Elechawk feature image

Elechawk

Review rating Review rating Review rating Review rating Review rating 4.5 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Elechawk has 130 products for sale. Elechawk products range in price from $6.99 to $23.99, and the average price of all the products is about $13.39. It's affordable for most consumers, and you can feel free to pick your favorite products.

We found that most of the Elechawk products are manufactured by YUYING. The manufacturer provides Elechawk with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Elechawk products from the seller BaBlock. The brand holds an average rating of 4.5, testifying to its excellent reputation.

Elechawk Best Sellers

Last Updated: Jan 12, 2025

55 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit with Crimping Tool Compatible JST SYP Futaba for Hitec Spektrum RC

Includes 30 sets servo male, 30 sets female connector, 25 sets red male SYP 25 sets female SYP connector, 3 meters long 22AWG cables, 10 pcs servo connector clips, a tweezers and a Crimping Tool Kit in one box.
This terminal crimping tool has a ratcheting mechanism design which can also help you to save energy and strength. Comfortable to use and easy to operate. Crimping Range:0.25-1.5mm/23-16AWG, For 2.54mm 3.96mm KF2510/JST type connectors.
The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable.
The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current
Each set includes connector housing, protective connector housing and crimp pin connector. The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing

RC Remote Controlled AUX on/Off Electronic Switch Relay for Car Truck Boat LED Light Drone (4A)

Package include a RC switch and a JST to futaba/JR adapter. This RC switch can be connected to receiver AUX channel or other desire channel. Toggle the related switch on the transmitter, this RC switch will close or open.
Easily turn on or off lights, smoke system, bomb drops, plane canopies from your remote controller or transmitter
Super simple install, just plugs with the item you would like to control, no setup required. Just make sure in your radio the throw for the channel you would like to control is set to +/- 100%
Suitable for RC cars, trucks, planes, helicopter, quadcopter and drones
Input Voltage (DC):3.7-15V. load current (DC):4A (Continuous current)

elechawk 10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013

This is the male and female connector cable,
Upgrade JST-PH 2.0 connector, the pins will not loose easily
Must have for HV batteries and high performance
80mm length/per unit. 22AWG soft silicone wire
Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone

elechawk PH 2.0 Connector Pre-Crimped Cable Kit Compatible with JST-PH 2.0mm for Battery JJRC H36 Blade Inductrix Tiny Whoop Arduino mkr1010 MKR Zero (Female&Male Connector&Wire)

This kit includes female and male PH2.0mm 2/3/4/5/6 pin connector, 90pcs pre-crimped wire, Heat shrinkable tube and 1pcs tweezers. It is Perfectly Compatible with JST-PH2.0 connector
Widely used for circuit boards, Lipo battery, balance lead, circuit boards, speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers, electronic toys.
Suitable for Arduino mkr1010, MKR ZERO and MKR VIDOR 4000 lipo socket and tiny drone, tiny whoop, JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone
This set of connectors is easy to assemble, no crimping tool needed, just plug the pin to the housing
The pre-crimped cable is 24AWG soft silicone wire and 13cm(5.2inch) length.

RC LED Light Strips Kit for RC Car Crawler Truck Airplane Boat Drone Fixed Wing Traxxas TRX4 Axial SCX10 Color Changeable

This Light strips and controller kit is suitable for RC car, truck, RC airplane, RC boat, drone, fixed-wing and other RC vehicles.
The light color and lighting mode are changeable. Total 21 working modes. You can remote control the light via your transmitter or the button on the Light controller.
The LED strips are super bright. Covered thickened transparent heat shrinkable tube makes the light strips waterproof and durable,
Compatible with nearly all brand RC car truck crawler like Traxxas, Tamiya, Axial. HSP, or Redcat, etc.
Input voltage range: 6V-15V. Maximum power consumption: 6.6W. Length of light strip: 0.33m (13nch) * 2

GH1.25 Connectors and Pre-Crimped Silicone Cables Compatible with JST GH 1.25mm for Pixhawk 6C 6X Pixhawk 4 15cm Wires

15cm Pre-crimped GH1.25 to GH1.25 Cables * 180pcs ( 6 colors, each color 30 cables) 2P*20pcs, 3P*20pcs, 4P*20pcs, 5P*20pcs, 6P*20pcs, 7P*10pcs, 8P*10pcs, 9P*10pcs, 10P*10pcs, Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for the new version of Pixhawk 6C 6X, Pixhawk2 the cube, Pixhawk 4, Pixhawk4 mini, CUAV v5, Pixhack, Emlid edge, Pixracer, mini pix, and DJI inspire phantom flight controller.
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc

1.25mm Male and Female Connectors Socket and Plug with Pre-Crimped Cables Compatible with JST Molex PicoBlade 1.25 for Pixhawk Silicone 13cm Wire (Male and Female)

Include 1.25mm pitch connectors (2P, 3P, 4P, 5P, 6P male and female), 15cm Pre-crimped 1.25 to 1.25 Cables * 180pcs (6 colors, each color 30 cables), Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
Ideal for signal and wire-to-wire applications. You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually.
Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc..

2.54mm XH Connector Socket Kit with pre-Crimped Cable Wire 2/3/4/5/6/7 Pin Housing JST Adapter Cable Male and Female Compatible with JST-XH Connector (Connector&Socket)

This kit includes XH2.54mm(0.1 inch) 2/3/4/5/6/7 pin connector and socket, 90pcs pre-crimped wire, heat shrinkable tube and 1pcs tweezers. It is Perfectly Compatible with JST-XH2.54mm and XH2.5mm connector and socket
Widely used for Lipo battery balance lead, 3D printer, Woodland Just Plug Lights, circuit boards, speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers, electronic toys.
This set of connectors is easy to assemble, no crimping tool needed, just plug the pin to the housing
The pre-crimped cable is 22AWG soft silicone wire.

GH1.25 to Dupont2.54 Pre-Crimped Cables and Connectors Kit Compatible with JST GH 1.25mm for Pixhawk4 Pixhawk 6C 6X 20cm Silicone Wire

Included 20cm Pre-crimped GH1.25 to Dupont2.54 Cables * 180pcs ( 6 colors, each color 30 cables), GH1.25 and Dupont2.54 connectors, Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Suitable for Pixhawk4, Pixhawk6C, 6X, Pixhawk2 the cube, Pixhack, Pixracer, PXFmini, CUAV v5, EDGE, and Inspire, Phantom and Raspberry Pi etc. flight controller
You can achieve connection between flight controller and camera, VTX, GPS, Telemetry module, Bluetooth module, OSD, or ultrasonic sensor etc.
Ultra soft silicone wire, still has very good flexibility at low temperature.

elechawk LED Light Strip for RC Fixed Wing Airplane Flying Wing Plane AR Wing Drone Model Car Truck (Ice Blue)

Package Include 2 LED strips, Y-cable
Suitable for fixed-wing like AR Wing, Skyhunter, ZOHD Talon etc..
The LED strip is super brightness and light. 0.5m length LED strip is almost suitable for all size of fixed wing.
As underbody light suitable for Drift Car, Model Truck and Crawler Car
Rating voltage: 4-6V

elechawk 2 Sets Pan Tilt Servo Mount Bracket for MG996R S3003 Steering Gear Robot Car Boat

Include 2 sets servo mount
Compatible with Tower Pro MG996, MG996R, SG5010 or HS322, HS422, Hitec, Parallax, Futaba S3003, etc 40×20×36mm servo.
This set bracket can be assembled to a 2 Degree of Freedom gimbal. Pan and Tilt for a horizontal surface
Aluminium Matte Coat, light and strong. high quality ball bearing, rotating smoothly
A camera or sensor can be mount on the bracket for a robot or a rover. The servo bracket can also be used in the shoulders and knees or another joint of humanoid robots, biped robots etc.

SH1.0 to DP 2.54 Pre-Crimped Cables and Connectors Kit Compatible with JST SH 1.0mm for I2C Qwiic Stemma QT Wire FPV Drone flight controller SpeedyBee F405 Holybro Kakute H7 F7 T-Motor Velox F7

Included 20cm pre-crimped SH1.0 to female DP 2.54 Cables * 140pcs, 20cm pre-crimped SH1.0 to male DP 2.54 Cables * 60pcs, SH1.0 and DP2.54 connectors, Heat shrinkable tubes and Tweezer * 1pcs
Easy to assemble. You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Suitable for FPV drone flight controllers like SpeedyBee F405 WING MINI, SpeedyBee F405, SpeedyBee Stack F7 F4, T-Motor Velox F7 SE, Holybro Kakute H7, F722, Skyline32 F1 F3, etc.
It can also achieve the connection between SparkFun development boards and sensor boards or UNO R4 Wifi board.
Ultra soft silicone wire, still has very good flexibility at low temperature.

5 Pcs JR/Futaba Style Servo 1 to 2 Y Harness Leads Splitter Cable Male to Female Extension Lead Wire for RC Models Airplane 7cm

Includes 5 pieces of cables.
Y Servo Leads are durable, soft and light
10cm lenght.
Servo Plug Type: Futaba compatible with JR / Spektrum / Hitec
Work with RC Cars, Planes, Helicopters, & Drones. It can be used to control 2 servos at the same time.

elechawk 4 PCS Female T-Plug Deans to Male Adapter Compatible with TRX Connector for RC Battery ESC and Charger

Included 4pcs of female deans to connector compatible with male TRX adapter
Connection is very solid and secure
Good soldering quality. Copper contact. Low resistance
Used for converting battery connector compatible with TRX to Deans on ESC or charger

40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit Compatible JST SYP Futaba for Hitec Spektrum RC

Includes 20 sets servo male, 20 sets female connector, 20 sets red male SYP 20, sets female SYP connector, 3 meters long 22AWG cables, and a tweezers in one box. Easy to store
The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable.
The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current
Each set includes connector housing, protective connector housing and crimp pin connector.
The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing

elechawk JST-XH 4S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone

Included 5 PCS of 4S Extension Lead
200mm length, 22AWG soft silicone wire can endure enough current
Separate insulation effectively prevents short-circuit between pins
JST-XH connector - the most common style lipo balance plug
Usefull for DIY special 4s lithium battery or lipo battery

elechawk 1.25mm Pitch Connectors and Pre-Crimped Cables Compatible with JST Molex PicoBlade 1.25mm for Pixhawk Silicone 15cm Wire

Include 1.25mm pitch connectors(2P*20pcs, 3P*20pcs, 4P*20pcs, 5P*20pcs, 6P*20pcs, 7P*10pcs, 8P*10pcs, 9P*10pcs, 10P*10pcs), 15cm Pre-crimped 1.25 to 1.25 Cables * 180pcs ( 6 colors, each color 30 cables) , Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Compatible With Molex PicoBlade. Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc

elechawk 4PCS RC Transmitter Stick Protector Protective Cover for Frsky X9D X7 Jumper T16 Flysky TH9X Spektrum

Package included: Stick protector * 4
This protector can be used to protect the stick of your RC transmitter during transport.
The size of the center hole is proper to hold the stick without loosening
It is suitable for nearly all brand radio transmitter like frsky X9D X7, flysky FSi6 FSi6X, Jumpter T16, Spektrum, Futaba, JR

elechawk Waterproof LED Light Strips for RC Cars Trucks Airplanes Boats Drones Fixed Wing AR Wing Model Underglow Light (Pink)

Package includes 2 waterproof LED light strips, 1 Y-cable.
Covered thickened transparent heat shrinkable tube makes the light strips waterproof and durable. it is water-resistant, hit-resistant, and wear-resistant. The LED strips are super bright.
Suitable for RC cars, trucks, airplanes, boats, drones, and fixed-wing like AR Wing, Skyhunter, ZOHD Talon, etc.
The lights can be mounted under the chassis as underglow lights or mounted inside the body case of RC cars. The total length of 1 meter (39.4inch) light strip is almost suitable for all sizes of RC cars or airplanes
Acceptable input voltage: 5V to 7.5V. Recommend input voltage: 5V to 6V. Rating power: 8.5W@6V (2 light strips)

3 Pairs XT60 Plug Female and Male Connector with 12AWG Silicon Wire for RC Lipo Battery Cable Drone

Include 3 PCS XT60 female cable and 3PCS XT60 male cable
Good soldering quality. Copper contact. Low resistance
Used for RC car, quadcopter and boat battery connection
Conductor Material: 12AWG Tin-plated copper
Rates up to 55A continuous. Provides solid and reliable connection

Elechawk FAQs

Yes, Elechawk is a legitmate brand on Amazon. After conducting a comprehensive analysis of 9,811 customer reviews for Elechawk products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Elechawk has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Elechawk on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Elechawk and want to find more Elechawk products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Elechawk in the search box and hit Enter to see the search results.
  3. Find and click the correct Elechawk to go to the new page.
  4. Select the products you want in the Elechawk buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Elechawk products.

We analyze millions of Elechawk products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 130 Elechawk products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Elechawk page.
  2. Select the product you want in the Elechawk buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product 55 Sets Servo Plug Male Female Connector Crimp Pin..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the Elechawk products are produced by YUYING. The manufacturer provides Elechawk with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the Elechawk products, helping you make more informed buying decisions. We recommend best choices of the products from the Elechawk brand, helping you make better shopping choices with less time and energy.