HiLetgo feature image

HiLetgo

Review rating Review rating Review rating Review rating Review rating 4.5 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, HiLetgo has 306 products for sale. HiLetgo products range in price from $5.99 to $19.99, and the average price of all the products is about $10.21. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase HiLetgo products from the seller HiLetgo. The brand holds an average rating of 4.5, testifying to its excellent reputation.

HiLetgo Best Sellers

Last Updated: Jan 12, 2025

HiLetgo 3pcs ESP32 ESP-32D ESP-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP

ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.

HiLetgo 5pcs Digital LCD Thermometer Temperature Digital LCD Fridge Thermometer Water Temperature with Probe Fahrenheit

Digital LCD Fridge Thermometer, It only suitable for Fahrenheit,not for Celsius
Temperature range: -50~ 230 Fahrenheit
Temperature display resolution: 0.1
Probe wire: 1M Length
Size: 47*28*14mm

HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE

2.4GHz Dual Mode WiFi + Bluetooth Development Board
Ultra-Low power consumption, works perfectly with the Arduino IDE
Support LWIP protocol, Freertos
SupportThree Modes: AP, STA, and AP+STA
ESP32 is a safe, reliable, and scalable to a variety of applications

HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger

The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
Fault-tolerant design, even if the control line is broken, the relay will not move.
The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
The Module can be set by jumper high or low trigger.

HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32

Driver element: a-Si TFT active matrix
Resolution (dots): 240RGB*320Dots
Viewing Direction: 6 o'clock
Pixel arrangement: RGB vertical stripe
With PCB plate (including power supply IC, SD), compatible with 5110 interface

HiLetgo 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head
Wave length: 650nm
Wide range of wroking temperature: -10°C to +40°C
Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication

HiLetgo 2pcs LM2596 Adjustable DC-DC Step Down Buck Power Convert Module 4.0-40V Input to 1.25-37V Output with LED Voltmeter Display

LM2596 DC-DC Buck Step-down Power Converter Module
4.0-40V to 1.25-37V LED Voltmeter
output voltage range of 1.25V ~ 37V

HiLetgo 1.8" inch ST7735R SPI 128 * 160 TFT LCD Display Module with PCB

Durable hard PCB board and metal, ideal for 1602 interface
Welded by reflow soldering, no burrs, comfortable and safe
Power supply IC and SD card slot, convenient to uses
Transparent protective film covered on the display protect it from damage
Suitable for beginners of LCD color display module,SCM learners and LCD enthusiasts

HiLetgo 10pcs Micro Limit Switch KW12-3 AC 250V 5A SPDT 1NO 1NC Micro Switch Normally Open Close Limit Switch with Roller Lever Arm Black

KW12-3 Roller Lever Arm Micro Limit Switch, Normally Open and Close Diamension: 20 x 10.5 x 6.5mm (L x W x H)
Contact spacing is small,short stroke action,according to the power of small,fast-break.
Rated voltage: AC 125V-250V; Current rating: 5A
Application:Apply in A computer mouse, car mouse, automobile electronic products, communications equipment, military products, test instrument, gas water heater, gas burner, small home appliance, microwave oven, electric rice cooker, floating ball supporting equipment, medical equipment, building automation, electric tools, ect.

HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip.
Easy to use, low cost, and applicable to equipment development and card reader development etc.
Applicable for the user who need to design or manufacture the RF card terminal.
The module can be directly loaded into the various reader molds.
The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.

HiLetgo 3pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions

Input interface: Type-c USB.
Battery overcharge lifting voltage: 4.00 V
Battery: over-current protection current 3 A
Maximum charging current output: 1000 ma
Light state: no load the light not bright, red light for recharging, is full of green light.

HiLetgo 5pcs DS18B20 Temperature Sensor Temperature Probe Stainless Steel Package Waterproof 1M

DS18B20 Temperature Sensor Cable with Probe(Pack of 5)
Wiring: Red(VCC), Yellow(Data), Black(GND)
Wide temperature range of -55 ℃ ~ +125 ℃
Power supply: 3.0V ~ 5.5V
Tips: Using a 4.7K resistor between the Data and VCC will make the testing of the probe easilier.

HiLetgo 2pcs Water Pump 240L/H DC 12V 4.2W Micro Brushless Pump 3M Pumping Head Ultra Quiet Water Pump for Pool Aquarium Fish Tank

Brushless, permanent magnetic rotor. Super long working life(more than 30000 hours).
Adopt high performance ceramic shaft. The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems.
Size: 5.5cm x 3.5cm x 4.5cm.
Water proof class: IP68(can be submersible installed).
Power supply: Solar panel, DC electric source, battery.

HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino

MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor
Communication mode: standard IIC communication protocol
Chip built-in 16bit AD converter, 16bit data output
Gyroscopes range: +/- 250 500 1000 2000 degree/sec
Acceleration range: ±2 ±4 ±8 ±16g

HiLetgo 2pcs 0.28" Digital Voltmeter Ammeter DC 100V 10A Amp Voltage Current Meter Tester 0.28 Inch 3 Bits Blue + Red Dual LED Display Panel with Connect Wires

0.28" Digital Voltmeter Ammeter DC 100V 10A Blue + Red Dual LED Display
10A Amp Voltage Current Meter Tester with 3 Bits Blue + Red Dual LED Display
Operating voltage: DC 4 ~ 30V; Measure voltage: DC 0 ~ 100V; Minimum resolution (V): 0.1V
Operating Current:

HiLetgo FT232RL Mini USB to TTL Serial Converter Adapter Module 3.3V/5.5V

Chipset: FT232RL, not genuine FTDI chip, Working Voltage: 3.3V/5.5V
RXD/TXD transceiver communication indicator, with 500MA self-restore Fuse
Pin Definition: DTR,RXD,TX,VCC,CTS,GND
Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit /Vsita/, do not Support Win8

HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board TP4056 Lithium Battery Charging Board Micro USB Charge Module With Protect

HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board
Input Voltage: 5V
Charging cut-off voltage: 4.2V ± 1%
Maximum charge current: 1000mA

HiLetgo 10pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional 3.3V-5V Shifter Module for Arduino

The bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time
Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side
3.It can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage

HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)

Built-in Micro-USB, with flash and reset switches, easy to program
Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
Data download access to the website: http://www;nodemcu;com

HiLetgo 5pcs IPX IPEX-1 U.FL to SMA Female Pigtail Antenna Wi-Fi Coaxial Low Loss Cable 6 inch (15cm)

Connector 1:SMA Female straight
Connector 2:IPX/U.FL Connector
Impendence :50 ohm
Cable Length: 6 inch (15cm)

HiLetgo FAQs

Yes, HiLetgo is a legitmate brand on Amazon. After conducting a comprehensive analysis of 6,773 customer reviews for HiLetgo products on Amazon, we have determined its average rating. Offering great value and satisfying quality, HiLetgo has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from HiLetgo on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in HiLetgo and want to find more HiLetgo products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type HiLetgo in the search box and hit Enter to see the search results.
  3. Find and click the correct HiLetgo to go to the new page.
  4. Select the products you want in the HiLetgo buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more HiLetgo products.

We analyze millions of HiLetgo products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 306 HiLetgo products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the HiLetgo page.
  2. Select the product you want in the HiLetgo buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product HiLetgo 3pcs ESP32 ESP-32D ESP-32 CP2012 USB C 38..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the HiLetgo products, helping you make more informed buying decisions. We recommend best choices of the products from the HiLetgo brand, helping you make better shopping choices with less time and energy.