* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.
When purchasing a product, price is the consumer's primary concern. At present, Platinum Tools has 245 products for sale. Platinum Tools products range in price from $35.17 to $215, and the average price of all the products is about $78.96.
We found that most of the Platinum Tools products are manufactured by North Coast Electric and Tjernlund Products – Audio. The manufacturers provide Platinum Tools with a steady supply of products, and they have a good cooperative relationship with each other.
You can confidently purchase Platinum Tools products from the seller Low Voltage Supply. The brand holds an average rating of 4.6, testifying to its excellent reputation.
Share
Platinum Tools Best Sellers
Last Updated: Jan 12, 2025
Platinum Tools 100054C Clamshell EZ-Rjpro Hd Crimp Tool
- Ratcheted, high leverage and stable platform for consistent, repeatable terminations
- Patented "crimp and trim system" delivers a clean, flush trim on the extended conductors for all EZ Connectors
- Tool steel die head assembly provides 360 degrees of connector support
Platinum Tools Ezex44 Connector 100/Jar Accessory Box (202044J)
- Hi-lo Stagger isolates each conductor for higher performance
- Simple one piece/pass through design, No bars or liners
- Insulation diameter (conductor) size range: 0.039" To 0.044"/ 1.0 to 1.12 mm
Platinum Tools 100061C EXO Crimp Frame with EXO-EX Die Set for ezEX-RJ45 Connectors
- Pass through design allows for easy verification of wiring sequence
- One-piece design — bars or liners are not required
- Rated up to 10 gigabit for superior performance
Platinum Tools 100010C EZ-RJ45 Cat 6+ Connectors, Clamshell, 50-Pieces, RED
- Simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front
- Technician can easily verify the proper wiring order
- Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector
Platinum Tools Ezex48 Connector 100/Jar Accessory Box (202048J)
- Hi-lo Stagger isolates each conductor for higher performance
- Simple one piece/pass through design, No bars or liners
- Insulation diameter (conductor) size range: 0.043" - 0.048" (1.09 -1.22 mm)
Platinum 202016J EZ-RJ45 Cat 6 Connector and Strain Relief Combo Kit, 50-Pieces
- EZ-RJ45 connectors have a simple one piece design
- Prolong patch cord life with the Cat5e strain reliefs
- Strain reliefs maintain bend radiuses for standards compliance
Platinum Tools 100062C EXO Crimp Frame with EZ-RJ45 Die for EZ-RJ45 Connectors
- Reversible ez-rj45 Die for ambidextrous Operation
- Connectors lock into tool for correct positioning during crimp
- Ergonomic comfort grip TPR handles
Platinum Tools 99652 Ratcheting Wrench Set, 1 Pack
- Item Package Height:53.594 Centimeters
- Item Package Length:4.064 Centimeters
- Item Package Width:13.97 Centimeters
Platinum Tools EZ-RJ45 Die for EXO Crimp Frame Clamshell Accessory Box (100072C), Blue
- Single cycle Crimp and flush trim
- Ez-rj45 die is easily interchangeable
- Reversible ez-rj45 die for ambidextrous Operation
Platinum Tools EZ-RJ45 Crimp Tool for RJ-11, RJ-12 and RJ-45
- Crimps and trims extended wire in EZ-RJ45 Connector in a single cycle.
- For use with EZ-RJ45 Cat 5/5e and Cat 6 Connectors.
- Will also work on most other RJ-11, RJ-12 and RJ-45 connectors. (Except AMP)
Platinum Tools 202020J EZ-RJ45 Shielded Internal Ground, 50-Pack
- EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs
- Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance
- Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk and considerably improved immunity to noise at all frequencies
Platinum Tools Exo Ezex-RJ45 Termination and Test Kit Box (90148)
- Easiest way to terminate large Cat6 cabling
- Single cycle Crimp and flush trim saves time
- Reversible Exo die for ambidextrous Operation
Platinum Tools EZ-RJ45 CAT5/5e Connectors (Jar of 100) - 202003J
- Through holes allow wire pairs to be inserted through front of connector for faster terminations
- Easy to verify wire sequence
- Reduces scrap by eliminating wasted crimps
Platinum Tools Ezex48 Shielded RJ45 External Ground Connector 25/Clamshell Accessory Box (100027C)
- Solid or stranded 23-22 AWG
- Simple one piece/pass through design, No bars or liners
- Hi-lo Stagger to isolate each conductor
Platinum Tools 12520C EZ-RJ45 PTS PRO Crimp Tool
- Crimps both EZ-RJ45 and ezEX Platinum Tools connectors
- Crimps standard pass-through and standard RJ45 connectors
- Connector locking mechanism for audible “click” when the connector is inserted into the tool
Platinum Tools 99653 XL Ratcheting Wrench, 1 Pack
- Package Dimensions: 22 L x 4 H x 4 W (inches)
- Package Weight: 3.8 pounds
- Country of Origin : Taiwan, Province Of China
Platinum Tools Exo-Ex Die for EXO Crimp Frame Clamshell Accessory Box (100071C)
- Single cycle Crimp and flush trim
- Easily interchangeable
- Reversible for ambidextrous Operation
