A ACT ACCU-CUT feature image

A ACT ACCU-CUT

Review rating Review rating Review rating Review rating Review rating 4.7
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, A ACT ACCU-CUT has 6 products for sale. A ACT ACCU-CUT products range in price from $20.99 to $47.99, and the average price of all the products is about $34.66.

We found that most of the A ACT ACCU-CUT products are manufactured by ACCUCUT. The manufacturer provides A ACT ACCU-CUT with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase A ACT ACCU-CUT products from the seller ACT-endmill. The brand holds an average rating of 4.72, testifying to its excellent reputation.

A ACT ACCU-CUT Best Sellers

Last Updated: Jan 11, 2025

ACCUCUT I4KEL 1/2” Carbide Square End Mill- 4 Flute Milling Bit for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50 - AlTiN Coating CNC Router Bit, 45 Degree Helix

Square Nose End Mills
ACCUCUT I4KEL 1/2” Carbide Square End Mill- 4 Flute Milling Bit for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50 - AlTiN Coating CNC Router Bit, 45 Degree Helix Cover
Buy on Amazon Find on eBay
General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
4 Flute Cutter: It has uniqe geometry and strong cutting edge. 4 flute is great for speedy cutting. Ideal for planar, step, groove, forming surface while the 45 degree helix design can perform smooth surface finish, better chip removal control than those with lower helix degree.

ACCUCUT I1AES 1/4” O Flute Carbide End Mill, Single Flute CNC Router Milling Bit for Aluminum, Wood, Copper, Alloys, Non-Ferrous, Plastic and Soft Materials

Square Nose End Mills
ACCUCUT I1AES 1/4” O Flute Carbide End Mill, Single Flute CNC Router Milling Bit for Aluminum, Wood, Copper, Alloys, Non-Ferrous, Plastic and Soft Materials Cover
Buy on Amazon Find on eBay
Application: perfect for aluminum, brass, plastics, exotic composites, wood, and any soft metals. Please note that they are not recommended for steel.
Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we select is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
High Rake & Lower Helix Design: High relief design produces sharper edge for improved shearing action while transferring heat into the chip, lower helix reduces lifting forces, making design preferable for fiber-reinforced applications and vacuum table setups.
Single Flute and Sharp Edge: 1 flute is for faster rates compared to conventional multi-flute tools. The unique single cutting edge design creates more space for chip evacuation, allowing faster feed rates and higher chip loads, designd for improved shearing action while transferring heat into the chip.
Upcut End Mill: Right hand spiral, right hand cut can minimize upward forces. The bottom surface of the workpiece will be cleanly cut with as little chips as possible.

ACCUCUT Chamfer End Mill - 60 Degree, V Groove, 3/8” Carving Bits for Alloy Steel, Aluminum, Wood - I2DMS 2 Flute Carbide End Mill for Chamfering, Deburring, Spotting & Side Milling - AlTiN Coating

Chamfer End Mills
ACCUCUT Chamfer End Mill - 60 Degree, V Groove, 3/8” Carving Bits for Alloy Steel, Aluminum, Wood - I2DMS 2 Flute Carbide End Mill for Chamfering, Deburring, Spotting & Side Milling - AlTiN Coating Cover
Buy on Amazon Find on eBay
General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40.
Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 30 per side.
35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its greater strength and capability to carry a larger chip load.

ACCUCUT I2KES 2 Flute 5/16” Carbide Square End Mill - Milling Bit Set for Aluminum, Steel, Copper, Plastic & Alloys - 35 Degree Helix, AlTiN Coating CNC Router Bit (4 pcs)

Square Nose End Mills
ACCUCUT I2KES 2 Flute 5/16” Carbide Square End Mill - Milling Bit Set for Aluminum, Steel, Copper, Plastic & Alloys - 35 Degree Helix, AlTiN Coating CNC Router Bit (4 pcs) Cover
Buy on Amazon Find on eBay
General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 30.
Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we select is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
Large Flute Gullet: 2 flute end mills have a larger gullet so there's more chip clearance. It is suitable for cutting softer materials such as aluminum and non-ferrous alloys. Therefore, a tool's strength is less of a concern. A tool can be fed faster, and larger material removal rate is facilitated by the large flute valleys of 2 flute tools. 2 flute end mills are recommended to be used at a slower speed when working with steel.
35 degree Helix: 2 Flute Square Endmill, 5/16" Diameter, 25/32" Cutting Length, 5/2" Overall Length, 5/16" Shank.

ACCUCUT I3KER 3/8” Carbide Roughing Square End Mill - 3 Flute Milling Bit for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50-35 Degree Helix, AlTiN Coating CNC Router Bit

Square Nose End Mills
ACCUCUT I3KER 3/8” Carbide Roughing Square End Mill - 3 Flute Milling Bit for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50-35 Degree Helix, AlTiN Coating CNC Router Bit Cover
Buy on Amazon Find on eBay
General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we select is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
Medium Pitch Design: allows the chips to be cut down to much finer sizes for smoother machining and a more efficient metal removal process, which allows more chips into the flutes during the evacuation process without any packing occurring. This results in lower cutting pressures at a given radial depth of cut.
3 Flute with 35 Helix: 35 degree helix has a higher tool strength. 3 flutes feature a large core that's great for roughing out a lot of meterials. If the finishing surface is a concern, then be sure to come in with a finishing tool after the roughing operation. It is recommended to use 4 flute, 45 degree helix end mills for finishing.

ACCUCUT A4KES 10mm Carbide Square End Mill- 4 Flute Milling Bit for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50 - AlTiN Coating CNC Router Bit, 45 Degree Helix

Square Nose End Mills
ACCUCUT A4KES 10mm Carbide Square End Mill- 4 Flute Milling Bit for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50 - AlTiN Coating CNC Router Bit, 45 Degree Helix Cover
Buy on Amazon Find on eBay

A ACT ACCU-CUT FAQs

Yes, A ACT ACCU-CUT is a legitmate brand on Amazon. After conducting a comprehensive analysis of 22 customer reviews for A ACT ACCU-CUT products on Amazon, we have determined its average rating. With a strong performance and good quality, A ACT ACCU-CUT has received an average rating of 4.72 from numerous buyers, indicating that A ACT ACCU-CUT are trustworthy and live up to their claims. Therefore, it is safe to make purchases from A ACT ACCU-CUT on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in A ACT ACCU-CUT and want to find more A ACT ACCU-CUT products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type A ACT ACCU-CUT in the search box and hit Enter to see the search results.
  3. Find and click the correct A ACT ACCU-CUT to go to the new page.
  4. Select the products you want in the A ACT ACCU-CUT buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more A ACT ACCU-CUT products.

We analyze millions of A ACT ACCU-CUT products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. A ACT ACCU-CUT has a relatively small number of products for sale, only 6, but we analyze all of them in detail and recommended them to our readers.

  1. Go to the A ACT ACCU-CUT page.
  2. Select the product you want in the A ACT ACCU-CUT buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product ACCUCUT I4KEL 1/2” Carbide Square End Mill- 4 Flut..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the A ACT ACCU-CUT products are produced by ACCUCUT. The manufacturer provides A ACT ACCU-CUT with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the A ACT ACCU-CUT products, helping you make more informed buying decisions. We recommend best choices of the products from the A ACT ACCU-CUT brand, helping you make better shopping choices with less time and energy.

Similar Brands

Super Tool thumbnail
Super Tool
SpeTool thumbnail
SpeTool
Niagara Cutter thumbnail
Niagara Cutter
SPEED TIGER thumbnail
SPEED TIGER
KinRite thumbnail
KinRite
FOMASP thumbnail
FOMASP
RHFGYY thumbnail
RHFGYY
Republic USA thumbnail
Republic USA
Vermont Gage thumbnail
Vermont Gage
Sisona thumbnail
Sisona
Hunricho thumbnail
Hunricho
Meda - Superior Import thumbnail
Meda - Superior Import