3Dman

4.3 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, 3Dman has 19 products for sale. 3Dman products range in price from $6.99 to $13.99, and the average price of all the products is about $9.73. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase 3Dman products from the seller 3Dman. The brand holds an average rating of 4.3, testifying to its excellent reputation.

3Dman Best Sellers

Last Updated: Jan 12, 2025

3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin

Electrical Outlet Switches

Buy on Amazon Find on eBay

Pay Attention to: This On/Off Power Socket Switch is installed well in a whole set, it can be used directly when get it , Safe & Convenient for adding 3pcs wires.

Inlet Module: Standard IEC320 C14; Installed Fuse: 10A; Rocker Switch: illuminated to show power status, 6A 250V AC 10A 125V AC.

Widely Used: 3D Printers, Computer, home appliance or DIY small project on power supply distribution and control.

L x W x H : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3".

Plug Type : 3 Pin IEC320 C14.

3Dman PC4-M10 Male Straight Pneumatic PTFE Tube Push in Quick Fitting Connector for E3D V6 Long-Distance Bowden Extruder 3D Printer Parts (20pcs)

Buy on Amazon Find on eBay

20 x PC4-M10 pneumatic male straight quick connector for E3D V6 long-distance bowden extruder 3D printer. for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer.

Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life.

The upper part(black) can be inserted 4mm PTFE tube and self-locking.

Good fittings and high performance.

PTFE Tubing Outer Diameter: 4 mm. Thread: 9.7 mm.

3DMAN Heatbed Silicone Leveling Column, Solid Bed Mounts 12 PCS 18mm+ 4 PCS 16mm Stable Hotbed Tool Heat-Resistant Silicone Buffer for 3D Printers (16 PCS)

Buy on Amazon Find on eBay

[Upgrade] Major upgrade from the original leveling spring - Now you spend much less time leveling your 3D Printer bed. Once you get level, you won't need to re-adjust for quite a while. Effectively avoid layer shifts caused by bed shaking during printing. The trick is that the short mount needs to go ON TOP of the strain relief, not under it.

[Application] Replace original spring leveling for Creality 3D Printer Hot Bed/ Platform. The 1/4 quantity in the package is a short column.

[Function] Larger contact surface than spring, reduce shock, heatbed silicone leveling column better to level your 3D printer.

[Size] Height: 12 pcs 18mm(0.71inch) + 4 pcs 16mm(0.63inch). There is a Bed Cable cage at the left rear of the Creality Ender 3D Printer series, the short column will fit there. And other 3D printer series take 4 high columns.

[Package] 16 PCS heatbed silicone leveling column. For 3D printer hot bed / platform bottom connection, can replace the original spring leveling

Read more Read less

3Dman GT2 20 Toothless Bore 5mm Aluminum Timing Belt Idler Pulley for 6mm Width 3D Printers (10pcs)

Mechanical Timing Pulleys

Buy on Amazon Find on eBay

Used for GT2 6mm Wide Timing Belt.

20 Toothless timing belt idler pulley, bore 5mm.

Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.

Material: Aluminium alloy

3DMAN 3D Touch Auto Bed Leveling Sensor for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers

Buy on Amazon Find on eBay

The 3D Touch auto leveling sensor is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .

Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.

The main functions and controls of 3D touch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D printer touch can be used on almost every 3D printer control board.

NOTE: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate. Any problem when you receive the order, CONTACT US FIRST please!

By using progressively designed solenoid and hall sensor, it can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience.

Read more Read less

3Dman Dual Drive Bowden Extruder Universal Geared Extruders for Ender 3 V2, Ender 3 Pro, Ender 3 Series, CR10 Series, Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer

3D Printer Extruders

Buy on Amazon Find on eBay

Dual Drive technology: This Bowden utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears,which will minimize slippage and increase feeding strength.

Fastening Spring Device: Bowden extruder allows the user to fine-tune the tightness with screw nut to fit with the most filament, such as PLA/ABS/ PETG/ TPU/NYLON/CARBON FIBER/WOOD.

Reduction Gear Device: It can give out more torque,reduce the burden of the motor, extend the life of the motor.

For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer.

We recommend E-steps: 385. Any problem when you receive the order, CONTACT US FIRST please!

Read more Read less

3Dman Filament Welder Connector, Broken Filament Connector Sensor for 1.75mm Filament 3D Printers, Red

3D Printing Filament

Buy on Amazon Find on eBay

Refuse filament waste: If the filament is disconnected during printing, or there is surplus material after printing, which is not enough to print a model, it can be connected to continue printing.

Print models in multiple colors: different colors of the same filament can be connected to print out a multi-level model.

Wide range of applications for most 1.75mm filaments: PLA/ABS/PETG/PC/PP/PVB/HIPS, etc. Allen Key × 1.

NOTE: The nylon displayed in pictures is just for reference ,NOT included in the package.

NOTE: Filament often lose water and become brittle when exposed to the air for a long time. In order to prevent the filament from becoming brittle, please keep it sealed

FRQ: why is the received connector aperture larger than the standard 1.75? A: when using the lighter to heat, the consumables expand when they meet the heat, so the aperture needs to be designed a little larger, otherwise the connection is not easy to succeed;

FRQ: why is the aperture of the connector received larger at one end and smaller at the other end? Is it not done well in the factory? A: when connecting, please push from the small end to the large end. This is the design of the connector.

FRQ: why can't I get it all right? A: please check if the Filaments are damp and of the same material. Take a look at the video and practice more. I believe most of the clients will succeed.

Read more Read less

3Dman Dual Gear Extruder Drive Feeder Upgrate for Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers

Buy on Amazon Find on eBay

Double-gear and double-pneumatic joint extrusion structure, high extrusion force, enhancing the feed strength , ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps.

NOTE: Compatible with Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D printers. ONLY suit for 3d printers with motor shaft over 20mm, please measure the shaft length before placing the order.

All-metal aluminum alloy, High quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal dual gear extruder is stable and durable.

The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan. DIY：You can simply install it by yourself.

NOTE : Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use; for 3d printers with filament detector, as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height; for Vyper users, please swap the motor wire sequence to make it turn forward instead of reverse.

Read more Read less

3DMAN GT2 Timing Belt Aluminum Gear Clamp Mount Block 9X40mm for Width 6mm 3D Printers (10PCS)

Buy on Amazon Find on eBay

Used in open belt closures for 2GT(and some other models) 6mm belt.

Size: 9 * 40mm, the middle hole M4 is fixing hole.

Pitch: 1.1mm (the groove part).

Tooth width: 0.85 mm, Depth of the tooth: 0.9 mm.

Material: Oxidation Treatment Aluminium Alloy. Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.

3Dman Extruder Back Support Plate with 3pcs 2020V POM Pulley for 3D Printers

Buy on Amazon Find on eBay

Necessary accessories, compatible with Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D printers.

Suitable for 2020 V-series aluminum profiles, adjust the sliding smoothness by adjusting the hex eccentric column.

Pulley Diameter: about 24mm/ 0.9 inch. Pulley Height: about 11mm/ 0.4 inch.

Material: Back Plate is made of high quality cold rolled sheet material, pulley is made of high quality polyformaldehyde, very durable and smoothy.

Exact replacement for the stock carriage plate. Nice that new wheel assemblies were also included.

3DMAN T8 Anti-Backlash Spring Loaded Nuts Elimination Gap Nut Z-axis for 3D Printer Ender3 CR10 Series and Tornado CNC Machine 8mm Acme Threaded Rod Lead Screws (2pcs)

Buy on Amazon Find on eBay

Lead Screw Diameter: 8mm, Pitch: 2mm, Lead of thread: 8mm; two small M3 holes centre distance is 18mm.

The anti backlash nut are compatible with Creality CR10 CR-10S Ender-3 Ender 3S Ender3 Pro and other 3D printer.

8mm lead T8 lead screw is with 4 starts.

Special anti-backlash nut, high-precision, low-cost DIY engraving machine, the first choice for printers.

3Dman 4PCS 40mm Hand Twist Leveling Nut + 4PCS Hot Bed Spring Compression+ 4PCS M4X40mm Screws for 3D Printers（4 Set）

Buy on Amazon Find on eBay

Upgraded Hand Twist Levelling Nut：for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D printers.

The torque of the hand twisted nut is large, making it easier to fine tune the hot bed. And our knobs are made of ABS material, make the leveling is safer and does not hurt the hand.

High quality Plastic material, durable and resistant. Making your leveling process much easier, which is really a great way to upgrade your 3D printer with a little prices.

Includes 4* upgrade leveling nuts, 4* mold springs, and 4* screws. This saves you the time and effort of buying accessories separately.

Easy to install: High quality leveling knob kit can make the printer much more stable and makes hot bed becomes much steadiness when printing.

Read more Read less

3Dman T8 Anti-Backlash Spring Loaded Nuts Elimination Gap Nut Z-axis for Upgrade Ender 3 Ender 3s Ender 3 Pro V2 CR-10 Tornado 3D Printer 8mm Acme Threaded Rod -4pcs

Buy on Amazon Find on eBay

Lead Screw Diameter: 8mm, Pitch: 2mm, Lead of thread: 8mm; two small M3 holes centre distance is 18mm.

The anti backlash nut are compatible with Creality CR10 CR-10S Ender-3 Ender 3S Ender3 Pro and other 3D printer.

8mm lead T8 lead screw is with 4 starts.

Special anti-backlash nut, high-precision, low-cost DIY engraving machine, the first choice for printers.

3Dman GT2 Timing Belt Closed Loop Rubber Belt 110mm 200mm 300mm 400mm 610mm for Width 6mm 3D Printers -5pcs

Buy on Amazon Find on eBay

Product name: GT2-6mm Close Loop Timing Belt.

Belt Pitch: 2mm, Belt Width: 6mm.

Material: rubber.

Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.

Package Included: 1x 110mm Timing Belts 1x 200mm Timing Belts 1x 300mm Timing Belts 1x 400mm Timing Belts 1x 610mm Timing Belts.

3DMAN MK7/MK8 Extruder Gear 36 Teeth Bore 5mm Stainless Steel Drive Gear for 3D Printers- 10pcs

3D Printer Extruders

Buy on Amazon Find on eBay

Package : 10 PCS extruder gears, sufficient quantity to satisfy your various demands and replacements.

Size : 11 x 11 mm/ 0.43 x 0.43 inch (L x W), its inner diameter is 5 mm/ 0.2 inch, 36 teeth, fit for most 3D printers.

Replace your broken one and make your printer work more efficiently, improve the performance and reliability for your 3D printers.

Made of quality stainless steel, rustproof and no corrosion, durable and stable to use, with good bearing capacity, allow for improving your printers' work efficiency.

Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.

3Dman V Gantry Plate 3D Printer Parts with Mini V-Wheels for 2020 V-Type Aluminum Profile

Buy on Amazon Find on eBay

Material: Aluminum Alloy.

Easy to assemble and disassemble.

Small V-Wheel with Plate for 2020 Aluminum Profile for CNC and 3D Printer Parts Kossel Black Wheel

Plate-L*W*H: 50mm*50mm*6mm, Small V-Wheel diameter:15.5mm

for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Vyper Series and Other 3D printers.

3Dman POM Big Plastic Pulley Wheel with Bearing Idler for Creality Ender 3, Ender 3 Pro, Ender 3 V2, CR-10, CR-10S Series 3D Printer, 10 Pcs

Buy on Amazon Find on eBay

Outer Diameter: 24mm. Bore: 5mm. Height: 10.2mm. Net Weight: 14g/pcs .

[High Quality Material] 3DMAN POM pulley wheels are made of high quality POM material, which has excellent abrasion performance, flame retardancy and anti-oxidation, Also strong material with outstanding wear ratios.

[Smooth and Precise] T hese smooth and precise POM wheels move smoothly, solve wobble problem, have low noise and high printing accuracy, and can greatly increase the printing speed, which are useful 3D printer accessories

[NOTE] Please be aware there's a movable copper ring between bearings. It's normal if the ring moves, otherwise bearing can't rotate. It's not quality issue.

Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.

Read more Read less

3Dman 24V 50W Heater Cartridge 620 Heating Tube HT-NTC100K Thermistor 1M for 3D Printers Sensor Heater Block V6 J-Head Hotend (5 Pcs)

Buy on Amazon Find on eBay

Voltage: 24V, Power: 50W, Head diameter: 6mm, Head length: 20mm, Total length:1 Meter.

From the original ordinary 0.3-line high-temperature line to 0.6-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.

From the original 40W power up to 50W, therefore, the maximum temperature increases from 300-310℃ to 340-350℃ or so.

The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.

24V 50W Heater Cartridge 620 Heating Tube HT-NTC100K Thermistor 1M for 3D Printers Sensor Heater Block V6 J-Head Hotend (5 Pcs). Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).

Read more Read less

3Dman V Gantry Plate Set V-Wheel for 2020 V-Type Aluminum Profile Wheels for 3D Printers and CNC

Buy on Amazon Find on eBay

Material: Aluminum Alloy

Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.

Type: Wheel Kit/Wheel

Apply to: 2020 V Gantry Plate aluminum profile.

Plate Size: 2.56"*2.56"*0.12"/65mm*65mm*3mm(L x W x H); Pulley Dia: 0.95"/ 24mm; Pulley Height: 0.43"/11mm.

3Dman FAQs

Is 3Dman Legit?

Yes, 3Dman is a legitmate brand on Amazon. After conducting a comprehensive analysis of 2,907 customer reviews for 3Dman products on Amazon, we have determined its average rating. Offering great value and satisfying quality, 3Dman has achieved a respectable rating of 4.3 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from 3Dman on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more 3Dman products?

If you're interested in 3Dman and want to find more 3Dman products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type 3Dman in the search box and hit Enter to see the search results.
Find and click the correct 3Dman to go to the new page.
Select the products you want in the 3Dman buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more 3Dman products.

How does findthisbest choose the top 3Dman products?

We analyze millions of 3Dman products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase 3Dman products via FindThisBest?

Go to the 3Dman page.
Select the product you want in the 3Dman buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product 3Dman 15A 250V Rocker Switch On/Off Power Socket I..., you can view it on Amazon page.
Place your order on Amazon.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the 3Dman products, helping you make more informed buying decisions. We recommend best choices of the products from the 3Dman brand, helping you make better shopping choices with less time and energy.

Similar Brands

Watts Water Technologies