Skip to content
PMD Products feature image

PMD Products

4.2 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, PMD Products has 133 products for sale. PMD Products products range in price from $8.99 to $134.99, and the average price of all the products is about $51.21.

You can confidently purchase PMD Products products from the seller PMD Products. The brand holds an average rating of 4.2, testifying to its excellent reputation.

Share

PMD Products Best Sellers

Last Updated: Jan 12, 2025

PMD Products Solid Rubber Auto Lift Block Spacer Pad 6-3/8" x 4-3/4" x 3" (160mm x 120mm x 75mm) for Automobile Lifts, Jacks, Racks

  • Car vehicle lift ramp replacement pads 3" height, 4 solid Natural Rubber lift block pads
  • Application: used with low rise lifts , rolling jacks and some inground lifts
  • Used to to prevent vehicle rocker panel and/or running boards from being damaged when lifting a vehicle.

PMD Products Solid Rubber Auto Lift Block Spacer Pad 6-3/8" x 4-3/4" x 2" (160mm x 120mm x 50mm) for Automobile Lifts, Jacks, Racks

  • Car vehicle lift ramp replacement pads, 4 solid Natural Rubber lift block pads
  • Application: used with low rise lifts , rolling jacks and some inground lifts
  • Used to to prevent vehicle rocker panel and/or running boards from being damaged when lifting a vehicle.

PMD Products Diesel Engine Compression Pressure Tester is Compatible with Repair and Replace on GM Duramax Ford Powerstroke Cummins International NAVISTAR Detroit CAT Perkins Engines 1000PSI

  • Best kit for the most popular truck/tractor engines for use on Cummins 5.9, Ford Powerstroke 6.0L, 6.4L, 6.7L, 7.3L (both styles), International Navistar 6.9/7.3L, International Navistar 4.5L VT275, 6.0L VT365E, 6.4L MaxxForce 7
  • Compatible with Repair and Replace on Cummins V6, V8, V12, 855, 5.9L, Detroit Diesel 53, 71, 92, 110, 149, V53, V71 with low or high clamp inj. hold down
  • Compatible with Repair and Replace on GM Duramax 4.3/5.7/6.2/6.5L/6.6L , CAT D-336, 1674, 1676, 3406, 3408, 3412; PERKINS 4.203, 4.236, 4.248, 6.354, 8.540

PMD Products Magnetic Camber Caster King Pin Gauge Automobile Car Truck Wheel Alignment Tool

  • Mounts onto a hub or brake disc for quick and accurate measurement of camber & castor angles. Also does king pin inclination
  • On the rear there are two brass adjuster knobs, one to zero the bubble during angle measurement and the other for adjusting the king pin inclination.
  • The ÿCamber gauge has fixed graduation from +5ø to -5ø

PMD Products 10-Piece Tube Cleaning Brush Kit | Brass Wire Bore Brushes & Stainless Steel Brushes 12" Long (1/4" to 3/4") for Tubes, Cylinders, and Narrow Spaces

  • Multi Size Cleaning Brush Kit: This 10-piece Tube Cleaning Brush Kit includes 5 steel wire brushes and 5 stainless steel brushes in various sizes, from 1/4" to 3/4". Ideal for engine cleaning, metal rust removal, and detailed cleaning tasks. It's your go-to set for thorough cleaning!
  • Access Hard-to-Reach Areas: These 12" metal brushes with a 4" brush area easily clean 3/8 stainless steel tubing, tight spaces, and narrow areas.
  • Heavy-Duty Build: Designed with twisted wire handles, flexible shaft and a storage loop, these durable metal brushes are designed for tough cleaning tasks, making them perfect for heavy-duty use.

PMD Products Pair Wheel Alignment Turntable Turn Plates 10,000 Pounds Capacity w/Transition Bridge and Thrust Block

  • Kit includes: 2 Steel 5 Ton (each) Wheel Alignment Turntable Plates w/ 2 drive on passing transition rubber bridges and rubber thrust blocks
  • Turntables have Gold pointer with scale. Plates are 13-3/4" diameter x 2" Tall, Platform is 15-3/5", weight is 34lbs
  • Plates adjust 0-50 degrees left and right, Indicator Pin with scale to 60 degrees

Seal Driver Disc Tool Set – 52pc Deluxe Bushing Removal Tool & Hydraulic Press Accessories – Durable Aluminum & Carbon Steel Driver Set for Automotive and Industrial Use

  • COMPREHESIVE KIT FOR VERSATILE APPLICATIONS: Includes 50 interchangeable pieces, offering 2,450 size variations, covering bushing removal and seal installation from 3/4" to 2-15/16", perfect for automotive and industrial tasks.
  • DURABLE AND EASY TO USE: Made from corrosion-resistant carbon steel with an anodyne black oxide coating for extra durability. Ergonomic handle provides a comfortable grip for precise bushing and seal installation without damage.
  • ORGANIZED AND PORTABLE: Comes with a sturdy, water-resistant molded plastic case that keeps all pieces organized and secure, ideal for mobile repairs.

PMD Products Padded Flooring Jack for Installing, Straightening Laminate or Hardwood Wood Tile Floor Boards

  • Hand Free Nailing of Hardwood Flooring. Can be used with any floor thickness
  • Now with FELT protected bottom and end surfaces to avoid damage the flooring for Carefree installation of hardwood floors
  • Always have straight floorboards by bringing crooked planks into place for nailing

PMD Products Self-Tightening 5 Ton Frame & Body Repair Small Mouth Pull Clamp (2 Way)

  • Self tightening clamp, grips tighter as it is pulled.
  • Two-way pull operation. Butts against panels where only narrow bite available.
  • Compact and lightweight for pulling from many places

PMD Products 3 Arm Replacement Stones for Engine Cylinder Hone 180 Grit 4" Long X 5/8 Wide …

  • 3 Stone w/ holder dimensions: 4" L x 5/8" W x 3/4" H
  • 180 grit Aluminum oxide stones bonded to aluminum stone holder
  • Fits most models of 3 arm hones including PMD Products, KD, Harbor Freight and Greatneck (OEM)

PMD Products Tool is Compatible with Repair and Replace of BMW E36 E46 Rear Axle Bushings

  • For use on BMW E36 E46 Chassis
  • Designed to remove the press fit the solid metallic rear suspension bushings (bushes/joints) located in the bearing carrier
  • Allows removal and installation of rear outer ball joint

PMD Products Crankshaft Harmonic Balancer Puller Holder is Compatible with Repair and Replace of Mercedes Benz M112 M113 M137 Engines

  • This tool will not work with your Benz as this tool works with only with the engine models listed below

PMD Products 3 Arm 4" Long X 5/8 Wide Replacement Honing Stones for Engine Cylinder Hone - 600 Grit

  • Stone w/ holder dimensions: 4" L x 5/8" W x 3/4" H
  • 600 grit Aluminum oxide stones bonded to aluminum stone holder
  • Fits most models of 3 arm hones including PMD Products, KD, Harbor Freight and Greatneck (OEM)

PMD Products GM Transmission Shifter Seal Remover Installer Turbo 300 350 400 700-R4 4L60 Includes Seal

  • Precision made tool is mandatory to remove the leaky seal around the shifter selector shaft mechanism through the transmission case.
  • Product upgrade (Jan 2020): the tool is machined a few thousands more due to the GM shifter shaft has a high spot on shaft near where GM formed threads
  • This handy tool will let you remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission.

PMD Products 2 Pound Solid Brass Hammer with Hickory Wood Handle Non Marring Non Sparking 2lb

  • Non-marring hammer ideal for striking surfaces that may be damaged by ordinary hammers
  • Rugged resilent hickory wood handle
  • Splinter resistant Hickory handle

PMD Products 3D DSP Wheel Alignment Rack Tool for Camber Caster Gauge Adapter Rim Clamp Mount Mounting

  • Works great with most all magnetic camber & caster gauges - Magnetic Camber Gauge in pictures is not included in this sale
  • Can be used on aluminum and steel wheels, fit almost any type of wheel Mounts to rim edge
  • Fits from 11" to 25" rims, 2 settings. Reversible Hunter style rim locating pins

PMD Products Forged Ball Joint Press Kit - 4WD Ball Joint/U Joint/C Frame Press Service Tool Set with Case for GM, Dodge, Ford Vehicles

  • Versatile Installation and Removal: Effortlessly remove and install press-fit ball joints with this comprehensive ball joint press kit. Ideal for GM, Dodge, and Ford 4WD trucks and passenger vehicles, this ball joint removal tool is perfect for both professional mechanics and weekend warriors.
  • Enhanced Efficiency with Reduced Friction: The C-frame press, equipped with inner ball bearings, significantly reduces friction on the threaded forcing screw. This design makes the ball joint press operation smoother and quicker, enhancing your efficiency during tough jobs.
  • Complete Set of Receiver Tubes: This ball joint press kit includes receiver tubes sized 2-1/4"L x 2.723" ID, 1-3/4"L x 2-1/4" ID, and 1-¾"L x 1-3/4" ID. These sizes ensure compatibility with a wide range of vehicles, providing the flexibility needed for various automotive repairs.

PMD Products AC Clutch Removal Tool - 23 Piece Compressor Tool kit - Complete Set of Automotive Tools - Mechanic Tool Set for Removal and Installation of air Conditioner Clutch hub with Spanner

  • Compressor clutch removal tool for GM, Ford, Chrysler, Sanden, Nippondenso, Delphi, DKS, and Zexel compressors.
  • The kit will remove the clutch hub from all the compressor listed.
  • he kit also contains all the necessary tools to reinstall a clutch hub back onto the compressor.

PMD Products FAQs