AOICRIE

4.7

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, AOICRIE has 108 products for sale. AOICRIE products range in price from $4.99 to $29.99, and the average price of all the products is about $10.71. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase AOICRIE products from the seller Aoicrie. The brand holds an average rating of 4.73, testifying to its excellent reputation.

AOICRIE Best Sellers

Last Updated: Jan 9, 2026

Aoicrie Lipo Battery Voltage Checker and Alarm, 2 Pack - LED Detector for 1S-8S Lithium Batteries 1655

Electrical Battery Testers

Buy on Amazon Find on eBay

2 in 1 Tester - Voltage Checker & Low Voltage Alarm All In One,Battery monitoring alarm tester, low voltage alarm mode: 1S-8S, alarm set value range: OFF-2.5-3.8, voltage detection precision: +/-0.01V.Reads Individual Cell Voltage & Total Pack Voltage.

Easy to Use - capable with any 1-8S Lipo/ LiFe/ LiMn/ Li-ion batteries.Just insert the balance plug, automatically detect the voltage and total voltage of each battery cell, support reverse connection protection.

Suitable - Works on 1-8 Cell Lipo Batteries with JST-XH Balance Lead Compatible with 1-8s Lipo/Li-ion/LiMn/Li-fe RC battery, the pin space is about 3 mm (0.12 inch) straight pin.

Low Voltage Alarm - Extra Loud Alarm ,When the voltage is lower than the set value, the buzzer will ring and the red LED light will flash. The factory default is 3.3v. Press the button to change the voltage setting value and save it automatically.

LED Display Mode - Battery cell voltages, total voltages, lowest cell voltage, remaining battery capacity. Cycle display battery working status, protect battery from over-charging or over-discharging.

Read more Read less

CC1101 Wireless Module with SMA Antenna Wireless Transceiver Module 315/433/868/915MHZ

Networking Transceivers

Buy on Amazon Find on eBay

CC1101 wireless RF transceiver 315/433/868/915MHZ + SMA antenna wireless module made of high-quality materials, durable.

CC1101 supports a wide supply voltage range of 1.8V to 3.6VDC, ensuring compatibility with different power sources.

Instantaneous maximum working current:

The CC1101 module has enough transmitting power, good spectrum characteristics, small harmonics, small channel crosstalk and ultra small volume.

This wireless transceiver module is an ideal choice for applications that require wireless connectivity, such as IoT devices, remote control systems, and wireless sensor networks.

AOICRIE 3pcs CC1101 Wireless Module with SMA Antenna Wireless Transceiver Module 315/433/868/915MHZ for Raspberry Pi

Networking Transceivers

Buy on Amazon Find on eBay

CC1101 wireless RF transceiver 315/433/868/915MHZ + SMA antenna wireless module made of high-quality materials, durable.

CC1101 supports a wide supply voltage range of 1.8V to 3.6VDC, ensuring compatibility with different power sources.

Instantaneous maximum working current:

The CC1101 module has enough transmitting power, good spectrum characteristics, small harmonics, small channel crosstalk and ultra small volume.

This wireless transceiver module is an ideal choice for applications that require wireless connectivity, such as IoT devices, remote control systems, and wireless sensor networks.

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.

Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A; Trigger Current: 5mA; The Module Operating Voltage:12V.

These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.

Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate; And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient.

Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc.

Read more Read less

AOICRIE 4pcs PC817 4 Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module 817 Voltage Isolation Module

Optocouplers

Buy on Amazon Find on eBay

PC817 4 channel optocoupler isolation board is independent, can control different voltage at then same time.

4-way 817 optocoupler driving port signal voltage:3.6-24V; Output voltage range: 3.6-30V(The output current depends on the specific situation but not over 10MA. When the total power is fixed, the voltage and current are inversely proportional).

4 way 817 optocoupler to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface.

PC817 module jumper cap can be used to determine whether the output terminal is high potential output or low output.

If it is a pulse signal, please note that the limit of 817 is below 3KHZ. If the control signal is greater than 3KHZ, please do not use this module, it will not work properly.

Read more Read less

12pcs TT Motor DC Electric Motor 3V-6V Dual Shaft Geared Motor Magnetic Gearbox Engine Motor for DIY Smart Car Robot Toys Cars Chassis Models Vibration Products

RC Electric Motors

Buy on Amazon Find on eBay

TT Motor Robot Gear Motor, Load Current: 70mA (250mA MAX).

Maximum torque: 800gf cm min (3V) ; No-load speed: 1:48 (3V time).

Recommended Operating Voltage: 3V~12VDC (recommended operating voltage of about 6 to 8V).Voltage:6V; No-Load Current:≤200mA; No-Load Speed:200±10% rpm. Voltage:3V; No-Load Current:≤150mA; No-Load Speed:90±10% rpm.

3V-170mA; 115RPM, 0.7KGf.cm torque, With EMC, strong magnetic, it has an anti-interference ability.

Use For With EMC, strong magnetic, it has an anti-interference ability.Widely used in electric toy products such as robots, four-wheel-drive vehicles and unmanned aerial vehicles. etc.

Aoicrie 2pcs XL6009 Boost Buck DC-DC Adjustable Step-UP Down Power Converter Module

Power Converters

Buy on Amazon Find on eBay

XL6009 Boost Buck DC-DC Adjustable Step-UP Down Power Converter Module

DC-DC Boost Buck adjustable step up down Converter XL6009 Module, Solar Voltage Replaces LM2577 Compatible for Arduino, for Raspberry Pi,SMT32

Module with input and output interfaces, support for cascading multiple modules

Regardless of the input voltage is 5V or 12V or 32V, the output can be stabilized at 12V

Built- 4A efficient MOSFET switches enable efficiency up to 94%(LM2577 current is 3A)

AOICRIE 6pcs Type-C USB 5V 2A Boost Converter Step-Up Power Module 2A 5V Charge Discharge Integrated Module Lithium Battery Charging Protection Board with LED Indicator(USB Not Welded)

Power Converters

Buy on Amazon Find on eBay

Type-C USB 5v 2a boost converter module is a charge discharge integrated module, It supports discharging while charginAOICRIEg. Input voltage range: 5 ~ 5.5V; Boost output current: 2A; Boost conversion efficiency: 92.5% (3.6V Input, 5V 2A Output).

Charging Cycle: When the charging current drops to 100MA after reaching the final float voltage, the charging cycle will be automatically terminated;when the battery voltage drops below 4.1V, the charging cycle will restart.

Charging Protection: When the load current is continuously less than 50mA, the output will be turned off; when the battery voltage is lower than 2.8V, the battery will be pre-charged with a current of 180mA.

External Key Design: The boost converter supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.

Lithium battery charging protection board widely used for mobile phone charging, DIY charging treasure,living furniture and other power applications.

Read more Read less

AOICRIE 10pcs Gas Can Spout Gaskets Rubber Ring Replacement Can Gaskets Fuel Washer Seals Spout Gasket Sealing Rings Replacement Gas Gaskets Compatible with Most Gas Can Spout

Gas Cans

Buy on Amazon Find on eBay

[Long Service Life] The rubber ring can gaskets are made of tensile rubber material, durable and sturdy, not wear or tear, rust and corrosion resistant, flexible and not easy to break or split, supporting a long time service.

[Package Includes] You will receive 10 piece of gas cans spout gaskets, which are sufficient to satisfy your daily application and replacement, you can also send them to your farther, boyfriend and neighbors who need them.

[Replacement Gas Gaskets Size] The fuel washer seals spout gasket size approx. 3.8 cm/ 1.5 inch in outer diameter and 3 cm/ 1.18 inch in inner diameter, please confirm the measurement before your buying.

[Wide Compatibility] The fuel gasket seal is compatible with most gas nozzles, and there is no need to change the seal ring type when using different gas tank outlets, which saves you a lot of time.

[Convenient to Carry and Store] The replacement gas gaskets are convenient for you to store or carry in a plastic storage box, toolbox, backpack, pocket and so on, and they will not occupy too much space in your cabinet when they are not in use.

Read more Read less

AOICRIE 4pcs XL6019 5A High Power Current DC to DC Step-up 5V 6V 12V 24V 3-35V to 5-40V XL6019 Boost Converter Adjustable Voltage Regulator Power Modules

Power Converters

Buy on Amazon Find on eBay

XL6019 5A Current DC to DC Adjustable Boost Power Supply Board Module.

XL6019 Module: Input Voltage: DC 3-35 V(40V Max);Output Voltage: DC 5-40V ( 45V Max Adjustable);Input Current: 5A (Max).

5V to 12V step up converter built-in over-temperature protection, overcurrent protection circuit full set of reliability, high reliability.

Conventional Constant Voltage Output BOOST Fully Integrated Solutions, Integrated MOSFET, Fewer External Components, Smaller Cos System.

Adjust the blue knob of the potentiometer (counterclockwise general impulse, buck clockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage.

AOICRIE 3pcs GY-521 MPU 6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-Axis Accelerometer Gyroscope Sensor Module Pre-Soldered for Raspberry Pi Pico and Other Models

Acceleration Sensors

Buy on Amazon Find on eBay

MPU-6050 MPU6050 Module: adopts the standard IIC communication for communication and is powered by 3V-5V for sustainable use.

3 Axis Accelerometer Gyroscope Module: Gyroscope range: ± 250 500 1000 2000 ° / s; Acceleration range: ± 2 ± 4 ± 8 ± 16 g; Transmission can pass I2C up to 400kHz or SPI up to 20MHz.

MPU 6050 Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.

Universally Compatible: This sensor is easy to use with just about any microcontroller that has an I2C interface, for Raspberry Pi and ESP32 models.

What You Will Get: 3pcs Pre-Soldered GY-521 mpu-6050 mpu6050 3 axis accelerometer sensor. Ready to plug in and go.

Read more Read less

AOICRIE 6pcs PC817 1 Channel Optocoupler Isolation Module 1CH Optocoupler PC817 3-5V 12V 24V Photoelectric Isolator PNP NPN Signal Converter Rail Holder PLC Drive Motor Board

Optocouplers

Buy on Amazon Find on eBay

1-Channel PC817 optocoupler isolation module adopts 5.0 pitch screw terminals for convenient wiring.

1-way 817 optocoupler drive terminal input signal voltage: DC 3V-5V/12V/24V (optional); Output signal voltage: wide voltage suitable for DC1.8V-24V.

The 1-way optocoupler isolation module is suitable for isolation when the output level of the single-chip microcomputer is used to drive inductive components such as motors, and anti-interference protects some circuits of the single-chip microcomputer.

PC817 1 channel way optocoupler isolation board are good as the level converter(NPN-PNP, PNP-NPN), and can also be used to input a signal to MCU in isolation or MCU control another device in isolation.

Photoelectric isolator rail holder PLC drive motor board output level of the single-chip microcomputer is low, and the driving voltage of the driven module is high for level matching.

Read more Read less

AOICRIE 2pcs 2.8" inch ESP32 Display ESP32 Development Board ESP32-2432S028R WiFi Bluetooth Resistive Touch Screen ILI9341 Driver 240X320 Smart Display TFT LCD Module

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

ESP32 Display Module Support: 1. UART/SPI/I2C/PWM/ADC/DAC and other interfaces. 2. OV2640 and OV7670 cameras, built-in flash. 3.picture WiFI upload. 4. TF card. 5. multiple sleep modes. 6. Embedded Lwip and FreeRTOS. 7. STA/AP/STA+AP working mode. 8. Smart Config. 9.AirKiss one-click network configuration. 10. secondary development.

ESP32-2432S028R Multi-function: ESP32 development board is based on the ESP32-DOWDQ6 controller, features a low-power, dual-core CPU with clock frequency up to 240MHZ. It integrates a wealth of resource peripherals, including high-speed SDIO, SPI, UART, and other functionalities.

ESP32 Screen: 2.8" ESP32 Display resistive touchscreen. The display screen is controllable and can be used for APP remote control, remote environmental data collection, remote parameter setting and other batch development applications, IoT filed applications.

ESP32 Display Board Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications.

Comes with 2pcs 2.8" inch esp32 display, 2pcs USB 2.0 to micro USB data cable, 2pcs dupont female to 1.25mm wire, 2pcs touch screen pen.

Read more Read less

AOICRIE AA Battery Holder with Leads 3 AA Battery Holder with Wires(6PCS 3AA)

Battery Holders

Buy on Amazon Find on eBay

Package includes : 6 pcs 3AA battery holder 3*1.5V

Tough material: made of high-quality materials, high strength, good toughness, not easy to crack

Battery holder wires: All battery box holders contain leads, and their ends are tinned wires;

Wire length: 4.72 "/ 12cm; cable diameter: 0.039" / 1mm; cable color: red and black

Suitable for DIY and various DC equipment. It is pre-installed with wires and has screw holes at the bottom.Installation is very convenient.You can assemble according to different size battery boxes, you can get many kinds of DC power

Aoicrie DC-DC 12V to 5V 3A Micro Dual USB Converter Voltage Step Down Regulator Waterproof Power Converters for Car Smartphone

Power Converters

Buy on Amazon Find on eBay

This voltage converter uses high quality industrial-grade chip, with high conversion rate and stability.

It supports 3 intelligent security protection including over-current protection, over temperature protection and output short circuit protection.

With overload/over-current/overheat/low voltage protection, stable performance, Copper wire has great electrical conductivity, low thermal, low carbon and save more power.

Fire retardant plastic casing and organic silicone sealing technology has strong thermal conductivity, IP67 ingress rating, waterproof and shockproof.

Widely used for car stereo, radio, monitoring, LED display, electric fan, motors and other electrical appliances, etc.

AOICRIE 4pcs ESP32 ESP32-C3 Mini Development Board Pre-Soldered ESP32 C3 Supermini WiFi Bluetooth Module 160MHz Running Frequency 2.4GHz Wi-Fi & Bluetooth 5.0 for MicroPython

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

ESP32-C3 mini development board is equipped with a single-core 32-bit RISC-V processor, with a main frequency of up to 160 MHz. ESP32-C3 has 400 KB of built-in SRAM and 384 KB of ROM storage space.

ESP32 C3 Mini is positioned as a high-performance, low-power, cost-effective iot mini development board for low-power iot applications and wireless wearable applications.

EPS32C3 is a dual-mode Wi-Fi and Bluetooth chip. The ESP32-C3 uses a RISC-V processor, a single-core processor with a main frequency of 150 MHz, which integrates Wi-Fi 4 and Bluetooth 5.0 wireless communication.

ESP32-C3 SuperMini is a system-level chip (SoC) MCU with very low power consumption and high integration, which integrates 2.4Ghz Wi-Fi and Bluetooth (Bluttooth) low-end dual-mode wireless communication. consumption.

If external power supply is required, just connect the + level of the external power supply to the position of 5V, GND connects to the negative terminal. (Support 3.3 ~ 6V power supply). Remember that when connecting the external power supply, you cannot access USB, USB and external power supply can only choose one.

Read more Read less

AOICRIE 15pcs Speaker 1 Watt 8 Ohm Mini Speaker 8ohm 1w Full-Range Cavity Advertising Machine Small Speakers 3.3V 5V with JST-PH2.5mm-2 pin Interface for Raspberry Pi Small DIY Electronic Projects

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

High-quality Material: built-in magnetic speaker, durable,and lightweight.

Rated power: 1w； Rated impedance: 8Ω； Size: 15×10×3.5mm(0.6×0.4×0.14inches)； Cord length:80mm(3.1inch).

Stable performance, easy to install, equipped with JST PH1.25mm pin terminals, convenient and reliable, clear sound, providing a long time service for you!

1 Watt 8 Ohm mini speaker is widely compatible with raspberry pi, robot, advertising machine, game machine, integrated machine special speaker, etc.

15pcs 1 Watt 8 Ohm Cavity Mini Speaker Full-Range Cavity Advertising Machine Small Speaker 3.3V 5V with JST-PH2.5mm-2 pin Interface.

AOICRIE 2PCS DS3231 Real Time Clock Module RTC Clock Memory Module 3.3V/5V for Raspberry Pi (2PCS Yellow)

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

The RTC clock module is of complete clock calendar functions include seconds, minutes, hours, day, date, month and year timing , provide valid until the year 2100 leap year compensation

The RTC clock module is of ±3℃ digital temperature sensor, and the timing accuracy kept at ± 5ppm (± 0.432 sec / day)

The RTC clock module has the characteristic of low power consumption, with 1 Hz and 32.768 kHz output

The RTC clock module itself can be adapted to 3.3 V and 5 V system, with -40 ° C to +85 ° C temperature range, easy and convenient to use

for Raspberry pi highest precision clock module DS3231, note board can also use this module.

AOICRIE 12PCS 1X 3V CR2032 Battery Holder Coin Button Cell Battery Holder Case with ON/Off Switch Lead Wire Type (Transparent)

Battery Holders

Buy on Amazon Find on eBay

[High Quality Button Battery Stand Voltage Output] 3V, 1 x 3V CR2032= 3 Volt battery holder

[Coin Cell Battery Holder with Switch Function] Battery holder with cover, safe and short circuit proof; Button battery holder with switch function, ON/OFF switch on battery holder for cr2032, no need to weld switch

[Dimensions of CR2032 Button Battery Holder Case] (L x W x H) / 1.34'' x 0.94'' x 0.24'' / 34 mm x 23.9 mm x 6.1 mm, can hold 1 button battery(battery not included), button battery holder case color: black/white/clear

[Wire Leads] Coin cell battery holder with leads, tinned wire end; Wire Length: 5.3"/13.5 cm; Cable Diameter (count in the PVC isolation around the wire): 0.0393"/1mm

AOICRIE 4pcs Digital LCD Thermometer, Fahrenheit Temperature Digital LCD Fridge Thermometer 1M Cable with Probe for Fridge Freezer Refrigerator Aquarium (Black, Fahrenheit)

Refrigerator Thermometers

Buy on Amazon Find on eBay

High accurate mini digital thermometers. Reads-out in Fahrenheit degrees.

The LCD Display Thermometer is moisture resistant and not affected by the environment, which will give accurate reading and display. 1 meter wire probe useful especially for car owners.

The LCD display thermostat is small so takes up very little space.

Digital LCD Thermometer Temperature Gauge Aquarium Thermometer

It has a simple appearance, unobtrusive design and a easy to read LCD display.Made of durable plastic materials, ideal for use in refrigerators, chillers and deep freezers,and the thermometer has a range of -58°F to +199°F too.

AOICRIE FAQs

Is AOICRIE Legit?

Yes, AOICRIE is a legitmate brand on Amazon. After conducting a comprehensive analysis of 52 customer reviews for AOICRIE products on Amazon, we have determined its average rating. With a strong performance and good quality, AOICRIE has received an average rating of 4.73 from numerous buyers, indicating that AOICRIE are trustworthy and live up to their claims. Therefore, it is safe to make purchases from AOICRIE on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more AOICRIE products?

If you're interested in AOICRIE and want to find more AOICRIE products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type AOICRIE in the search box and hit Enter to see the search results.
Find and click the correct AOICRIE to go to the new page.
Select the products you want in the AOICRIE buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more AOICRIE products.

How does findthisbest choose the top AOICRIE products?

We analyze millions of AOICRIE products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase AOICRIE products via FindThisBest?

Go to the AOICRIE page.
Select the product you want in the AOICRIE buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Aoicrie Lipo Battery Voltage Checker and Alarm, 2..., you can view it on Amazon page.
Place your order on Amazon.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the AOICRIE products, helping you make more informed buying decisions. We recommend best choices of the products from the AOICRIE brand, helping you make better shopping choices with less time and energy.

Similar Brands