Skip to content
QCCAN feature image

QCCAN

4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, QCCAN has 124 products for sale. QCCAN products range in price from $8.99 to $19.99, and the average price of all the products is about $11.89. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase QCCAN products from the seller Qccan. The brand holds an average rating of 4.89, testifying to its excellent reputation.

Share

QCCAN Best Sellers

Last Updated: Jan 11, 2025

QCCAN 5pcs 433mhz Wireless RF Transmitter and Receiver with Antenna Ask Remote Control Module DIY Kit for Arduino

  • 433mhz RF Transmitter and Receiver Superheterodyne UHF ASK Remote Control Switch Module For Arduino Wireless Diy Kit.
  • Support ASK / OOK modulation, the receiver sensitivity of -108dBm.
  • Mains input voltage range: 2.2V-5V; Operating frequency: 433.92 MHz, bandwidth of about ± 150KHz.

QCCAN 6PCS Micro USB MP3 Decoder Module TF Card U Disk MP3 Format Decoder Board Amplifier Decoding Audio Player Module 3.7-5.5V

  • Support MP3 format, playing power on automatically.When mp3 is played the red LED flashes.
  • Support U disk (test 32G), TF Card (test 16G) play mode; power on default TF card mode, if the TF card does not exist automatically jump to the U disk mode,and both devices have installed,then you can manually set the play mode.For details please see the key operating instructions
  • Buttons can be adjusted up and down to control songs,volume up and down, pause or play, mode switching.For details please see the key operating instructions.

QCCAN 3pcs Lithium Battery Charger Board LED Dual USB 5V 2.4A Micro/Type-C USB Mobile Power Bank 18650 Charging Module Circuit Protection

  • The module is a portable backup power supply with an input that matches the 5.0V adapter to charge the internal battery. Use built-in battery for portable device to provide 5.0V/3.0A USB2.0 supply output for external devices.
  • Button function: Press and hold the button after standby, the LED digital screen displays the power.
  • Charging cable: support three type of USB Cables for iPhone Lightning & for Android Type-C Micro USB

QCCAN 4PCS JST-XH 2-6S Lipo Battery Charge Balance Board Expansion Board Adapter Converter for JST-XH Connector Balance Board

  • 2-6S battery charger balance board, high quality silicone wires, works with 2S - 6S batteries with a balance plug.
  • With this adapter, work with any battery from 2 cells up to 6 cells. Charge for 2s,3s,4s,5s,6s Lipo battery.Compatible with Mega Power 860 and 960 charger.
  • Accepts batteries with XH style balance plugs, 2-6s capability,fits batteries like Tattu, Bonka, and many others.

QCCAN 4S 40A 14.8V 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit for Drill Motor (4S 40A)…

  • High Quality; Compact size and lightweight;High-accuracy voltage detection circuit; fine workmanship and durable; stable performance.
  • Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection; High charge and discharge current
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.

QCCAN 10pcs 4-Pole 4Pin NL4FC Connector Ohm Plug Speaker Audio Cable Plug Adapter Compatible with Neutrik Speakon NL4FC, NL4FX, NL2FC

  • Package included: 10pcs NL4FC Speaker Connectors 4 Pole 4 Pin Male Audio Cable Adapter for Speakon Jack Ohm Plug.
  • Adopt high-strength ABS shell, two-color color is optional.
  • To be used for the welding of professional stage speakers and power amplifier connecting wires, the outer diameter of the outlet hole is 15mm, and the wire with a maximum width of 10mm can be used.

QCCAN 50PCS Five Colors 12V 10mm LED Light Lamp Bulb Prewired Emitting Diodes Pre-Wired with 20 Holders for DIY Home Decoration(Mix Colors) (Five colors-50pcs)

  • Prewired 10mm LED Light: Lens: 10mm Diameter / Transparent; Emitting Color: 5 colors(Red/Blue/Green/White/Yellow); Current: 20mA; Voltage: 12V (It can also be used with 3V-12V for different brightness purpose); Polarity: Anode (Color Wire) Cathode (Black Wire).
  • Pre wired led diode lights are very bright, energy saving, low power consumption, long service life: 10MM round DC 12V prewired LED lamp light bulb emitting diode Red, life time is more than 5,000 hours
  • 10MM LED Holder Plastic: suitable for use with 10mm LED, light emitting diode holder black for easily attaching LEDs to Boards.

QCCAN 3PCS MAX7219 8x8 Dot Matrix Module LED Display Modules MCU LED Display Single-Chip Control Module DIY Kit with 5pin Wires

  • Module Operating voltage : 5V; Single module can drive the an 8 * 8 dot matrix common cathode.
  • Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. The MAX7219 also allow the user to select code B decoding or no-decode for each digit.
  • Module size : 5 cm X 3.2 cm wide X 1.5 cm high; 4 holes with four screws, the diameter of 3 mm.

QCCAN 4PCS PCF8575 IO Expander Module I2C to 16IO Integrated Circuits

  • available library: PCF8575; I2C address: 0x20(default),can be modified by soldering A1 and A2 selection pads.
  • PCF8575 module allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575 is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.
  • On board 3.3V level converter circuit, if you do not solder VCC-VDD pad, the PCF8575 level is 3.3V. If you solder it, the level will be the same with VCC.

QCCAN 50PCS Five Colors 12V 10mm LED Light Lamp Bulb Prewired Emitting Diodes Pre-Wired with 20 Holders for DIY Home Decoration(Mix Colors) (Red & White-40pcs)

  • Prewired 10mm LED Light: Lens: 10mm Diameter / Transparent; Emitting Color: 5 colors(Red/Blue/Green/White/Yellow); Current: 20mA; Voltage: 12V (It can also be used with 3V-12V for different brightness purpose); Polarity: Anode (Color Wire) Cathode (Black Wire).
  • Pre wired led diode lights are very bright, energy saving, low power consumption, long service life: 10MM round DC 12V prewired LED lamp light bulb emitting diode Red, life time is more than 5,000 hours
  • 10MM LED Holder Plastic: suitable for use with 10mm LED, light emitting diode holder black for easily attaching LEDs to Boards.

QCCAN 6PCS High Precision AS5600 Magnetic Encoder Magnetic Induction Angle Measurement Sensor Module 12bit (6)

  • This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic encoding, and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.
  • AS5600 magnetic encoder high precision, a variety of output modes: IIC , PWM and voltage. Non-contact magnetic induction angle measurement module.
  • Made of high quality material, the module is durable and has long service life. It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent.

QCCAN 5 Sets 433MHZ Wireless Transmitter & Receiver Board Module SYN115 SYN480R Ask/OOK Chip PCB

  • [SYN115] On-board single-chip ASK transmitter chip SYN115/F115. SYN115 is applied to 300-450mhz radio frequency remote control field of high performance, simple, easy to use ASK/OOK(on-off Keyed) transmitter chip.
  • [SYN115] The module supply voltage :1.8-3.6V; The module transmitting frequency: 433MHz; Module output power:
  • [SYN480R] On-board single-chip wireless SYN480R ASK/OOK receiver chip, which is mainly used in the field of radio frequency remote control.

QCCAN 50pcs DC 12V 5mm LED Diodes Kit Diode Lamp Prewired Emitting Diodes with Holder for DIY Home Decoration (Green)

  • Package included: 50pcs 5mm LED Pre-wired Light.
  • Prewired 5mm LED Light: Lens: 5mm Diameter / Transparent; Emitting Color: Green; Voltage: 12V (It can also be used with 3V-12V for different brightness purpose); Maximum current limit: 20mA. Polarity: Anode (Color Wire) Cathode (Black Wire).
  • Good quality and durable.Small size and super bright. Low heat, energy saving, low power consumption, long service life.

QCCAN 8PCS GY-68 BMP180 Digital Barometric Pressure Sensor Module

  • BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices.
  • Pressure range: 300 ~ 1100hPa (9000 meters above sea level ~ -500 meters); Low power consumption: 5μA in standard mode.
  • Using a sensor as capable as the BMP180 you can achieve accuracy of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications.

QCCAN 3PCS 8 Ohm 5 Watt Double Cavity Mini Speaker Full-Range Cavity Advertising Machine Small Speaker with JST-PH2.5mm-2 pin Interface

  • Portable Speakers 10045 LED TV Speaker 8 Ohm 5W Double Diaphragm Bass Computer Speaker DIY for Home Theater.
  • Speaker with 4p cable plug; Pitch: Length: 92MM/3.62in, Width: 36MM/1.42in; Impedance: 8 ohms; Power: 5W.
  • Shape: Rectangle; Diaphragm material: non-paper; Magnetic circuit form: internal magnetic

QCCAN 3pcs Heatbreak All Metal Smooth Upgrade Titanium and Copper Bimetal Throat Nozzle for Ender 3 V2,for Ender 3 Pro,for CR10 3D Printer Hotend

  • Bimetal Material Advantage: This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
  • The all metal heat break works well with high-temp filaments. There is no Teflon to wear or burn,high temperature resistance up to 420℃.
  • NOTE: PLA is NOT recommended. The heat break in the clone version cannot completely avoid PLA clogging when retracting.

QCCAN 2pcs for WEMOS D1 Mini V4.0.0 Type-C USB WiFi Internet of Things Board Based ESP8266 4MB Compatible for Arduino MicroPython Nodemcu

  • For WEMOS D1 Mini V4.0.0 TYPE-C USB WIFI Internet of Things Board based ESP8266 4MB Compatible With Arduino MicroPython Nodemcu
  • 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
  • 1 analog input(3.2V max input)

QCCAN 3PCS SHTC3 High Precision Digital Temperature and Humidity Sensor Measurement Module I2C Communication Better Than AM2302 DHT22

  • Working Voltage: 3.3~5VDC; I2C Interface Output.
  • Pin description: VDD Power Supply 3.3-5.5V DC; GND grounding, power supply negative pole; SDA Serial Data, Two-way Port; SCL Serial Clock, Input Port.
  • Measurement range of humidity:0~100%RH; Precision of humidity measurement: ±2%RH.

QCCAN Breadboard Jumper Wires Kit 4pcs 400 & 830 Point Solderless Breadboards, 560pcs 2-125 mm U-Shape JumperWires &Tweezer, 65pcs M/M Flexible Jumper Wire and 3pcs 20pin Dupont Wire for Arduino

  • Package included for Solderless Breadboard Jumper Wires Kit: 4pcs 400 & 830 Tie-point Breadboards, 560pcs 14 Values U-shape Jumper Wires, 1pcs Tweezer, 65pcs Flexible Jumperwires, and 3pcs 20pin breadboard jumper wires in one set F2F, F2M, M2M pin.
  • Jumper Wires Kit: 14 values lengths 24 AWG U-shape Male to Male jumper wires; Wire Length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm; Quantity: 560 pieces jumper wires in total, 14 lengths, 40 pieces for each size; 65pcs Male to Male flexible jumper wire meet all breadboard connection's needs.
  • Breadboards are made of ABS plastic panel and tin plated phosphor bronze contact sheet. 400 Tie-point Breadboards : 300 tie-point ic-circuit area plus 2x50 tie-point distribution strips providing 4 power rails; 830 Tie-point Breadboards : 630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails.

QCCAN 3PCS for ESP32 D1 Mini NodeMCU ESP-32 WLAN WiFi Bluetooth Development Board Base on ESP8266 Compatible with WeMos D1 Mini

  • New ESP32 D1 mini, mini NodeMcu Lua WiFi board based on ESP-8266. ESP32 Wi-Fi and bluetooth development board compatible with WeMos D1 mini shields (plug and play).
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266, 100% Compatible with WeMos D1 Mini
  • WIFI development board, 4M bytes. 5V 1A switching power supply (switching power supply) on board.

QCCAN FAQs