Loading...
34 pounds
14 x 10.8 x 14 inches
1
Metric
9.5
View On Amazon
View Reviews

Buyer's Reviews 48

I got the news because I used it at work, and I found myself using it for sideline projects all the time. In order to clarify expectations, this is a one-ton printing press. It's manual. This means that the operator's arm works. To put 2000 pounds on a ram, you only need to put about 100-200 pounds on the lever. So, if you climb up this thing and really lean in, you may want to upgrade to a larger model, because you may only explode this with your rough physical strength. In addition, this does not seem to be overemphasized. The press is not designed to produce 2000 pounds of power, but to tolerate so much power. If you need something else to power, hydraulic cylinders are a better choice. I mainly use this to drive the shaft of the motor for reconstruction. I may only have 100-200 pounds at the top, but the big media gives me more control over what I'm doing. When I opened the box, everything looked fine, so after reading some of the recent comments, I was a little nervous and didn't know what I would find when I opened the lid. (the drill end of the punch is shipped upward, so you need to flip it to use the insert.) To my surprise, I found only some paint fragments and very wise grease in it. The rest of the reporters had only one layer of light oil. Although the box showed some signs of a rough voyage, everything was packed inside and no damage was seen. Yes, it looks like a typical one.

12 x 8 x 8 inches
#123,061 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #2 in Arbor Presses
0769053067025
Arbor Press
9.5
View On Amazon
View Reviews

Buyer's Reviews 90

I converted this tree press into a small hole / rivet press. You can use it out of the box. Remove the front plate and eventually re-tap the hole where the bolt hole is installed and replace the bolt because one of the bolts is a bit uneven on the thread. That's why the photos have different bolts. If you don't take it apart, you'll never know. Drilling and tapping punches and plates. It works.

34.6 pounds
13.3 x 12 x 5.4 inches
Metal
Manual
9.0
View On Amazon
View Reviews

Buyer's Reviews 20

Large and small printing presses, but you can buy the same printing press cheaper on port freight.

4.2 pounds
Item can be shipped within U.S.
#621,374 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #25 in Arbor Presses
8.9
View On Amazon
View Reviews

Buyer's Reviews 39

This is a rarely used, but necessary and convenient device. It is used for setting fabric rivets and fastening. It is difficult for women with small hands to set up such items with ordinary pliers. This printing press and several custom mandrel solve this problem. It is the right tool in the use of tailors and quilters rather than ironworkers or machinists. The device itself is well made, very durable, is a precision tool (now connected to a heavy desktop base to maintain stability), and is suitable for narrow and specific range of tasks. It is recommended that it be combined with a suitable and optional mandrel for a variety of possible uses (i.e. fabric / leather riveting, drilling, plastic handicrafts, etc.). Few customers have the ability to make the necessary mandrel without resorting to expensive custom processing. Thank you!

61 x 35.6 x 35.6 inches ; 95 pounds
#612,975 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #23 in Arbor Presses
0769053067155
52307.28893550079 milliliters
8.6
View On Amazon
View Reviews

Buyer's Reviews 19

Very good heavy press, like the method of adjusting for repeated press projects.

61 pounds
18.6 x 16.6 x 9.7 inches
See Photo
corded-electric
8.0
View On Amazon
View Reviews

Buyer's Reviews 15

I needed a quieter way to do some leather work and bought a Jet 1 ton press. It suits what I want, but the work area is smaller than I want. I wanted more depth between the punch back and I also wanted more height between the punch and the table, so I started looking at the 3-ton tree press. The freight is a little more than I'd like to pay for the three ton version. For me, another drawback of the three-ton version is its weight. Because I move a little (clip it to the bench when I need it), I prefer the lighter weight of the 2-ton press to the larger press. Most of my tasks on this press include punching or stamping leather on leather and setting rivets / or small holes. Instead of actually using the included anvil to do my job, I chose to use a flat steel 1 inch thick as the base, or sometimes just a flat plate, when I didn't want to risk cutting the cutting tool through the leather into the steel. One of the negative effects of me is that my fixing screws on the plunger are a little crossed. A replacement retaining screw must be found.

38 pounds
13.5 x 11 x 5.5 inches
Manual
1
7.9
View On Amazon
View Reviews

Buyer's Reviews 14

Overall, this is a good price news. The pinion shaft has a very loose fit with the shell. I don't understand why they made it so loose. Took some. 005 brass gasket stock, now very good very tight. It's a great job.

2.2 pounds
1"X7"X7"
1
No
7.4
View On Amazon
View Reviews

Buyer's Reviews 9

It does the work, but if it's cut straight or at 90 degrees. I would like it if it were painted instead of pig iron.

23 pounds
5 x 10.8 x 27 inches
1
See Photo
7.2
View On Amazon
View Reviews

Buyer's Reviews 15

I use this Arbor Publishing House every day, and it shows no sign of abuse. Exert enough force in the direction you need, all you have to do is put it on a strong table, and you're ready.

68 pounds
9.75" X 9.75" X 1.50"
Steel
Manual
7.1
View On Amazon
View Reviews

Buyer's Reviews 10

I should have bought these a long time ago.

Product Compare

# TOP 1-Palmgren AP10 Ton... 2-HHIP Heavy Arbor M... 3-Central Machinery... 4-Bald Eagle BE1001... 5-Ratchet Lever Pres... 6-JET AP 2 Ton Arbor... 7-Arbor Press 1 Ton 8-PRESS PLATES ARBOR... 9-JET AP 1 Ton Arbor... 10-SWAG Road Arbor Pr...
Product Palmgren AP10 Ton Arbor Press Thumbnail HHIP Heavy Arbor Multiple Options Thumbnail Central Machinery Ton Arbor Press Thumbnail Bald Eagle BE1001 Arbor Press Thumbnail Ratchet Lever Presses Various Capacity Thumbnail JET AP 2 Ton Arbor Press Thumbnail Arbor Press 1 Ton Thumbnail PRESS PLATES ARBOR PARALELLS SET Thumbnail JET AP 1 Ton Arbor Press Thumbnail SWAG Road Arbor Press Plates Thumbnail
Customer Reviews
(48)
(90)
(20)
(39)
(19)
(15)
(14)
(9)
(15)
(10)
Item Weight 34 pounds - 34.6 pounds 4.2 pounds 95.0 pounds 61 pounds 38 pounds 2.2 pounds 23 pounds 68 pounds
Date First Available November 2, 2016 - January 18, 2012 - - January 1, 2006 February 13, 2005 September 5, 2017 December 27, 2006 June 27, 2014
Support Prime
Price $104.95 $59.47 $59.99 $90.95 $253.22 $219.00 $75.99 $74.99 $109.00 $246.95
View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon
Top