Ferwooh feature image

Ferwooh

Review rating Review rating Review rating Review rating Review rating 4.4

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Ferwooh has 95 products for sale. Ferwooh products range in price from $4.49 to $49.99, and the average price of all the products is about $13.53. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase Ferwooh products from the seller Ferwooh-US. The brand holds an average rating of 4.36, testifying to its excellent reputation.

Ferwooh Best Sellers

Last Updated: Jan 11, 2025

Ferwooh 20PCS Single Row Straight Female Pin Socket Pin Header Connector Pin Strip 2.54mm Spacing for PCB Board Shield

[Product Name] : 40 Pins 2.54mm/ 0.1 inch single row straight female socket pin strip.Total quantitly: 20PCS.
[Female Pin parameters] : Made of high quality plastic and metal, Type: Female; Pitch: 2.54mm/ 0.1 inch; Number of Needles: 40 Needles; Row Type: Single Row; Installation Angle: Straight. Size: 101 x 11 x 2mm/4 x 0.4 x 0.07 inch (L*W*H).
[Cuttable] you can cut them, or score them with some electronic tool, like soldering iron, and snap them off; They can be cut to any size according to your needs.
[Easy to use] Because the installation angle is straight, it is very convenient to use. You only need to align the male header pins with the female header pins and insert them.
[Application] : Pin headers are ideal connectors for PCB boards and integrated circuits, and are widely used in computers, breadboards, LCD monitors, TVs and other household appliances.

Ferwooh Precise Function Signal Generator Kit XR2206 Frequency Module Sine Triangle Square Output Adjustable 1Hz-1MHz DC 9-12V

[Specifications] Voltage Supply: 9-12V DC Input; Wave forms: Square, Sine, Triangle; Impedance: 600 Ohm + 10%; Frequency: 1Hz-1MHz; Amplitude: 0-3V at 9V DC; Input Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kaHz
[welding steps] The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer.
[Debugging steps] After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time.
[Power] Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity; Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V.
[Please note] these are DIY kits, you need to follow the welding steps in our description and complete the final installation.

Ferwooh 5PCS Laser Sensor Module Non-Modulator Tube Receiver Output High Level + 5PCS KY-008 650nm Laser Sensor Module

[Laser Sensor Module] Size: 1.52CM * 2.22CM; Power supply voltage: 5V;Output:When the laser output it's High level; when no laser light output it's low level;
[Laser Sensor Module] This sensor uses a non-modulated laser receiver, please use on the room which is dark.the sun or other lighting will interfere the using of the product.suggest use in a dark environment.
[Laser Head] Operating voltage: 5V; Power: 5MW; wavelength: 650 nm; OD: 6mm
[Laser Head] This 5V laser head is very easy to use, you can use for Arduino control, controllable laser pointer, theft detection, etc. interesting application devices.
[Laser Head] Demo Code Data Link: https://www.adrive.com/public/hud9j6/k000250-%20Laser%20Sensor%20Modul.rar

Ferwooh USB to TTL Serial Cable Adapter FTDI Chipset FT232 USB Cable TTL 3.3V for Arduino for ESP8266

FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset.
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
The cables are available with a 6-way SIL, 0.1" connector
RX and TX LEDs indicator
RX and TX LEDs indicator;TTL levels is 3.3V; UART interface IC device which handles all the USB signal and protocols

Ferwooh Nextion 3.5'' Display NX4832T035 Resistive Touch Screen HMI TFT Smart Module LCD

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device, it is the best solution to replace traditional LCD and LED. Replace the Nixie tube. It is mainly used in the Internet of Things (IoT) or consumer electronics.
Nextion consists of a hardware part (a series of TFT cards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port for communication. Save users the hassle of wiring. It is easy to adapt the Nextion family HMI to existing projects. Users just need to provide it with a UART.
You can power Nextion 3.5 from the 5V pin on the microcontroller, but this is not recommended. Working with insufficient power can damage the screen, so please use the power board that comes with nextion. See the image for use.
NX4832T035 is a powerful 3.5 inch HMI. Features include: 3.5 inch 480 x 320 TFT resistive touchscreen display, 16MB Flash, 2KB RAM, 65,000 colors. Viewing area: 73.44mm (L) × 48.96mm (W); Uploading a TFT file via an SD card is faster than a 4-pin serial connection, but the credit card is in FAT32 format and does not exceed 32GB.

Ferwooh 2PCS DHT11 Temperature Humidity Sensor Module Detector Digital Single Bus 3.3V-5V with Wires Humidity Measure Range 20%-95% Temperature Measure Range 0-50℃

[Product Detail] DHT11 sensor is a temperature and humidity combined sensor with calibrated digital signal output. It's is a reliable sensor for determining temperature and humidity.
[Product parameter] Working voltage: 3.3V-5V; Output form: digital output; humidity measure range:20%-95%, humidity measurement error is±5%; temperature measure range: 0-50°C, temperature measurement error is ±2 °C.
[Reliable and stable] It uses a dedicated digital module and temperature & humidity collection sensor technology to ensure that products with high reliability and excellent long term stability.
[Easy to use] this sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected; In addition to the operating voltage, only one port is required to connect to the sensor.
[Widely applicable] DHT11 sensor module can be applied in HVAC, dehumidifier, testing and inspection equipment, consumer goods, automobiles, automatic control, weather stations, home appliances, temperature regulators, and other related temperature detection and control.

Ferwooh Nextion Basic Display 2.4'' NX2432T024 2.4inch TFT Resistive Touch Screen Panel 320X240 UART HMI Intelligent LCD Display Module

NX2432T024 is a powerful 2.4'' HMI, a 2.4" TFT 320x240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors.It's easy to adapt Nextion family HMI to existing projects, you just need to provide it a UART. Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB.
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results.
In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

Ferwooh 6PCS 170 Tie Points Mini Breadboard Kit, SYB-170 Solderless Prototype Kit PCB Board + 65PCS Male Cable for Arduino for Raspberry PI DIY Projects

Model: SYB170; Material: ABS plastic board; Hole diameter: 1mm/0.04 inch ; Pitch: 2.54mm/0.1 inch; Size: 47x35x8.5mm / 1.85x1.38x0.33inch; 6 different colors (black, white, green, yellow, blue and red) 170 pin board.
Voltage: 300V; low current: < 5A ; for 22-29awg Jumper Wires; Can be very strong and pin connected without welding, you can quickly do circuit testing.
with fixed metal spring under the connection point for good connections, springs perfectly aligned with the points, makes the tightness of all 170 points the same. Current flows horizontally, there are 5 insertion points on the horizontal current path with low resistance.
Besides, they are quite durable even if you separate them in single wire form. Multiple boards can be connected together for expansion, self-adhesive tape on the back of the bread board (single-sided prototyping PCBs).
Perfect for prototyping circuits, electronic and electrical experiments without soldering; Good for breadboard jumper wires project and other electrical DIY kits. Takes transistors, diodes, LEDs, resistors, capacitors and virtually all types of components.

Ferwooh 10pcs PCB Board Prototype Kit Protoboard Circuit Board Breadboards 432 Holes Perfboard Universal Printed Circuit Breadboard for DIY Soldering Electronic Projects and Electronic Experiment

[PCB parameter] Holes quantity: 432; Thickness: 1.2MM; Diameter of the hole: 1.0mm appx; Hole space: 2.54mm.
[Material and size] the base material is 94HB Bakelite Board; The PCB printed circuit board measures approx. 50 x 70 mm/ 1.97 x 2.76 inch.
[widely used] the PCB prototype blank boards can be applied for sodering and welding LED diode, IC, DIP, connector, resistor, sensor, transistor and other electronic power components or devices with 1 inch pin spacing.
[Easy soldering] the prototype boards are thick, the single-sided PCB prototype stripboard is very handy and easy to solder components and sensors.
[What you get] You can get total 10 pieces single protoboard side copper strip circuit boards, enough to meet your design demands such as electronic experiments and DIY projects.

Ferwooh 3PCS RCWL-0516 RCWL 0516 Microwave Radar Sensor Motion Detection Sensor Human Sensor Body Sensor Module Induction Switch Module

This RCWL-0516 module has the characteristics of high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range, etc. it is widely used in various kinds of human body induction lighting and alarm and so on.
Transmission Signal Processing Control Chip: RCWL-9196, which is specially designed for detecting objects' motion.
Operating voltage: 4.0-28.0V; Working current: 2.8mA~3mA; Output voltage driving capacity: 100mA; Output voltage: 3.2V~3.4V (Typ 3.3V); Output control low level: 0V; Output control high level: 3.3V; Detection distance:5-7M.
Compared with the Traditional Infrared Feeling PIR, RCWL-0516 Microwave Radar Sensor Module With the Penetrating Detection Capability.This microwave detector board can not only detect human but animals and water.
Microwave radar sensor will sense motion through most anything. The more shielding there is, the less detection range you get. I can detect motion through glass, walls, ceilings and floors. It is very sensitive. You might have to filter the power supply.

Ferwooh 3PCS Electret Microphone Amplifier Module MAX4466 Sound Sensor Module Adjustable Gain Blue Breakout Board for Arduino

[Parameters] Power supply voltage: +2.4V~+5.5V (can be directly connected to the main board of development boards); Power rejection rate: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100kΩ) rail-to-rail output; Quiescent power supply current: < 24μA; Gain bandwidth: 600kHz.
[Recommendations] connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply).
[Adjustable] MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x.
If you want to connect the amplifier directly to the speakers. No amplifier or decoupling capacitors are required when connecting to microcontroller pins. Connect the OUT pin directly to the microcontroller's ADC pin.
If your audio equipment requires AC-coupled audio, please connect a 100uF capacitor between the output pin and the input terminal of your device.

Ferwooh MQ131 Ozone Gas Detection Sensor Module Low Concentration Air Quality Monitoring

With analog and TTL level signal output., with the alarm signal indicator
Sensor module with analog signal output, the voltage range: 0-5V
The test concentration range of gas-sensitive elements : 10 to 1000ppb.
Operating voltage: DC 5V
Application:Mainly used for qualitative determination, suitable for home, environmental gas detection equipment, suitable for the detection of ozone gas.

Ferwooh Nextion Basic Display 2.8'' NX3224T028 2.8inch TFT Resistive Touch Screen Panel 320X240 UART HMI LCD Display Module

NX3224T028 is a powerful 2.8'' HMI, TFT 320x240 resistive touch screen display, 4M Flash, 3584 RAM, 65k colors.It's easy to adapt Nextion family HMI to existing projects, you just need to provide it a UART. Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB. With the Nextion Editor software, you can easily create an intuitive touch user interface even if you are a beginner.
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results.
In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

Ferwooh 3PCS ISD1820 Sound Voice Recording Module Recorder Playback Module Board with Mic Sound Audio Loudspeaker

Main chip: ISD1820; Board size: 43 x 38mm/1.7 x 1.5 inch; Power supply: 3-5V; can be connected to the pin header.
This module can directly control 8 ohm 0.5W small speakers, easy to use 10 seconds voice recording and playback.
Can be used as a megaphone module. It can be controlled by a single chip microcomputer.
With loop playback, jog playback, single-pass playback. Recording and playback control mode: button control or single-chip microcomputer, control line IO has been led out.
Recording and playback control mode: button control or single chip microcomputer, control line I/O has been released.

Ferwooh 3.3V AMS1117-3.3 DC-DC DC 4.5V-7V to 3.3V Step Down Power Module AMS1117-3.3V Buck Converter LDO 800MA Voltage Step Down Power Supply Module (Pack of 20PCS)

[Module introduction] AMS1117-3.3 Step Down Power supply buck Converter module, This is a forward regulated step-down power supply module that supports DC 4.75-7V input and 3.3V fixed voltage and 800 mA current output.
[Voltage difference] Input: 4.5 V DC - 7 V ,Output 3.3V, (input voltage must be wining the to the output voltage high 1 V above).
[Easy to be connected] the 3 pins AMS1117-3.3 voltage Stabilizer mini power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
[Where to use] the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear Stabilizer published active power Stabilizer battery charger active instrument.
[Provide more security] AMS1117-3.3 800MA DC antihypertensive module has an overheating control circuit, providing overload and temperature protection, safe and worry-free, bringing you more convenience; work temperature range: -40 to 125 ° C, Welding temperature (25 seconds): 265 ° C, storage temperature: -65 ~ 150 ° C.

Ferwooh 3PCS HC-SR04 Ultrasonic Sensor Module Distance Measuring Sensor Module Ultrasonic Ranging Module + 3 Sets Mounting Bracket with Cable

Power supply: 5 V DC; static current: < 2 mA; Effective angle: < 15 °; Level output: bottom 0V; Recognition distance: 2 cm ~ 450 cm; Resolution: 0.3 cm.
Test removal: high timeline of the sound (340 m /s) /2
On-board wiring methods: VCC, trig (control terminal), echo (receiving terminal), out (empty pin), GND.
Equipped with an anti-reverse pin socket, which makes the cabling much closer and more convenient.
Complete set, with 3PCS HC-SR04 Ultrasonic sensor module and 3 sets of Mounting Bracket and Cable.

Ferwooh 50PCS 40P 2.54mm (0.1 Inch) Pitch Single Row Pin Header Strip Male Pins Header Connector PCB Board Pin Connector Electronic Component Raw Materials

[Product parameters] Pin Pitch :2.54mm/ 0.1 inches; Number of pins: 40pin/ row; Straight single row.
[Easy to use] Straight mounting, Single row, Male pin header, essential electric component, easy to use.Good quality header pins, header pins on 0.1 centers.
[Easily separable] They are easy to be cut to any length if needed.They are suitable for electronic project.
[Widely used] This connector is widely used in electronic circuits, electrical appliances, instruments, PCB circuit boards, welding of various types of circuit boards, electronic components, etc.
[What you can get] Package include 50pcs male header pins male pins are adequate to use for a long time.

Ferwooh 10PCS B5K 5K Ohm Adjustment Single Linear Rotary Taper Potentiometer Shaft 15mm

Product Name: Potentiometer; Resistance value:5 kOhm; Adjustment type: adjustment from above; Rotation angle: 300 ° ± 5 °.
Type: Single Linear; Features: Knurled shaft;
Shaft length: 15mm / 0.59 inch; Shaft Diameter: 6mm/0.23 inch; Thread length: 7mm/0.27inch; Base height: 8mm / 0.31 inch; Base Diameter: 16.4mm/0.64 inch;
Total weight (with plastic box): 70g; Material: electronic metal parts
Package: 10 x 5K Linear Rotating Potentiometer;

Ferwooh 3PCS Stepper Motor Driver Module with Heat Sink for Stepper A4988 3D Printer Reprap

[Easy to operate] this is a complete micro-stepping motor driver with a built-in converter, with heat sink, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed.The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened, Simply inputting one pulse on the STEP input drives the motor one microstep.
[5 different stepping modes] A4988 stepper motor have 5 different stepping modes:such as full-step, half-step, quarter-step, eight-step, sixteen-step.
[output drive capacity] The output drive capacity is suitable for driving 8V-35V, Stepper motors below 2A.
[safe to use] The A4988 stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection.
[Wide range of applications] The A4988 stepper motor drive module is for stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more;

Ferwooh LM386 200 Times Gain Audio Power Amplifier Module 5V-12V Input Power Amplifier Onboard 10K Adjustable Resistor AMP Board for Sound System Speaker DIY(Pack of 3PCS)

[Amplifier parameter] Onboard LM386 chip, with 20 multiplier benefits circuit design, on-board speaker wire holder, on-board 10K variable resistor(adjustable); on-board power indicator; wide operating voltage range: 5-12V.
[Easy to use] The chip's main pin can be input directly, simplifying the setup process and making the device more user-friendly.A convenient screw terminal allows the user to connect a suitable loudspeaker without any soldering.
[Highly-effective] Employs the LM386 Chip: This power amplifier utilizes the highly-effective LM386 chip, leading to superlative sound quality and performance.
[Wide range of applications] LM386 audio power amplifier to be used for driving small speakers or to build an RC sound module.
[Use principle] This audio amplifier module is a mono audio amplifier based on the LM386 chip,It is a very cost effective method of small signal amplification.Very convenient instead of using separate components.

Ferwooh FAQs

Yes, Ferwooh is a legitmate brand on Amazon. After conducting a comprehensive analysis of 15 customer reviews for Ferwooh products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Ferwooh has achieved a respectable rating of 4.36 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Ferwooh on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Ferwooh and want to find more Ferwooh products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Ferwooh in the search box and hit Enter to see the search results.
  3. Find and click the correct Ferwooh to go to the new page.
  4. Select the products you want in the Ferwooh buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Ferwooh products.

We analyze millions of Ferwooh products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 95 Ferwooh products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Ferwooh page.
  2. Select the product you want in the Ferwooh buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Ferwooh 20PCS Single Row Straight Female Pin Socke..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the Ferwooh products, helping you make more informed buying decisions. We recommend best choices of the products from the Ferwooh brand, helping you make better shopping choices with less time and energy.