TMAX feature image

TMAX

Review rating Review rating Review rating Review rating Review rating 4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, TMAX has 122 products for sale. TMAX products range in price from $6.83 to $149.99, and the average price of all the products is about $46.35.

We found that most of the TMAX products are manufactured by Golden Coulee and Applied Digital. The manufacturers provide TMAX with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase TMAX products from the seller Golden Coulee, LLC. The brand holds an average rating of 4.79, testifying to its excellent reputation.

TMAX Best Sellers

Last Updated: Jan 11, 2025

TMAX 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools

100 PC 1/2" (12.7mm) sand drum with 2 Mandrel for dremel grit 60 coarse
100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter; 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels; 1/8" (3.175mm) shank size (for Dremel and other Rotary Tools)
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 25 pc #2 Square Robertson 2 Inch Screwdriver Insert Bits, Durable S2 Steel, with Heavy Duty Storage Container

INCLUDED: 25 pc #2 Square Robertson Screwdriver Insert Bits in a plastic storage case.
SIZE: All bits are 2" (50.8mm) long with a 1/4" (6.35mm) hex shank and quick release slot.
TAIWAN S2 STEEL: Made with Taiwan S2 Steel, which lasts 3x longer than regular S2 steel and 10x longer than CR-V steel based on our fatigue testing. Sample test results are shown below.
IMPACT READY: Bits are impact ready; suitable for both hand tools and electric tools.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 100 Piece Color Coded Impact Ready Security Bits Screwdriver Set Kit with 2 Quick Chucks

Includes 98 pieces of a popular range of bits for professional users. All bits are forged with S2 steel for maximum durability. Bits are color-coded for easy identification and organization. Comes with a heavy duty PVC storage kit.
Includes one quick release chuck: the chuck hold bit very tight. No more wiggling as commonly happens on magnetic bit holder. Bits release by pull back the blue release ring. The package also include one magnetic bit holder.
Phillips: #00, #0, #1, #1, #2, #2, #3, #4 & Slotted: 3/4/4.5/5/5.5/6/6.5/7/8mm & Pozi: #1, #2, #2, #3, #4 & Hex:1.5/2/2.5/3/4/5/5.5/6/7/8mm, 1/16" (1.59mm), 5/64" (1.98mm), 3/32" (2.38mm), 7/64" (2.78mm), 1/8" (3.175mm), 9/64" (3.57mm), 5/32" (3.97mm), 3/16" (4.76mm), 7/32" (5.56mm), 1/4" (6.35mm)
Tri Wing: #1, #2, #3, #4 & Spanner: #4, #6, #8, #10, #12 & Torq-Set: #6, #8, #10 & Square: #0, #1, #2, #3 & Clutch: 1/8" (3mm), 5/32" (3.97mm), 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (8mm) & Spline: M5, M6, M8 & Torx: T8, T9, T10, T15, T20, T25, T27, T30, T40, T45 Hex Tamper: 2/2.5/3/4/5/6mm, 5/64" (1.98mm), 3/32" (2.38mm), 7/64" (2.78mm), 1/8" (3.175mm), 9/64" (3.57mm), 5/32" (3.97mm) & Torx Tamper: T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 100 Piece Impact Ready Security Bits Screwdriver Set Kit with 2 Quick Chucks

Includes 98 pc popular range of bits for professional users. All bits are forged with S2 steel for maximum durability. Comes with a heavy duty PVC storage kit.
Include one quick release chuck: the chuck hold bit very tight. No more wiggling as commonly happens on magnetic bit holder. Bits release by pull back the blue release ring. The package also include one magnetic bit holder.
Phillips: #00, #0, #1, #1, #2, #2, #3, #4 & Slotted: 3/4/4.5/5/5.5/6/6.5/7/8mm & Pozi: #1, #2, #2, #3, #4 & Hex:1.5/2/2.5/3/4/5/5.5/6/7/8mm, 1/16" (1.59mm), 5/64" (1.98mm), 3/32" (2.38mm), 7/64" (2.78mm), 1/8" (3.175mm), 9/64" (3.57mm), 5/32" (3.97mm), 3/16" (4.76mm), 7/32" (5.56mm), 1/4" (6.35mm)
Tri Wing: #1, #2, #3, #4 & Spanner: #4, #6, #8, #10, #12 & Torq-Set: #6, #8, #10 & Square: #0, #1, #2, #3 & Clutch: 1/8" (3mm), 5/32" (3.97mm), 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (8mm) & Spline: M5, M6, M8 & Torx: T8, T9, T10, T15, T20, T25, T27, T30, T40, T45 Hex Tamper: 2/2.5/3/4/5/6mm, 5/64" (1.98mm), 3/32" (2.38mm), 7/64" (2.78mm), 1/8" (3.175mm), 9/64" (3.57mm), 5/32" (3.97mm) & Torx Tamper: T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX Quick Change Collet Nut Kit Set #4485 Durable for Dremel Rotary Tools

TMAX Quick Change Collet Nut Kit Set 4485 Durable for Dremel
for Dremel except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models 260, 270 and 280. It also fit many other compatible rotary tools.
Collets are 3/4" (19.05mm) long and for Dremel 225 and compatible Flex-Shaft attachment.
include a collet nut and 4 piece durable shiny 1/32” 1/16” 3/32” 1/8” inch Collet bit #483 482 481 480
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 10 Pieces T15 Torx Star Head Screwdriver Bit Set, S2 Steel 15 Point T-15 Reduced Round Shaft Screwdriver Insert Bits Hex Shank

TMAX 10 Piece T15 Torx Star 6 Point Reduced Round Shaft Screwdriver Insert Bits Hex Shank
Made of S2 steel for maximum durability.
Bits are impact ready. Suitable for both hand tool and electric tool
Bits come in plastic bag These bits have a thin, round shaft for working in tight spaces
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX Rotary Tool Hold Hanger Stand Clamp for Dremel Foredom and Other Rotary Tools

Super-handy rotary tool accessory - keeps tool handy, out of the way; essential for flex shaft use
3-section steel rod allows customized tool height, adjusts easily from 10 - 22 inches. Heavy-duty table-bench clamp can be used horizontal or vertical; 2-1/2 inch clamping capacity
Hanger swivels 360-degrees for superior versatility and easy access. Steel rod and hanger with mirror Chrome finish; rugged non-conductive, non-scratch ABS base.
The item on sale is the Rotary Tool Holder only. Please see other listings for rotary tool, accessories and Flexible Shaft.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 50 pc 1/4 Inch Flat Impact Ready 1 Inch Length Slotted Screwdriver Insert Bit Hex Shank with Quick Release Slot

INCLUDED: 50 pc Flat Slotted 1/4" (6.35mm) Screwdriver Insert Bits in a plastic storage case.
SIZE: All bits are 1" (25.4mm) long with a 1/4" (6.35mm) hex shank and quick release slot.
TAIWAN S2 STEEL: Made with Taiwan S2 Steel, which lasts 3x longer than regular S2 steel and 10x longer than CR-V steel based on our fatigue testing. Sample test results are shown below.
IMPACT READY: Bits are impact ready; suitable for both hand tools and electric tools.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 42 Inch (1 Meter) Flexible Flex Shaft Polishing Chuck for Dremel Rotary Grinder Tools

42" Rotary Grinder Tool Flexible Flex Shaft for Dremel and compatible rotary tools
This is a 42” grinder attachment which fits the majority of rotary tools. connection is for head with 3/4" (19.05mm) thread. for Dremel models 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, ToolShop, Performax, Milwaukee M12, etc. If you're a DIY-er, hobbyist or craft worker turn your rotary tool into a grinder with this flexible shaft attachment.
Rotary tools are incredibly versatile and this accessory gives you even more functions. Plus, the flexi rubber non-slip shaft lets you take really control over the job in hand. Bit installation instruction: 1) insert the L bar included into the hole at the collet side of the shaft. 2) unscrew the shaft collet nut. 3)insert bit, not included, into the shaft collet 4)tighten shaft collet nut. 5) remove the L bar
Shaft installation as shown in attached picture: 1) remove rotary tool collet nut, and rotary tool top cap. 2) slide collet nut onto shaft core. 3)insert shaft core into collet. 4) tighten collet nut. Make sure the shaft core is hold tightly in the tool. 5) screw shaft connector onto the rotary tool. This will ensure the shaft core push back into the shaft.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 10 pc Durable Shiny 1/32 Inch Rotary Tool Collet Bit #483 for Dremel Rotary Tools

10 piece set of durable, shiny Collet bits #483 for 1/32”(0.79mm) diameter bits.
Collets are all 3/4" (19.05mm) long.
Will for Dremel except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models 260, 270 and 280. It also fits many other compatible rotary tools.
Collets are for Dremel 225 and compatible Flex-Shaft attachment. Durable and long-lasting for extended use.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 532 Wheel Lock Nut Screw Removal Key Anti-Theft Lugnut Socket S3056 for Vw Audi Vag Volkswagen Vehicles

TEMO 532 Wheel AntiTheft Screw Nut for VW AUDI VAG Volkswagen
They are used to remove or lock wheel anti-theft screws for VAG vehicles including UP, Polo 2010>, Beetle 2012>, Golf 2009>, Jetta 2011>/, EOS, Scirocco, Passat 2006>, Sharan, Touran, Tiguan.
To determine which key you need, visually match the key pattern to the locking lug nuts on your vehicle. Key compatibility is not based on the make, model or year of the vehicle. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time, this helps reduce pressure on the remaining nuts.
Individual pieces now available from our 20 pc set! Not intended for use with impact wrench. Interior black surface is made with Manganese Phosphate Coating.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 20-30 AWG Professional Wire Stripper/wire crimping tool, Wire Cutter, Wire Crimper, Cable Stripper, Wiring Tools and Multi-Function Hand Tool

20-30 AWG Professional Wire Stripper
This wire stripper can cut copper wires, fine iron wires and more, making it ideal for various electronic engineering and repair tasks.
Using a wire stripper can reduce the risk of accidental injury, as it can quickly and accurately remove wire insulation without using manual tools that could cut your fingers. Additionally, there is a safety lock on this wire stripper.
Rubber dipped handles allow for a firm grip, no slipping, and less hand fatigue.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 32/16Pt Wheel Lock Nut Screw Removal Key Anti-Theft Lugnut Socket S3054 for Bmw Vehicles

TMAX 32/16Pt Wheel Lock Nut Screw Removal Key Anti-Theft Lugnut Socket S3054 for Bmw Vehicles
Used to remove or lock wheel on car/truck/SUV
To determine which key you need, visually match the key pattern to the locking lug nuts on your vehicle. Key compatibility is not based on the make, model or year of the vehicle. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time, this helps reduce pressure on the remaining nuts.
Individual pieces now available from our 21pc set! Not intended for use with impact wrench
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

TMAX 25 pc Tri Wing #2 Screwdriver Insert Bits Triangular Slotted Y shape 2 Inch (50 mm)

INCLUDED: 25 pc Tri Wing #2 Screwdriver Insert Bits in a plastic storage case.
SIZE: All bits are 2" (50.8mm) long with a 1/4" (6.35mm) hex shank and quick release slot.
TAIWAN S2 STEEL: Made with Taiwan S2 Steel, which lasts 3x longer than regular S2 steel and 10x longer than CR-V steel based on our fatigue testing. Sample test results are shown below.
IMPACT READY: Bits are impact ready; suitable for both hand tools and electric tools.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.

T-Max 3W/G2 - The Industry Standard in-Room Digital Tanning Bed Timer - 20 Minute Max Time

Cover Plate Size: 5.25"H x 5.25"W ~ PCB: 2.5"H x 3.75"H x 1.5"D
Power: 9-12V (DC or AC), 200ma
2 digit LED display.
Wired I/O: 2 RJ-22 Connections
Wireless I/O: 1 RJ-11 Connection for connecting to the G2 Access Point
Fits in standard double-wide plastic light switch box.

T-Max 3W/G2 - The Industry Standard in-Room Digital Tanning Bed Timer - 60 Minute Max Time

Cover Plate Size: 5.25"H x 5.25"W ~ PCB: 2.5"H x 3.75"H x 1.5"D
Power: 9-12V (DC or AC), 200ma
2 digit LED display.
Wired I/O: 2 RJ-22 Connections
Wireless I/O: 1 RJ-11 Connection for connecting to the G2 Access Point
Fits in standard double-wide plastic light switch box.

T-Max 3W/G2 - The Industry Standard in-Room Digital Tanning Bed Timer - 15 Minute Max Time

Cover Plate Size: 5.25"H x 5.25"W ~ PCB: 2.5"H x 3.75"H x 1.5"D
Power: 9-12V (DC or AC), 200ma
2 digit LED display.
Wired I/O: 2 RJ-22 Connections
Wireless I/O: 1 RJ-11 Connection for connecting to the G2 Access Point
Fits in standard double-wide plastic light switch box.

T-Max 3W/G2 - The Industry Standard in-Room Digital Tanning Bed Timer - 30 Minute Max Time

Cover Plate Size: 5.25"H x 5.25"W ~ PCB: 2.5"H x 3.75"H x 1.5"D
Power: 9-12V (DC or AC), 200ma
2 digit LED display.
Wired I/O: 2 RJ-22 Connections
Wireless I/O: 1 RJ-11 Connection for connecting to the G2 Access Point
Fits in standard double-wide plastic light switch box.

TMAX FAQs

Yes, TMAX is a legitmate brand on Amazon. After conducting a comprehensive analysis of 320 customer reviews for TMAX products on Amazon, we have determined its average rating. With a strong performance and good quality, TMAX has received an average rating of 4.79 from numerous buyers, indicating that TMAX are trustworthy and live up to their claims. Therefore, it is safe to make purchases from TMAX on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in TMAX and want to find more TMAX products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type TMAX in the search box and hit Enter to see the search results.
  3. Find and click the correct TMAX to go to the new page.
  4. Select the products you want in the TMAX buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more TMAX products.

We analyze millions of TMAX products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 122 TMAX products for sale, 18 of which were analyzed in detail and recommended to customers.

  1. Go to the TMAX page.
  2. Select the product you want in the TMAX buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product TMAX 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the TMAX products are produced by Golden Coulee and Applied Digital. The manufacturers provide TMAX with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the TMAX products, helping you make more informed buying decisions. We recommend best choices of the products from the TMAX brand, helping you make better shopping choices with less time and energy.