BLIKA Top 20 Products from Decking Railings Brand

BLIKA 100 Pack T316 Stainless Steel Black Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

Decking Railings

[Applications] Black swage lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections, you can create a sleek, moden look throughout your home. BLIKA high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications. Black cable railing swage lag screws perfect for planning your DIY cable railing project, staircases, balconies and decking areas.

[Size] Black cable railing swage lag screw is suitable for 2"x2", 4"x4", 6"x6" wood posts. Thread Length = 2", Thread Diameter = 1/4", Hole Size = 1/8", Overall Length = 4", Hole Depth = 1.57", Pull Out= 580kg. BLIKA black swage lag screws are compatible with other brands' 1/8 inch stainless cable and cable railing kit. Left & Right handed thread swage lag screws rotate in the same direction to tighten the cable without twisting or damaging the cable.

[T316 Stainless Steel] Black cable railing kit is made of marine grade T316 stainless steel, black oxidized coating offers additional corrosion resistance, wear resistance and weather protection which make our balustrade hardware suitable for coastal installations. this swage lag screw system kit will not flake off over time. Black cable railing system requires hardly any maintenance.

[Easy to Install] The black deck railing swage lag screws can adjust the cable tension by screwing the threaded end into wood post, be careful not to tension your cable railing too much. The included reinforced wrenches make the work easier. It is recommended you use two people for installation of this system. These swage lag screws require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & cable cutter: B083Z5JQJ9. Please watch our installation video or installation guidance.

[Package List] 50 x Black swage lag screws left+ 50 x Black swage lag screws right + 2 x Spanner Multi Tool + 2 Free Drill Bit +User Manual. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us. We are committed to all after-sales, so that buyers can better obtain satisfactory service.

Read more Read less

BLIKA Complete Set 36" Stair Railing Post Kit(Post 35"x2"x2"), Black 25-35° Angle Drilled Line Post, Invisible Cable Railing System Kit Include 4Pack Stair Posts, 1/8" Stainless Cable(No Handrail)

Decking Railings

Buy on Amazon Find on eBay

[Application] The cable post serves as both a structural end and middle post in stair sections, compatible with 25 to 35 degrees staircases. The black cable railing post kits are designed to fit 1/8" wire rope, making them suitable for DIY stair railings, patio railings, deck railings and more outdoor and indoor railing projects. These cable railing kits feature a smooth surface, with both the posts and wire ropes in a sleek black finish, creating a modern and elegant look for your railing system.

[Stainless Steel] Our railing posts are made of premium T304 stainless steel with a matte black powder-coated finish, making them seismically strong and durable. Wire rope and cable railing fittings are all made of T316 stainless steel, which is corrosion and rust resistant. Rubber grommets will prevent the cable from wearing into the metal posts. BLIKA black cable railing post system is ideal for both indoor and outdoor projects due to its strength and durability.

[Free Design & Multiple Options] BLIKA cable railing kits can be ordered to fit your needs regardless of your project layout. Multiple kit options to suit every household's needs. All you need to do is measure each deck/stair side and order a kit(s) that most closely match the lengths you need. BLIKA cable railing posts are pre-drilled with 10 holes spaced 3 1/8" apart on the surface to comply with the 4" sphere test. Please make sure the span between two structural posts does not exceed 4ft.

[Simple Installation] Our cable railing kits require a special swaging tool in order to secure them on the wire(Hydraulic Crimper Tool: B083Z5JQJ9). Swaged fittings make stair railing installation faster and cheaper than swageless—ideal for large projects. Please note that this package doesn't include handrails, please purchase separately if needed: BLIKA BL01-T. To support your DIY efforts, we offer the installation videos and installation guidance.

[Package List] The BLIKA DIY complete kit includes 4 pack 35" 25-35 degrees stair railing posts, 220FT T316 stainless steel wire rope with cable cutter, 20 pack black invisible cable railing kits(need hydraulic crimper tool), 20 pack black angle washers, 80 pack 30 degree cable railing rubber grommets and installation guides. BLIKA is committed to providing premium and affordable products for your cable railing project. If you are not satisfied with your purchase, please feel free to contact us.

Read more Read less

BLIKA 10 Ton Hydraulic Crimping Tool and Cable Cutter, Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 11 Dies, Wire Swaging Tool for 1/8" to 3/16" Cable Railing Hardware

Crimpers

Buy on Amazon Find on eBay

[Compatibility] Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic crimper's head can be rotated 180° freely to benefit narrow space working, a good choice for battery and welding cables, power wires, electrical cables, etc.

[Material] Cable railing crimper is made of durable materials with high strength and good toughness. Sturdy and compact structure. Black Oxide Crimp Head and Dies won't chip or flake. Dies are made of hardened steel with chrome finish. Vinyl-dipped grip for comfort and easy control.

[Black 11 Pcs Crimping Dies] This cable railing crimping tool comes with crimping dies for 1/8", 3/16", 12 AWG, 10 AWG, 9 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG cables and creates strong, hexagonal crimps for a clean, efficient look for your projects. Die 1/8" fit for 1/8" cable railing hardware. Die 3/16" fit for 3/16" cable railing hardware.

[Easy to use] On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. C-shaped pressing head for easy insertation of the crimping dies and for the easy positioning of the cable, head rotates 180°. Dies can be used at multiple angles for easy crimping in any direction. Vinyl-dipped grip for comfort and control.

[Package List] 1X Hydraulic Crimper Tool + 11 pairs of Crimping Dies + 1X Cable Cutter + Seal Rings + 1X Work Gloves + 1X Carrying Case. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement.

Read more Read less

BLIKA 36" Level Drilled Cable Railing Post(Post 35"x2"x2"), Flat Top Surface Mount Deck Post, Stainless Steel Black Powder Coated Finish Cable Handrail Post for Deck Railing, BL02-LP

Decking Railings

Buy on Amazon Find on eBay

[Application] This level drilled post serves as both a structural end and an intermediate post in leveled sections. The black cable railing post kits are designed to fit 1/8" wire rope, making them suitable for DIY stair railings, patio railings, deck railings and other outdoor and indoor railing projects. These cable railing kits feature a smooth surface, with both the posts and wire ropes in a sleek black finish, creating a modern and elegant look for your railing system.

[Stainless Steel] Our railing posts are made of premium T304 stainless steel with a matte black powder-coated finish, making them seismically strong and durable. Wire rope and cable railing fittings are all made of T316 stainless steel, which is corrosion and rust resistant. Cable Railing rubber grommets will prevent the cable from wearing into the metal posts. BLIKA black cable railing post system is ideal for both indoor and outdoor projects due to its strength and durability.

[Railing Building Code] Our stainless steel black cable railing posts are pre-drilled with 10 holes spaced 3 1/8" apart on the surface to comply with the 4" sphere test. Please make sure the span between two structural posts does not exceed 4ft. If the span between any two structural posts is increased to 7ft, you'll need a structural post every 8 feet with an intermediate space every 4ft between structural posts. Please consult the local building authority for regulations.

[Beginner Friendly] BLIKA pre-drilled level post is beginner friendly, you can follow the steps in the detailed installation. Our flat top bracket features a hassle-free installation, seamlessly attaching to flat handrails for a perfect fit. It's designed to save you time and effort, making your cable railing system setup both quick and rock-solid. To complete your deck cable railing project, we offer matching corner posts: BLIKA BL02-CP, stair post: BLIKA BL01-SP and cable railing handrail: BLIKA BL01-T.

[Package List] The BLIKA DIY cable railing kit includes 1 pack 35"x2"x2" level drilled cable railing post, 25 pack cable railing rubber grommets and installation guides. BLIKA is committed to providing premium and affordable products for your cable railing project. If you are not satisfied with your purchase, please feel free to contact us.

Read more Read less

BLIKA 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

Buy on Amazon Find on eBay

[Applications] Swage lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections. BLIKA high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications. Cable railing swage lag screws perfect for planning your DIY cable railing project, staircases, balconies and decking areas. Get the job done effortlessly with our extra-thick wrench—built to outlast others.

[Size] Cable railing lag screws for 2"x2", 4"x4", 6"x6" wood posts. Thread Length = 2", Thread Diameter = 1/4", Hole Size = 1/8", Overall Length = 4", Hole Depth = 1.57", Pull Out= 580kg. BLIKA swage lag screws are compatible with other brands' 1/8 inch stainless cable and cable railing kit. Left & Right handed thread swage lag screws rotate in the same direction to tighten the cable without twisting or damaging the cable.

[T316 Stainless Steel] Deck wire railing kits is made of stainless steel T316 marine grade. High tensile strength and anti-fatigue strength weatherproof, super strong resistance to rust and corrosion which make our balustrade hardware suitable for coastal installations. BLIKA cable railing system requires hardly any maintenance.

[Easy to Install] The deck railing swage lag screws can adjust the cable tension by screwing the threaded end into wood post, be careful not to tension your cable railing too much. The included reinforced wrenches make the work easier. It is recommended you use two people for installation of this system. These swage lag screws require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & cable cutter: B083Z5JQJ9. Please watch our installation video or installation guidance.

[Package List] 50 x Swage lag screws left+ 50 x Swage lag screws right + 2 x Spanner Multi Tool + 2 Free Drill Bit + User Manual. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us. We are committed to all after-sales, so that buyers can better obtain satisfactory service.

Read more Read less

BLIKA 50 Pack Invisible Cable Railing kit, T316 Stainless Steel 1/8" Invisible Receiver and Swage Stud End for Cable Railing, Swage Tensioner 1/8" for Wood/Metal Post, Cable Railing Hardware

Decking Railings

Buy on Amazon Find on eBay

[Applications] For 1/8 inch deck cable railing system. It' s suitable for 2"x2" metal and wood posts and applicable for both level and angled sections. Provided a "dead end" for a DIY cable railing project, can be used on all sorts of posts in wood or metal. Perfect for installation on exterior decks, marine rigging, or interior applications. When using invisible cable railing system on a stairway or other angle application, we recommend using 5/16 ID 30 degree angle washer:B0BXD6YDLN.

[Size] : Overall length of the receiver: 1.02", Threaded stud length: 2.17". Min length: 2.57", Max length: 3.02". Drill Hole Size = 0.314". Use with 1/8″ stainless steel wire rope cable. For 1/8 inch cable railing.

[T316 Stainless Steel] : This cable railing hardware was made with T316 stainless steel so you don't have to worry about them rusting over time. Because of their material, you can install them both indoor and outdoor.

[Easy To Install] Invisible cable railing kits work by securing one end of a cable wire within the post. This way, no fasteners are visible to the exterior eye. Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. Stainless Steel Cable: B083X5X3SL.

[Package List] 50 Pack T316 Stainless Steel Invisible Receiver and Swage Stud End. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement.

Read more Read less

BLIKA 100 Pack Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Cable Railing Protector Sleeves

Decking Railings

Buy on Amazon Find on eBay

[Applications] This Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications.

[Material] Cable railing protector sleeve is made of stainless steel T316 marine grade, High tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance.

[Size] Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.48 inch, Required Hole Diameter = 0.258 inch, suitable for 1/8" 5/32" or 3/16" cable railing.

[Feature] This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial.

[Package List] 100 Pcs Stainless Steel Protector Sleeves and A Free Drill Bit. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.

Read more Read less

BLIKA 200 Pack Cable Railing Rubber Grommets for 1/8" 5/32" 3/16" Cables for Metal Cable Railing Posts, 1/8" Cable Railing Grommet, Cable Railing Protective Sleeves for Metal Posts, BL10-L

Decking Railings

Buy on Amazon Find on eBay

[Applications] These cable railing protector sleeves fit for 1/8" 5/32" 3/16" stainless steel cable, preventing any moisture from getting inside a metal post. Preventing the cable from wearing into the metal/composite posts. Cable railing grommets eliminate the direct contact between dissimilar metals, minimizing electrolysis.

[Size] Cable Railing Grommet for 1/8" 5/32" 3/16" cable railing posts. Overall Length of Sleeve = 13/32", Flange Diameter = 21/32". Cable railing kit protector sleeve rubbers fit for most cable railing 2"x2", 4"x4" metal posts, the range of metal posts hole size: 13/32" to 15/32".

[Material] Cable Railing Rubber Grommets are made of a strong rubber, ensuring they will last as long as your stainless cable. It is corrosion-resistant, weather resistance and UV-resistant which makes our balustrade hardware suitable for coastal installation. Cable railing system requires hardly any maintenance.

[Feature] This high quality cable railing rubber grommets is built to withstand extreme coastal and corrosive environments. Cable railing protector sleeves for metal or aluminum Posts. Easy to install, whether used indoors or outdoors, residential or commercial.

[Package List] 200 Pcs Rubber Grommets for 1/8" 5/32" 3/16" Cable. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.

Read more Read less

BLIKA 120 Pack T316 Stainless Steel Black Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

Decking Railings

Buy on Amazon Find on eBay

[Applications] Black swage lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections, you can create a sleek, moden look throughout your home. BLIKA high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications. Black cable railing swage lag screws perfect for planning your DIY cable railing project, staircases, balconies and decking areas.

[Size] Black cable railing swage lag screw is suitable for 2"x2", 4"x4", 6"x6" wood posts. Thread Length = 2", Thread Diameter = 1/4", Hole Size = 1/8", Overall Length = 4", Hole Depth = 1.57", Pull Out= 580kg. BLIKA black swage lag screws are compatible with other brands' 1/8 inch stainless cable and cable railing kit. Left & Right handed thread swage lag screws rotate in the same direction to tighten the cable without twisting or damaging the cable.

[T316 Stainless Steel] Black cable railing kit is made of marine grade T316 stainless steel, black oxidized coating offers additional corrosion resistance, wear resistance and weather protection which make our balustrade hardware suitable for coastal installations. this swage lag screw system kit will not flake off over time. Black cable railing system requires hardly any maintenance.

[Easy to Install] The black deck railing swage lag screws can adjust the cable tension by screwing the threaded end into wood post, be careful not to tension your cable railing too much. The included reinforced wrenches make the work easier. It is recommended you use two people for installation of this system. These swage lag screws require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & cable cutter: B083Z5JQJ9. Please watch our installation video or installation guidance.

[Package List] 60 x Black swage lag screws left+ 60 x Black swage lag screws right + 2 x Spanner Multi Tool + 2 Free Drill Bit +User Manual. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us. We are committed to all after-sales, so that buyers can better obtain satisfactory service.

Read more Read less

BLIKA 10 Pair 1/8" Black Cable Railing Kit Swage Toggle Turnbuckle Hardware, Adjustable Angle T316 Stainless Steel Cable Railing Kits for 2"x2", 4"x4" Wood Posts, Black Deck Railing Kit for Stairs

Decking Railings

Buy on Amazon Find on eBay

[Application] Black stair cable railing kits fit for 1/8'' stainless steel cable. This black adjustable angle cable railing kit has 180° angle freedom adjustable base, can be used at angle stair railing or horizontal cable guardrail. Black cable railing hardware is suitable for outdoor or indoor.

[T316 Stainless Steel] Black cable railing hardware is made with T316 stainless steel so you don't have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Cable railing Tensioner kit can be used with wood posts.

[Size] Black Turnbuckle = 7 9/32"(Min) - 10"(Max) , Black Deck Toggle End = 3", T316 stainless steel screws = 1 7/8". Suitable for 1/8″ stainless steel wire rope cable. If using the black toggle turnbuckle, lengthen the black turnbuckle to allow cable tightening once installed.

[Easy To Install] These black swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. The spanner multi tool feature tightening jaws specifically for Lag Screws, Swage Studs and Turnbuckles. Insert one mini screwdriver into the center hole of the turnbuckle. Use the wrench to prevent cable from spinning.

[Package List] 10 Pairs T316 Black Stainless Steel Toggle Turnbuckles & Ends, 1 x Spanner Multi Tool. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.

Read more Read less

BLIKA 36" Cable Railing Corner Post(Post 35"x2"x2"), 3-Side Drilled Flat Top Surface Mount Corner Post, Stainless Steel Black Handrail Corner Post for Cable Railing Kits, BL05-CP

Decking Railings

Buy on Amazon Find on eBay

[Application] Engineered for 90° corner mounting, our compact 3-side pre-drilled design eliminates the need for bulky dual-post systems. Each post comes drilled on three sides. This corner drilled post can serve as either structural end posts within level corner sections or stair corner sections of the railing. The square steel cable corner post fits perfectly with our 6'6" stainless steel cable handrail(BLIKA BL01-T) and other cable post hardware kit, creating a clean and sleek black cable railing system for you.

[Material] Our black matte powder-coated corner post is made of premium 304 stainless steel, having superior strength, corrosion resistance and impact resistance. The cable railing grommets are designed to prevent the cable from wearing into the metal posts, providing stable support for the cable handrail system. Compatible with 1/8", 5/32", 3/16" wire rope, our deck railing corner post is ideal for indoor and outdoor applications like decks, stairs, porches, balconies, and more.

[Railing Building Code] BLIKA cable railing post is drilled with holes 3" center-to-center, to avoid any deflection exceeding 4 inches, compliant with 4” Sphere Rule. For optimum safety and performance, the span between two structural posts should not exceed 4ft. If the span between two structural posts is increased to 7ft, you'll need a structural post every 8ft with intermediate spacing every 4ft between structural posts. Please consult the local building authorities about the regulations.

[Beginner Friendly] BLIKA black corner post is beginner friendly, you can follow the steps in the detailed installation. Our attached cable railing rubber grommets have a pre-opening design which can be put directly into the holes of the cable post. Our flat top bracket features a hassle-free installation, seamlessly attaching to flat handrails for a perfect fit. It's designed to save you time and effort, making your cable railing system setup both quick and rock-solid. To complete your deck cable railing project, we offer matching level cable posts: BLIKA BL02-LP and black cable railing kits: B0C77L8G9G.

[Package List] BLIKA 36" Fixed Top Cable Railing Corner Post Kit includes: 1x 304 stainless steel fixed flat top bracket corner post + 1x allen wrench+ 1 x open end wrench +1 x hex socket for wood screw+ 4 x 16mm self-drilling screws for wood/composite handrails + 4 x lag screws for wood floor+ 4x expansion screws for concrete floor + 25 x rubber grommets. BLIKA is committed to providing premium and affordable products for your cable railing project. If you are not satisfied with your purchase, please feel free to contact us.

Read more Read less

BLIKA 50 Pack 3/16" Invisible Cable Railing kit, T316 Stainless Steel Invisible Receiver and Swage Stud End for 3/16 Inch Cable Railing, Deck Stair Threaded End Fitting for 2"x2" Wood & Metal Posts

Decking Railings

Buy on Amazon Find on eBay

[APPLICATIONS] For 3/16 inch deck cable railing system. Invisible cable railing tensioner is suitable for 2"x2" wood /metal Posts, level & angle installation. An in-line system of minimal visual impact with no bulky turnbuckles to impede views. Perfect for installation on exterior decks, marine rigging, or interior applications. When using invisible cable railing system on a stairway or other angle application, we recommend using 5/16 ID 30 degree angle washer:B0BXD6YDLN.

[T316 STAINLESS STELL] This cable railing hardware was made with T316 stainless steel so you don't have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Use with metal or wood posts. Suitable for outdoor or indoor.

[SIZE] Overall length of the receiver: 1.02", Threaded stud length: 2.12", Min length: 2.58", Max length: 3.01". Drill Hole Size = 0.316". Use with 3/16″ stainless steel wire rope cable. 3/16 inch T304 Stainless Steel Cable: B0CW1CXXFT. 3/16 inch T316 Stainless Steel Cable: B0D93L8M6N. BLIKA invisible cable tensioners are compatible with other brands' 3/16 inch stainless cable and cable railing kit.

[EASY TO INSTALL] Invisible cable railing kits work by securing one end of a cable wire within the post. This way, no fasteners are visible to the exterior eye. Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and concise appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9.

[PACKAGE LIST] 50 Pack T316 Stainless Steel Invisible Receiver and Swage Stud End. If you're not satisfied with this item at any time within one month of purchase, we'll provide a replacement. If you have any issues about our product, please kindly feel free to contact us.

Read more Read less

BLIKA 500FT 1/8" Stainless Steel Cable, T316 Marine Grade, Stainless Steel Wire Rope 7x7 Strands Construction, 1850lbs Breaking Strength Aircraft Cable for Deck Cable Railing, DIY Balustrades

Decking Railings

Buy on Amazon Find on eBay

[Applications] Perfect for planning your own cable railing project, easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial. Cable railing system requires hardly any maintenance.

[Size] Our wire rope delivers the true 1/8-inch standard (3.18mm) with a rated breaking strength of 1850 pounds. Built with a 7x7 semi-flexible construction, it is polished to a smooth, burr-free finish and neatly coiled for reliable performance. Unlike undersized 3mm substitutes offered by others, our cable is engineered to hold its form after cutting. For the precise size, assured strength, and lasting quality you require, choose BLIKA.

[T316 Stainless Steel] Marine Grade T316 Stainless Steel, strong corrosion resistance, wear resistance, weather protection, suitable for traction, pulling, strapping, landscape and architectural use, DIY deck cable railing Balustrade handrail systems. It is suitable for coastal installations.

[Easy To Install] Stainless steel cable is suitable for most applications including shade structures, shade umbrellas and sail, wire balustrades, architectural rigging and green-walls or stainless steel wire balustrade. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. 10 Ton Black Hydraulic Crimper Tool: B0BWGTZ9WL.

[Package List] 1 x 500 Feet 1/8Inch Stainless Cable. Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. If you have any issues about our product, please kindly feel free to contact us. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement.

Read more Read less

BLIKA 20 Pack 5/16" ID Angle Washers for Cable Railing Posts, Stainless Steel 30 Degree Angle Beveled Washer for 1/8", 3/16" Invisible Cable Railing Hardware, Cable Railing Angled Washer

Buy on Amazon Find on eBay

[Applications] 30 Degree angled design can be applied to 25, 30, 35 and 40 degrees stair railing, Angle beveled washers provide a flat bearing surface when attaching fittings at angled stair terminations. This angled washer is perfect for planning your cable railing project, providing beveled washer for the angle of your garden, stairs and aisle beside for indoor or outdoor applications(wood, steel, aluminum post on deck railing).

[Size] A(Inside diameter) = 5/16", B(Outside diameter) = 5/8", Angle = 30 Degree. 30 degree beveled washer fits for 5/16" Threaded Stud Ends (1/8" & 3/16" Cable Railing Kit).

[Material] The angle stair washer is made of Stainless Steel T316 Marine Grade, high tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance.

[Easy to Install] This angle beveled washer is compatible with 1/8" Invisible Receiver and Swage Stud Ends(B0B6BMV8C3, B07V66XZRV, B0BRK9924X) and 3/16" Invisible Receiver and Swage Stud Ends(B0BDKGJYW3, B07VTKHWCJ).

[Package List] 20 Pack 5/16 inch 30 Degree Angle Beveled Washer. If you have any issues about our product, please kindly feel free to contact us. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement.

Read more Read less

BLIKA 60 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

Buy on Amazon Find on eBay

[Applications] Swage lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections. BLIKA high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications. Cable railing swage lag screws perfect for planning your DIY cable railing project, staircases, balconies and decking areas. Get the job done effortlessly with our extra-thick wrench—built to outlast others.

[Size] Cable railing hardware for 2"x2", 4"x4", 6"x6" wood posts. Thread Length = 2", Thread Diameter = 1/4", Hole Size = 1/8", Overall Length = 4", Hole Depth = 1.57", Pull Out= 580kg. Blika swage lag screws are compatible with other brands' 1/8 inch stainless cable and cable railing kit. Left & Right handed thread swage lag screws rotate in the same direction to tighten the cable without twisting or damaging the cable.

[T316 Stainless Steel] Deck wire railing kits is made of stainless steel T316 marine grade. High tensile strength and anti-fatigue strength weatherproof, super strong resistance to rust and corrosion which make our balustrade hardware suitable for coastal installations. BLIKA cable railing system requires hardly any maintenance.

[Easy to Install] The deck railing swage lag screws can adjust the cable tension by screwing the threaded end into wood post, be careful not to tension your cable railing too much. The included reinforced wrenches make the work easier. It is recommended you use two people for installation of this system. These swage lag screws require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & cable cutter: B083Z5JQJ9. Please watch our installation video or installation guidance.

[Package List] 30 x Swage lag screws left+ 30 x Swage lag screws right + 2 x Spanner Multi Tool + 2 Free Drill Bit + User Manual. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us. We are committed to all after-sales, so that buyers can better obtain satisfactory service.

Read more Read less

BLIKA 1 Pack 6'6'' Stainless Steel Cable Railing Handrail, Black Rectangular Handrail Flat Top Rail with End Caps for Deck Stair Cable Railing System, Deck Stair Hand Rails for Indoor/Outdoor, BL01-T

Decking Railings

Buy on Amazon Find on eBay

[Application] This cable railing handrail is designed with a square tube, has a secure grip and reliable support whether used in various locations. BLIKA metal handrail can use with handrail bracket to get a stair wall handrail or with wood and metal cable railing post to get a step handrail, deck railing, stair railing, porch and more. The 6'6" stainless steel handrail fits perfectly with our square steel cable railing posts(BLIKA BL02, BL01) and other cable post hardware kits, creating a clean and sleek black cable railing system for you.

[304 Stainless Steel] Our black matte powder coated cable railing handrail is made of 304 stainless steel, which has great durability, corrosion resistance and deformation resistance. The handrail end cap is made of POM nylon plastic, having great weather resistance and compression resistance. These features ensure that your railing system is strong and durable, making the rectangular handrails with end caps ideal for both outdoor and indoor railing systems.

[Size] Handrail total length: 6'6'' width: 2.36", height: 1.18", with a sturdy 1.5mm thickness. This steel handrail can usually connect 3 posts. Too long? Cut with a circular saw. Too short? Extend with BLIKA BL03 handrail connectors. Get your cable railing kit at BLIKA Store, with multiple fitting options for seamless installation. BLIKA stainless steel handrail is also compatible with other brands' cable railing posts.

[Easy Installation] BLIKA black rectangular handrail has a simple and convenient design for installation. We just need to mark the hole positions and drill on the handrail, then use screws to tighten the flat top bracket of the posts to our handrail (As shown in Figure 4). This stainless steel cable handrail can be installed on stair railing posts and cable railing posts, its black matte powder coated design can give you an elaborate and stylish cable railing system.

[Package List] 1 Pack 6'6'' Stainless Steel Handrail + 6 Pack POM Nylon End Caps. BLIKA has 36"/42"cable railing posts with adjustable or fixed top and other cable railing kits. If you need different products to match your cable railing system, you can visit our shop for more information. Choose BLIKA – Where premium quality meets effortless shopping. Our high-performance cable railing systems deliver unobstructed views for your deck, combining sleek design with worry-free durability.

Read more Read less

BLIKA 60 Pack 25 30 35 Degree 1/8" Black Cable Railing Angle Beveled Protector Sleeves, T316 Stainless Steel, Angle Protector Sleeves Deck Stair Cable Railing Hardware Kit for Wood Posts

Decking Railings

Buy on Amazon Find on eBay

[Applications] 30 Degree 1/8" black cable railing angled protector sleeves design for installing on wood posts in the middle of 30-degree angled stairs or ramps. This black angled cable railing sleeve is perfect for planning your cable railing project, providing beveled protector sleeves for the angle of your garden, stairs and aisle beside for indoor or outdoor applications.

[Size] Tilt Angle = 30 Degree, Overall Length of Sleeve = 1 1/8", Sleeve Diameter=9/32", Flange Diameter =5/8"(The longest diameter of an ellipse) - 35/64"(The shortest diameter of an ellipse). 25 30 35 Degree black angled protector sleeves suitable for 1/8" stair cable railing system.

[T316 Stainless Steel] BLIKA angle protector sleeve is made of marine grade T316 stainless steel, black oxidized coating offers additional corrosion resistance, wear resistance and weather protection, this cable railing protector sleeve will not flake off over time. Black cable railing system requires hardly any maintenance. This 30 Degree 1/8" black wood post protector is suitable for outdoor or indoor.

[Easy To Use] This black stainless steel 30 degree 1/8" angled post protector can be used on wood/composite posts to prevent the cable from wearing into the wood. Use this fitting to cleanly finish drilled holes on intermediate angled posts on stairways and ramps. Often used in conjunction with black straight wood post protector, ASIN: B0C582HXHZ, ASIN: B0CDP5Z16R.

[Package List] 60 Pack 30 Degree 1/8" black deck railing angle beveled protector sleeves and a free drill bit. Choose BLIKA – Where premium quality meets effortless shopping. Our high-performance cable railing systems deliver unobstructed views for your deck, combining sleek design with worry-free durability. Experience the BLIKA difference: superior products backed by seamless customer care.

Read more Read less

BLIKA 40 Pack Black Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Black Cable Railing Protector Sleeves

Decking Railings

Buy on Amazon Find on eBay

[Applications] This Black Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications.

[Material] Black cable railing protector sleeve is made of stainless steel T316 marine grade, black oxidized coating offers additional corrosion resistance, wear resistance and weather protection, this wire will not flake off over time. High tensile strength and anti-fatigue. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Black cable railing system requires hardly any maintenance.

[Size] Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.48 inch, Required Hole Diameter = 0.258 inch, black cable railing protector sleeves are suitable for 1/8" 5/32" or 3/16" cable railing.

[Feature] This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Black stainless steel protector sleeve is easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial.

[Package List] 40 Pcs Black Stainless Steel Protector Sleeves and A Free Drill Bit. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.

Read more Read less

BLIKA 100 Pack Black Stainless Steel Protector Sleeves for 1/8" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Black Cable Railing Protector Sleeves

Decking Railings

Buy on Amazon Find on eBay

[Applications] This Black Stainless Steel Protector Sleeves for 1/8" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications. By incorporating black stainless steel cable railing into interior staircases or balconies, you can create a sleek, moden look throughout your home.

[Material] Black cable railing protector sleeve is made of stainless steel T316 marine grade, black pvd coating offers additional corrosion resistance, wear resistance and weather protection, this cable railing sleeves will not flake off over time. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Black cable railing system requires hardly any maintenance.

[Size] The black stainless protector sleeve is suitable for 1/8" deck cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.474 inch, flange size is bigger and fitter than others, Required Hole Diameter = 0.251 inch. Black stainless steel cable with cutter: B0DSBGTJNJ. Black stainless steel cable: B0CMTDLF1H.

[Feature] This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Black stainless steel protector sleeve is easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial.

[Package List] 100 Pcs 1/8" Black Stainless Steel Protector Sleeves and A Free Drill Bit. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.

Read more Read less

BLIKA 10 Pack 1/8" Black Stainless Steel Invisible Receiver and Swage Stud End for Cable Railing, Deck Stair Threaded End Fitting for Wood & Metal Post, Black Cable Railing Hardware

Decking Railings

Buy on Amazon Find on eBay

[Applications] For 1/8 inch deck cable railing system. Invisible cable railing tensioner is suitable for 2"x2" wood /metal Posts, level & angle installation. An in-line system of minimal visual impact with no bulky turnbuckles to impede views. Perfect for installation on exterior decks, marine rigging, or interior applications. When using invisible cable railing system on a stairway or other angle application, we recommend using 5/16 ID 30 degree black angle washer:B0CM2WZVYQ.

[T316 Stainless Steel+Black Oxidized Finish] Black cable railing tensioner is made of marine grade T316 stainless steel, black oxidized coating offers additional corrosion resistance, wear resistance and weather protection, this kit will not flake off over time. Our sleek black deck railing kit is designed for ultimate versatility, seamlessly integrating with both metal and wood posts for a clean, modern look. Weather-resistant, low-maintenance, and perfect for any setting, they combine style and functionality to elevate your home's aesthetic.

[Size] Black invisible cable railing kits fit for 1/8 inch stainless steel wire rope cable. Overall length of the receiver: 1.02", Threaded stud length: 2.17", Thread: 1/4-20. Min length: 2.57", Max length: 3.01". Black stainless steel cable: B0DSBGTJNJ. BLIKA black invisible cable tensioners are compatible with other brands' 1/8 inch stainless cable and cable railing kit.

[Easy To Install] Our invisible cable railing kits are engineered with a sleek, hidden fastening system that secures the cable wire directly into the post, creating a clean, minimalist look with no visible hardware. The Invisible Receiver, featuring a hexagon socket, ensures easy installation. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & Cable Cutter: B083Z5JQJ9.

[Package List] 10 Pack T316 Black Stainless Steel 1/8" Invisible Receiver and Swage Stud Ends. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. We provide professional tool makes your cable railing installation job easier.

Read more Read less

BLIKA

BLIKA Best Sellers

BLIKA 100 Pack T316 Stainless Steel Black Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA Complete Set 36" Stair Railing Post Kit(Post 35"x2"x2"), Black 25-35° Angle Drilled Line Post, Invisible Cable Railing System Kit Include 4Pack Stair Posts, 1/8" Stainless Cable(No Handrail)

BLIKA 10 Ton Hydraulic Crimping Tool and Cable Cutter, Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 11 Dies, Wire Swaging Tool for 1/8" to 3/16" Cable Railing Hardware

BLIKA 36" Level Drilled Cable Railing Post(Post 35"x2"x2"), Flat Top Surface Mount Deck Post, Stainless Steel Black Powder Coated Finish Cable Handrail Post for Deck Railing, BL02-LP

BLIKA 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA 50 Pack Invisible Cable Railing kit, T316 Stainless Steel 1/8" Invisible Receiver and Swage Stud End for Cable Railing, Swage Tensioner 1/8" for Wood/Metal Post, Cable Railing Hardware

BLIKA 100 Pack Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Cable Railing Protector Sleeves

BLIKA 200 Pack Cable Railing Rubber Grommets for 1/8" 5/32" 3/16" Cables for Metal Cable Railing Posts, 1/8" Cable Railing Grommet, Cable Railing Protective Sleeves for Metal Posts, BL10-L

BLIKA 120 Pack T316 Stainless Steel Black Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA 10 Pair 1/8" Black Cable Railing Kit Swage Toggle Turnbuckle Hardware, Adjustable Angle T316 Stainless Steel Cable Railing Kits for 2"x2", 4"x4" Wood Posts, Black Deck Railing Kit for Stairs

BLIKA 36" Cable Railing Corner Post(Post 35"x2"x2"), 3-Side Drilled Flat Top Surface Mount Corner Post, Stainless Steel Black Handrail Corner Post for Cable Railing Kits, BL05-CP

BLIKA 50 Pack 3/16" Invisible Cable Railing kit, T316 Stainless Steel Invisible Receiver and Swage Stud End for 3/16 Inch Cable Railing, Deck Stair Threaded End Fitting for 2"x2" Wood & Metal Posts

BLIKA 500FT 1/8" Stainless Steel Cable, T316 Marine Grade, Stainless Steel Wire Rope 7x7 Strands Construction, 1850lbs Breaking Strength Aircraft Cable for Deck Cable Railing, DIY Balustrades

BLIKA 20 Pack 5/16" ID Angle Washers for Cable Railing Posts, Stainless Steel 30 Degree Angle Beveled Washer for 1/8", 3/16" Invisible Cable Railing Hardware, Cable Railing Angled Washer

BLIKA 60 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA 1 Pack 6'6'' Stainless Steel Cable Railing Handrail, Black Rectangular Handrail Flat Top Rail with End Caps for Deck Stair Cable Railing System, Deck Stair Hand Rails for Indoor/Outdoor, BL01-T

BLIKA 60 Pack 25 30 35 Degree 1/8" Black Cable Railing Angle Beveled Protector Sleeves, T316 Stainless Steel, Angle Protector Sleeves Deck Stair Cable Railing Hardware Kit for Wood Posts

BLIKA 40 Pack Black Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Black Cable Railing Protector Sleeves

BLIKA 100 Pack Black Stainless Steel Protector Sleeves for 1/8" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Black Cable Railing Protector Sleeves

BLIKA 10 Pack 1/8" Black Stainless Steel Invisible Receiver and Swage Stud End for Cable Railing, Deck Stair Threaded End Fitting for Wood & Metal Post, Black Cable Railing Hardware

BLIKA FAQs

BLIKA

BLIKA Best Sellers

BLIKA 100 Pack T316 Stainless Steel Black Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA Complete Set 36" Stair Railing Post Kit(Post 35"x2"x2"), Black 25-35° Angle Drilled Line Post, Invisible Cable Railing System Kit Include 4Pack Stair Posts, 1/8" Stainless Cable(No Handrail)

BLIKA 10 Ton Hydraulic Crimping Tool and Cable Cutter, Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 11 Dies, Wire Swaging Tool for 1/8" to 3/16" Cable Railing Hardware

BLIKA 36" Level Drilled Cable Railing Post(Post 35"x2"x2"), Flat Top Surface Mount Deck Post, Stainless Steel Black Powder Coated Finish Cable Handrail Post for Deck Railing, BL02-LP

BLIKA 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA 50 Pack Invisible Cable Railing kit, T316 Stainless Steel 1/8" Invisible Receiver and Swage Stud End for Cable Railing, Swage Tensioner 1/8" for Wood/Metal Post, Cable Railing Hardware

BLIKA 100 Pack Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Cable Railing Protector Sleeves

BLIKA 200 Pack Cable Railing Rubber Grommets for 1/8" 5/32" 3/16" Cables for Metal Cable Railing Posts, 1/8" Cable Railing Grommet, Cable Railing Protective Sleeves for Metal Posts, BL10-L

BLIKA 120 Pack T316 Stainless Steel Black Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA 10 Pair 1/8" Black Cable Railing Kit Swage Toggle Turnbuckle Hardware, Adjustable Angle T316 Stainless Steel Cable Railing Kits for 2"x2", 4"x4" Wood Posts, Black Deck Railing Kit for Stairs

BLIKA 36" Cable Railing Corner Post(Post 35"x2"x2"), 3-Side Drilled Flat Top Surface Mount Corner Post, Stainless Steel Black Handrail Corner Post for Cable Railing Kits, BL05-CP

BLIKA 50 Pack 3/16" Invisible Cable Railing kit, T316 Stainless Steel Invisible Receiver and Swage Stud End for 3/16 Inch Cable Railing, Deck Stair Threaded End Fitting for 2"x2" Wood & Metal Posts

BLIKA 500FT 1/8" Stainless Steel Cable, T316 Marine Grade, Stainless Steel Wire Rope 7x7 Strands Construction, 1850lbs Breaking Strength Aircraft Cable for Deck Cable Railing, DIY Balustrades

BLIKA 20 Pack 5/16" ID Angle Washers for Cable Railing Posts, Stainless Steel 30 Degree Angle Beveled Washer for 1/8", 3/16" Invisible Cable Railing Hardware, Cable Railing Angled Washer

BLIKA 60 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Deck Cable Railing Kit, Wire Railing Kit for Decks with Wrench, DIY Wood Baluster

BLIKA 1 Pack 6'6'' Stainless Steel Cable Railing Handrail, Black Rectangular Handrail Flat Top Rail with End Caps for Deck Stair Cable Railing System, Deck Stair Hand Rails for Indoor/Outdoor, BL01-T

BLIKA 60 Pack 25 30 35 Degree 1/8" Black Cable Railing Angle Beveled Protector Sleeves, T316 Stainless Steel, Angle Protector Sleeves Deck Stair Cable Railing Hardware Kit for Wood Posts

BLIKA 40 Pack Black Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Black Cable Railing Protector Sleeves

BLIKA 100 Pack Black Stainless Steel Protector Sleeves for 1/8" Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Black Cable Railing Protector Sleeves

BLIKA 10 Pack 1/8" Black Stainless Steel Invisible Receiver and Swage Stud End for Cable Railing, Deck Stair Threaded End Fitting for Wood & Metal Post, Black Cable Railing Hardware

BLIKA FAQs

Similar Brands