HHIP feature image

HHIP

Review rating Review rating Review rating Review rating Review rating 4.4 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, HHIP has 306 products for sale. HHIP products range in price from $8.54 to $257.09, and the average price of all the products is about $62.66.

We found that most of the HHIP products are manufactured by ABS Import Tools, Inc., ABS Import Tools Inc., and ABS Import Tools Inc. The manufacturers provide HHIP with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase HHIP products on Amazon.com. The brand holds an average rating of 4.4, testifying to its excellent reputation.

HHIP Best Sellers

Last Updated: Jan 8, 2026

HHIP 3900-5526 Precision Sine Plate, 6" Length x 6" Width x 2.36" Height

Made of high grade tool steel that is hardened and precision ground to HRC 55-58
Two hardened side rails and one locking strap are included
Measures 6-inches Length by 6-inches width by 2.36-Inches height
Country of origin: United States

HHIP 8600-0041 28-Piece Transfer Punch Set – 3/32" to 1/2" by 64ths + 17/32", Precision Undersize .0025", Hardened Tool Steel, 4-7/8" Long, Black Oxide, Indexed Stand for Accurate Hole Transfer

COMPLETE PRECISION SET: The HHIP 8600-0041 transfer punch set includes 28 punches from 3/32" to 1/2" by 64ths plus 17/32", covering fractional hole sizes for layout, alignment, and transfer. Each punch is 4-7/8" long for secure handling and control.
ACCURATE UNDERSIZE FIT: Each punch is undersized by 0.0025" for a snug slip fit into drilled holes, ensuring precise center-point transfers. Ideal for duplicating or transferring threaded, drilled, or tapped holes onto mating parts accurately.
HARDENED TOOL STEEL CONSTRUCTION: Made from heat-treated and tempered carbon tool steel, each punch keeps tip integrity under repeated striking. Hardened ends resist deformation and mushrooming, giving long service life and precision in high-volume shops.
CORROSION-RESISTANT BLACK OXIDE FINISH: Each punch has protective black oxide coating to prevent rust and corrosion. The smooth low-glare finish enhances durability and reduces wear, ensuring reliable performance in toolboxes, shop and maintenance areas.
ORGANIZED METAL STORAGE INDEX: Comes in a labeled metal index stand to keep punches clean, sorted, and accessible. Improves workflow and eliminates guesswork. Note: Transfer punches need through holes; blind hole spotters and inserts sold separately.

HHIP 3900-0001 58 Piece Clamping Kit (5/8 Inch T-Slot) Stud Size 1/2-13

Comprehensive 58-Piece Set: Includes a full range of 1/2"-13 stud lengths, along with matching T-nuts, flange nuts, and coupling nuts, providing all necessary components for secure workpiece clamping.​
5/8" T-Slot Compatibility: The T-slot nuts are designed to fit standard 5/8" T-slots, ensuring compatibility with a wide range of milling machines and worktables.​
Durable Construction: Components are made from high-quality materials and heat-treated for enhanced strength and longevity, ensuring reliable performance under demanding conditions.​
Organized Storage: Comes with a convenient storage rack, keeping all pieces organized and easily accessible for quick setup and reduced downtime.​
Versatile Application: Ideal for securing workpieces during milling, drilling, and other machining operations, enhancing precision and safety in your workshop.

HHIP 1001-0201 Indexable Tool Set, 2 Boring Head, R8 Shank, 4 Boring Bars

Precision Boring Head: 2" boring head with micrometer lead screw provides 0.001" direct reading accuracy for smooth and reliable adjustments during machining
Versatile Boring Capacity: Offers a boring range from 0.394" to 5.906" diameter with a 5/8" offset and up to 1.970" boring depth for a wide range of applications; The cross hole is 1/2”
0.001" Graduation Precision: 1 DIV=0.001” which means when turning the dial by 1 division/graduation, the boring head's travel is 0.001” in radius movement and0.002” in diameter movement
R8 Shank Compatibility & Durable Boring Bars: Includes R8 shank with 7/16"-20 drawbar thread for secure fit on most milling machines, plus 4 indexable boring bars with TCMT 21.5 C6 carbide inserts for long-lasting performance on steel and alloys
Complete Tool Set: Comes with boring head, shank, 4 boring bars, T-handle and L-shaped hex wrenches plus a fitted carrying case, ensuring convenient setup, adjustments, and safe storage; Shipping weight: 4.55 lbs

HHIP 1011-0081 31 Piece 1/4-20 Helical STI Thread Repair Kit

Application: Thread Repair
Country of origin: China
Package Dimensions: 7" L x 2" W x 5" H
Package weight of the Product: 13.62 Ounces

HHIP 4200-0241 48 Piece Thread Wire Measuring Set

Measures all metric threads from .5mm to 6mm
48 wires in 16 different sizes. ~ Measures all 60° threads
3 to 48 threads per inch
Laminated chart included
Complete in vinyl case

HHIP 8600-0043 25 Piece 1-13mm Metric Transfer Punch Set

Punch length is 4-7/8"
Range is 1-13mm x 0.5mm
Heat treated tempered tool steel for longer life
Black oxide finish
Used for transferring of threaded, drilled and tapped holes

HHIP 3 X 1-3/4 X 2-3/8 INCH CAST Iron V Block Set (3402-1001)

Width of the V is 1-3/4.
Depth is 1-5/16.
Made of high quality casting, properly seasoned against distortion.
Machined square and parallel to meet standard specifications. Supplied in a matched pair.
W.T. (lbs.) 3

HHIP 4401-1597 6" X 8" X 2" Granite Surface Plate, Grade B, 0 Ledge

The top surface of this plate is precision ground to achieve a high degree of flatness and the accuracy is +/-.0001". It is a Grade B (Grade 1) plate.
Granite surface plates meet or exceed Federal Specifications GGG-P-463C and it includes a certificate of inspection. (Note that these are not NIST traceable.)
Granite plates are used for measuring the flatness and squareness of other objects, laying out parts, calibrating instruments, setting up tools, checking parallelism and perpendicularity, and measuring heights with the use of a height gage.
They are also used as a work surface for assembling, inspecting, and marking parts. Non-magnetic and non-conductive.
Surface plates are offered by HHIP in various sizes, with different levels of flatness and accuracy and are checked by an auto collimator for overall accuracy assurance.

HHIP 3601-0511 25 Piece 1/4-20, 5/16-18, 3/8-16, 7/16-14 Transfer Screw Set (Pack of 1)

Convenient and economic combination of four sizes often used together
Set includes 1 solid handle and 24 screws (6 pieces of each size)
More accurate than transfer punches
The fastest and most precise method of transferring threaded holes to mating parts
Great for tool and die work and in layouts

HHIP 3601-0519 25 Piece M6 x 1, M8 x 1.25, M10 x 1.5, M12 x 1.75 Transfer Screw Set

Convenient and economic combination of four sizes often used together
Set includes 4 handles and 24 screws
More accurate than transfer punches
The fastest and most precise method of transferring threaded holes to mating parts
Great for tool and die work and in layouts

HHIP-3901-0076 Adjustable Screw Jacks (Various Adjustable Ranges 23-30mm to 100 to 140mm)

Adjustable range is 23-30mm
M16 thread
Made from high quality tool steel
Measures 34mm diameter by 30mm height

HHIP ABS Import 8600-0032 Heavy Duty Arbor Press, 1 Ton Capacity, 5.63" Max Height (Pack of 1)

BEFORE YOU ORDER: PLEASE REVIEW ALL OF OUR PICTURES WITH THE PRODUCT SPECIFICATIONS. This will ensure you select the appropriate arbor press for your needs.
An arbor press is a precision tool designed for applying controlled force in a vertical direction. It consists of a lever and a ram, and it is typically used for tasks such as pressing bearings, bushings, or small components together.
Caution, Excessive force: Adding a cheater bar, which is essentially a longer lever, can exceed the press's intended load capacity, leading to potential damage or failure of the press itself. The increased force may cause the press components to bend, break, or malfunction.
If you require more force than your arbor press can provide, it's recommended to consider upgrading to a more robust press that suits your needs.
Heavy duty frame. Precision made. 4 position steel anvil. Steel pinions.

HHIP Pro Series 7080-0302 Vertex Dead Blow Hammer, Deadblow Mallet w/UPE Plastic Face, 1.2” Diameter Steel Shot Head, Non-Marring, 16 oz

APPLICATIONS: Vertex dead-blow hammers are best used as a multi-purpose striking tool, perfect for sustained and effective blows without recoil; These high quality hammers are used in assembly, toolmaking, shopfitting, and repair and maintenance work
ADVANTAGES: This deadblow hammer's tubular head is partially filled with steel shot to efficiently transfer energy to the workpiece after a slight delay; Reduced rebound allows the impact to be absorbed effectively, safely, and quietly, providing utmost for the user
MAXIMUM FORCE: Our steel tube hammers have powder-coated heads welded to an ergonomic non slip rubber grip handle and replaceable white nylon UPE faces; Hollow head partially filled with steel delivers dead blows with maximum impact
ONE TOUGH TOOL: The face of the HHIP Pro Series 7080-0302 Vertex Dead Blow Hammer is made of a super durable, tough material (65D) with the highest impact strength; Shot loaded interior produces a powerful driving force
HAMMER SPECS: 1.2” Head Diameter, 11” Total Length; Available in 3 different weights – 16oz, 29oz and 46oz; Tool is resistant to industrial chemicals and is non-marring and non-sparking

Pro Series by HHIP 4102-0012 Plug Gage Handle, 0.061" - 0.25" Measuring Range

Comfortable, easy to use and ergonomically made handle for pin gages.
These gold handles can be used with a GO pin on the green end and a NO GO pin on the red or opposite end
Made from powder coated aluminum.
Handles are clearly marked with the appropriate pin gage sizes.
Each handle has two wide range collets featuring a spring adjusting and self-centering design.

HHIP 4400-0025 1" Dial Indicator and Magnetic Back Set

Precision Dial Indicator: Features a 1" travel range and 2" diameter dial face for accurate and easy-to-read measurements
Durable Contact Point: Equipped with an interchangeable 4-48 thread contact point made of hardened stainless steel for long-lasting performance; Indicator stem diameter is 3/8”
Smooth Jeweled Movement: Ensures high sensitivity and accuracy during precise measurement applications
Magnetic Back with Protective Coating: Includes a 2-1/4" diameter magnetic base with screw-on/off design for secure mounting on metal surfaces
Versatile & Professional Use: Ideal for machining, alignment, calibration, and inspection tasks in both industrial and workshop settings; Shipping weight: 0.65 lb

HHIP 4401-0042 Mity-Mag Indicator Holder

Zinc die cast housing
45 lbs. holding power
Holds up to 3/8" diameter stems
5 locations for mounting accessories
Holder Dimensions are 4-1/2" X 1" X 1-1/4"

HHIP 3600-0042 Machinists' Bench Block (Holes 1/8~5/8 Inch)

Made from hardened and ground steel. Block has a 3" diameter and is 1 1/2" tall.
A handy tool for holding work when driving pins, drilling, etc.
The knurled side provides a good gripping surface.
V-groove across the face accommodates round and odd shaped stock.
Holes from 1/8 to 5/8" diameter.

HHIP 3900-2112 58-Piece Clamping Kit – 7/16" T-Slot, 3/8-16 Studs, Forged Alloy Steel Step Blocks, T-Nuts, Flange Nuts & Clamps with Storage Rack, Heat-Treated Workholding Set for Milling Machines

COMPLETE 58-PIECE WORKHOLDING KIT: Includes 4 each of 3", 4", 5" & 6" studs (3/8-16), 4 coupling nuts, 6 flange nuts, 6 forged steel step clamps, 6 T-nuts, 12 step blocks, wrench, and rack. Provides everything for secure, repeatable clamping.
7/16-INCH T-SLOT COMPATIBILITY: Fits standard 7/16" T-slots on Bridgeport-type mills and many worktables. Ensures precise alignment and tight fit for reliable fixture positioning and maximum holding power during milling, drilling, or setup operations.
FORGED ALLOY STEEL CONSTRUCTION: All components are made from high-strength alloy steel and heat-treated for durability and dimensional stability. They withstand vibration and impact while maintaining smooth threads and secure engagement over years.
CORROSION-RESISTANT FINISH & RACK STORAGE: Each piece is precision-finished with protective coating for rust resistance and smooth operation. It has compact metal storage rack keeping studs, nuts and clamps organized for quick setup and efficient workflow
VERSATILE APPLICATION FOR PRECISION SETUPS: Perfect for securing vises, fixtures and workpieces during milling, boring, tapping, machining. A shop essential for toolmakers, fabricators and technicians needing accuracy, safety and repeatable workholding.

HHIP FAQs

Yes, HHIP is a legitmate brand on Amazon. After conducting a comprehensive analysis of 2,899 customer reviews for HHIP products on Amazon, we have determined its average rating. Offering great value and satisfying quality, HHIP has achieved a respectable rating of 4.4 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from HHIP on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in HHIP and want to find more HHIP products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type HHIP in the search box and hit Enter to see the search results.
  3. Find and click the correct HHIP to go to the new page.
  4. Select the products you want in the HHIP buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more HHIP products.

We analyze millions of HHIP products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 306 HHIP products for sale, 19 of which were analyzed in detail and recommended to customers.

  1. Go to the HHIP page.
  2. Select the product you want in the HHIP buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product HHIP 3900-5526 Precision Sine Plate, 6" Length x 6..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the HHIP products are produced by ABS Import Tools, Inc., ABS Import Tools Inc., and ABS Import Tools Inc. The manufacturers provide HHIP with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the HHIP products, helping you make more informed buying decisions. We recommend best choices of the products from the HHIP brand, helping you make better shopping choices with less time and energy.