FOMASP

4.9

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, FOMASP has 65 products for sale. FOMASP products range in price from $14.99 to $35.99, and the average price of all the products is about $30.3.

We found that most of the FOMASP products are manufactured by FM and LH. The manufacturers provide FOMASP with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase FOMASP products from the seller FomaSP. The brand holds an average rating of 4.87, testifying to its excellent reputation.

FOMASP Best Sellers

Last Updated: Jan 11, 2025

FomaSP Carbide Inserts for Steel CCMT21.51 / CCMT060204 for Turning Cutting Tools, The chip Breaker"PM" fit for Semi-Finishing Metal Cutting, 10 PCS

Turning Inserts

Buy on Amazon Find on eBay

Chip breaker for Semi-finishing turning, facing, profiling. General used, easy chip-flow, special bulge close to the nose radius and big rake angle generate the cutting ability and low cutting force of chipbreaker.

Size: ΦIC: 6.35mm, Thickness(S): 2.38mm, Dimension(Φd)：2.8mm, Radius(R): 0.4mm, Nose Angle: 7°

Bi-colors yellow and black, CVD coated grade, with thick wear-resistance coating on the general gradient sintered substrate. Good use for steel continuous cutting as well as interrupted cutting.

Long processing life, competitive price, high cost performance, with better working range, apply to steel wheel and hub, gear and so on.

Has more than 15 years of experience in producing carbide inserts

Read more Read less

FomaSP GTN-3 (SP300) CNC Grooving Carbide Inserts Steel Fit for SPB326 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs

Internal Grooving Inserts

Buy on Amazon Find on eBay

Yellow colors CVD coating, use for a variety of steel and cast iron continuous and interrupted cutting finishing to roughing.

Size, Width(B): 3.1mm, Radius(R): 0.2mm, Longth(L): 11.3mm, fit for Korloy grooving holder.

General chipbreaker for semi-finishing working, with better chip breaker, good material and more efficiency.

Long processing life, high cost performance, with better working range, A high the thermal shock resistance, suitable for light interrupted cuts.

Has more than 15 years of experience in producing carbide inserts.

FomaSP TNMG331 / TNMG160404-PM of CNC Carbide Inserts for Steel Turning Cutting Tools, The Chip Breaker PM fit for Semi-Finishing Metal Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

Size: ΦIC: 9.525mm, Thickness(S): 4.76mm, Dimension(Φd)：3.81mm, Radius(R): 0.4mm, Nose Angle: 0°

Bi-colors yellow and black, CVD coated grade, with thick wear-resistance coating on the general gradient sintered substrate. Good use for steel continuous cutting as well as interrupted cutting.

Long processing life, high cost performance, with better working range, apply to steel wheel and hub, gear and so on.

Has more than 15 years of experience in producing carbide inserts.

FomaSP WNMG432 / WNMG080408-PM of CNC Carbide Inserts for Steel Turning Cutting Tools, The Chip Breaker"PM" fit for Semi-Finishing Metal Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

FomaSP TNMG332 / TNMG160408-PM of CNC Carbide Inserts for Steel Turning Cutting Tools, The Chip Breaker"PM" fit for Semi-Finishing Metal Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

FomaSP Carbide Inserts for Aluminum CNMG432 / CNMG120408 for Turning Cutting Tools 10 PCS

Turning Inserts

Buy on Amazon Find on eBay

Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality

Size(I.W): 12.7mm, Thickness(S): 4.76mm, Dimension(Φd): 5.16mm, Radius(R): 0.8mm

Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing

Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15.

Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting.

FomaSP CNMG432 / CNMG120408-PM of CNC Carbide Inserts for Steel Turning Cutting Tools, The Chip Breaker"PM" fit for Semi-Finishing Metal Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

Size: ΦIC: 12.7mm, Thickness(S): 4.76mm, Dimension(Φd)：5.16mm, Radius(R): 0.8mm

Bi-colors yellow and black, CVD coated grade, with thick wear-resistance coating on the general gradient sintered substrate. Good use for steel continuous cutting as well as interrupted cutting.

Long processing life, high cost performance, with a good working range, suitable for steel wheels, gears and so on.

We have more than 15 years of experience in carbide blade production, with rich technical accumulation and professional knowledge, we continue to provide high quality, high performance carbide blade products to meet the various needs of customers.

Read more Read less

FomaSP Carbide Inserts for Aluminum CCGT21.51 / CCGT060204-LH for Turning Cutting Tools Finishing Cutting 10 PCS

Turning Inserts

Buy on Amazon Find on eBay

Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality

Size(IC): 6.35mm, Thickness(S): 2.38mm, Dimension(Φd): 2.8mm, Radius(R): 0.4mm, Angle: 7°

Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing

Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15.

Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting.

FomaSP CNMG431 / CNMG120404-PM of CNC Carbide Inserts for Steel Turning Cutting Tools, The Chip Breaker PM fit for Semi-Finishing Metal Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

Size: ΦIC: 12.7mm, Thickness(S): 4.76mm, Dimension(Φd)：5.16mm, Radius(R): 0.4mm, Nose Angle: 0°

Bi-colors yellow and black, CVD coated grade, with thick wear-resistance coating on the general gradient sintered substrate. Good use for steel continuous cutting as well as interrupted cutting.

Long processing life, high cost performance, with better working range, apply to steel wheel and hub, gear and so on.

Has more than 15 years of experience in producing carbide inserts

FomaSP CCMT32.51 / CCMT09T304-PM of CNC Carbide Inserts for Steel Turning Cutting Tools, The Chip Breaker"PM" fit for Semi-Finishing Metal Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

FomaSP CNC Milling Carbide Inserts Steel APKT1604PDSR Fit for Lathe Milling Cutting Tools 10pcs

Milling Inserts

Buy on Amazon Find on eBay

The PVD black coating tool is designed for machining steel, stainless steel and cast iron. It is resistant to wear and corrosion and suitable for finishing at low and medium cutting speeds.

Size, (I.W): 9.53mm, Radius(R): 0.6mm, Longth(L): 17.1mm, Thickness(S): 5.2mm, Dimension(Φd)：4.4mm

This cutting steel uses PVD coating technology, especially the addition of TiAIN layer, its coating microhardness of up to HV3200, can withstand 400-500℃ high temperature environment, excellent heat resistance, after coating treatment, the cutting edge is more sharp, to ensure efficient cutting operations.

This cutting steel has a long processing life and a very high cost performance.

Read more Read less

FomaSP CNC Carbide Turning Inserts for Metal Cutting WNMG332/WNMG060408-PM, The Chip Breaker"PM" fit for Semi-Finishing Steel Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

FomaSP Carbide Inserts for Aluminum CCGT32.51 / CCGT09T304 for Turning Carbide Aluminum Inserts Metal Cutting 10PCS

Turning Inserts

Buy on Amazon Find on eBay

Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality

Size(IC): 9.525mm, Thickness(S): 3.97mm, Dimension(Φd): 4.4mm, Radius(R): 0.4mm, Angle: 7°

Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing

Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15.

Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting.

FomaSP Carbide Inserts for Aluminum WNGG431 / WNMG080404 for Turning Cutting Tools 10 PCS

Turning Inserts

Buy on Amazon Find on eBay

Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality

Size(I.W): 12.7mm, Thickness(S): 4.76mm, Dimension(Φd): 5.16mm, Radius(R): 0.4mm

Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing

Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15.

Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting.

FomaSP MGMN200-M Carbide Grooving Inserts for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, PVD Coating, 10pcs

Internal Grooving Inserts

Buy on Amazon Find on eBay

FomaSP MGMN300-M Carbide Grooving Inserts for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, PVD Coating, 10pcs

Buy on Amazon Find on eBay

FomaSP DCMT32.51 / DCMT11T304-PM of CNC Carbide Inserts for Steel Turning Cutting Tools, The Chip Breaker"PM" fit for Semi-Finishing Metal Cutting, 10 PCS.

Turning Inserts

Buy on Amazon Find on eBay

FomaSP 1/4" Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels, HRC 55-4 Flute - (1 Piece, 1/4")

Square Nose End Mills

Buy on Amazon Find on eBay

FomaSP Ti-coated 15mm Square Carbide Cutter Inserts (15mmX15mm X2.5mm) for Woodturning Roughing Tool,10pcs

Square Nose End Mills

Buy on Amazon Find on eBay

STANDARD SIZE:15mm(Length)x15mm(Width)x2.5mm(Thick)-30°(Cutting angle),INDUSTRIAL QUALITY:Made of solid tungsten carbide,hard and durable

PVD Ti-coated Carbide Cutter have good thermal conductivity and make the machined surface is smoother

4 Sharpened razor edges which can be rotated to a new razor edge as one side becomes dull

Perfect for general purpose wood, chipboard, plywood and MDF/HDF cutting works

Environmental protection, high efficiency, energy saving, recyclable carbide cutters knife

FomaSP CNC Milling Carbide Inserts Steel APKT1003PDSR Fit for Lathe Milling Cutting Tools 10pcs

Milling Inserts

Buy on Amazon Find on eBay

With a black PVD coating, this carbide blade is especially suitable for machining steel, stainless steel and cast iron materials, providing precise and efficient finishing results at low to medium cutting speeds, ensuring smooth surfaces and accurate dimensions.

Size, (I.W): 6.66mm, Radius(R): 0.4mm, Longth(L): 10.37mm, Thickness(S): 3.5mm, Dimension(Φd)：2.8mm

This cutting steel uses PVD coating technology, especially the addition of TiAIN layer, its coating microhardness up to HV3200, showing excellent wear resistance, at the same time, it can withstand 400-500℃ high temperature environment, excellent heat resistance. After the coating treatment, the cutting edge is sharper, ensuring efficient cutting operations.

This cutting steel has a long processing life and a very high cost performance.

Read more Read less

FOMASP FAQs

Is FOMASP Legit?

Yes, FOMASP is a legitmate brand on Amazon. After conducting a comprehensive analysis of 129 customer reviews for FOMASP products on Amazon, we have determined its average rating. With a strong performance and good quality, FOMASP has received an average rating of 4.87 from numerous buyers, indicating that FOMASP are trustworthy and live up to their claims. Therefore, it is safe to make purchases from FOMASP on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more FOMASP products?

If you're interested in FOMASP and want to find more FOMASP products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type FOMASP in the search box and hit Enter to see the search results.
Find and click the correct FOMASP to go to the new page.
Select the products you want in the FOMASP buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more FOMASP products.

How does findthisbest choose the top FOMASP products?

We analyze millions of FOMASP products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase FOMASP products via FindThisBest?

Go to the FOMASP page.
Select the product you want in the FOMASP buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product FomaSP Carbide Inserts for Steel CCMT21.51 / CCMT0..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the FOMASP products?

Most of the FOMASP products are produced by FM and LH. The manufacturers provide FOMASP with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the FOMASP products, helping you make more informed buying decisions. We recommend best choices of the products from the FOMASP brand, helping you make better shopping choices with less time and energy.

Similar Brands

Uxcell

BEAMNOVA

Accusize Industrial Tools