Skip to content
ZYP Coatings feature image

ZYP Coatings

4.8 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, ZYP Coatings has 20 products for sale. ZYP Coatings products range in price from $18 to $575, and the average price of all the products is about $139.42.

We found that most of the ZYP Coatings products are manufactured by ZYP Coatings, Inc.. The manufacturer provides ZYP Coatings with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase ZYP Coatings products from the seller ZYP Coatings, Inc.. The brand holds an average rating of 4.8, testifying to its excellent reputation.

Share

ZYP Coatings Best Sellers

Last Updated: Jan 12, 2025

BN Aerosol Lubricoat, 1 can (13 oz. Aerosol can) - Release Agent, High-Temperature Lubricant

  • Anti-Stick: Molten Al, Mg, & Zn, Hot-Pressing, Glass Forming, Weld Spatter, Braze Stop-Off
  • High-temperature Lubrication: Extrusion, Superplastic Forming, Stops galling, Dry-Film Lubricant (DFL)
  • Ideal Uses: Reducing Friction, Providing Release, Barrier Layer, Art Glass Molds

Maskote Zinc Stop-Off (2 Quart Pack) - Stops galvanizing in unwanted Areas

  • Stops galvanizing in unwanted areas
  • Fast drying, solvent-based
  • Allows both alkaline & acid cleaning after coating

BN Aerosol Lubricoat, 1 case (12 cans)

  • Anti-Stick: Molten Al, Mg, & Zn, Hot-Pressing, Glass Forming, Weld Spatter, Braze Stop-Off
  • High-temperature Lubrication: Extrusion, Superplastic Forming, Stops galling, Dry-Film Lubricant (DFL)
  • Ideal Use: Reducing Friction, Providing Release, Barrier Layer

Boron Nitride Lubricoat Blue®

  • Totally Non-Wetted by Molten Aluminum, Magnesium, Zinc and Their Drosses
  • Anti-stick coating for Molten Metal
  • Protects Ceramics, Metals and Graphite

Boron Nitride (BN) Powder - Ultra High Purity - Grade ZG (1 kg. / 2.2 lb.)

  • 1 kilogram (2.2 pound) bag of cosmetic grade boron nitride
  • Extremely Lubricious, Even in Vacuum
  • High Thermal Conductivity; Low Thermal Expansion; Non-Toxic

Seize-Stop (Contains no Metals; Works to 900 C)

  • Corrosion Inhibiting; Chemical/Oxidation Resistant
  • High Flash Point (>175 C or >350 F) Oil Based
  • Ambient to High-Temperature (900 C or 1652 F) Lubrication/Release

NDB Stop-Off (Abrasion-Resistant, Hard Coating) - Ideal for Heat-Treating & nitriding

  • Abrasion-Resistant, Hard Coating
  • Usable Even for Alloy Steels (8000 series, such as 8160)
  • Many ideal uses -- Fluidized Bed Nitriding; Vacuum, Gas, & Pack Carburizing; Carbonitriding; Salt Bath Treatment

Muy BN - Ultra High Purity h-BN (Hexagonal Boron Nitride) Powder (4 oz Container)

  • Over 99.9% purity h-BN
  • High lubricity: low Coecient-of-Friction (COF) of 0.2
  • Thermally conductive, electrically insulating

BN ThermKote Paste - 30ml Bottle & applicators - Perfect for 3D Printing & Cartridge heaters

  • High thermal conductivity, electrically insulating
  • Not electrically conductive -- compatible with heater cartridge or thermistor
  • Includes 3 applicators that may be used to coat the cartridge heater in 3D printer heat block.

Yttria Stop-Off (1 Pint)

  • Protective coating for crucibles and molds
  • Usable in all atmospheres to over 1000 C (1832 F)
  • Interaction barrier and release layer

Cera Mastic

  • Very wide use-temperature range; up to 1500 C
  • Stable in contact with many refractory materials
  • Smoothly applies and spreads easily; dries in minutes at room temperature

3D CER-Paste ZRP (Quart)

  • Solvent-based formula is easily printed with common, inexpensive 3D printer assemblies
  • No heat required
  • Once dry, printed ceramic pieces can be fired in air up to 1500 C

Boron Nitride Cera Patch (32 oz.) - Non-wetting Repair Material for Molten Aluminum Refractory Materials

  • Utilizes Boron Nitride for best non-wetting and is non-reacting with molten aluminum and its alloys or drosses
  • Expands to fill the damaged areas: does not sinter, shrink or crack with thermal cycling
  • Excellent non-wetting, strength, hardness, and toughness that prevents molten aluminum from reacting or undercutting any coated or filled regions

3D CER-Paste BN - 1 Pint

  • Solvent-based formula is easily printed with common, inexpensive 3D printer assemblies
  • No heat required for printing
  • Once dry, printed ceramic pieces can be bonded at less than 1000 C

Cera Glue GG - bonding Glue for Graphite-to-Graphite or Silicon Carbide Ceramics

  • Specically designed for Graphite-to-Graphite or for SiC-SiC
  • Usable to nearly 1000 C in air
  • Protects Graphite from oxidation

ZYP Coatings FAQs