Melin Tool

4.8

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Melin Tool has 306 products for sale. Melin Tool products range in price from $11.53 to $273.38, and the average price of all the products is about $37.15.

We found that most of the Melin Tool products are manufactured by Melin Tool Company. The manufacturer provides Melin Tool with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Melin Tool products from the seller Suncoast Precision Tools Inc.. The brand holds an average rating of 4.81, testifying to its excellent reputation.

Melin Tool Best Sellers

Last Updated: Jan 11, 2025

Melin Tool-16100 RCMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 2.5000" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter

Corner Rounding End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Can provide uniform finish on corners

Radius is form relieved

Melin Tool CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.1250" Cutting Diameter, 0.125" Shank Diameter

Ball Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness

Round shanks allow use with a wide variety of toolholding systems

Use for radius and contouring part surfaces

Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous

Melin Tool EMG-L Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 3" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter

Square Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

3 flute design will usually allow feed rates 50 percent faster than 2 flute tools

Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750" Overall Length, 0.5313" Cutting Diameter, 0.5" Shank Diameter

Square Nose End Mills

Buy on Amazon Find on eBay

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment

Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc

30 Degree helix angle

Melin Tool BRMG Carbide Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 2.5000" Overall Length, 0.095" Cutting Diameter, 0.3125" Shank Diameter

Corner Rounding End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Can provide uniform finish on corners

Radius is form relieved

Melin Tool 16099 RCMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 2" Overall Length, 0.125" Cutting Diameter, 0.1875" Shank Diameter

Corner Rounding End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Can provide uniform finish on corners

Radius is form relieved

Melin Tool - 11637 CCMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 4 Flutes, 2.5" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

Drill Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Can be used for drilling, slotting, chamfering, and profile milling

Available in 90 degree points

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter

Drill Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness

Round shanks allow use with a wide variety of toolholding systems

Can be used for drilling, slotting, chamfering, and profile milling

Available in 90 degree points

Melin Tool CCMG-M-M-B Carbide Ball Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 51mm Overall Length, 3.5mm Cutting Diameter, 4mm Shank Diameter

Ball Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

For applications in steel and non-ferrous materials

30 Degree helix angle

Melin Tool EMG-M-M Carbide Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 38mm Overall Length, 3mm Cutting Diameter, 3mm Shank Diameter

Square Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

General purpose square end

30 Degree helix angle

Melin Tool 17860 CCMG-L Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.0625" Cutting Diameter, 0.125" Shank Diameter

Square Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials

30 Degree helix angle

Melin Tool CCMGS-M-M Carbide Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 51mm Overall Length, 7mm Cutting Diameter, 8mm Shank Diameter

Square Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

General purpose square end

30 Degrees helix angle

Melin Tool AMG-M-M-B Carbide Micro Ball Nose End Mill, Metric, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 38mm Overall Length, 1.5mm Cutting Diameter, 3mm Shank Diameter

Ball Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness

Round shanks allow use with a wide variety of toolholding systems

For applications in steel and non-ferrous materials

30 Degree helix angle

Melin Tool CCMGN Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2" Overall Length, 0.1250" Cutting Diameter, 0.125" Shank Diameter

Square Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Neck diameter reduced for clearance

Used to mill deep pockets or slots where long flute lengths are not needed. The solid neck area provides reach with maximum rigidity

Melin Tool EMG Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 2" Overall Length, 0.1563" Cutting Diameter, 0.1875" Shank Diameter

Square Nose End Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

3 flute design will usually allow feed rates 50 percent faster than 2 flute tools

Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials

Melin Tool A-B Cobalt Steel Ball Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 4.1250" Overall Length, 1.7500" Cutting Diameter, 1.25" Shank Diameter

Ball Nose End Mills

Buy on Amazon Find on eBay

Suitable for general-purpose machining on stainless steel, nickel-based alloys, tough alloys, and abrasive materials

Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel

Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials

Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material

Ball nose end mills (also called ball end) create contoured surfaces

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 2.4375" Overall Length, 0.25" Cutting Diameter, 0.375" Shank Diameter

Drill Mills

Buy on Amazon Find on eBay

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Can be used for drilling, slotting, chamfering, and profile milling

Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc

Melin Tool AMG-M-M-DP Carbide Drill Mill, Metric, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 38mm Overall Length, 2mm Cutting Diameter, 3mm Shank Diameter

Drill Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Can be used for drilling, slotting, chamfering, and profile milling

Drill point end

Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter

Drill Mills

Buy on Amazon Find on eBay

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Can be used for drilling, slotting, chamfering, and profile milling

Available in 60 degree points

Melin Tool AMG-EB Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 4" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter

Ball Nose End Mills

Buy on Amazon Find on eBay

Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials

Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills

Aluminum titanium nitride (AlTiN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN, TiAlN, and TiCN coatings

Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures

Ball nose end mills (also called ball end) create contoured surfaces

Melin Tool FAQs

Is Melin Tool Legit?

Yes, Melin Tool is a legitmate brand on Amazon. After conducting a comprehensive analysis of 108 customer reviews for Melin Tool products on Amazon, we have determined its average rating. With a strong performance and good quality, Melin Tool has received an average rating of 4.81 from numerous buyers, indicating that Melin Tool are trustworthy and live up to their claims. Therefore, it is safe to make purchases from Melin Tool on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more Melin Tool products?

If you're interested in Melin Tool and want to find more Melin Tool products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type Melin Tool in the search box and hit Enter to see the search results.
Find and click the correct Melin Tool to go to the new page.
Select the products you want in the Melin Tool buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Melin Tool products.

How does findthisbest choose the top Melin Tool products?

We analyze millions of Melin Tool products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase Melin Tool products via FindThisBest?

Go to the Melin Tool page.
Select the product you want in the Melin Tool buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Melin Tool-16100 RCMG Carbide Corner Rounding End..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the Melin Tool products?

Most of the Melin Tool products are produced by Melin Tool Company. The manufacturer provides Melin Tool with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the Melin Tool products, helping you make more informed buying decisions. We recommend best choices of the products from the Melin Tool brand, helping you make better shopping choices with less time and energy.

Similar Brands

Uxcell

Genmitsu

HHIP

Accusize Industrial Tools