Skip to content

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, JMT has 306 products for sale. JMT products range in price from $9.98 to $187.98, and the average price of all the products is about $44.55.

We found that most of the JMT products are manufactured by ADT-Link and ADT-LINK. The manufacturers provide JMT with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase JMT products from the seller JMT Direct Store. The brand holds an average rating of 4.74, testifying to its excellent reputation.

Share

JMT Best Sellers

Last Updated: Jan 11, 2025

JMT Metal PCI Slot 2.5inch IDE/SATA/SSD/HDD Mounting Bracket Rear Panel Mount Bracket Hard Drive Adapter Tray Caddy with Sata Data Cable (Full Height Bracket)

  • The PCI slot has always been a slot that is rarely used, because the 2.5-inch hard disk installation space reserved for general chassis is limited, and some standard chassis do not even provide expansion space for 2.5-inch hard disks, so the expansion space and wiring are brought to users. many problems.
  • This PCI expansion rack solves many problems for users. It not only uses the PCI bit, but also frees up a large part of the space, bringing solutions to mass storage expansion and cabling, suitable for desktop, HIPC and other users to expand.
  • For users who are keen on computer DIY, the built-in hard disk space of the case is far from enough to meet the needs. In order to facilitate the case cable management and expansion storage, we designed this special SSD solid state hard disk rack, which is mainly used for the motherboard PCI It can expand 1-3 hard disks.

JMT ADT-UT3G USB4.0 Docking Station 64G PCIe4.0x4 to Laptop Graphics Card External Conversion Adapter Compatible with Thunderbolt 3 4

  • UT3G Interface: Compatible with TB3/TB4/USB4 interface, does Not support USB interface.(Upgraded verison, optimized and come with Cooling fan or heasink randomly)
  • UT3G Application: eGPU Compatible with NUC / ITX / STX / Notebook PC. Chip: ASM2464PD. Transfer Speed: Gen4 x2 , 40G/bps (Max.).
  • Power Instructions: Compatible with SFX, and ATX power supplies, Please prepare the power supply according to the power of the graphics card.

JMT 3 Ports Hidden Inside USB 3.0 to Expresscard 54mm USB3.0 Adapter Converter for Express Card Laptop Notebook PC

  • The card is suitable for the interface ExpressCard 54 mm. With this USB 3.0 ExpressCard you can provide two additional USB 3.0 ports for your notebook easily and comfortably.
  • Compatible with ExpressCard 54mm Plag and Play The card is suitable for the interface ExpressCard 54 mm.
  • With this USB 3.0 ExpressCard you can provide two additional USB 3.0 ports for your notebook easily and comfortably.

JMT NGFF NVME M2 M2PLUS 2230 to 2280 Adapter Card 2230, 2242, 2260, 2280 Extended Transfer Long Size Change for M.2 U.2 M3 M.3 SSD (10Pcs)

  • M.2 Extended Card can support 2230 to 2242/2260/2280, 2242 to 2280, 2260 to 2280. Does not support 2242 to 2260.
  • Stable lead-free SMT fixing screw column, easy to install and remove.
  • Made of high-quality metal material, durable, firm and stable for us to use.

JMT PCI-E 3.0 x16 1 to 4 Split Card Gen3 PCIe-Bifurcation x16 to x4x4x4x4 Expansion Card 20.2mm Spaced Slots SATA Power Supply Port

  • Supports the installation of 4 PCIE cards, Supporting graphics cards, network cards, solid state drives, passthrough cards, capture cards, computing cards, etc., and maximum work at X4 performance.
  • With SATA power supply port, add 4 solid capacitors. With 1 minute 4 clock split IC. with 4 power-on LED indicators.
  • Need your motherboard BIOS support to change the corresponding slot PCIE working mode for X4X4X4X4X4.

JMT HLK-LD2450 24GHz Trajectory Sensor Kit ISM Smart Home Human Movement Tracking Ra·DAR Induction Module Distance Angle Speed Measurement (1Piece)

  • LD2450 Ra·dar Module: A Trajectory Module, which can achieve real-time tracking of the position of the moving target in the detection area, and output the distance, angle and speed information of the moving target in the area through the serial port.
  • Using Scenes: It is mainly used in common indoor scenes, such as home, office and hotel, to realize the positioning and tracking of moving people.
  • Detection Angle : Azimuth ± 60° / Tilt ± 35°. Angle Accuracy : 2° ~ 20°.

JMT PCI-E 4.0 x16 1 to 2 Expansion Card Gen3 Split Card PCIe-Bifurcation x16 to x8x8 with 20mm Spaced Slots CPU4P Power Supply Port (SATA)

  • PCIE X16 full bandwidth 4. 0 , GEN*4 protocol, compatible with gen3 /gen4(Specific circumstances are required to fully operate in GEN4 state).
  • Conditions of use: Motherboard BlO*S supports changing PCIE operating mode to X8X8.
  • Gold finger sinking process, increase gold thickness to 5U.

JMT HLK-LD2450 24GHz Trajectory Sensor ISM Smart Home Human Movement Tracking Ra·DAR Induction Module Distance Angle Speed Measurement (5Pcs)

  • LD2450 Ra·dar Module: A Trajectory Module, which can achieve real-time tracking of the position of the moving target in the detection area, and output the distance, angle and speed information of the moving target in the area through the serial port.
  • Using Scenes: It is mainly used in common indoor scenes, such as home, office and hotel, to realize the positioning and tracking of moving people.
  • Detection Angle : Azimuth ± 60° / Tilt ± 35°. Angle Accuracy : 2° ~ 20°.

JMT 2242 to 2280 M.2 Modification Board Compatible with NVME Legion Go SSD Memory Card 4T 8T (2242 to 2280)

  • Compatible with NVMe adapter card 2242 to 2280 (interface compatible with 2230 2242 2260 2280.).
  • Compatible with legion go modification, you can install 2280 hard disk to get more capacity.
  • Installation: Disassemble the device, remove the original 2242 hard disk,?black adhesive backing directly affixed to the original ssd underneath.

JMT M.2 M Key NVMe External Graphics Card Stand Bracket 32Gbs Full Speed with PCIe 3.0 x4 Riser Cable for Graphics Card 1660 Above (50CM R43SG)

  • Model R43SG: Bandwidth Speed 32G/s, PCIe3.0x4( B07XYZ89J7 ).
  • Graphics Card Compatibility: M.2 NVMe interface, Only support for new graphics cards after 2015(Graphics Card after 1660 compatible and stable, old graphics cards shipped before 2014 are not supported).
  • Motherboard Compatibility: Compatible with Notebook, ITX/STX motherboards, NUC. Only Supports M.2 NVMe interface, Does not support M.2 SATA / M.2 WiFi / M.2 WWAN / USB interface.

JMT M.2 NVME M-Key B+M 2230 to 2242 SATA-Bus SSD Extension Adapter Card Compatible with ThinkPad X270 X280 T470 T480 L480 T580 Serials (2230 to 2242)

  • Item Name: M.2 NVME M-Key B+M 2230 to 2242 SATA-Bus SSD Extension Adapter Card.
  • Support 2230 to 2242 NVME? SSD extension, support also 2230 to 2242 SATA-Bus SSD extension.
  • It can't convert NVME to SATA, also can't convert SATA to NVME.

JMT M.2 M-Key to PCIE 4.0X4 External Graphics Card Stand Bracket Compatible with Oculink/M.2 NVMe Laptop eGPU?GDP Handhelds (Dock-OC4+ACB1)

  • Oculink-Compatible adapter board, support devices with O culink port to expand PCIE card.
  • Support M.2 port, through the standard O culink extension cable to PCIE card.
  • Support expanding GPU graphics card, PCIE network card, PCIE sound card,?PCIE capture card, etc. PCIE array card only supports X4 devices.

JMT M.2 NVMe M Key to Oculink 4i / SFF8611 Extension Cable PCIe4.0 X4 Gen3 4 Compatible with T10 / SAS-4 SFF-8612 (20cm)

  • M.2 NVMe M key to Ouclink 4i / SFF8611 silver-plated extension cable, support PCIE 4.0 X4 GEN4, GEN3.
  • Suitable for small hosts, desktops, laptops, etc. to convert M.2 sockets to Oculink sockets, with fixing holes for fixing.
  • Support PCIE 4.0 data transmission, support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Two-Way Lora Signal Booster, 433MHz /510MHz /868MHz JMT Power Signal Amplifier Module WiFi Range Extender Transmitting & Receiving for Lora Router Ethernet RC Drone (IOT-433MHz SMA)

  • * Applicable Frequency Band* -- AB-IOT-433/AB-IOT-510/AB-IOT-868 series two-way signal power amplifier modules are designed for various applications in the 433MHz (420MHz-480MHz) , 510MHz (470MHz-520MHz)and 868MHz (Europe 863MHz-870MHz) frequency bands. Its compact size and convenient use make it easier to design products for high-power and long-distance applications in this frequency band.
  • * Performance * -- Built-in intelligent receiving/sending discrimination circuit, does not require front-end equipment to provide receiving/sending switching control signals.The transmission gain is manually adjustable, which is convenient for compatible wireless devices with different transmission powers.
  • * Operating Mode * -- This wireless range extender module works in the receiving state by default and amplifies the received signal. When the front-end equipment is detected to transmit external signals, it will instantly switch to the transmitting and amplifying state.The transmission gain is manually adjustable, which is convenient for compatible wireless devices with different transmission powers.

JMT EXP GDC Notebook External PCI-E Discrete Graphics Beast Series External Laptop Docking Station Mini PCI-E/M.2 A Key No Power (M.2 A Key)

  • EXP GDC is the laptop's external equipment; It can help them to use the independent external high-performance graphics, can be used to use any of the pci-e interface equipment, to improve the performance of the laptop, so that they can play the huge game requirement high high-performance graphics.
  • The EXP GDC notebook external independent video card base has an Express card data cable and a 6-pin/8-pin power cable.
  • The enhanced MINI PCI-E data cable , uses a 26pin interface and supports Type 54 and Type 34 Express card interfaces.

JMT FAQs