MakerDoIt

4.5 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, MakerDoIt has 19 products for sale. MakerDoIt products range in price from $5.99 to $22.99, and the average price of all the products is about $13.62. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase MakerDoIt products from the seller Makerdoit. The brand holds an average rating of 4.5, testifying to its excellent reputation.

MakerDoIt Best Sellers

Last Updated: Jan 12, 2025

48P 19T 20T 21T 22T 23T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush Motor by MakerDoIt

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[Durable] Durable metal construction for long-lasting performance.

[More Funny] Provide the option of being able to change your gear ratio for different track conditions.

[] 48P is the pitch of each tooth on the pinion gear and the 19T 20T 21T 22T 23T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.

[3.175mm] The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter.

[Gear Combo Set] Comes with set screws for each pinion gear, the pinion gear combo set also included a screwdriver, easy to install.

MakerDoIt 48P Pinion Gear Set 3.175mm 48 Pitch 24T 25T 26T 27T 28T RC Parts

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[NOTE] Firstly, you can begin with the minimum tooth. Then, upgrade to a bigger tooth, and check the ESC & motor temperatures regularly throughout the run. At last, you can control faster speed while avoiding potential risks such as ESC/motor damage or malfunction caused by overheat.

[Hardened Steel] The RC upgrades pinion gear set are made of quality hardened steel, durable and reusable, enjoy your happy RC racing time.

[48P] 48P is the pitch of each tooth on the pinion gear and the 24T 25T 26T 27T 28T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.

[3.175mm] The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter.

[Gear Combo Set] Comes with set screws for each pinion gear, the pinion gear combo set also included a hex key, easy to install.

Read more Read less

MakerDoIt 32P 5mm Pinion Gear Set 13T 14T 15T 16T 17T with Hex Key for RC

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[Durable] Durable metal construction for long-lasting performance.

[More Funny] Provide the option of being able to change your gear ratio for different track conditions.

[] 32P is the pitch of each tooth on the pinion gear and the 13T 14T 15T 16T 17T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.

[5mm] The pinion gear shaft diameter or bore is 5mm, make sure your RC motor shaft have the same diameter.

[Gear Combo Set] Comes with set screws for each pinion gear, the pinion gear combo set also included a hex key, easy to install.

MakerDoIt XT90 Connector with Solder Point Cover Cap (12pair)

Solder

Buy on Amazon Find on eBay

[No Shrink Tube] Don't worry about unsuccessful soldering that leads insecurely and unbeautifully. With the solder point cover cap to cover the open wire, and make the soldering job look professional, beats all the shrink tubing, you do not have to use shrink tubing to seal off the wire, create a lot better-looking connection.

[Easier to Plug and Unplug] The cover cap give you a little more surface to grab onto when plug/ unplugs the connector.

[Recommend Wire] We recommend you to use 10awg wire to connect the XT90 connectors.

[Easy Solder] The solder terminals are long enough for soldering using a low temp soldering iron. Tip: while soldering having male-female connections in place to keep connectors aligned. You will love the job!

[12Pair] The package included 12 XT90 female connectors and 12 XT90 male connectors, each connector has a solder point cover cap.

Read more Read less

MakerDoIt 48P Pinion Gear Set 16T 17T 18T 19T 3.175mm 48 Pitch Pinion Gear Set 1/10 RC

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[NOTE] Firstly, you can begin with the minimum tooth 48p pinion gear. Then, upgrade to a bigger tooth 48p pinion, and check the ESC & and motor temperatures regularly throughout the run. At last, you can control faster speed while avoiding potential risks such as ESC/motor damage or malfunction caused by overheating.

[Quality Steel 3.175mm Pinion Gear] The 1/10 rc pinion gear set is made of quality steel, durable, and reusable, enjoy your happy RC racing time.

[48P Pinion Gear Set 3.175mm] The 3.175 pinion gear combo has a 3.175mm bore that is suited for a 3.175mm shaft, and is an ideal universal upgrade pinion gear for Traxxas Redcat Tamiya Losi Arrma RC car.

[Different Option] You will like the option of being able to change your gear ratio for different track conditions with 48 pitch pinion gear.

[Package Include] 16T 17T 18T 19T 48dp pinion gear, each pinion gear with a screw, and a hex key.

Read more Read less

MakerDoIt 48P Pinion Gear Set 13T 14T 15T 16T 3.175mm 48 Pitch Pinion Gear Set 1/10 RC

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[Quality Steel 3.175mm Pinion Gear] The 1/10 RC pinion gear set is made of quality steel, durable, and reusable, enjoy your happy RC racing time.

[Different Option] You will like the option of being able to change your gear ratio for different track conditions with a 48 pitch pinion gear.

[Package Include] 13T 14T 15T 16T 48dp pinion gear, each pinion gear with a screw, and a hex key.

Read more Read less

32P Hardened Pinion Gear Set 1/8 inch Hole 17T 18T 19T 20T 21T with Hex Key (Compatible with 0.8 Metric Pitch)

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[Work Smoothly] Good machining made less rough and less noise than other pinions that make them roll smoothly.

[Pitch & Teeth] 32P compatible with 0.8 metric (0.8M) pitch. 32P(32DP) is the pitch of each tooth on the pinion gear and the 17T 18T 19T 20T 21T is the number of teeth on the pinion gear. Please make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.

[Hardened] 32P pinion gear set is of hardened metal construction. Last longer life.

[Free Style] The speed depends on your gear ration. We provide five different teeth pinion gear to make you more choice in gear ration.

[5pcs] The package included 32p 17T 18T 19T 20T 21T pinion gear and a hardened hex key.

MakerDoIt 32P Pinion Gear Set 5mm 32 Pitch 19T 20T 21T 22T RC Parts

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[Hardened Steel] The RC upgrades pinion gear set are made of quality hardened steel, durable and reusable, enjoy your happy RC racing time.

[32P] 32P is the pitch of each tooth on the pinion gear and the 19T 20T 21T 22T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.

[5mm] The pinion gear shaft diameter or bore is 5mm, make sure your RC motor shaft have the same diameter.

[Gear Combo Set] Comes with set screws for each pinion gear, the pinion gear combo set also included a hex key, easy to install.

Read more Read less

MakerDoIt Mod 1 Pinion Gear 5mm 16T 17T 18T 19T Mod1 M1 Pinion Gear 5mm Shaft

Buy on Amazon Find on eBay

[1/8 Scale Pinion Gear] The 1/8 pinion gear set to have a 5mm bore and is suited for a 5mm shaft, is an ideal universal upgrade pinion gear for Traxxas Redcat Tamiya Losi Arrma RC car 5mm pinion.

[Quality Steel] The 5mm pinion gear is made of quality steel, durable, and reusable, enjoy your happy RC racing time.

[Different Option] You will like the option of being able to change your gear ratio for different track conditions. Enjoy your RC life with our 5mm shaft pinion gear.

[Mod 1 Pinion Gear Set] M1 pinion gear set 5mm includes 16t 17t 18t 19t pinion gear, screws, and one hex key. It also includes a 5mm to 3.175mm shaft coupler to make the installation process even more straightforward.

[NOTE] First, you can begin with the minimum tooth mod 1 pinion gear. Then, upgrade to a bigger tooth, and check the ESC & and motor temperatures regularly throughout the run. At last, you can control faster speed while avoiding potential risks such as ESC/motor damage or malfunction caused by overheating.

Read more Read less

T Plug T Connector, Upgrade Version, 15 Female + 15 Males (15pair)

Buy on Amazon Find on eBay

[Work Smoothly] These T plug work fine with each other, also can be used if you already have another brand T plugs installed.

[No Shrink Tube] Protector cap does a good job than heat shrink, no need wrap around the wire, better in help keep the wires from shorting out.

[Upgrade caps] They get rid of the need for using that tiny bit of heat shrink at the back and give you a little more surface to grab onto when disconnecting a battery.

[Inexpensive] The cost is definitely a plus, inexpensive compared to some alternatives.If you have multiple RC cars or drones, that have the same size batteries with different connectors, you can switch the connectors to same T connectors, you can save a lot of money.

[15pair] The package included 15 female connectors and 15 male connectors, each connector has a protector cap.

Read more Read less

5mm 48p Pinion Gear Set 23T 24T 25T 26T 5mm Shaft Bore 48dp Pitch Pinion for RC

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

Mod 1 Pinion Gear 5mm 18T 19T 20T 21T 22T Mod1 M1 Pinion Gear 5mm Shaft

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[NOTE] Start small with the minimum tooth size 5mm pinion gear, then gradually increase to larger tooth sizes 5mm pinion while monitoring the ESC and motor temperatures during operation. By taking these precautions, you can safely increase your speed and avoid potential damage or malfunctions caused by overheating.

[Hardened Steel Mod 1 Pinion Gear] With the RC upgrades 1/8 scale pinion gear made of high-quality hardened steel, you can be sure that your RC racing experience will be both durable and enjoyable. This set is not only strong and durable, but also reusable for long-term use.

[M1] The M1 pitch refers to the distance between each tooth on the m1 pinion gear set 5mm, while the number of teeth on the gear can vary from 18T 19T 20T 21T to 22T pinion gear. To ensure proper gear meshing, it's crucial that the pitch of m1 pinion gear matches the pitch of your spur gear.

[5mm Shaft Pinion Gear] The 5mm pinion gear mod 1 shaft has a diameter or bore of 5mm, so it's crucial to ensure that your RC motor shaft is also 5mm to ensure compatibility between the two pinion gear.

[Mod 1 Pinion Gear Set] The 5mm pinion gear set combo includes 18 tooth 19 tooth 20 tooth 21 tooth 22 tooth pinion gear with set screws and a hex key for easy installation. Additionally, it comes with a 5mm to 3.175mm shaft coupler for added convenience.

Read more Read less

XT60 Connectors Female Male with 12awg 5.9inch Wire Functional Wire Cover ( 3 Fmale + 3 Male )

Buy on Amazon Find on eBay

[Upgrade] It is really upgrade compared to the standard design, easily remove the grey cover, easily handling significant current without the problems caused by screw-on terminals. Soldered leads to ensure reliable contact. Tight-fitting connector, are able to be connected/ disconnected easily.

[Functional Wire Cover] Do not worry about unsuccessful soldering that leads insecurely and unbeautifully. With the gray functional wire cover to cover the open wire, and make the soldering job look professional, beats all the shrink tubing, you do not have to use shrink tubing to seal off the wire, create a lot better-looking connection. It also gives more to hold when plug/ unplugs the connector.

[Pre-tinned Ends] The attached wire is heavy gauge & pre-tinned at the ends, tinned ends of the wires make it extremely easy to solder.

[Package Included] 3 pairs XT60 Connectors Female & Male with 12awg 150mm soldered wire

Read more Read less

5mm Pinion Gear 48p Set 27T 28T 29T 30T 5mm Shaft Bore 48dp Pitch Pinion for RC

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[Hardened Steel] The 5mm shaft 48p pinion gear set are made of quality hardened steel, durable and reusable, enjoy your happy RC racing time.

[48P] 48P is the pitch of each tooth on 48p 5mm pinion gear and 27T 28T 29T 30T is the number of teeth on 5mm 48p pinion. You have to make sure your spur gear has the same pitch as 48 pitch pinion gear, or the teeth won't mesh.

[5mm 3.175mm] 48p Pinion Gear 5mm shaft diameter or bore is 5mm, make sure your RC motor shaft have the same diameter. Meanwhile, we have a 5mm to 3.175mm shaft coupler in the package. With the coupler, you can use your stock RC 3.175mm shaft motor too.

Comes with set screws for each 5mm shaft 48p pinion gear, the pinion gear set also included a hex key, easy to install. Please feel free to buy, we provide you with satisfactory after-sales service.

Read more Read less

Mod 1 Pinion Gear 5mm 13T 15T 17T 19T 21T Mod1 M1 Pinion Gear 5mm Shaft

RC Vehicle Transmission Gears

Buy on Amazon Find on eBay

[NOTE] To avoid damage or malfunctions caused by overheating, start with the minimum tooth size 5mm pinion gear and gradually upgrade to larger tooth sizes mod 1 pinion while regularly checking the ESC and motor temperatures during operation. With proper monitoring, you can safely increase your speed without risking damage to your equipment.

[Hardened Steel 5mm Pinion] The RC upgrades mod 1 pinion gear set is constructed from top-quality hardened steel, ensuring durability and longevity during your RC racing adventures. Thanks to the reusable design, you can enjoy a long-lasting racing experience that will stand the test of time.

[M1] Pinion gear 5mm with the M1 pitch 1/8 scale pinion gear defining the distance between each tooth on the pinion gear, and the number of teeth ranging from 13T to 21T, it's important to match the pitch of your mod1 pinion with that of your spur gear to avoid any issues with teeth meshing.

[5mm Shaft Pinion Gear] To ensure that your 1/8 pinion gear shaft and RC motor shaft are compatible, it's essential to check that both have a diameter or bore of 5mm.

[Mod1 Pinion Gear 5mm Set] With set screws for each gear and a hex key for easy installation, the 5mm pinion gear set combo is a breeze to set up. It also includes a 5mm to 3.175mm shaft coupler to make the installation process even more straightforward.

Read more Read less

XT60 Connectors Female Male - Easy Solder Functional Wire Cover for DIY Custom Lipo Battery RC Car 3D Printer (12 Female + 12 Male)

RC Servo Plugs & Wires

Buy on Amazon Find on eBay

[Upgrade] It is really upgrade compared to the standard design, easily remove the grey cover, easily handling significant current without the problems caused by screw-on terminals. Tight-fitting connector, are able to be connected/ disconnected easily.

[Recommend Wire] We recommend you to use 12awg wire to connect the XT60 connectors.

[Package Included] 12 XT60 Female Connectors and 12 XT60 Male Connectors.

Read more Read less

MakerDoIt MakerDoIt 4 Pack DB9 Connector Female Terminal Multifunctional

Buy on Amazon Find on eBay

[New Slim DB9 Connector] Introducing the new DB9 connector, designed with a slim profile to make your connections more efficient. At just 16.5mm in height, this connector is significantly thinner than traditional DB9 connectors, which are typically between 19mm and 21mm. This 4mm reduction in thickness means it can fit into tighter spaces with ease, providing you with more flexibility and convenience in your projects. Whether you are working in a cramped environment or simply looking for a more streamlined connection solution, our new DB9 connector is the perfect choice.

[High-Quality DB9 Solderless Connectors] Produced with the latest automated equipment, ensuring bright, full, and oxidation-resistant solder points. These db9 connectors offer durability and reliability for all your electronic projects.

[RS232 Serial Breakout Board] Includes a breakout board for easy wiring. Ideal for RS232 serial communications, featuring a clear pinout reference for quick and easy setup.

[How to Use the Db9 Breakout Board] Prepare your materials and tools. Loosen the wiring terminals, strip the cable by 35mm and the wire cores by 3mm. Insert the stripped wires into the corresponding terminals and tighten them. Place the outer shell over the board, secure it with the buckle, and check that all connections are secure.

[Package includes 4 packs:] Each pack includes a plastic case, a DB9 connector (female terminal), a wire clamp with 2 assembly screws, 4 cable covers (5mm, 7mm, 9mm, 10mm) for different wire sizes, and 2 long bolts. This package comes with 4 packs in total.

Read more Read less

MakerDoIt MakerDoIt 10 Pack SLE4442 Chip Intelligent Contact Cards IC PVC Blank Card M0.6

Identification Badges

Buy on Amazon Find on eBay

[Secure SLE4442 Chip Cards] The SLE4442 Chip Cards offer secure and reliable data storage with a built-in chip that provides 256 bytes of EEPROM memory, featuring a 3-byte programmable security code and durable PVC construction.

[Standard SLE4442 Chip Cards] These SLE4442 chip cards are designed to meet the standard card size of 85.5mm x 54mm (3.35 inches x 2.12 inches), making them compatible with most card readers and printers.

[Printer-Compatible SLE4442 Cards] These SLE4442 chip cards are perfectly compatible with all standard ID card printers, including brands like Evolis, Zebra, Badgy, Fargo, Magicard, and DataCard. With their standard size of 85.5mm x 54mm, these durable PVC cards feature 256 bytes of EEPROM memory and a 3-byte programmable security code, ensuring secure and reliable data storage.

[Versatile SLE4442 Chip Cards] The SLE4442 Chip Cards are highly versatile and can be used in various scenarios such as schools, gyms, and retail stores. They ensure data protection and long-lasting use, making them ideal for office buildings, residential communities, and other environments where secure data management is essential.

[10-Pack SLE4442 Chip Cards] These cards ensure seamless integration into your existing systems. Purchase with confidence knowing our dedicated support team is here to provide excellent customer service and comprehensive after-sales support, ensuring your complete satisfaction.

Read more Read less

T Plug T Connector, Upgrade Version, 15 Female + 15 Males (15pair)

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

[Work Smoothly] These T plug work fine with each other, also can be used if you already have another brand T plugs installed.

[No Shrink Tube] Protector cap does a good job than heat shrink, no need wrap around the wire, better in help keep the wires from shorting out.

[Upgrade caps] They get rid of the need for using that tiny bit of heat shrink at the back and give you a little more surface to grab onto when disconnecting a battery.

[15pair] The package included 15 female connectors and 15 male connectors, each connector has a protector cap.

Read more Read less

MakerDoIt FAQs

Is MakerDoIt Legit?

Yes, MakerDoIt is a legitmate brand on Amazon. After conducting a comprehensive analysis of 5,124 customer reviews for MakerDoIt products on Amazon, we have determined its average rating. Offering great value and satisfying quality, MakerDoIt has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from MakerDoIt on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more MakerDoIt products?

If you're interested in MakerDoIt and want to find more MakerDoIt products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type MakerDoIt in the search box and hit Enter to see the search results.
Find and click the correct MakerDoIt to go to the new page.
Select the products you want in the MakerDoIt buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more MakerDoIt products.

How does findthisbest choose the top MakerDoIt products?

We analyze millions of MakerDoIt products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase MakerDoIt products via FindThisBest?

Go to the MakerDoIt page.
Select the product you want in the MakerDoIt buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product 48P 19T 20T 21T 22T 23T Pinion Gear with Screw Dri..., you can view it on Amazon page.
Place your order on Amazon.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the MakerDoIt products, helping you make more informed buying decisions. We recommend best choices of the products from the MakerDoIt brand, helping you make better shopping choices with less time and energy.

Similar Brands