Hiteuoms

5.0

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Hiteuoms has 15 products for sale. Hiteuoms products range in price from $7.59 to $26.99, and the average price of all the products is about $11.63. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase Hiteuoms products from the seller Hiteuoms. The brand holds an average rating of 4.96, testifying to its excellent reputation.

Hiteuoms Best Sellers

Last Updated: Jan 10, 2026

Hiteuoms 3.7V 3000mAh Rechargeable Battery 1S 1C LiPo for Arduino NodeMCU ESP32 Development Board, with JST 1.25 Plug Protection Board and Insulated Rubber Tape

3.7V Batteries

Buy on Amazon Find on eBay

[Application] Hiteuoms 3.7V 3000mAh batteries are perfect for ESP32 projects or a small Internet of Things (IoT) project. Also suitable for Bluetooth speaker, keyboard, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, wireless, IoT and so on. (NOTE!!! The maximum operating current of this is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current)

[Reliable Performance] This 3.7 volt rechargeable battery provides reliable performance, no leakage and long cycle life. PCM protection function: overcharge, over discharge, over current, short circuit protection, over temperature protection. It also complies with UN 38.3 standards certification, ensuring safety and reliability

[3000mAh LiPo] Great large capacity li-po pack for dev board projects. The recommended charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V

[Specifications] Dimensions: 67*36*10mm/ 2.64*1.41*0.39inch; Weight: 50g; Capacity: 3000mAh; Volt: 3.7V. Plug: JST 1.25; Discharge Rate: 1C. ( WARNING: Connector's RED wire is positive electrode“+”.BLACK wire is negative electrode“-”. Confirm polarity of the connector and your device before connection!)

[Storage & Usage] When storing battery for a long time, please keep the in a state of 40%-60%. We recommend to charge the every 3 months after receipt of the and maintain the voltage 3.7-4.0V. Store in cool and dry place

Read more Read less

Hiteuoms Amass XT60 Connector Plug Cable - Female and Male Connectors Adapter with 12AWG 100mm Silicon Wire for RC Lipo Battery Cable Drone Car Boat (6PCS)

RC Servo Plugs & Wires

Buy on Amazon Find on eBay

[Upgrade XT60 Connector] These are original nylon Amass XT60 plugs with a tight fit, ensuring a solid connection for minimal resistance.

[XT60 Extension Cord] 12AWG cable length is 100mm/about 4 inches (excluding plug), which solves the problem of difficult soldering because the wire is too short. The end of the pigtail has been stripped and pre-tinned, saving soldering time.

[12AWG Silicone Copper Wire] Ultra Flexible Soft Silicone Tinned Copper Wire! Super Low Impedance for a highly efficient connection. Temp: -60 degree celsius +200 degree celsius, Rated Voltage: 600V,Bear Current: 30A.

[Application] XT60 adapter cable is used for RC battery connection, such as RC cars/vehicles/trucks, boats, drones/quadcopters.

[Packing List] 6PCS/3 Pairs female and male connectors adapters with 100mm/about 4 inches cables wires. Our team always insists customer first and offers one year After-sale Service.

Read more Read less

Hiteuoms 3.7V 2000mAh Rechargeable Battery 1S 1C LiPo Battery for IoT NodeMCU ESP32 Development Board IoT Project with JST 1.25 Plug Protection Board and Insulated Rubber Tape 4PCS

3.7V Batteries

Buy on Amazon Find on eBay

[Application] It perfect for ESP32 projects or a small Internet of Things (IoT) project. Also suitable for Bluetooth speaker, keyboard, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, wireless, IoT and so on. (NOTE!!! The maximum operating current of this 2000mah is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current)

[Reliable Performance] It provides reliable performance, no leakage and long cycle life. PCM protection function: overcharge, over discharge, over current, short circuit protection, over temperature protection

[2000mAh] Great large capacity li-po pack for dev board projects. The recommended 2000mah charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V

[Specifications] Dimensions: 53 * 34 * 10 mm /2.09 * 1.34 * 0.39inch(L*W*H); Weight: 36g; Capacity: 2000mAh; Volt: 3.7V. Plug: JST 1.25; Discharge Rate: 1C. ( WARNING: Connector's RED wire is positive electrode“+”.BLACK wire is negative electrode“-”. Confirm polarity of the connector and your device before connection! WRONG CONNECTION MAY CAUSE PRODUCT FAILURE.)

[Storage & Usage] When storing for a long time, please keep the 2000mah in a state of 40%-60%. We recommend to charge the 2000mah every 3 months after receipt of the 2000mah and maintain the voltage 3.7-4.0V. Store in cool and dry place

Read more Read less

Hiteuoms 3.7V 3000mAh Rechargeable Battery 1S 1C LiPo Battery for ESP32, Raspberry Pi, IoT, Speaker and Wireless Device with JST 1.25 Plug Protection Board and Insulated Rubber Tape

3.7V Batteries

Buy on Amazon Find on eBay

[Specifications] Dimensions: 67*36*10mm/ 2.64*1.41*0.39inch; Weight: 50g; Capacity: 3000mAh; Volt: 3.7V. Plug: JST 1.25; Discharge Rate: 1C.(WARNING: Connector's RED wire is positive electrode“+”.BLACK wire is negative electrode“-”. Confirm polarity of the connector and your device before connection!)

[Reliable Performance] This provides reliable performance, no leakage and long cycle life. PCM protection function: overcharge, over discharge, over current, short circuit protection, over temperature protection.

[3000mAh Battery] Great large capacity li-po pack for dev board projects. The recommended charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V

[Storage & Usage] When storing for a long time, please keep it in a state of 40%-60%. We recommend to charge it every 3 months after receipt of it and maintain the voltage 3.7-4.0V. Store it in cool and dry place

[Application] Hiteuoms 3000mAh are perfect for Raspberry Pi or a small Internet of Things (IoT) project. Also suitable for Bluetooth speaker, keyboard, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, wireless, IoT and so on. (NOTE!!! The maximum operating current of it is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current)

Read more Read less

Hiteuoms Dupont Connector Kit I2C Qwiic Cable Kit Stemma QT Wire for SparkFun Development Boards Sensor Board Breakout Breadboard 4 Pin Sh1.0 Connector 14PCS

Prototyping Boards

Buy on Amazon Find on eBay

[Multiple Length Options] Includes 14pcs cables of various lengths and styles (100mm,200mm, 300mm, 500mm, SH1.0 connector and breadboard Jumper and Female Jumper) that will get your Qwiic boards connected together.

[Color Scheme] Each Qwiic Cable's wires have been color coded to red, black, blue and yellow. All Qwiic cables have the following color scheme and arrangement: Black = GND; Red = 3.3V; Blue = SDA; Yellow = SCL.

[Easy to Connect] Uses SH1.0-4P connector kits to quickly hook up sparkfun and development boards with sensors, LCDs, relays and more.

[Application] In addition to being suitable for SparkFun development boards and sensor boards, the female and male dupont connector also suitable for Raspberry pi, ESP32 and Arduino development boards.

[Packing List] 100mm cable x 3; 200mm cable x 3; 300mm cable x 2; 500mm cable x 2; 150mm Breadboard Jumper (4-pin) cable x 2; 150mm female Jumper (4-pin) cable x 2.

Read more Read less

Hiteuoms Dupont Connector Kit I2C Qwiic Cable Kit Stemma QT Wire for SparkFun Development Boards Sensor Board Breakout Breadboard 4 Pin Sh1.0 Connector 28PCS

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

[Multiple Length Options] Includes 28pcs cables of various lengths and styles (100mm,200mm, 300mm, 500mm, SH1.0 connector and breadboard Jumper and Female Jumper) that will get your Qwiic boards connected together.

[Easy to Connect] Uses SH1.0-4P connector kits to quickly hook up sparkfun and development boards with sensors, LCDs, relays and more

[Packing List] 100mm cable x 6; 200mm cable x 6; 300mm cable x 4; 500mm cable x 4; 150mm Breadboard Jumper (4-pin) cable x 4; 150mm female Jumper (4-pin) cable x 4.

Read more Read less

Hiteuoms Deans Connector T Plug - RC Battery Connector, Deans Female and Male Adapter with 14AWG 100MM Silicone Wire for RC Lipo Battery Cable Drone Car (5 Pairs)

RC Servo Plugs & Wires

Buy on Amazon Find on eBay

[Deans T Extension Cable] 14AWG cable length is 100mm/about 4 inches (excluding plug), which solves the problem of difficult soldering because the wire is too short. The end of the pigtail has been stripped and pre-tinned, saving soldering time

[Application] RC cable wire plug is used for RC Li-polymer battery connection, such as RC cars/vehicles/trucks, boats, drones/helicopter, RC hobby

[T Plug Connector] Material: Durable flame retardant gold plated copper and hard plastic with a tight fit, ensuring a solid connection for minimal resistance. Max. current: about 120A

[14AWG Silicone Copper Wire] Ultra Flexible Soft Silicone Tinned Copper Wire! Super Low Impedance for a highly efficient connection. Temp: -60 degree celsius +200 degree celsius; Rated Voltage: 600V; Rated current: 25A

[Packing List] 10PCS/5 Pairs female T plug cable and male T plug cable with 100mm/about 4 inches cables wires. Our team always insists customer first and offers one year After-sale Service

Read more Read less

Hiteuoms Amass XT60H Connector Plug Cable - Female and Male (XT60 Upgrade Plug) Connectors Adapter with 12AWG 100mm Silicon Wire for RC Lipo Battery Cable Drone Car Boat (6PCS)

RC Servo Plugs & Wires

Buy on Amazon Find on eBay

[Upgrade XT60H Connector] These are original nylon Amass XT60H with Snap on Covers and fit tightly to ensure a solid connection with minimal resistance.

[XT60H Extension Cord] 12AWG cable length is 100mm/about 4 inches (excluding plug), which solves the problem of difficult soldering because the wire is too short. The end of the pigtail has been stripped and pre-tinned, saving soldering time.

[Application] XT60H adapter cable is used for RC battery connection, such as RC cars/vehicles/trucks, boats, drones/quadcopters.

[Packing List] 6PCS/3 Pairs female and male connectors adapters with 100mm/about 4 inches cables wires. Our team always insists customer first and offers one year After-sale Service.

Read more Read less

Hiteuoms Amass XT60 Connector Plug Cable - Female and Male Connectors Adapter with 12AWG 100mm Silicon Wire for RC Lipo Battery Cable Drone Car Boat (10PCS)

RC Battery Chargers

Buy on Amazon Find on eBay

[Upgrade XT60 Connector] These are original nylon Amass XT60 plugs with a tight fit, ensuring a solid connection for minimal resistance.

[Application] XT60 adapter cable is used for RC battery connection, such as RC cars/vehicles/trucks, boats, drones/quadcopters.

[Packing List] 10PCS/5 Pairs female and male connectors adapters with 100mm/about 4 inches cables wires. Our team always insists customer first and offers one year After-sale Service.

Read more Read less

Hiteuoms Amass XT30 Connector Plug Cable - Female and Male Connectors Adapter with 16AWG 100mm Silicon Wire for RC Lipo Battery Cable Drone Car Boat (6PCS)

RC Servo Plugs & Wires

Buy on Amazon Find on eBay

[Upgrade XT30 Connector] These are original nylon Amass XT30 plugs with a tight fit, ensuring a solid connection for minimal resistance.

[XT30 Extension Cord] 16AWG cable length is 100mm/about 4 inches (excluding plug), which solves the problem of difficult soldering because the wire is too short. The end of the pigtail has been stripped and pre-tinned, saving soldering time.

[16AWG Silicone Copper Wire] Ultra Flexible Soft Silicone Tinned Copper Wire! Super Low Impedance for a highly efficient connection. Temp: -60 degree celsius +200 degree celsius, Rated Voltage: 600V, Bear Current: 12A.

[Application] XT30 adapter cable is used for RC battery connection, such as RC cars/vehicles/trucks, boats, drones/quadcopters.

[Packing List] 6PCS/3 Pairs female and male connectors adapters with 100mm/about 4 inches cables wires. Our team always insists customer first and offers one year After-sale Service.

Read more Read less

Hiteuoms Deans Connector T Plug - RC Battery Connector, Female and Male Deans Adapter with 14AWG 100MM Silicone Wire for RC Lipo Battery Cable Drone Car (3 Pairs)

RC Servo Plugs & Wires

Buy on Amazon Find on eBay

[Application] T plug connector is used for RC Li-polymer battery connection, such as RC cars/vehicles/trucks, boats, drones/helicopter, RC hobby

[Deans Connector] Material: Durable flame retardant gold plated copper and hard plastic with a tight fit, ensuring a solid connection for minimal resistance. Max. current: about 120A

[Packing List] 6PCS/3 Pairs female T plug cable and male T plug cable with 100mm/about 4 inches cables wires. Our team always insists customer first and offers one year After-sale Service

Read more Read less

Hiteuoms 3.7V 2000mAh 1S 1C with JST 2.0mm Connector Protection Board and Insulated Rubber Tape for Raspberry Pi, IoT, Speaker and Wireless Device

3.7V Batteries

Buy on Amazon Find on eBay

[Application] There are perfect for Raspberry Pi or a small Internet of Things (IoT) project. Also suitable for Bluetooth speaker, keyboard, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, wireless, IoT and so on. (NOTE!!! The maximum operating current of this is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current)

[2000mAh LiPo Battery] Great large capacity li-po pack for dev board projects. The recommended charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V

[Specifications] Dimensions: 53 * 34 * 10 mm /2.09 * 1.34 * 0.39inch(L*W*H); Weight: 36g; Capacity: 2000mAh; Volt: 3.7V. Plug: JST 2.0; Discharge Rate: 1C. ( WARNING: Connector's RED wire is positive electrode“+”.BLACK wire is negative electrode“-”. Confirm polarity of the connector and your device before connection! WRONG CONNECTION MAY CAUSE PRODUCT FAILURE.)

[Storage & Usage] When storing it for a long time, please keep the in a state of 40%-60%. We recommend to charge the every 3 months after receipt of this and maintain the voltage 3.7-4.0V. Store in cool and dry place

Read more Read less

Hiteuoms 3.7V 2000mAh 1S 1C LiPo for IoT NodeMCU ESP32 Arduino Development Board Project with JST 1.25 Plug Protection Board and Insulated Rubber Tape

3.7V Batteries

Buy on Amazon Find on eBay

[Application] There are perfect for ESP32 projects or a small Internet of Things (IoT) project. Also suitable for Bluetooth speaker, keyboard, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, wireless, IoT and so on. (NOTE!!! The maximum operating current of this LiPo is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current)

[Specifications] Dimensions: 53 * 34 * 10 mm /2.09 * 1.34 * 0.39inch(L*W*H); Weight: 36g; Capacity: 2000mAh; Volt: 3.7V. Plug: JST 1.25; Discharge Rate: 1C. (WARNING: Connector's RED wire is positive electrode“+”.BLACK wire is negative electrode“-”. Confirm polarity of the connector and your device before connection! WRONG CONNECTION MAY CAUSE PRODUCT FAILURE.)

[Reliable Performance] This LiPo provides reliable performance, no leakage and long cycle life. PCM protection function: overcharge, over discharge, over current, short circuit protection, over temperature protection.

[2000mAh Battery] Great large capacity li-po pack for dev board projects. The recommended charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V

[Storage & Usage] When storing it for a long time, please keep this in a state of 40%-60%. We recommend to charge this every 3 months after receipt of this and maintain the voltage 3.7-4.0V. Store in cool and dry place

Read more Read less

Hiteuoms 12PCS EC5 Connector Banana Plug Female Male 5.0mm Gold Bullet Connectors for RC Battery ESC Device Electric Motor

RC Servo Plugs & Wires

Buy on Amazon Find on eBay

VALUE PACKAGE - 6 FEMALE & 6 MALE CONNECTORS：Comes with 6 female EC5 connectors, 6 male EC5 connectors, and matching 5mm bullets, perfectly catering to small-to-medium batch RC projects or electrical wiring needs without excess inventory waste

100A CONTINUOUS CURRENT CAPACITY：Supports up to 100 continuous Amps when paired with 10 AWG wire, delivering stable and consistent power transmission for high-demand devices, RC vehicles, and Li-polymer batteries

PREMIUM DURABLE MATERIALS：Crafted from high-purity copper (for exceptional conductivity) and robust insulating plastic, 100% brand-new and precision-manufactured for long-lasting reliability and repeated usage

SAFE & SECURE CONNECTION DESIGN：Boasts a tight-fit structure that prevents reverse polarity connections and short-circuit risks; engineered with both convenience and safety in mind for worry-free wiring operations

WIDE APPLICABILITY FOR RC & ELECTRICAL PROJECTS：Ideal for all RC hobbies (cars, boats, planes, helicopters), LiPo batteries, and general electrical applications, serving as a versatile solution for both DIY enthusiasts and professional users

Read more Read less

Hiteuoms 3.7V 1100mAh Battery 1S 1C Rechargeable Battery for IoT NodeMCU ESP32 Development Board IoT Project with JST 1.25 Plug Protection Board and Insulated Rubber Tape

3.7V Batteries

Buy on Amazon Find on eBay

[Application] Hiteuoms 3.7V 1100mAh Batteries are perfect for ESP32 projects or a small Internet of Things (IoT) project. Also suitable for Bluetooth speaker, keyboard, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, wireless, IoT and so on. (NOTE!!! The maximum operating current of this 1100mah is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current)

[1100mAh Battery] Great large capacity li-po pack for dev board projects. The recommended charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V

[Specifications] Dimensions: 42 * 25 * 10mm /1.65 * 0.98 * 0.39inch(L*W*H); Weight: 20g; Capacity: 1100mAh; Volt: 3.7V. Plug: JST 1.25; Discharge Rate: 1C. (WARNING: Connector's RED wire is positive electrode“+”.BLACK wire is negative electrode“-”. Confirm polarity of the connector and your device before connection! WRONG CONNECTION MAY CAUSE PRODUCT FAILURE.)

[Storage & Usage] When storing it for a long time, please keep this in a state of 40%-60%. We recommend to charge every 3 months after receipt of the 1100mah and maintain the voltage 3.7-4.0V. Store in cool and dry place

Read more Read less

Hiteuoms FAQs

Is Hiteuoms Legit?

Yes, Hiteuoms is a legitmate brand on Amazon. After conducting a comprehensive analysis of 22 customer reviews for Hiteuoms products on Amazon, we have determined its average rating. With a strong performance and good quality, Hiteuoms has received an average rating of 4.96 from numerous buyers, indicating that Hiteuoms are trustworthy and live up to their claims. Therefore, it is safe to make purchases from Hiteuoms on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more Hiteuoms products?

If you're interested in Hiteuoms and want to find more Hiteuoms products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type Hiteuoms in the search box and hit Enter to see the search results.
Find and click the correct Hiteuoms to go to the new page.
Select the products you want in the Hiteuoms buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Hiteuoms products.

How does findthisbest choose the top Hiteuoms products?

We analyze millions of Hiteuoms products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase Hiteuoms products via FindThisBest?

Go to the Hiteuoms page.
Select the product you want in the Hiteuoms buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Hiteuoms 3.7V 3000mAh Rechargeable Battery 1S 1C L..., you can view it on Amazon page.
Place your order on Amazon.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the Hiteuoms products, helping you make more informed buying decisions. We recommend best choices of the products from the Hiteuoms brand, helping you make better shopping choices with less time and energy.

Similar Brands

ZCBY ZHONG CHENG BO YANG

Lavendex

Loke BattleMats

Nsrzua