2.89 pounds
15.4 x 8.3 x 4.5 inches
View On Amazon
View Reviews

Buyer's Reviews 127

In 1983, my wife and I moved to a new place in San Diego. I made bookcases from floor to ceiling. They are shelves bolted to the 2x2s, and I drilled nearly 600 holes in the 2x2s and the rack bracket. To do this, I bought a drill guide from Portalign Tool Company, right here in San Diego, even though I bought it at a hardware store that had been closed for a long time. So is Portalign tools. I attached two photos of their previous drill guides. One of the major disadvantages of this bit guide is the chuck arrangement. To use it, you must remove the chuck from the bit (they provide instructions on how to do so) and reinstall it under the sliding bar on the bit guide. You then connect the drill bit to the sliding bar and start business. Later, when you want to do something else with that bit, you have to disassemble your bit rail and reassemble your bit. It was a tedious process, and I endured it in the first few years because of its economy. But a few years later, I got another exercise, and then I set one on the practice guide, and since 1992, I've been actively renovating our homes room after room. The current project is a new kitchen cabinet. I bought a drilling machine a long time ago, but the old drilling machine guide is often required to use, because sometimes the drilling machine just can't finish the work. If you decide to drill into the center of a very large artifact, you will need a drill GUI.

15 pounds
10 x 6.5 x 10 inches
View On Amazon
View Reviews

Buyer's Reviews 441

For $42, it does the work, which is said to be a challenge to use at the beginning, if you like my new milling. But it does achieve an 80% reduction in AR15. Warning words are a little too large for AR15 to drop on a small drilling machine. It's like Wynn, which I bought for $74. Good luck cleaning and lubricating it before using it. Take your time. I feel like a caveman who discovered fire for the first time.

Milescraft Inc.
1 pounds
7.5 x 5.3 x 13.3 inches
View On Amazon
View Reviews

Buyer's Reviews 200

I just got this and attached my Black&Decker RTX rotation tool to it. It works perfectly. In fact, I assembled it with my Bamboo W tool and drilled out a plastic part to make something else. The bracket is prefabricated accurately. The collar in the toolbox is difficult to start on the collar thread of the Bourw tool. But after putting on the collar, the tools become strong. The description is a series of badly copied photos. But you can get the idea. When the bolt (2) is tightened, the bracket is a strong component. It's not loose.

11.55 pounds
10 x 12 x 8 inches
Various, Steel
View On Amazon
View Reviews

Buyer's Reviews 77

The drilling machine surprised me that it had no problems with others. It is very well packaged and shaped for foam. The instructions are written in simple English. Yes, it's covered with oil. This should be the way to prevent rust. The oil is easily cleaned up, and I've received other equipment with thick grease on it. Yes, as soon as the speed control is turned on, the drill will stall. Until I turned the press upside down and oiled the bearings with three-in-one lubricating oil. There's no procrastination! The base is completely flat, with some paint except for a very small area. It's easy to polish. Drilling a hole in very hard plastic can lead to a straight, clean hole. I have resistance to lower the bit until I turn the big spring until it cleans the shaft. When I put down the drill, I could feel the gear on the gear. I wonder if I can put some hard grease on the gear. If it had a clamp that fits the base better than the pliers I bought, that would be great.

Shop Fox
50.9 pounds
10.5 x 18 x 13.7 inches
View On Amazon
View Reviews

Buyer's Reviews 42

After watching a marketing video describing the features and features of the product, my husband and I immediately ordered the product to take advantage of dual-use tool features (drilling machines and contact sanding machines). Unfortunately, we didn't review any customer feedback before ordering, and then we found some negative comments. Motor shell damage, inadequate packaging, etc.). We received the project and assembled it yesterday. Here are some of the pros and cons of the assembly process, but overall, we have a very positive experience and I would recommend this product as a reliable supplement to any store. Note: I will start with shortcomings because they are limited. When we opened the box, most of the packing was greatly damaged; however, all the parts were in good condition without any damage. Packaging damage is not a big problem, because we decided that polystyrene foam packaging was designed to withstand the impact of transportation, and our goods were transported all the way to Alaska, so we know that it needs to go through the hands of a lot of people (and some transportation centers are not as careful in handling parcels as others). For the second scam, I mistakenly ordered the grinding wheel mandrel (which uses this tool as the main component of the Sander), but it must be included in the tool purchase. I don't know if this part is included in the W1667 model, because I didn't see it in the project description, nor did I mention it in a smaller version of the marketing video of the tool (or I might.

75 pounds
15 x 9.4 x 33 inches
View On Amazon
View Reviews

Buyer's Reviews 10

I like everything in the drilling machine, very strong structure. I ran very well.

3.66 pounds
16.4 x 7.1 x 3 inches
View On Amazon
View Reviews

Buyer's Reviews 20

It's not very stable, so I added 2 chrome cabinet poles to support L brackets 12 inches high on each side to keep it more accurately drilling the same place instead of moving one side to the other. I'm working very well now!

8.05 pounds
12.6 x 9.4 x 5.1 inches
Corded Electric
View On Amazon
View Reviews

Buyer's Reviews 50

Tired of going cheap-I think I'm going to pay a little bit more, so this tool will last a little longer-fit and finish this little press is perfect, the spindle has zero play to run quietly-bought this little drilling machine compound watch, it was flawless-before buying this machine, I am used to 0.5mm cemented carbide bit is a use item-with this I use a single micro bit over and over again. I was impressed again by this little bit and the company that made it, and the price you paid was amazing-yes, I suggest you. Note: I bought mine in 2015 made in Germany-if you buy a drill labeled "CE" from Proxxon, it is made in China, this comment does not apply to-DM.

#95,699 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #20 in Benchtop Drill Presses
0603016955182 , 0789164328167 , 8020684777236 , 0009219140002
Corded Electric
View On Amazon
View Reviews

Buyer's Reviews 28

This does require assembly, and you may need more than one person to help assemble it. This is a good drilling machine. The laser guide is a joke, and I really never bother to open it.

Sona Enterprises
2.2 pounds
20.5 x 13.1 x 17.1 inches
View On Amazon
View Reviews

Buyer's Reviews 137

This drilling machine is used instead of the inaccurate Dreymeyer press. It's easy to set up. Speed adjustment doesn't work as expected, but I can solve the problem. Overall, I will evaluate the accuracy of this press as a drilled circuit board.

Product Compare

# TOP 1-Kanzawa Drill Guid... 2-Hardware Factory S... 3-Milescraft 1097 St... 4-Small Benchtop Dri... 5-Shop Fox W1667 Ben... 6-General Internatio... 7-NUZAMAS Workstatio... 8-Proxxon 38128 Benc... 9-Craftsman 12 Drill... 10-SE 97511MDP 3 Spee...
Product Kanzawa Drill Guide Support K 801 Thumbnail Hardware Factory Store 4 Inch Compound Thumbnail Milescraft 1097 Stand Drill Rotary Thumbnail Small Benchtop Drill Press DRL 300 00 Thumbnail Shop Fox W1667 Bench Top Oscillating Thumbnail General International 75 010 M1 Bench Top Thumbnail NUZAMAS Workstation Flex Shaft Drilling Station Thumbnail Proxxon 38128 Bench Drill Machine Thumbnail Craftsman 12 Drill Press Thumbnail SE 97511MDP 3 Speed Drill Press Thumbnail
Customer Reviews
Item Weight 2.89 pounds 15 pounds 1 pounds 11.55 pounds 50.9 pounds 75 pounds 3.66 pounds 8.05 pounds - 2.2 pounds
Material Metal Metal Metal Various, Steel Other - Steel - Aluminum Metal
Date First Available April 11, 2016 June 20, 2014 January 28, 2004 February 28, 2010 September 25, 2006 January 27, 2017 November 19, 2017 April 11, 2008 - March 5, 2009
Product Dimensions - 10 x 6.5 x 10 inches 7.5 x 5.3 x 13.3 inches 10 x 12 x 8 inches 10.5 x 18 x 13.7 inches 15 x 9.4 x 33 inches - 12.6 x 9.4 x 5.1 inches - 20.5 x 13.1 x 17.1 inches
Power Source - Manual Corded Electric corded-electric Corded Electric Corded Electric hand-powered Corded Electric - Corded Electric
Support Prime
Price $107.79 $47.99 $34.49 $100.83 $208.33 $279.99 $33.18 $220.91 $230.74 $94.25
View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon