LAHDYFHOE

5.0

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, LAHDYFHOE has 306 products for sale. LAHDYFHOE products range in price from $8.9 to $95, and the average price of all the products is about $28.88.

We found that most of the LAHDYFHOE products are manufactured by GBJ. The manufacturer provides LAHDYFHOE with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase LAHDYFHOE products from the seller Carbide -T. The brand holds an average rating of 5, testifying to its excellent reputation.

LAHDYFHOE Best Sellers

Last Updated: Jan 11, 2025

LAHDYFHOE 1/2inch Shank Chamfering Tool Bit Turning Tool Holder Boring Bar with 10pcs TCMT32.51 Replacement Carbide Turning Inserts for Steel

Turning Holders

Buy on Amazon Find on eBay

[45 DEGREES CHAMFER BITS] : 1/2inch round shank lathe tool holder ,made from 40CrMo alloy materials, with Nickel Plating , has excellent anticorrosion proper-tym, against rust;

[TCMT32.51 INSERTS] : 60 degrees cutting edge angle, 0.63inch blade length , 0.157inch thickness, CVD coating, Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up;

[ADVANTAGE] : The design of the cutter body provides the ability of anti-vibration during cutting,high hardness and ultrafine particle matrix composition effectively improve the wear resistance of the inserts.

[SUITABLE FOR] : finishing and semi-finishing of various steel, stainless iron and cast iron workpieces, such as 45# steel, Spring steel, H13 steel ,42Cr steel,etc...

[PACKAGE INCLUDES] : 1x 1/2inch Shank Chamfering Tool holder +10pcs TCMT32.51 Carbide Inserts +1x T15 wrench

Read more Read less

LAHDYFHOE 1/2" SNL0013M16 Internal Threading Boring Bar 5/8" SER1616H16 Lathe Threading Holder with 10pcs 16ER AG60 Carbide Inserts External Carbide Threading Inserts

Threading Inserts

Buy on Amazon Find on eBay

Holder specification :SER1616H16 5/8" shank(16*16mm,16mm ≈ 0.629inch), Overall length : 100mm ≈3.937nch, Cutting direction: right hand,1/2" SNL0013M16 Internal left hand holder, 5.9"/150mm long , 0.51"/ 13mm high, Screw size : M3.5 x 10, T15 wrench

About this threaded insert:16ER AG60 threading turning insert material is carbide, AG60 60° universal pitch thread insert, machining pitch range: 0.5~3.0mm.Machinable materials: steel parts, stainless steel....

Blades exquisite workmanship, high strength, high toughness, stable and durable.Black oxided smooth finish on each turning tool holder style and shank size.

Inserts Feature: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting.

Package Includes: 1pc SER1616H16 Lathe Threading Holder +1pc SNL0013M16 Boring bar + 10pcs 16ER AG60 Carbide inserts +2pcs Wrench T15

Read more Read less

LAHDYFHOE 5/8" Indexable Metal Lathe Turning Tool Holder SRAPR1616H10 with 10pcs RCMT10T3MOE-JS R5 Round Carbide Replacement Inserts Button Inserts for Steel Stainless Steel

Turning Holders

Buy on Amazon Find on eBay

5/8in shank , 3.94in Overallength Turning Tool Holder is Black Oxidized Smooth Surface and Tool Hardness (HRC 50 degrees up and down) and Precision Are Up To The First Grade;

RPMT10TMOE R5 Carbide inserts: 0.4" External diameter and 0.15" thickness, nano blue coating ,quenched and high hardness Nano blue coating, more wear-resistant and prolonging the service life of the cutter;

This Indexable Metal lathe tools has good chip breaking and chip removal effect. Suitable for rough machining and finishing machining;

Advantage: The cutting edge is sharp and the cutting resistance is small. Unique design, less burrs produced when cutting. It is not easy to produce built-up tumors and improve the smoothness of the incision.

Pacakge includes: 1pc 5/8 Round Carbide Turning tool holder SRAPR1616H10 + 10pcs Nano blue Round carbide inserts RPMT10T3MOE-JS

Read more Read less

LAHDYFHOE 5/8“ Shank Grooving Slotting Tool ZQ1616R-2 Cut Off Lathe Turning Tool Holder with 10pcs SP200 Carbide Turning Inserts Grooving Parting Inserts (5/8 shank tool holder with SP200 inserts)

Lathe Turning Tools

Buy on Amazon Find on eBay

Inserts' model name: SP200，Cutting width:2mm/0.078in，Carbide inserts with CVD Coating. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance；

The carbide inserts with TIN coating,good wear-resistance, sharp and non-stick blade;

5/8 Shank ZQ1616R-2/3 Indexable Lathe Grooving Parting Holder：40CrMo Grooving Slotting Tool Cut Off Tool holders, 5/8in shank dia ,and 3.94in length, Screw compression type, quick and easy installation and removal.Quenching and hardening, stable processing and good shock resistance;

Insert Applicaiton: suitable for processing steel, cast iron and stainless steel parts

Package includes: 10pcs SP200 inserts + 1pc ZQ1616R-2Holder

Read more Read less

LAHDYFHOE 1pc 1/2In Shank MGEHR1010-2 High Quality Lathe Grooving Cut-Off Parting Tool Holder with 10pcs MGMN200 Indexable Grooving Inserts for Steel, Stainless Steel (MGEHR1010-2+ MGMN200)

Grooving Part Off Holders

Buy on Amazon Find on eBay

[Grooving Tool Holder] The MGEHR1010-2 is made of spring steel, which is of high quality, high hardness, high toughness, high precision, strong shock resistance, high temperature quenching, strong and durable.

[Grooving Cut-Off Inserts] :MGMN200-G Hartmetall-Dreheinsatz Größe: Dicke: 1,6 mm ≈ 0,2 cm, Länge: 16 mm ≈ 1,6 cm, Höhe: 3,5 mm ≈ 0,3 cm, P = 7 Grad.

[Advantages] : stable performance, not easy to chip, wide versatility, good toughness, impact resistance, the insert coating is sprayed with 1000 degree high stress deposition process, strong wear resistance

[Mainly used for grooving and cut off] : Suitable for wide and deep groove machining.The Grooving Cut-Off Tool Holder insert can be used for cutting stainless steel, Steel Parts.Offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.Perform good even in very dirty environment

[Package] : You will receive 1pc 12mm shank diameter MGEHR1010-2 carbide lathe turning tool holder , 11pcs MGMN200 grooving carbide turning inserts.

Read more Read less

LAHDYFHOE 1/2inch Right Hand HSMT12-12F11 Thread milling Cutter Internal Threading Boring Bar with 10pcs 11IR AG60 Carbide Threading Inserts and 10pcs M2.5 * 6 Screws for Stainless Steel,Steel Parts

Threading Inserts

Buy on Amazon Find on eBay

11IR A60 -- processing pitch range: 0.5mm - 1.5mm, partital profile:60°,Thckness:0.126in, Blade length: 0.43in,inscribed circle:1/4in, Adpt to M2.5*6 Screws; Material : Carbide inserts with CVD Coating. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance.

Inserts Feature: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting.Gold blades are suitable for processing steel parts, black blades are suitable for processing steel parts, stainless steel

HSMT12-12F11 -- Total length: 80mm, blade diameter: 11.8mm, handle diameter: 12mm/1/2 inch;mini lathe tools Internal threading tool lathe internal grooving bar，Suitable for varieties of processing condition, even in very dirty environment such as cast iron, they also have very good performance.

High temperature quenching: The handle uses quenching and hardening technology, which is highly hard and not easily deformed; Can be used for powerful cutting, effectively saving time,Using 42CrMo steel with superior seismic performance, it can effectively suppress vibration

Package Includes: 1pc HSMT12-12F11 Lathe Threading Holder + 10pcs 11IR AG60 Carbide inserts+10pcs M2.5*6 Screws

Read more Read less

LAHDYFHOE 3pcs 4 Flutes Shank1/2'' Carbide Square Nose End Mill, Carbide Square End Mills Flat End Mills 4-Edge CNC Milling Bits Cutter Iron-HRC55 - TISIN Coated (3pcs Square Nose 1/2” End Mills)

Square Nose End Mills

Buy on Amazon Find on eBay

Carbide End Mill :Cutting Diameter: 1/2 inch，Shank Diameter:1/2 inch，Cutting Length:1 inch，Overall Length:3 inch

High Quality:made from solid tungsten carbide (TC),have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear.

Carbide & AlTiN Coated：Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings;

Feature: Precision ground using the highest quality grinding wheels. High strength and hardness, abrasion resistant, practical, easy to use and durable in use.

Package: 3Pc 1/2" Square Carbide End Mill

LAHDYFHOE Grooving Cut-Off Tool Holder MGEHR1616-2 with 10pcs MGMN200 Tin Coated Indexable Carbide Grooving Inserts，2mm Width Carbide Blade for Steel (MGMN200 with 5/8 Tool Holder)

Internal Grooving Inserts

Buy on Amazon Find on eBay

Material : Inserts adopt high quality carbide substrate and Balzas coating. Holders adopt high quality imported 40Cr steel. Durable for long time using.

The Grooing Tool Holder is Black Oxidized Smooth Surface and Tool Hardness (HRC 50 degrees up and down) and Precision Are Up To The First Grade.

Feature.:The turning tool blade is convenient for users to grasp and replace, and only a wrench can complete the replacement of the blade and the blade pad

Package : 1 pcs MGEHR1616-2 lathe holder tool + 10 pcs MGMN200-G carbide inserts

Read more Read less

LAHDYFHOE 90 Degrees BAP 300R Square Shoulder Indexable End Mill Face Milling Arbor End Milling Shell Cutter APMT1135 Miilling Insert(300R+APMT1135)

Face Mill Holders

Buy on Amazon Find on eBay

Face Mill Arbor--model size: 1/2" * 1/2 * 5.11”, Made from alloy steel hardened to HRC 52-56,

Milling inserts--model size:APMT1135PDE,Balzers coating, Carbide substrate, Suitable for finishing and semi-finishing of various steel, stainless iron and cast iron workpieces, such as 45# steel, Spring steel, H13 steel ,42Cr steel.

Application: For processing steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC15 °- HRC45 °，installed on 300R Series End milling holder

Advantages : The carbide matrix combination with the AlTiN coating of composite multilayer structure greatly prolongs service life of cutting tool , has super strong film-base bonding force and extremely low friction coefficient .

Package includes:1pc 1/2" milling tool holder + 10pcs APMT1135 inserts

Read more Read less

GBJ 50pcs APMT1604 PDER APMT160408PDER Milling Inserts Turning Inserts Cutting Tools for BAP400R Milling Inserts Tool Holders Processing Hard Steel Parts

Milling Inserts

Buy on Amazon Find on eBay

Model: Dual-edge APMT1604 PDER , Coating: CVD, Material:Carbide,I.C(d): 0.366", Thickness(s): 0.187",Hole(d1): 0.173",Nose radius(r): 1/32",Nose Angle: 85°,Relief Angle: 11°,Good for both finishing and roughing;

Application: For processing steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC15 °- HRC45 °，installed on 400R Series End milling holder,Used for indexable face mill and end mill,Performing square milling and side milling;

Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance.

Feature: Suitable for finishing and semi-finishing of various steel, stainless iron and cast iron workpieces, such as 45# steel, Spring steel, H13 steel ,42Cr steel.

Read more Read less

LAHDYFHOE 5/8" MGIVR Lathe Grooving Cut-Off Parting Tool Holder with MGMN200 Carbide Grooving Inserts for Stainless Steel Steel Quenched Steel (5/8 Grooving Holder+MGMN200)

Internal Grooving Inserts

Buy on Amazon Find on eBay

Right hand Internal grooving tool holders--size name:MGIVR2016 ,adapt to MGMN inserts, overallength of the holders:180mm=7.08in, shank diameter:16mm=5/8in, made from 42CrMo ,high strength, high stiffness, good cushioning performance;

Grooving insets--MGMN200 grooving width:2mm=0.078in,The carbide inserts with TIN coating,good wear-resistance, sharp and non-stick blade;

Mainly used for grooving and cut off, suitable for processing steel and 45#steel , cast iron ,stainless steel ,Hardened Steel,etc...

Features: Offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.Perform good even in very dirty environment

Package includes: 1pc 5/8 shank MGIVR2016-2 grooving tool holders + 10pcs MGMN200 grooving inserts

Read more Read less

LAHDYFHOE 5pcs 5/16inch Shank Turning Tooling Bit Holder Set with TCMT090204 Inserts Turning Inserts Indexable Carbide Insert for Steel, Stainless Iron and cast Iron (TCMT090204+5/16" Holder)

Turning Inserts

Buy on Amazon Find on eBay

TCMT090204:Suitable for finishing and semi-finishing of various steel, stainless iron and cast iron workpieces, such as 45# steel, Spring steel, H13 steel ,42Cr steel. Inserts can be rotated to a new cuting edge without changing the posilion ofthe tool holder (each has thre sides).

Coating: CVD ,Coating endows inserts strong impact resistance, good versatility with high precision, High finish and High wear resistance, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting

5/16'' Shank Turning Tool holders:made from 40CrMo, Widely Use, Tightly impacted bolt, simple structure, Anti-rust oil wiped on holders to prevent from oxidation;

Advantage:Featuring a positive rake cutting angle and an integrated chip breaker groove, suitable for turning, cutting, facing, boring, and chamfering applications

Package includes: Mini Turning Tool holders with 5/16'' Shank, featuring 5 tool holders - AL, AR, BL, BR, and E - along with 5pcs TCMT090204 Inserts

Read more Read less

LAHDYFHOE 2 PCS VNMG160404/08 CBN-4/ WNMG080404/08 CBN-6Gold Superhard Boron Nitride HRC65 Hardened Steel Blade (VNMG160408 CBN-4)

Turning Inserts

Buy on Amazon Find on eBay

Model: VNMG160404/08 CBN-4/ WNMG080404/08 CBN-6

Material: super hard boron nitride

Processing material: hardened steel

Processing material hardness: HRC45-HRC65

Package contents: 2 piece VNMG100404/08 CBN-4/ WNMG080404/08 CBN-6Gold

LAHDYFHOE 5/8“ Shank Grooving Slotting Tool ZQ1616R-3 Cut Off Lathe Turning Tool Holder with 10pcs SP300 Carbide Turning Inserts Grooving Parting Inserts (5/8 Shank Tool Holder with SP300 Inserts)

Lathe Turning Tools

Buy on Amazon Find on eBay

Inserts' model name: SP300，Cutting width:3mm/0.118in，Carbide inserts with CVD Coating. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance；

The carbide inserts with TIN coating,good wear-resistance, sharp and non-stick blade;

Insert Applicaiton: suitable for processing steel, cast iron and stainless steel parts

Package includes: 10pcs SP300 inserts + 1pc ZQ1616R-3 Holder

Read more Read less

LAHDYFHOE 3/4inch Lathe Grooving Tool Holder Grooving Cut-Off Tool Holder MGEHR2020-1.5 with 10pcs MGMN150-G Indexable Carbide Grooving Inserts (1pc MGEHR2020-1.5+10pcs MGMN150-G)

Turning Holders

Buy on Amazon Find on eBay

MGMN150-G carbide turning insert size : thickness: 1.2mm ≈ 0.047", length : 16mm ≈ 0.629" , height : 3.5mm ≈ 0.137" , P=7 degree.Coating endows inserts strong impact resistance, good versatility with high precision, High finish and High wear resistance.

Application : Suitable for wide and deep groove machining.The Grooving Cut-Off Tool Holder insert can be used for cutting stainless steel, iron pipe, copper pipe, aluminum pipe, non-metallic pipe, plate and other materials.High grip, impact resistance, clear speed advantage, has a greater advantage in cutting and processing.

Maintain tight tolerances for unmatched performance; the grooving tool holder and carbide grooving inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!

Material : The MGEHR2020-1.5 lathe turning tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance.The user only needs to use a wrench to complete the replacement of the blade and pad by clamping and convenient replacement

Package : You will receive 1pc 16mm shank diameter MGEHR2020-1.5 carbide lathe turning tool holder , 10pcs MGMN150-G grooving carbide turning inserts.

Read more Read less

10PCS RCMT10T3MO Turning Inserts R5 Carbide Milling Inserts RCMT Insert CVD Coated Lathe Indexable inserts for SRACR/L Turning toolholder Processing Stainless Iron, Steel

Turning Inserts

Buy on Amazon Find on eBay

Size: RCMT10T3MO (R5) Carbide inserts

Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Used for turning and finishing on a wide range of materials

Designed for Steel, cast iron and non-ferrous materials

Holder Applicated: SRACR/ SRACL,SRGCR/SRGCL, SRDCN

LAHDYFHOE+ 3/4inch Shank 1Blade 2Blade Chamfering Tool Bit Turning Tool Holder Boring Bar with 10pcs TCMT32.51 TCMT32.52 Replacement Carbide Turning Inserts (TCMT16T304 TCMT32.51)

Turning Inserts

Buy on Amazon Find on eBay

[TCMT INSERTS] : 0.63inch blade length , 0.157inch thickness, CVD coating, Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up;

[45 DEGREES CHAMFER BITS] : 3/4” round shank lathe tool holder ,made from 40CrMo alloy materials, with Nickel Plating , has excellent anticorrosion proper-tym, against rust;

[SUITABLE FOR] : finishing and semi-finishing of various steel, stainless iron and cast iron workpieces, such as 45# steel, Spring steel, H13 steel ,42Cr steel,etc...

[PACKAGE INCLUDES] : 1x 3/4inch Shank Chamfering Tool holder +10pcs TCMT Carbide Inserts +1x T15 wrench

Read more Read less

LAHDYFHOE 10pcs CNMG 431 -MA CNMG120404 -MA Gold Carbide Turning Inserts Lathe Carbide Inserts Cutting Tools for Machining Steel Parts/Stainless Steel (CNMG431-MA US)

Turning Inserts

Buy on Amazon Find on eBay

Material: Carbide turning inserts. Holder applied: MCLNR /MWLNR /MTJNR/L

Coating: PVD , Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance.

Feature: Suitable for finishing and semi-finishing of various steel, stainless iron and cast iron workpieces, such as 45# steel, Spring steel, H13 steel ,42Cr steel. Perform good even in very dirty environment

Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces.

Package includes:10pcs CNMG120404-MA/CNMG431-MA gold Carbide inserts (Boxed)

LAHDYFHOE WNMU080608 Fast Feed Square Milling Grain Inserts for MFWN Milling Cutter (WNMU08 for cast iron (Gray))

Milling Inserts

Buy on Amazon Find on eBay

WNMU080608EN-GM milling inserst are used for machining steel parts and iron ,for shoulder milling, face milling and slotting

Feature: WNMU080608EN-GM belongs to fast feed general-type milling inserts. Good toughness and hardness; improve the surface gloss of the cutting pieces

Advantage: High vibration-absorbing performance, improve the surface finish of the workpiece,Great for shoulder milling, face milling and slotting

The WNMU080608EN boost milling inserts are made from ultrafine cemented carbide matrix combined with Balzas coating, suitable for material processing within 60 degrees

Package includes: 10pcs WNMU080608EN -GM milling blades , used on MFWN milling cutter

LAHDYFHOE 3/8in Shank Tungsten Steel Indexable Boring Bar End Mill Tool Holder for Rough Machining and Milling Deep-Feed 90 Degrees Right Hand(3/8in x 0.43in x 3.94in-2T)

End Mill Holders

Buy on Amazon Find on eBay

[DIMENSIONS] Size name:EXN02R，Right hand 90° Cutting angle for Rough Milling,cutting dia= 3/8in ,shank dia= 3/8in , length=100mm/3.94in

[Metrial] HRC42-45,Made of 42CrMo ,through heated and quenched,made from 60SiMn spring steel ,excellent anti-vibration

[SUITABLE FOR] for LNMU0202 milling inserts, and M1.8 Screw, T6 wrench,high-load-machining method,suitable for rough machining, and improve processing efficiency;

[Fast and Efficient] High vibration-absorbing performance, improve the surface finish of the workpiece,Great for shoulder milling, face milling and slotting

[Package includes]: 1piece End Mill Tool Holder

LAHDYFHOE FAQs

Is LAHDYFHOE Legit?

Yes, LAHDYFHOE is a legitmate brand on Amazon. After conducting a comprehensive analysis of 2 customer reviews for LAHDYFHOE products on Amazon, we have determined its average rating. With a strong performance and good quality, LAHDYFHOE has received an average rating of 5 from numerous buyers, indicating that LAHDYFHOE are trustworthy and live up to their claims. Therefore, it is safe to make purchases from LAHDYFHOE on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more LAHDYFHOE products?

If you're interested in LAHDYFHOE and want to find more LAHDYFHOE products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type LAHDYFHOE in the search box and hit Enter to see the search results.
Find and click the correct LAHDYFHOE to go to the new page.
Select the products you want in the LAHDYFHOE buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more LAHDYFHOE products.

How does findthisbest choose the top LAHDYFHOE products?

We analyze millions of LAHDYFHOE products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase LAHDYFHOE products via FindThisBest?

Go to the LAHDYFHOE page.
Select the product you want in the LAHDYFHOE buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product LAHDYFHOE 1/2inch Shank Chamfering Tool Bit Turnin..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the LAHDYFHOE products?

Most of the LAHDYFHOE products are produced by GBJ. The manufacturer provides LAHDYFHOE with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the LAHDYFHOE products, helping you make more informed buying decisions. We recommend best choices of the products from the LAHDYFHOE brand, helping you make better shopping choices with less time and energy.

Similar Brands

Peachtree Woodworking Supply