Skip to content
Rack-A-Tiers feature image

Rack-A-Tiers

4.6 Fact checked
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Rack-A-Tiers has 109 products for sale. Rack-A-Tiers products range in price from $12.46 to $154.49, and the average price of all the products is about $48.21.

We found that most of the Rack-A-Tiers products are manufactured by Rack-A-Tiers Mfg.. The manufacturer provides Rack-A-Tiers with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Rack-A-Tiers products from the seller Rack-A-Tiers. The brand holds an average rating of 4.6, testifying to its excellent reputation.

Share

Rack-A-Tiers Best Sellers

Last Updated: Jan 9, 2026

Cord Reels

Rack-A-Tiers XL Multi-Purpose Cable Dispenser - Award Winning Electrical Wire Rack, Wire Spool Caddy (11470)

Rack-A-Tiers XL Multi-Purpose Cable Dispenser - Award Winning Electrical Wire Rack, Wire Spool Caddy (11470) Cover
  • Fits wire reels up to 40” (1 m).
  • Rated for wire reels weighing up to 500 lbs. (226 kg).
  • Made in the USA.
Buy on Amazon Find on eBay
Cord Reels

Rack-A-Tiers Wire Dispenser - Electrician's Wire Spool Rack, Multi-Purpose Cable Dispenser, Wire Spool Dispenser (2.0)

Rack-A-Tiers Wire Dispenser - Electrician's Wire Spool Rack, Multi-Purpose Cable Dispenser, Wire Spool Dispenser (2.0) Cover
  • DISPENSE WIRE – Rack-A-Tiers are the quickest and easiest wire spool rack to set up. This wire dispenser has 5 holes, 3 handles, and two ‘V' notches for supporting wire reels of varied sizes and weights. It's an electrician tool that you'll want to have with you on every job site.
  • SAWHORSE – With the two halves of the Rack-A-Tiers placed apart you can use them to support lumber or conduit for cutting. Able to be screwed into the floor for increased stability, this wire dispenser excels as a sawhorse.
  • PIPE VISE – The Rack-A-Tiers cable dispenser has two ‘V' notches that serve as a great ‘pipe vise' for conduit, steel studs, mouldings, angle iron, strut, and other irregularly shaped materials. By combining a wire spool dispenser and a pipe vise into one tool, you can enhance your work speed and efficiency.
Buy on Amazon Find on eBay
Tool Bags

Rack-A-Tiers Dirt Bag Electrical drilling catcher bag for Magnetic metal shavings, Non-Conductive Electrical Safety Drilling Tool Bag, 5X5X4 (84000)

Rack-A-Tiers Dirt Bag Electrical drilling catcher bag for Magnetic metal shavings, Non-Conductive Electrical Safety Drilling Tool Bag, 5X5X4 (84000) Cover
  • Frame measurements: 5″ x 5″ OD (Outside Diameter) – 3 7/8″ x 3 7/8″ ID (Inside Diameter).
  • Outer bag: Latex leather, Inner bag: Fiberglass cloth, Plastic frame: ABS.
  • Anti-static liner.
Buy on Amazon Find on eBay
Twist Drill Bits Hex-Shank Drill Bits

Rack-A-Tiers Allen Head Driver Bit Kit with Holder, Allen Bits for Lug Termination, Installations, & Electrical Work, Electrical Drill Bits, Quick-Change Allen Bits (72607)

Rack-A-Tiers Allen Head Driver Bit Kit with Holder, Allen Bits for Lug Termination, Installations, & Electrical Work, Electrical Drill Bits, Quick-Change Allen Bits (72607) Cover
  • Industrial grade bits. Extremely durable
  • 1/4″ hex shank
  • Quick connect design
Buy on Amazon Find on eBay
Electrical Boxes

Rack-A-Tiers Open Splice Junction Box (5 Pack) (UL Listed), One-Piece Junction Box Splice Box. 5 Second Installation (JB400.p5)

Rack-A-Tiers Open Splice Junction Box (5 Pack) (UL Listed), One-Piece Junction Box Splice Box. 5 Second Installation (JB400.p5) Cover
  • 25.8 Cubic inches of volume.
  • No need to disconnect the wiring.
  • Slots for wiring on four sides of the junction box.
Buy on Amazon Find on eBay
Electrical Wire

Rack-A-Tiers Wire Dispenser - Electrician's Wire Spool Rack, Multi-Purpose Cable Dispenser, Award Winning Electrical Wire Rack, Wire Spool Dispenser, Wire Reel Caddy (11455)

Rack-A-Tiers Wire Dispenser - Electrician's Wire Spool Rack, Multi-Purpose Cable Dispenser, Award Winning Electrical Wire Rack, Wire Spool Dispenser, Wire Reel Caddy (11455) Cover
  • Fits wire reels up to 34” (0.9m).
  • Rated for wire reels weighing up to 300 lbs. (150 kg).
  • Five 1 ¾” holes to accommodate different wire reel sizes. Several reels can be accommodated at the same time across multiple pieces of conduit.
Buy on Amazon Find on eBay
Electrical Wire

Rack-A-Tiers Mark My Wire - 4 Pack (Black, Blue, Red & White - 1 Each), Wire Marker, Wire Phase Marker, Electrical Marker (52484)

Rack-A-Tiers Mark My Wire - 4 Pack (Black, Blue, Red & White - 1 Each), Wire Marker, Wire Phase Marker, Electrical Marker (52484) Cover
  • SAVE TIME – The convenient hole lets you thread your wire through the marker's tip. This makes wire reidentification a breeze as you mark the entire wire in seconds with one smooth motion. No more tedious phase taping.
  • LESS MESS – Work clean, organized, and consistent. The hole and notch system gives you more control over the marker and wire, preventing paint from covering your fingers or other wires. This wire marker also produces cleaner looking results than tape and in less time.
  • PORTABLE – Easily able to fit in a tool pouch or bag, this electrical wire marker takes care of all your wire re-colouring needs without taking up too much space.
Buy on Amazon Find on eBay
Electrical Wire

Rack-A-Tiers Wire Tub - Coil Wire Dispenser, Dispense & Rewind Wire Coils, 360° Wire Dispensing, Spinning Electrical Wire Dispenser, No Setup Needed (18455)

Rack-A-Tiers Wire Tub - Coil Wire Dispenser, Dispense & Rewind Wire Coils, 360° Wire Dispensing, Spinning Electrical Wire Dispenser, No Setup Needed (18455) Cover
  • DURABLE – Wire Tub is made of the same durable material as our Rack-A-Tiers Wire Dispenser, high-density polyethylene structural foam. Electricians everywhere know how reliable and long-lasting Rack-A-Tiers tools are.
  • 360° WIRE PULLING – Effortlessly dispense cable in all directions without manual adjustment. Other wire dispensers need to be turned to pull wire at different angles. Wire Tub saves you time and energy.
  • EASY SETUP – With Wire Tub you can start pulling wire in seconds. You don't need to mount or hang this coil dispenser. Place it on the ground, load your coil onto the spinning plate, and start working.
Buy on Amazon Find on eBay
Hand Staplers & Tackers

Rack-A-Tiers Staple Shark - Multi-Purpose Staple Puller, Electrical Wire Staple Remover (52455)

Rack-A-Tiers Staple Shark - Multi-Purpose Staple Puller, Electrical Wire Staple Remover (52455) Cover
  • Made of hardened steel.
  • Nail puller, pry bar, ruler, electrical staple holder, and carpenter square.
  • FUNCTIONAL – The most versatile staple puller available, Staple Shark can remove S1, S2, S3, and S4 staples, as well as “nail on” staples and cable straps without any adjustments. Not limited to cable staples, you can remove other construction staples such as carpet staples and flooring staples.
Buy on Amazon Find on eBay
Screwdriver Bit Sets

Rack-A-Tiers Rough-In Bit Kit - 7 piece Electrician's Robertson Driver Bit Set, double ended impact driver bits, 4 inch and 6 inch (Rough-In Kit) (72711)

Rack-A-Tiers Rough-In Bit Kit - 7 piece Electrician's Robertson Driver Bit Set, double ended impact driver bits, 4 inch and 6 inch (Rough-In Kit) (72711) Cover
  • 4” – #1 Green/#2 Red Robertson Square Double-Ended Impact
  • 6” – #1 Green /#2 Red Robertson Square Double-Ended Impact
  • 4” – #2 Blue Phillips/#2 Red Robertson Square Double-Ended Impact
Buy on Amazon Find on eBay
Electrical Brackets

Rack-A-Tiers Mfg | Cable Chase 10 Pack – Wire Bracket CC9024.P10

Rack-A-Tiers Mfg | Cable Chase 10 Pack – Wire Bracket CC9024.P10 Cover
  • Main Body: 2 1/2 “ x 6 3/8“, Plate: 1 1/8“ x 6 3/8” Hole Diameter: 1”
  • Conforms to UL STD 2239, Certified to CSA STD C22.2 No. 18.4, Accepted by IEAI
  • Follows the same guidelines as typical wire fill calculation
Buy on Amazon Find on eBay
Drill Bits

Rack-A-Tiers Chip Catcher - Magnetic Metal Drill Chip Collector, Metal Shavings Catcher, Metal Drill Shaving Catcher for Electrical Panels (84100)

Rack-A-Tiers Chip Catcher - Magnetic Metal Drill Chip Collector, Metal Shavings Catcher, Metal Drill Shaving Catcher for Electrical Panels (84100) Cover
  • Can be used while drilling holes up to 3/8” in size
  • Inside diameter of the larger hole is 2”
  • LESS MESS – The Chip Catcher not only makes collecting metal shavings simple, but also takes the hassle out of disposal. No more trying to vacuum the metal chips and hoping to get them all. It would normally be difficult to clean metal shavings off a magnet, but the Chip Catcher has a separate plastic sheath between the magnet and the metal chips. Removing the metal shavings can be done in seconds, simply slide the inner piece away from the magnetic outer shell and the shavings fall off.
Buy on Amazon Find on eBay
Cabinet Pulls

Rack-A-Tiers PulLee - Steel Wire Pulling Roller, Electrical Wire Pulling Tool, 4x4 Wire Pulling Guide, Steel Wire Roller for 4" Electrical Box (41100)

Rack-A-Tiers PulLee - Steel Wire Pulling Roller, Electrical Wire Pulling Tool, 4x4 Wire Pulling Guide, Steel Wire Roller for 4" Electrical Box (41100) Cover
  • Spring loaded tips keep it locked in place.
  • Stainless steel design for maximum strength.
Buy on Amazon Find on eBay
Pipe Clamp Tools

Rack-A-Tiers Clip Whacker - Magnetic Beam Clamp Tool, Flange Clip Holder, Electrician Flange Tool, Beam Clip Whacker (54100)

Rack-A-Tiers Clip Whacker - Magnetic Beam Clamp Tool, Flange Clip Holder, Electrician Flange Tool, Beam Clip Whacker (54100) Cover
  • Fits all sizes of flange: 1/8”-1/4”, 5/16”-1/2” and 9/16”-3/4”
  • Similar size to a screwdriver – doesn't take up much space in a tool bag
  • Built in magnet to help hold the clip
Buy on Amazon Find on eBay
Wire Strippers

Rack-A-Tiers V-Cutter NMSC & NM Cable Stripper attachment (47010)

Rack-A-Tiers V-Cutter NMSC & NM Cable Stripper attachment (47010) Cover
  • A new NM wire stripper to strip NMSC cable.
  • Romex stripper attachment easily attaches to most wire strippers.
  • NM cable stripper tool strips cable in or out of electrical boxes with action.
Buy on Amazon Find on eBay
Wire Strippers

Rack-A-Tiers Poke-E Perforated Orange Strip for Marking Wire for Rough-in, Industrial, & Commercial Jobs, Hold Wire in Place, Cable Holder for Drywall, Electrical Wire Holder (32050)

Rack-A-Tiers Poke-E Perforated Orange Strip for Marking Wire for Rough-in, Industrial, & Commercial Jobs, Hold Wire in Place, Cable Holder for Drywall, Electrical Wire Holder (32050) Cover
  • Each roll includes 12′ of strap
  • The Poke-E is 1-7/8 in. wide
  • Made in USA
Buy on Amazon Find on eBay
Shim Discs

Rack-A-Tiers Shim My Box Tubes for Electrical Switches & Receptacles Fitting Tight, Electrical Shims, Electric Box Shims, Electrical Spacers (S1203)

Rack-A-Tiers Shim My Box Tubes for Electrical Switches & Receptacles Fitting Tight, Electrical Shims, Electric Box Shims, Electrical Spacers (S1203) Cover
  • 4 electrical shims per pack
  • 9” length electrical spacers tubes for electrical devices
Buy on Amazon Find on eBay
Rebar Cutters & Benders Rebar Cutters

Rack-A-Tiers 77455 Bend-All Knuckle Saver Bend Wires Size, Inside Enclosures-3AWG-500 Centimeter

Rack-A-Tiers 77455 Bend-All Knuckle Saver Bend Wires Size, Inside Enclosures-3AWG-500 Centimeter Cover
  • NO WIRE DAMAGE – Bend-All's dowels have been engineered to grip cables without damaging them. Perfect for those stiff conductors that need some extra force. Save your wire and your hands from damage with this cable bender.
  • DURABLE – Bend-All is made of machined aircraft aluminum so you can be confident it can take anything you throw at it. Aircraft grade aluminum provides increased fracture and fatigue resistance.
  • TIGHT SPACES – Bend-All fits where your hands won't. It's hard to get enough leverage in cramped panels, meters, and cabinets to bend service wire. This electrical wire bender is small but powerful.
Buy on Amazon Find on eBay

Rack-A-Tiers LB Wire Guide, Shoehorn Wire Pulling Guide, for Use with PVC LB Fitting, PVC (42200)

Rack-A-Tiers LB Wire Guide, Shoehorn Wire Pulling Guide, for Use with PVC LB Fitting, PVC (42200) Cover
  • Fits 2” PVC LBs and can be adapted to most 2” metal LBs.
  • WIRE PROTECTION – Without a wire guide, the cable abrasion from pulling wire through an LB fitting can do serious damage. You can trust the LB Wire Guide to help you smoothly feed conduit through fittings. Keep your wire in perfect condition with this ingenious tool!
  • EFFICIENT – LB Wire Guide saves you time and effort by helping you pull wire by yourself. The perfect solution for solo conductor installations in tight spaces, use this LB conduit fitting shoehorn and stop wasting time fighting with stubborn conduit.
Buy on Amazon Find on eBay
Drill Bits Auger Drill Bits

Rack-A-Tiers Bumper Balls - Drill Alignment Tool 1-1/2" and 2" Kit, Drill Bit Ball for Electricians, Flex Bit Bumper Ball, Flex Auger Ball (BB1520)

Rack-A-Tiers Bumper Balls - Drill Alignment Tool 1-1/2" and 2" Kit, Drill Bit Ball for Electricians, Flex Bit Bumper Ball, Flex Auger Ball (BB1520) Cover
  • No more bit walking
  • No more nail hitting
  • No more wall patching
Buy on Amazon Find on eBay

Rack-A-Tiers FAQs