Juried Engineering feature image

Juried Engineering

Review rating Review rating Review rating Review rating Review rating 4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Juried Engineering has 259 products for sale. Juried Engineering products range in price from $5.8 to $42.98, and the average price of all the products is about $12.57. It's affordable for most consumers, and you can feel free to pick your favorite products.

We found that most of the Juried Engineering products are manufactured by TI, MICROCHIP, and Texas Instruments. The manufacturers provide Juried Engineering with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Juried Engineering products from the seller Juried Engineering. The brand holds an average rating of 4.94, testifying to its excellent reputation.

Juried Engineering Best Sellers

Last Updated: Jan 11, 2025

Juried Engineering TL084CN TL084 Quad High Slew Rate JFET-Input Operational Amplifier Op-Amp IC Breadboard-Friendly DIP-14 (Pack of 5)

Low Power Consumption: 1.4 mA/ch Typical
Low Input Bias Current: 30 pA, Typical Low Input Offset Current: 5 pA Typical, High Slew Rate: 13 V/μs Typical
Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% Typical, Wide Common-Mode and Differential Voltage Ranges, Common-Mode Input Voltage Range Includes VCC+
High Input Impedance: JFET Input Stage, Latch-Up-Free Operation
Example Applications: Tablets, White goods, Personal electronics, Computers

Juried Engineering MCP23017-E/SP MCP23017 16-Bit I/O Expander with Serial Interface 1.7 MHz I2C Breadboard-Friendly IC DIP-28 (1 Piece)

16 bit remote bidirectional I/O port, Configurable interrupt output pins, INTA and INTB can be configured to operate independently or together
High speed I2C interface: 100 kHz, 400 kHz, 1.7 MHz, Configurable interrupt source, Polarity Inversion register to configure the polarity of the input port data
Three hardware address pins to allow up to eight devices on the bus
External Reset input, Low standby current: 1μA max.
Example Applications: Automation & Process Control, Automotive, Clock & Timing, Consumer Electronics, Defence, Military & Aerospace, Embedded Design & Development, LED Lighting, Industrial, Motor Drive & Control

Juried Engineering CD4001BE IC CMOS Quad 2-Input NOR Gate (Pack of 5)

Propagation delay time = 60 ns (typ.) at CL = 50 pF, VDD = 10 V
Buffered inputs and outputs
Standardized symmetrical output characteristics
100% tested for maximum quiescent current at 20 V
5-V, 10-V, and 15-V parametric ratings

Juried Engineering LM741CN/NOPB LM741CN LM741 Single 44V 1 MHz Operational Amplifier Op Amp Breadboard-Friendly IC DIP-8 (Pack of 5)

The LM741 operational amplifiers which feature improved performance over industry standards like the LM709
The LM741 features overload protection circuitry on the input and output. This prevents possible circuit damage to the device.
The LM741 is designed so that there is no latch-up occurrence when the common-mode range is exceeded. This allows the device to function properly without having to power cycle the device.
The LM741 is pin-to-pin direct replacements for the LM709C, LM201, MC1439, and LM748 in most applications. Direct replacement capabilities allows flexibility in design for replacing obsolete parts.
Example Applications: AV Receivers, Embedded PCs, Netbooks, Video Broadcasting and Infrastructure: Scalable Platforms DVD Recorders and Players, Multichannel Video Transcoders, Pro Audio Mixers

Juried Engineering IC DIP Sockets DIP-14 Machined Round Contact Pins Holes 2.54mm DIP14 DIP-14 Breadboard-Friendly (Pack of 50)

Brand:Juried Engineering, LLC
Number Of Pins:14

Juried Engineering DIP-8 IC DIP Sockets Machined Round Contact Pins Holes Pitch 2.54mm 8-Pin DIP DIP8 DIP 8 Breadboard-Friendly (Pack of 5)

8 Positions
2 Rows
Open Frame
2.54 mm Pitch
Solder Tail Termination

Juried Engineering SN74HC393N SN74HC393 74HC393 Dual 4-Bit Binary Counters Breadboard-Friendly IC DIP-14 (Pack of 5)

Wide Operating Voltage Range of 2 V to 6 V
Outputs Can Drive Up To 10 LSTTL Loads, Low Power Consumption, 80-µA Max ICC, Typical tpd = 13 ns
±4-mA Output Drive at 5 V, Low Input Current of 1 µA Max
Dual 4-Bit Binary Counters With Individual Clocks, Direct Clear for Each 4-Bit Counter
Can Significantly Improve System Densities by Reducing Counter Package Count by 50 Percent

Juried Engineering CD14538BE CD14538B CD14538 CMOS Dual Precision Monostable Multivibrator Breadboard-Friendly IC DIP-16 (Pack of 5)

The CD14538B dual precision monostable multivibrator provides stable retriggerable/resettable one-shot operation for any fixed-voltage timing application.
Retriggerable/resettable capability, Trigger and reset propagation delays independent of RX, CX, Triggering from leading or trailing edge, Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C, 5-V, 10-V, and 15-V parametric ratings
Q and Q buffered outputs available, Separate resets, Replaces CD4538B Type, Wide range of output-pulse widths, Standardized, symmetrical output characteristics
Schmitt-trigger input allows unlimited rise and fall times on +TR and -TR inputs, 100% tested for maximum quiescent current at 20 V, Noise margin (full package-temperature range): 1 V at VDD = 5 V, 2 V at VDD = 10 V, 2.5 V at VDD = 15 V, Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices"
Example Applications: Pulse delay and timing, Pulse shaping

Juried Engineering RC4580IP RC4580 Dual Low-Noise, Low-Distortion Operational Amplifier DIP-8 (Pack of 5)

±2-V to ±18-V Operating Voltage
0.8-µVrms Low Noise Voltage
12-MHz Gain Bandwidth Product
0.0005% Total Harmonic Distortion
5-V/µs Slew Rate

Juried Engineering Photoresistor GL12528 12528 Photo Light Sensitive Resistor Light Dependent Resistor 12 mm GM12528 (1 Piece)

Two Cadmium Sulphide PhotoConductive Cells with spectral responses similar to that of the human eye
Diameter: 12 mm, No. of pins: 2, Type of mounting: PCB Through Hole
Maximum Operating Temperature: +70˚C (Approx.), Dark resistance: 1-20MΩ, Spectral peak: 560nm
Maximum voltage: 250 VDC, Maximum wattage: 200 mW, Light resistance (10 Lux): 10-20 KΩ
Dark resistance: 2 MΩ, Resistance illumination: 3, Response time: 20ms (Rise), 30ms (Down), Example Digital Applications: Streetlight control, Absence/presence (beam breaker), Position sensor, Automatic headlight dimmer, Night light control, Oil burner flame out, Automatic headlight dimmer, Night /street light control, Photoelectric control, Industrial control, Security system, Light-controlled toys/switch. Example Analog Applications: Camera exposure control, Automatic Gain Control

Juried Engineering CD4028BE CD4028 CMOS BCD-to-Decimal or Binary-to-Octal Decoders/Drivers IC Breadboard-Friendly DIP-16 (Pack of 5)

BCD-to-decimal decoding or binary-to-octal decoding, High decoded output drive capability
"Positive logic" inputs and outputs……decoded outputs go high on selection, Medium-speed operation… tPHL, tPLH = 80 ns (typ.) @ VDD = 10 V
Standardized, symmetrical output characteristics, 100% tested for quiescent current at 20 V, 5-V, 10-V, and 15-V parametric ratings
Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C, Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices"
Noise margin (full package-temperature range) = 1 V at VDD = 5 V, 2 V at VDD = 10 V, 2.5 V at VDD = 15 V, Applications: Code conversion Indicator-tube decoder Address decoding-memory selection control

Juried Engineering SN74HC148N SN74HC148 74HC148 8-Line to 3-Line Priority Encoders Breadboard-Friendly IC DIP-16 (Pack of 5)

Wide Operating Voltage Range of 2 V to 6 V
Outputs Can Drive Up To 10 LSTTL Loads, Encode Eight Data Lines to 3-Line Binary (Octal)
Low Power Consumption, 80-µA Max ICC, Typical tpd = 16 ns
±4-mA Output Drive at 5 V, Low Input Current of 1 µA Max
Example Applications: n-Bit Encoding, Code Converters and Generators

Juried Engineering NE5534P NE5534 Low-Noise High-Speed Audio Operational Amplifier IC Op-Amp DIP-8 Breadboard-Friendly (Pack of 6)

The NE5534 devices are high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, and high slew rate.
Unity-Gain Bandwidth 10 MHz Typ and Wide Supply-Voltage Range ±3 V to ±20 V, Equivalent Input Noise Voltage 3.5 nV/√Hz Typ and High Slew Rate 13 V/µs Typ
Common-Mode Rejection Ratio 100 dB Typ and Low Harmonic Distortion
High DC Voltage Gain 100 V/mV Typ and Offset Nulling Capability
Peak-to-Peak Output Voltage Swing 32 V Typ With VCC± = ±18 V and RL = 600 Ω and External Compensation Capability

Juried Engineering NE5532P NE5532 Dual Low-Noise High-Speed Audio Operational Amplifier Op Amp Breadboard-Friendly IC DIP-8 (Pack of 10)

High-performance operational amplifiers combining excellent DC and AC characteristics
Equivalent Input Noise Voltage: 5 nV/√Hz Typ at 1 kHz, Unity-Gain Bandwidth: 10 MHz Typ
Common-Mode Rejection Ratio: 100 dB Typ, High Slew Rate: 9 V/μs Typ
High DC Voltage Gain: 100 V/mV Typ, Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω
Example Applications: AV Receivers, Embedded PCs, Netbooks, Video Broadcasting and Infrastructure: Scalable Platforms DVD Recorders and Players, Multichannel Video Transcoders, Pro Audio Mixers

Juried Engineering OPA2134PA OPA2134 SoundPlus™ Audio Operational Amplifier with Low Distortion, Low Noise and Precision Breadboard-Friendly IC DIP-8 (1 Piece)

The OPA2134 series are ultra-low distortion, low-noise operational amplifiers fully specified for audio applications
Superior Sound Quality, Ultra Low Distortion: 0.00008%, Low Noise: 8 nV/√Hz
True FET-Input: IB = 5pA, High Speed: Slew Rate: 20 V/µs Bandwidth: 8 MHz
High Open-Loop Gain: 120 dB (600 Ω), Wide Supply Range: ±2.5 V to ±18 V
Example Applications: Professional Audio and Music, Line Drivers, Line Receivers, Multimedia Audio, Active Filters, Preamplifiers, Integrators, Crossover Networks

Juried Engineering LF353N LF353 2-Channel Wide Bandwidth JFET Input Operational Amplifier Op Amp Breadboard-Friendly IC DIP-8 (Pack of 5)

The LF353N devices are high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
Internally Trimmed Offset Voltage: 10 mV, Low Input Bias Current: 50pA, Fast Settling Time to 0.01%: 2 μs
Low Input Noise Voltage: 25 nV/√Hz, Low Input Noise Current: 0.01 pA/√Hz
Wide Gain Bandwidth: 4 MHz, High Slew Rate: 13 V/μs, Low Total Harmonic Distortion : ≤0.02%
Low Supply Current: 3.6 mA, High Input Impedance: 1012Ω, Low 1/f Noise Corner: 50 Hz

Juried Engineering 4N26 Optocoupler, Phototransistor Output, with Base Connection Breadboard-Friendly IC DIP-6 (Pack of 10)

If - Forward Current: 80 mA, Maximum Collector Emitter Voltage: 30 V, Maximum Collector Current:100 mA
Response Time (tr : TYP,3 s at VCE=10V, IC=2mA, RL=100 )
Isolation Voltage: 1500 Vrms, Maximum Collector Emitter Saturation Voltage: 0.5 V, Vf - Forward Voltage: 1.5 V, Vr - Reverse Voltage: 6 V
Pd - Power Dissipation: 250 mW
Example Applications: I/O interfaces for computers, System appliances, measuring instruments, Signal transmission between circuits of different potentials and impedances

Juried Engineering CD4069UBE CD4069 CMOS Hex Inverter Breadboard-Friendly IC DIP-14 (Pack of 5)

Standardized symmetrical output characteristics
Medium speed operation: tPHL, tPLH = 30 ns at 10 V (Typical)
100% Tested for quiescent current at 20 V, Meets all requirements of JEDEC tentative standard No. 13B, Standard Specifications for Description of B Series CMOS Devices
Maximum input current of 1 µA at 18 V over full package-temperature range, 100 nA at 18 V and 25°C
Example Applications: Logic inversion, Pulse shaping, Oscillators, High-input-impedance amplifiers

Juried Engineering 4N26 Optocoupler, Phototransistor Output, with Base Connection Breadboard-Friendly IC DIP-6 (Pack of 5)

If - Forward Current: 80 mA, Maximum Collector Emitter Voltage: 30 V, Maximum Collector Current:100 mA
Response Time (tr : TYP,3 s at VCE=10V, IC=2mA, RL=100 )
Isolation Voltage: 1500 Vrms, Maximum Collector Emitter Saturation Voltage: 0.5 V, Vf - Forward Voltage: 1.5 V, Vr - Reverse Voltage: 6 V
Pd - Power Dissipation: 250 mW
Example Applications: I/O interfaces for computers, System appliances, measuring instruments, Signal transmission between circuits of different potentials and impedances

Juried Engineering OPA134PA OPA134 - Mono HiFi SoundPlus High Performance Audio Operational Amplifiers Op-Amp Breadboard-Friendly (Pack of 4)

Superior Sound Quality and High Open-Loop Gain: 120 dB (600 Ω)
Ultra Low Distortion: 0.00008% and Wide Supply Range: ±2.5 V to ±18 V
Low Noise: 8 nV/√Hz
True FET-Input: IB = 5pA
High Speed: Slew Rate: 20 V/µs Bandwidth: 8 MHz

Juried Engineering FAQs

Yes, Juried Engineering is a legitmate brand on Amazon. After conducting a comprehensive analysis of 32 customer reviews for Juried Engineering products on Amazon, we have determined its average rating. With a strong performance and good quality, Juried Engineering has received an average rating of 4.94 from numerous buyers, indicating that Juried Engineering are trustworthy and live up to their claims. Therefore, it is safe to make purchases from Juried Engineering on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Juried Engineering and want to find more Juried Engineering products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Juried Engineering in the search box and hit Enter to see the search results.
  3. Find and click the correct Juried Engineering to go to the new page.
  4. Select the products you want in the Juried Engineering buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Juried Engineering products.

We analyze millions of Juried Engineering products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 259 Juried Engineering products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Juried Engineering page.
  2. Select the product you want in the Juried Engineering buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Juried Engineering TL084CN TL084 Quad High Slew Ra..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the Juried Engineering products are produced by TI, MICROCHIP, and Texas Instruments. The manufacturers provide Juried Engineering with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the Juried Engineering products, helping you make more informed buying decisions. We recommend best choices of the products from the Juried Engineering brand, helping you make better shopping choices with less time and energy.