothing is worse than fighting with inflexible hose in tight spaces. This hose is durable, flexible, and fits all standard 2 1/2 inch ports. It's definitely an upgrade for me."

"This hose is a fantastic addition to my workshop's dust collection system. The see-through design allows me to see the sawdust flow and how much is left inside. It's very flexible and easy to fit on different tools, making it perfect for reaching various sections of my workshop."

"I connected this to my 2 1/2" Craftsman gutter cleaning tool to vacuum my gutters. Since I have a Craftsman vacuum, all parts fit together perfectly. This product is well worth the money as it saves me from handling a bucket."

"I bought this hose for my husband to connect to a drum he has in order to make a vacuum for our shop. It works great! Very sturdy and perfect length for what we needed. Price was great for the item received. May end up buying another one for our other shop."

"The hose works as it should. I’m plenty happy with it. The clamps are flimsy and strip with the slightest tightening. Still, a good deal overall for the hose and getting quality band clamps from the local big box store. Five stars for the hose!"

"The material of this hose is superior, making it easy to bend without kinks and the size matches my adapters just fine. I’m very satisfied with my purchase!"

"I got this for my ferrets, and they absolutely love it! Months of play with no holes, and it’s thick and durable. It's a bit heavy compared to a dryer hose, but it fits perfectly for their fun."

"As a former HVAC business owner, I’ve used various hoses for different applications. This clear hose is perfect for my woodshop dust collector; it has the right quality and weight for my needs. It's not as expensive as heavy-duty hoses but performs well in home use."

"This was my second purchase of this hose. I needed more for my CNC Router, and it's flexible and tough. Just a heads-up: my dust collector causes the hose to shorten a little when it's turned on, so I recommend checking that before hooking it to fixed tools."