Steel DN Mate Top 20 Products from Fencing Railings & Pickets Brand

Steel DN Mate Hydraulic Crimping Tool with 9 Harden Dies for Stainless Steel Cable Railing 1/8" 5/32" to 3/16" Hydraulic Crimper, DC01 Battery Cable Crimper Tool

Crimpers

Upgrade Material: Made of durable materials with high strength and good toughness. We adopt unique technology to make harden steel Dies, and crimping head, which has undergone a deep quenching process for smooth crimping. It will ensure that you can successfully complete your work. This is anti-deformative，stronger and harder than #45 Steel, AISI1045.

Application: Hydraulic crimping tool for crimping stainless steel cable railing fittings, various deck railing kits fitting size from 1/8" to 3/16" fittings onto 1/8" to 3/16" cable. Beside, it is prepositional battery cable crimper, apply the same above size.

Specification: Custom designed wire crimping tool Length: 310mm, Weight: approx.N.W 1.75kg. 9 sizes of Dies, include: #4, #6, #8, #10, #16, #25, #35, #50, #70 for crimpingfor cable railing kits; and also can crimps 12 AWG to 2/0 AWG size of copper and aluminum wires.

Easier to use: On-Off control for quick operation, you can crimp easily. The C-style head makes operation easier and better. But don't crimp when there is no wire or dies contact together. After the clamping is completed, just turn back the button, the swagging tool will release automatically. Dies are made of hardened steel with chrome finish, crimped stainless steel fitting terminal is more tight.

Use suggestions: 1. Please give the cirmper'head a good shaking on the soft floor/subjects before turning it on ( just switch off), because the liquid inside produces precipitation afte long time staying still or long time transportation. 2. If pressure fails after pumping, pls do the above step. Or contact Steel DN Mate for technical advice.

Read more Read less

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Deck Railings, Wrench Include-DM50

Buy on Amazon Find on eBay

New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier. [Starting Dec. 14, 2023, Our 100-Pack is Upgraded with 2 Wrenches for Easier, Quicker Installation.]

This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer.

Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4); if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended.

The deck railing lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable railing system usually includes 1/8" lag screw DM50, 1/8" steel cable and cutter DW40, hydraulic Crimper DC01. For angle stair railing, drill guide DG12. You can You can scroll down this page to get them.

We have perfect after-sale service. Steel DN Mate offers with a 10-year warranty Free Service. --If you are a new beginner or not sure how to do it, please contact us by clicking on "by Steel DN Mate" below "add to cart." Let's help you, then you can follow the shopping list to buy all the items in 1 minute.

Read more Read less

Steel DN Mate 100 Pack Black T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8" Black Cable Railing Kit, Deck Stair Railing, DIY Baluster kit, Wrench Included DM45

Buy on Amazon Find on eBay

New design of BLACK deck cable railing kit, clean and elegant. This cable railing hardware is made of stainless steel 316 material, anti-rust, waterproof, and corrosion-resistant, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, both horizontal /vertical and angle applications. With our specially made wrench, installation becomes much easier.

This stainless steel cable railing kit fits 1/8" cable railing system. The black swage lag screws are designed for wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting or damaging the attached wire. This design can make the wire railing kit for decks last longer. And this cable railing won't be easily unfixed or destroyed.

Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4); if you want to build a high-quality cable wire railing, standard 1/8"(OD) cable which was made of T316-stainless steel is recommended. Maximum distance between the 2 end posts should be within 16Ft, post space less than 4ft, cable spacing less than 4inch.

The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Cable deck railing system is not only simple but also won't block your view. A hydraulic crimper (Search “B08BQVKM2Z” or Model number “DC01” on Amazon) is needed to connect the cable to the thread screws.

We have perfect before and after-sale service. Steel DN Mate offers a 10 years warran-ty / F-ree Service. --If you are a new beginner or not sure how to make it, please reach out to us by clicking on "by Steel DN Mate" below "add to cart." Let's help you, then you can follow the shopping list to buy all the items in 1 minute. This black cable railing kit includes 50 pcs left, 50 pcs right hand thread lag screws, 2 wrench and 2 drill bits.

Read more Read less

Steel DN Mate 500ft Black Wire Rope 1/8" T316L Marine Grade Stainless Steel Cable 7 × 7 Strands for Stair Fence Deck Cable Railing System, with Heavy Duty Wire Cutter

Decking Railings

Buy on Amazon Find on eBay

Genuine Marine-Grade T316 Material: Crafted from certified T316 stainless steel for superior corrosion resistance—far better than cheaper T304 or unverified T316, which tend to rust in humid or coastal environments. Meets ASTM standards and built to last indoors, outdoors, and in marine conditions.

Strong Construction – 7×7 strand design, 1/8-inch diameter, 1,800 lbs breaking strength, offering excellent strength and flexibility.

Elegant Finish – Polished, burr-free cable wire that stay intact after cutting, maintain stretch over time, and require hardly no maintenance.

Complete Package – Includes 1×500ft black stainless steel wire rope on a plastic spool for easy handle and 1×cable cutter for easy use. We offer free design consultation, a 10-year warr-ty, and lifetime support.

Versatile Use – Ideal for stair railings, fences, deck railings, string lights, shade sails, clotheslines, and more. In order to assist you in building a cost-effective black cable railing system without obstructing the view, pls scroll down this page to find: lag screw, hydraulic crimper, drill guide, protector sleeve.

Read more Read less

Steel DN Mate 220ft Black Wire Rope 1/8" T316L Marine Grade Stainless Steel Cable 7 × 7 Strands for Stair Fence Deck Cable Railing System, Comes with Wire Cutter

Decking Railings

Buy on Amazon Find on eBay

Genuine Marine-Grade T316 Material: Crafted from certified T316 stainless steel for superior corrosion resistance—far better than cheaper T304 or unverified T316, which tend to rust in humid or coastal environments. Meets ASTM standards and built to last indoors, outdoors, and in marine conditions.

Strong Construction – 7×7 strand design, 1/8-inch diameter, 1,800 lbs breaking strength, offering excellent strength and flexibility.

Elegant Finish – Polished, burr-free cable wire that stay intact after cutting, maintain stretch over time, and require hardly no maintenance.

Versatile Use – Ideal for stair railings, fences, deck railings, string lights, shade sails, clotheslines, and more. In order to assist you in building a cost-effective black cable railing system without obstructing the view, pls scroll down this page to find: lag screw, hydraulic crimper, drill guide, protector sleeve.

Complete Package – Includes 1×220ft black stainless steel wire rope on a plastic spool for easy handle and 1×cable cutter for easy use. We offer free design consultation, a 10-year warr-ty, and lifetime support.

Read more Read less

Steel DN Mate Upgrade Hydraulic Crimping Tool/Hydraulic Crimper with 9 Dies for Stainless Steel Cable Railing System 1/8", 5/32" to 3/16", Cable Railing Hardware Hydraulic Crimping Tool DC03

Crimpers

Buy on Amazon Find on eBay

New Upgrade: Made of durable materials with high strength and good toughness. When the clamping is completed, just turn back the button, the swaging tool will release automatically. Black dies are made of hardened steel with chrome finish, crimped stainless steel fitting terminal is more tight.

Application: Hydraulic crimping tool for crimping stainless steel cable railing fittings, various deck railing kits fitting size from 1/8" to 3/16" fittings onto 1/8" to 3/16" cable. Beside, it is prepositional battery cable crimper, apply the same above size.

Specification: Custom designed wire crimping tool Length: 310mm, Weight: approx.N.W 1.75kg. 9 sizes of Dies, include: #4, #6, #8, #10, #16, #25, #35, #50, #70 for crimpingfor cable railing kits; and also can crimps 12 AWG to 2/0 AWG size of copper and aluminum wires.

Easier to use: On-Off control for quick operation, you can crimp easily. The C-style head makes operation easier and better. But don't crimp when there is no wire or dies contact together.

Use suggestions: 1. Please give the cirmper'head a good shaking on the soft floor/subjects before turning it on ( just switch off), because the liquid inside produces precipitation afte long time staying still or long time transportation. 2. If pressure fails after pumping, pls do the above step. Or contact Steel DN Mate for technical advice.

Read more Read less

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8" Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

Lag Screws

Buy on Amazon Find on eBay

New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 2 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier.

This deck railing hardware fit 1/8" OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable.

Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4); if you want to DIY a high quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended.

By the design of Right & left handed thread, it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won't be easily unfixed or destroyeded. We suggest the following cable rail kits for a cost-effective cable railing system: 1/8" lag screw DM60, 1/8" steel cable and cutter DW40, hydraulic Crimper DC01. For angle stair railing, drill jig DG12 is recommended. You can scroll down this page to find them.

The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. We offer free design before sales, 10 years warranty and lifetime after sales. Any questions, please reach out to us.

Read more Read less

10 Pack Pyramid Aluminum Post Caps for 4x4 Wood Posts (Actual 3.5" x 3.5"), Durable Powder-Coated Fence Post Caps for Deck, Patio, Fence, Weather-Resistant, Rust-Proof PC44

Decking Caps

Buy on Amazon Find on eBay

[𝐅𝐢𝐭 𝐟𝐨𝐫 𝐀𝐜𝐭𝐮𝐚𝐥 𝟑.𝟓𝐗𝟑.𝟓 𝐖𝐨𝐨𝐝 𝐏𝐨𝐬𝐭] 𝟒𝐱𝟒 𝐦𝐚𝐭𝐭𝐞 𝐛𝐥𝐚𝐜𝐤 𝐩𝐲𝐫𝐚𝐦𝐢𝐝 𝐩𝐨𝐬𝐭 𝐜𝐚𝐩 𝐢𝐬 𝐝𝐞𝐬𝐢𝐠𝐧𝐞𝐝 𝐭𝐨 𝐟𝐢𝐭 𝐰𝐨𝐨𝐝 𝐩𝐨𝐬𝐭𝐬 𝐦𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 𝟑.𝟓" 𝐭𝐨 𝟑.𝟔" . 𝐓𝐡𝐞 𝟑.𝟔" 𝐢𝐧𝐭𝐞𝐫𝐧𝐚𝐥 𝐰𝐢𝐝𝐭𝐡 𝐚𝐥𝐥𝐨𝐰𝐬 𝐟𝐨𝐫 𝐬𝐥𝐢𝐠𝐡𝐭 𝐨𝐯𝐞𝐫𝐬𝐢𝐳𝐢𝐧𝐠 𝐨𝐟 𝐬𝐭𝐚𝐧𝐝𝐚𝐫𝐝 𝟑.𝟓" 𝐩𝐨𝐬𝐭𝐬 𝐝𝐮𝐞 𝐭𝐨 𝐦𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 𝐯𝐚𝐫𝐢𝐚𝐭𝐢𝐨𝐧𝐬, 𝐞𝐧𝐬𝐮𝐫𝐢𝐧𝐠 𝐚 𝐬𝐞𝐜𝐮𝐫𝐞, 𝐡𝐚𝐬𝐬𝐥𝐞-𝐟𝐫𝐞𝐞 𝐟𝐢𝐭. Made with 2mm thick walls and a 0.48" lip for added strength and stability. The matte black finish offers a sleek, modern look, while the 1.5" total height gives it a clean, low-profile appearance

[𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐀𝐥𝐮𝐦𝐢𝐧𝐮𝐦] Made of high-quality aluminum alloy with a matte black powder-coated finish, these metal post caps are anti-corrosion, rust-proof, and UV-protected for long-lasting durability. Unlike plastic caps that crack or fade, our aluminum caps are built to last for years

[𝐒𝐭𝐮𝐫𝐝𝐲 𝐏𝐲𝐫𝐚𝐦𝐢𝐝 𝐃𝐞𝐬𝐢𝐠𝐧] Featuring a durable pyramid design, these post caps withstand wind, rain, and harsh weather, staying securely in place. Their sleek, minimalist pyramid look adds modern elegance to any fence

[𝐒𝐚𝐟𝐞 𝐚𝐧𝐝 𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲] Designed with rounded edges, these deck post caps 4×4 are safe to handle and won't cause injuries during installation or use. Perfect for families with kids or pets—safe and worry-free!

[𝐎𝐧𝐞-𝐒𝐭𝐞𝐩 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧] Each package includes 10 pack of black 4x4 fence post caps and 20 rustproof screws. Simply place the cap on your 4x4 wood post (actual 3.5” x 3.5”) and secure it with the provided screws—installation in one simple step! Quick and hassle-free, only a drill required. Backed by a 30-year warranty, we're confident in the long-term durability and quality of our 4x4 post caps. If you have any concerns, contact us anytime—your satisfaction is our priority.

Read more Read less

Steel DN Mate 220FT 1/8" Genuine T316 Stainless Steel Cable for Deck Cable Railing, Stair & Fence Systems, Marine Grade 7x7 Strand Wire Rope with Cutter – Corrosion-Resistant, ASTM Certified DW22

Decking Railings

Buy on Amazon Find on eBay

Genuine Marine-Grade T316 Material: Crafted from certified T316 stainless steel for superior corrosion resistance—far better than cheaper T304 or unverified T316, which tend to rust in humid or coastal environments. Meets ASTM standards and built to last indoors, outdoors, and in marine conditions.

Size: 1/8 Inch Diameter, equal 3.2 MM, stronger than other steel wire cables with 3.0 MM Diameter. It will not loosen over the time. The polishing strands are neatly wound together to form a smooth surface without burrs.

Solid Construction: 7×7 Strand, consisting of 7 groups of 7 strands braided together to form a strong, flexible cable that is superior to other cable configurations. 1800 lb Breaking Strength，safe tension 260 pounds.

Wide Application: Clean, elegant. It is very suitable for Indoor and Outdoor. Ideal for installing a deck railing, fence and supporting strings light, shade sail, etc.

Package: 220 feet steel cable, comes with a plastic spool for ease of use and convenient storage, and a heavy duty cutter to ease your job. If you have any question, pls feel free to contact us, we'll be glad to do you a favour at any time.

Read more Read less

DN Mate 40 PCS Deck Railing Bracket Connectors for 2x4 (Actual 1.5”x3.5”) Wood Deck Railing Post to Handrail, Stair Railing Connectors with Coated Wood Screws,Drill Bit, Fence Railing Brackets

Decking Railings

Buy on Amazon Find on eBay

[Engineered Anti-Crack Nylon with reinforcing fiberglass] Our deck railing bracket is made of reinforced Nylon 66 + high-strength fiberglass, specially engineered to resist cracking, bending, and deformation—even under hammer strikes or 300lbs heavy loads. More durable and affordable than rust-prone metal brackets, providing a long-lasting structure for your deck railing

[Fits 2x4 Wood handrail Actual 1.5” x 3.5”] Designed for 2x4 handrails (actual 1.5” x 3.5”), the bracket measures 4" x 2.6" x 0.6" and comes with 1.5” hardened, rust-proof screws. Ideal for level and angled stair railings (light trimming only needed) on decks, fences, porches, and balconies

[Unique Drainage Notch] Our brackets for 2x4 handrail feature an exclusive drainage notch design not found in other brackets. This prevents water buildup and protects railing posts while helping your deck railings last up to 50 years

[Elegant Anti-Fade Curves and Quick Install] These 2x4 fence brackets feature three smooth, rhythmic curves with a fade-resistant finish for a simple, elegant look. The sloped top allows easy wood placement, while side holes angled at 30° enhance strength and security. Quick and easy to install in just 4 simple steps, taking about 2 minutes

[Buy with Confidence] Each package includes 40 deck railing connectors, 280 anti-rust screws, and 1 drill bit. With full confidence in our product quality, we provide a 60-day money-back guarantee and a 10-year replacement warranty. Feel free to contact us with any questions or concerns

Read more Read less

Steel DN Mate 100 Pack Stainless Steel Protector Sleeves for 1/8”, 5/32", 3/16" Wire Rope Cable, Black Cable Railing Kit Hardware for Wood Post, T316 Marine Grade DB58

Decking Railings

Buy on Amazon Find on eBay

Material: The deck railing protective sleeves are made of T316 Stainless Steel marine grade, offering enhanced corrosion resistance and hardness compared to 316. T316 stainless steel excels even in acidic environments, granting these deck railing kits exceptional environmental resilience, with no maintenance pressure even in harsh coastal conditions.

Simple and Clean Look：The black deck railing post sleeves can cover uneven holes after drilling, creating a clean and simple look. These stainless steel protectors feature an elegant black finish, perfect for a minimalist and natural style.

Application: Black cable railing protector sleeves are designed to shield relatively soft wooden posts from friction wear. They help maintain cable tension to prevent vibration. Please note that this balustrade hardware can only be used in intermediate wood posts, not suitable for metal or angle posts.

Size: total length: 13/16 inch; inner diameter: 7/32 inch; Drill Bit Diameter: 6.5MM. These cable protectors fit for 1/8" 5/32" and 3/16" cable railing system. Calculation of sleeves quantity needed: 2 × QTY of intermediate posts × QTY of cable runs.

Package: 100 Pcs Black Stainless Steel Protector Sleeves and A Free Drill Bit. We offer a 10 years warrant-y, kindly reach us at anytime.

Read more Read less

Steel DN Mate 20 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Included DM10

Buy on Amazon Find on eBay

New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, terrace railings, and deck railings. With our new made wrench, installation becomes much easier.

This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer.

Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4); if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended.

The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A hydraulic crimper (Search “B08BQVKM2Z” on Amazon) is needed to connect the stainless steel cable to lag screws.

We have perfect after-sale service. Steel DN Mate offers with a 10-year warranty Free Service. --If you are a new beginner or not sure how to do it, please contact us by clicking on "by Steel DN Mate" below "add to cart." Let's help you, then you can follow the shopping list to buy all the items in 1 minute.

Read more Read less

Steel DN Mate 200 Pack Stainless Steel Protector Sleeves for 1/8" Wire Rope, Cable Railing Hardware for Deck/Cable Railing System, T316 Marine Grade, Cable Sleeves Come with a Drill Bit DE05

Decking Railings

Buy on Amazon Find on eBay

Material：The cable railing kit is made of T316 stainless steel marine grade, which is strong tensile strength, very sturdy and durable. It is rust and corrosion resistant, designed to install indoor and outdoor deck railing, even in coastal areas. Refund guarantee if the sleeves rust. Please download the“User Manual (PDF)”under Product guides and documents

Protect posts and maintain cable tension. This stainless steel protective sleeve is designed to prevent damage to the relatively soft wood posts from friction wear. It can maintain the cable tension to prevent vibration. Important Note, this level cable railing hardware can only be used in intermediate wood posts, not suitable for metal or angle posts.

Stylish clean appearance but the most cost effective. This cable railing kit covers the rough holes after drilling, provides a stylish clean. This cable railing system won't block your view when you rest on deck. Also nearly no maintenance required. Unlike turnbuckle systerm, this simple deck cable system, (protectors+ lag screw) cuts down the cost by 1/4. We think it combines of strength, light weight, appearance and cost effectiveness, perfect for residential or commercial.

DIY a high cost-effective cable rail system, refer to Picture NO. 6: Protector sleeves DE05, 1/8" steel cable with cutter DW22, hydraulic crimper DC01, swage lag screw DM30, drill jig DG12. For the angle stair balustrade hardware, angle protector sleeve DF05 is recommended. You can scroll down this page to buy them all from Steel DN Mate in 2 minutes.

Size: total length: 13/16 inch; hole inner diameter: 5/32 inch; Drill Bit Diameter: 6.5MM. These T316 protector sleeves fit for 1/8" cable railing system. Calculation of sleeves quantity needed: 2 × QTY of intermediate posts × QTY of cable runs. Package list: 200 PCS stainless steel protector sleeves, a PC drill bit.

Read more Read less

16 Pack Pyramid Aluminum Post Caps for 6x6 Wood Posts (Actual 5.5" x 5.5") ，Durable Powder-Coated Fence Post Caps for Decks, Patios, Fences, Weather-Resistant, Rust-Proof PC66

Decking Caps

Buy on Amazon Find on eBay

[𝐅𝐢𝐭 𝐟𝐨𝐫 𝐀𝐜𝐭𝐮𝐚𝐥 𝟓.𝟓𝐱𝟓.𝟓 𝐖𝐨𝐨𝐝 𝐏𝐨𝐬𝐭] 𝟔𝐱𝟔 𝐦𝐚𝐭𝐭𝐞 𝐩𝐲𝐫𝐚𝐦𝐢𝐝 𝐩𝐨𝐬𝐭 𝐜𝐚𝐩 𝐢𝐬 𝐝𝐞𝐬𝐢𝐠𝐧𝐞𝐝 𝐭𝐨 𝐟𝐢𝐭 𝐰𝐨𝐨𝐝 𝐩𝐨𝐬𝐭𝐬 𝐦𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 𝟓.𝟓" 𝐱 𝟓.𝟓" 𝐭𝐨 𝟓.𝟔" 𝐱 𝟓.𝟔" (𝐧𝐨𝐭 𝐟𝐨𝐫 𝐨𝐭𝐡𝐞𝐫 𝐬𝐢𝐳𝐞𝐬). 𝐓𝐡𝐞 𝟓.𝟔" 𝐢𝐧𝐭𝐞𝐫𝐧𝐚𝐥 𝐰𝐢𝐝𝐭𝐡 𝐚𝐥𝐥𝐨𝐰𝐬 𝐟𝐨𝐫 𝐬𝐥𝐢𝐠𝐡𝐭 𝐨𝐯𝐞𝐫𝐬𝐢𝐳𝐢𝐧𝐠 𝐨𝐟 𝐬𝐭𝐚𝐧𝐝𝐚𝐫𝐝 𝟓.𝟓" 𝐩𝐨𝐬𝐭𝐬 𝐝𝐮𝐞 𝐭𝐨 𝐦𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 𝐯𝐚𝐫𝐢𝐚𝐭𝐢𝐨𝐧𝐬, 𝐞𝐧𝐬𝐮𝐫𝐢𝐧𝐠 𝐚 𝐬𝐞𝐜𝐮𝐫𝐞, 𝐡𝐚𝐬𝐬𝐥𝐞-𝐟𝐫𝐞𝐞 𝐟𝐢𝐭. Made with 2mm thick walls and a 0.9" lip for added strength and stability. The matte black finish offers a sleek, modern look, while the 2" total height gives it a clean appearance

[𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐀𝐥𝐮𝐦𝐢𝐧𝐮𝐦] Crafted from high-quality aluminum alloy with a matte black powder-coated finish, these post caps are rust-proof, corrosion-resistant, and UV-protected. Unlike plastic caps that crack or fade, our aluminum caps are built to last for years

[𝐒𝐭𝐮𝐫𝐝𝐲 𝐏𝐲𝐫𝐚𝐦𝐢𝐝 𝐃𝐞𝐬𝐢𝐠𝐧] Built to endure harsh weather conditions, these pyramid-shaped post caps resist wind, rain, and UV exposure, ensuring long-lasting stability. Their sleek, modern design adds a touch of elegance to any fence

[𝐅𝐚𝐦𝐢𝐥𝐲-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐒𝐚𝐟𝐞𝐭𝐲] Featuring rounded edges, these deck post caps are safe to handle, making them ideal for homes with children or pets. Enjoy peace of mind knowing they're designed to prevent injuries during installation or daily use

[𝐄𝐟𝐟𝐨𝐫𝐭𝐥𝐞𝐬𝐬 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧] Each package includes 16 pack of black 6x6 fence post caps and 32 screws. Simply place the cap on your 6x6 wood post (actual 5.5” x 5.5”) and secure it with the provided screws—installation in one simple step! Quick and hassle-free, only a drill required. We're confident in the quality of our 6x6 post caps. If you have any concerns, contact us—your satisfaction is our priority!

Read more Read less

Steel DN Mate 7.6" Steel Wire Cutter, Cut All Wires Up to 5/32", Wire Rope Cutter, Cut Steel Cable, Aircraft Cable, Wire Seals, Bike Cable, Aluminum/Copper Wire, Fence Cable, One-Hand Operate CC-11

Wire Cutters

Buy on Amazon Find on eBay

[Well-made Heavy Duty Wire Cutter] The cable cutter is excellent at cutting all kinds of wire rope, stainless steel cable, aluminum wire, fences, aircraft, bike cable, electrical cable, guitar strings, and garage door cables，baling wire, aircraft cable. It can be used widely. It cuts like BUTTER, you can find 1/8” stainless steel wire cable by search DW11.

[Sharp & Clean Cut] The blade is made of manganese steel and hardened by induction quenching. It is very sharp and durable. The steel cable cutter make precise and clean cuts, not fraying and smashing cable ends.

[Easy to Use] First, turn the black lock to open, put the cable into the middle of the blade, then press the handle to cut it. It can one hand operation. The safety lock protects you from accidentally opening it and causing injury.

[Max Cuting Capacity] Up to 5/32" Steel Wire Rope, 3/16" Hard Steel Wire, 3/16" Aircraft Cable, 15/64" Copper & Aluminum Cable, 1/4" Soft Wire Rope.

[After-Sales] If you have any issue, please feel free to contact us. Note, there is coating of lube or grease for rust protection in the cutter head, you can easily wipe off with a paper towel.

Read more Read less

Steel DN Mate 10pairs Black Cable Railing Kit, T316 Stainless Steel 1/8” Swage Toggle Turnbuckle Hardware for Wood Posts, Stair Deck Cable Railing System, 180°Adjustable Angle Wire Railing Kit BH10

Decking Railings

Buy on Amazon Find on eBay

[𝗠𝗮𝗿𝗶𝗻𝗲 𝗚𝗿𝗮𝗱𝗲 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹] This black cable railing hardware is made of premium quality T316 marine grade stainless steel, which is anti-rust and anti-c-friendly, especially for beginners who might not cut the cable to the precise length.

[𝗘𝗮𝘀𝘆 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻] This wire railing hardware requires no pre-drilling; simply install by tightening screws and crimping the 1/8'' stainless steel cable. And you can easily adjust the angle and length you want. For the necessary tool, a crimper (search for DC03) in our store is all you need.

[𝗪𝗶𝗱𝗲 𝗔𝗱𝗷𝘂𝘀𝘁𝗺𝗲𝗻𝘁] The deck railing kit allows free adjustments from 0 to 180 degrees, versatile for various stair and deck railing angles. The adjustable closed-body design enables the turnbuckle to freely adjust length, making it userno pre-drilling; simply install by tightening screws and crimping the 1/8'' stainless steel cable. And you can easily adjust the angle and length you want. For the necessary tool, a crimping tool (search for DC03) in our store is all you need.

[𝗖𝗹𝗲𝗮𝗻 𝗢𝘂𝘁𝗹𝗼𝗼𝗸] Our stainless steel cable railing kit features an integrated design, ensuring an unobstructed view and a clean, sleek appearance. The classic black finish of those wire railing kit complements different railing styles, and will surely enhance the modern aesthetics of your living space.

[𝗖𝗼𝗻𝗳𝗶𝗱𝗲𝗻𝘁 𝘁𝗼 𝗕𝘂𝘆] There are 10 runs included. This package comes with 10 pcs Turnbuckles, 10 pcs Toggle Ends, 40 pcs Steel Screws, 1pc upgraded wrench+screw driver. We provide a 10-year warranty and lifetime service. If you're a beginner or unsure about the installation, please feel free to reach out with any questions.

Read more Read less

Steel DN Mate 20 Pack 3/16" Swage Lag Screws, T316 Stainless Steel Left & Right Handed Thread, 3/16" Cable Railing Kit for Wood Post, Deck Railing/Stair Railing, DIY Baluster Cable Railing Hardware

Decking Railings

Buy on Amazon Find on eBay

New design of deck cable railing kit, clean and elegant. This cable railing hardware is made of stainless steel 316 material, anti-rust, waterproof, and corrosion-resistant, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, both horizontal /vertical and angle applications. With our specially made wrench, installation becomes much easier.

This stainless steel cable railing kit fits 3/16" cable railing system. The swage lag screws are designed for wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting or damaging the attached wire. This design can make the wire railing kit for decks last longer. And this cable railing won't be easily unfixed or destroyed.

Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4); if you want to build a high-quality cable wire railing, standard 3/16" (OD) cable which was made of T316-stainless steel is recommended. Maximum distance between the 2 end posts should be within 16Ft, post space less than 4ft, cable spacing less than 4inch.

The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A hydraulic crimper (Search “B08BQVKM2Z” or Model number “DC01” on Amazon) is needed to connect the cable to lag screws.

We have perfect before and after-sale service. --If you are a new beginner or not sure how to build cable deck railing system, please reach t us by clicking on "by Steel DN Mate" below "add to cart." Let's help you, then you can follow the shopping list to buy all the items in 1 minute.

Read more Read less

Steel DN Mate 30 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector Sleeve for 1/8" Deck Cable Railing kit with a Drill Bit, DIY Balustrade DT03

Decking Railings

Buy on Amazon Find on eBay

Reliable Material：These Protector Sleeves are made of premium quality T316 marine grade stainless steel, which has durability and corrosion resistance. We offer 2 year refund guarantee if it get rusty.

Design: The design of 30° protector sleeves can replace the combination of straight sleeves + 30° beveled washer, it can insert into the hole perfectly. It is a hole fitting for 1/8" wood post Cable runs, where the hole is drilled at an angle about 30 degrees in the wooden post. Sleeve Inner diameter:5/32 inch, fits for 1/8” cable railing.

Application: This fitting is ideal for cleanly finishing drilled holes on intermediate angled posts used on stairways and ramps. In addition, protective sleeves can be used to prevent the holes in the wood from collapsing under the tension of steel wire. The fitting can be installed on both sides of intermediate posts as well as the inner side of terminal posts.

See picture 5 for a cost-effective cable railing system. Scroll down the page to quickly access the matching products and get a complete set of railing system components, including 1/8" swage lag screw (DM30), 1/8" wire rope with cutter (DW55), hydraulic crimper (DC01), and level protector sleeve (DP05).

Package includes 30packs angle sleeves, a wood drill bit (1/4"). This angle cable railing kit can withstand exposure to saltwater, high humidity, and other harsh weather conditions, which ensure safety and longevity of your cable railing system. Buy it with easy, Steel DN Mate team works with every effort to provide quality products and professional service.

Read more Read less

Steel DN Mate Aluminum Multi-Angle Drill Guide with F Clamp, 30 45 90 Degree 4 Sizes Guide Track Cable Railing Kit Stair Deck Template Jig for Straight and Angle Hole Wood Post, DG12

Decking Railings

Buy on Amazon Find on eBay

Ultra harden Drill Guide：The drill Guide is made of premium solid aluminum 6061, harder than alu alloy, CNC anodized orange finish, excellent wear and corrosion resistance. We embed hardened chrome-plated steel sleeves in the drill guide for accurate drilling, preventing wear or expand during the drilling.

Patent Design, Easily Operate: The angled drill guide has a dedicated area, ensuring consistent clamping without covering any holes. Scale lines on all sides of the drill block indicate hole centers for easy and precise drilling, saving you time. PLEASE NOTE: Use a drill bit smaller than the hole for easy passage during drilling.

3 Drilling Angle 4 Size Holes: There are 3 different fixed angles: 30 degree, 45 degree and 90 degree. 4 different size holes: 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.93mm), and 3/8" (9.52mm). You can freely choose the desired angle and size to drill the required holes. Building a cable railing system becomes much easier and more convenient with it.

Equipped with a sturdy 6" F-clamp, work with the Template jig guide for stability, no shaking, and speeds up drilling. Note: The F-clamp has a throat depth of 2 inches and a maximum opening capacity of 6 inches. Ideal for various DIY projects, including deck cable railings. Recommended for use with Steel DN Mate cable railing kit.

Worried Free: We are fully confident in the durability of our portable dowel drill guide. Fit for straight holes and angle holes and it is a very helpful tool for Decking Railings. Scroll down to see a wide range of cable railing kits, made by Steel DN Mate.

Read more Read less

10 Pack Aluminum Deck Railing Bracket Connectors for 2"x4" (Actual 1.5"x3.5") Handrail to Wood Posts Connection, 2mm Extra Thick Metal Connectors for Fence Porch Stair, SA20

Decking Railings

Buy on Amazon Find on eBay

[𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐀𝐥𝐮𝐦𝐢𝐧𝐮𝐦 𝐰𝐢𝐭𝐡 𝟐-𝐋𝐚𝐲𝐞𝐫 𝐂𝐨𝐚𝐭𝐢𝐧𝐠] Built tough yet stylish! Made of 2mm thick ADC-12 aluminum, our brackets outlast steel and plastic—no bending, no rust. The 2-layer coating resists extreme weather, from scorching sun to salty air. Perfect for decks, ceilings—so impressive, your neighbors will ask for the link!

[𝐑𝐨𝐛𝐮𝐬𝐭 𝐓𝐫𝐢𝐚𝐧𝐠𝐥𝐞 𝐃𝐞𝐬𝐢𝐠𝐧] Engineered for superior strength, with a 500 lb load capacity, exceeding IRC safety standards. The reinforced triangle structure ensures rock-solid stability, while three drainage notches prevent water buildup for long-term durability.

[𝐅𝐢𝐭 𝟐𝐱𝟒 𝐖𝐨𝐨𝐝] Our 2x4 bracket fit for 2x4 handrail post (actual 1.5''X3.5''). These included screws are hardened treated, coated rust-proof. The side 4 screw holes for attaching handrail to the post angle at 30 degree could increase double weight capacity.

[𝟐 𝐐𝐮𝐢𝐜𝐤 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧 𝐌𝐞𝐭𝐡𝐨𝐝𝐬] Our fence bracket offers 2 quick installation methods for you to choose from, allowing for installation 2 times as fast as other brackets. Compatible with level and angled railings, just trim the wood for a perfect fit.

[𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞] Includes 10 brackets, 70 screws, and an installation guide. Steel DN Mate offers a 60-day money-back guarantee and a 10-year replacement warranty. We're confident in the quality of our brackets. If you have any concerns, contact us—your satisfaction is our priority!

Read more Read less

Steel DN Mate

Steel DN Mate Best Sellers

Steel DN Mate Hydraulic Crimping Tool with 9 Harden Dies for Stainless Steel Cable Railing 1/8" 5/32" to 3/16" Hydraulic Crimper, DC01 Battery Cable Crimper Tool

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Deck Railings, Wrench Include-DM50

Steel DN Mate 100 Pack Black T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8" Black Cable Railing Kit, Deck Stair Railing, DIY Baluster kit, Wrench Included DM45

Steel DN Mate 500ft Black Wire Rope 1/8" T316L Marine Grade Stainless Steel Cable 7 × 7 Strands for Stair Fence Deck Cable Railing System, with Heavy Duty Wire Cutter

Steel DN Mate 220ft Black Wire Rope 1/8" T316L Marine Grade Stainless Steel Cable 7 × 7 Strands for Stair Fence Deck Cable Railing System, Comes with Wire Cutter

Steel DN Mate Upgrade Hydraulic Crimping Tool/Hydraulic Crimper with 9 Dies for Stainless Steel Cable Railing System 1/8", 5/32" to 3/16", Cable Railing Hardware Hydraulic Crimping Tool DC03

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8" Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

10 Pack Pyramid Aluminum Post Caps for 4x4 Wood Posts (Actual 3.5" x 3.5"), Durable Powder-Coated Fence Post Caps for Deck, Patio, Fence, Weather-Resistant, Rust-Proof PC44

Steel DN Mate 220FT 1/8" Genuine T316 Stainless Steel Cable for Deck Cable Railing, Stair & Fence Systems, Marine Grade 7x7 Strand Wire Rope with Cutter – Corrosion-Resistant, ASTM Certified DW22

DN Mate 40 PCS Deck Railing Bracket Connectors for 2x4 (Actual 1.5”x3.5”) Wood Deck Railing Post to Handrail, Stair Railing Connectors with Coated Wood Screws,Drill Bit, Fence Railing Brackets

Steel DN Mate 100 Pack Stainless Steel Protector Sleeves for 1/8”, 5/32", 3/16" Wire Rope Cable, Black Cable Railing Kit Hardware for Wood Post, T316 Marine Grade DB58

Steel DN Mate 20 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Included DM10

Steel DN Mate 200 Pack Stainless Steel Protector Sleeves for 1/8" Wire Rope, Cable Railing Hardware for Deck/Cable Railing System, T316 Marine Grade, Cable Sleeves Come with a Drill Bit DE05

16 Pack Pyramid Aluminum Post Caps for 6x6 Wood Posts (Actual 5.5" x 5.5") ，Durable Powder-Coated Fence Post Caps for Decks, Patios, Fences, Weather-Resistant, Rust-Proof PC66

Steel DN Mate 7.6" Steel Wire Cutter, Cut All Wires Up to 5/32", Wire Rope Cutter, Cut Steel Cable, Aircraft Cable, Wire Seals, Bike Cable, Aluminum/Copper Wire, Fence Cable, One-Hand Operate CC-11

Steel DN Mate 10pairs Black Cable Railing Kit, T316 Stainless Steel 1/8” Swage Toggle Turnbuckle Hardware for Wood Posts, Stair Deck Cable Railing System, 180°Adjustable Angle Wire Railing Kit BH10

Steel DN Mate 20 Pack 3/16" Swage Lag Screws, T316 Stainless Steel Left & Right Handed Thread, 3/16" Cable Railing Kit for Wood Post, Deck Railing/Stair Railing, DIY Baluster Cable Railing Hardware

Steel DN Mate 30 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector Sleeve for 1/8" Deck Cable Railing kit with a Drill Bit, DIY Balustrade DT03

Steel DN Mate Aluminum Multi-Angle Drill Guide with F Clamp, 30 45 90 Degree 4 Sizes Guide Track Cable Railing Kit Stair Deck Template Jig for Straight and Angle Hole Wood Post, DG12

10 Pack Aluminum Deck Railing Bracket Connectors for 2"x4" (Actual 1.5"x3.5") Handrail to Wood Posts Connection, 2mm Extra Thick Metal Connectors for Fence Porch Stair, SA20

Steel DN Mate FAQs

Steel DN Mate

Steel DN Mate Best Sellers

Steel DN Mate Hydraulic Crimping Tool with 9 Harden Dies for Stainless Steel Cable Railing 1/8" 5/32" to 3/16" Hydraulic Crimper, DC01 Battery Cable Crimper Tool

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Deck Railings, Wrench Include-DM50

Steel DN Mate 100 Pack Black T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8" Black Cable Railing Kit, Deck Stair Railing, DIY Baluster kit, Wrench Included DM45

Steel DN Mate 500ft Black Wire Rope 1/8" T316L Marine Grade Stainless Steel Cable 7 × 7 Strands for Stair Fence Deck Cable Railing System, with Heavy Duty Wire Cutter

Steel DN Mate 220ft Black Wire Rope 1/8" T316L Marine Grade Stainless Steel Cable 7 × 7 Strands for Stair Fence Deck Cable Railing System, Comes with Wire Cutter

Steel DN Mate Upgrade Hydraulic Crimping Tool/Hydraulic Crimper with 9 Dies for Stainless Steel Cable Railing System 1/8", 5/32" to 3/16", Cable Railing Hardware Hydraulic Crimping Tool DC03

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8" Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

10 Pack Pyramid Aluminum Post Caps for 4x4 Wood Posts (Actual 3.5" x 3.5"), Durable Powder-Coated Fence Post Caps for Deck, Patio, Fence, Weather-Resistant, Rust-Proof PC44

Steel DN Mate 220FT 1/8" Genuine T316 Stainless Steel Cable for Deck Cable Railing, Stair & Fence Systems, Marine Grade 7x7 Strand Wire Rope with Cutter – Corrosion-Resistant, ASTM Certified DW22

DN Mate 40 PCS Deck Railing Bracket Connectors for 2x4 (Actual 1.5”x3.5”) Wood Deck Railing Post to Handrail, Stair Railing Connectors with Coated Wood Screws,Drill Bit, Fence Railing Brackets

Steel DN Mate 100 Pack Stainless Steel Protector Sleeves for 1/8”, 5/32", 3/16" Wire Rope Cable, Black Cable Railing Kit Hardware for Wood Post, T316 Marine Grade DB58

Steel DN Mate 20 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Included DM10

Steel DN Mate 200 Pack Stainless Steel Protector Sleeves for 1/8" Wire Rope, Cable Railing Hardware for Deck/Cable Railing System, T316 Marine Grade, Cable Sleeves Come with a Drill Bit DE05

16 Pack Pyramid Aluminum Post Caps for 6x6 Wood Posts (Actual 5.5" x 5.5") ，Durable Powder-Coated Fence Post Caps for Decks, Patios, Fences, Weather-Resistant, Rust-Proof PC66

Steel DN Mate 7.6" Steel Wire Cutter, Cut All Wires Up to 5/32", Wire Rope Cutter, Cut Steel Cable, Aircraft Cable, Wire Seals, Bike Cable, Aluminum/Copper Wire, Fence Cable, One-Hand Operate CC-11

Steel DN Mate 10pairs Black Cable Railing Kit, T316 Stainless Steel 1/8” Swage Toggle Turnbuckle Hardware for Wood Posts, Stair Deck Cable Railing System, 180°Adjustable Angle Wire Railing Kit BH10

Steel DN Mate 20 Pack 3/16" Swage Lag Screws, T316 Stainless Steel Left & Right Handed Thread, 3/16" Cable Railing Kit for Wood Post, Deck Railing/Stair Railing, DIY Baluster Cable Railing Hardware

Steel DN Mate 30 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector Sleeve for 1/8" Deck Cable Railing kit with a Drill Bit, DIY Balustrade DT03

Steel DN Mate Aluminum Multi-Angle Drill Guide with F Clamp, 30 45 90 Degree 4 Sizes Guide Track Cable Railing Kit Stair Deck Template Jig for Straight and Angle Hole Wood Post, DG12

10 Pack Aluminum Deck Railing Bracket Connectors for 2"x4" (Actual 1.5"x3.5") Handrail to Wood Posts Connection, 2mm Extra Thick Metal Connectors for Fence Porch Stair, SA20

Steel DN Mate FAQs

Similar Brands