Micro-Swiss

4.5 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Micro-Swiss has 140 products for sale. Micro-Swiss products range in price from $7.99 to $149.99, and the average price of all the products is about $62.48.

We found that most of the Micro-Swiss products are manufactured by Micro Swiss, Micro Swiss LLC, and Microswiss. The manufacturers provide Micro-Swiss with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Micro-Swiss products from the seller Micro Swiss. The brand holds an average rating of 4.5, testifying to its excellent reputation.

Micro-Swiss Best Sellers

Last Updated: Jan 12, 2025

Microswiss FlowTech Hotend Upgrade for Creality K1 / K1 Max / K1C - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design - Made in USA

Buy on Amazon Find on eBay

Drop-in upgrade: FlowTech hotend is designed to be an easy drop-in upgrade for each 3D printer model. This updated edition is designed for Creality K1 / K1 Max and K1C . Stock z-height, build volume and firmware remains unchanged.

Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.

Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.

High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.

All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.

Read more Read less

Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Drop in Upgrade, No modifican Required)

3D Printer Extruders

Buy on Amazon Find on eBay

Drop in Direct Drive Extruder for CR-10 and Ender 3 Series. It is Fully Compatible with Creality CR-10 / CR-10s / Ender 3 / Ender 3 Pro / Ender 3 V2

High Torque: 3:1 Gear ratio

This kit comes with everything you need to upgrade your printer to a Direct Drive Extruder. It comes with 1x Master Extruder Assembly 1x Adaptation plate 1x Stepper motor 1x Fan Shroud 1x Custom extension cable 1x Hotend assembly and hardware kit.

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design. This further increases system rigidity.

Made in USA by Microswiss

Read more Read less

Microswiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm

Buy on Amazon Find on eBay

Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 Pro / Ender 5 / TronXY X5S

Nozzle size: 0.4mm

Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock

This is a Drop in All Metal Conversion Kit for Creality printers

Made in USA by Microswiss

Microswiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

3D Printer Extruders

Buy on Amazon Find on eBay

Fits: CR-10 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro

Nozzle size: .4mm

Filament size: 1.75mm

Made in USA by Microswiss

Microswiss CM2 MK8 Nozzle for Makerbot, Creality Ender 3, Ender 3 S1, Ender 5, CR-10 Series - Copper Core - M2 Hardened Steel Tip - Superior Thermal Performance - Exceptional Wear Resistance (.4mm)

Buy on Amazon Find on eBay

FITMENT: Anet A8 / CraftBot / Creality CP-01 / CR-10 / CR-10 V2 / CR-10 V3 / CR-10 MINI / CR-10-S4 / CR-10-S5 / CR-10S / Ender 2 / Ender 3 / Ender 3 V2 / Ender 3 Pro / Ender 3 S1 / Ender 3 Max / Ender 5 / Ender 5 Plus / Ender 5 Pro / Ender 6 / Flsun QQ-S / A10, A20, A30 / MakerBot Replicator 1, 2, 2x, 5th Gen, Mini, Z18 / Micro Swiss All Metal Hotend / Sovol SV01 / Snapmaker 3-in-1 3D Printer / Tevo Tornado / TronXY X5S

MATERIAL: Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

PLATING: Nozzle is plated with Electroless Nickel Plating. The M2 Hardened High Speed Steel insert is Plated with a Electroless Nickel Plating and Coated with nonstick nano WS2 coating.

ANY FILAMENT: Works with most FDM printing materials such as PLA/ABS/PETG/TPU.

QUALITY: MADE IN USA by Microswiss. This nozzle comes with Limited lifetime warranty against wear!

Read more Read less

Microswiss Bowden Dual Gear Extruder Compatible with Creality Ender, CR10, CR-10 Pro, CR-10S, CR6-SE, Tornado

3D Printer Extruders

Buy on Amazon Find on eBay

Fits: Bowden extruder machines, Fits NEMA 17 size stepper motors

Fits: Ender 3, 5, 6, CR10, CR-10s Pro, CR-10S, CR6-SE, Tornado

Made in USA by Microswiss

Microswiss Brass Plated Nozzle for FlowTech™ Hotend (0.6mm)

Buy on Amazon Find on eBay

Microswiss FlowTech Hotend Upgrade for Sovol SV08 - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design - Made in USA

Buy on Amazon Find on eBay

Drop-in upgrade: This kit comes with a plug and play Heater Core and thermistor, fully compatible with Sovol SV08 printer. Stock z-height, build volume and firmware remains unchanged. By upgrading your Sovol SV08 to a FlowTech ecosystem, you can utilize a comprehensive range of FlowTech, leak-proof nozzles. These nozzles include the DiamondBack, CHT High Flow, and CM2 Hardened tip nozzles.

High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.

Read more Read less

Micro Swiss Direct Drive Upgrade Kit for Creality Ender 5 / Ender 5 Pro / Ender 5 Plus - Made in USA

Buy on Amazon Find on eBay

Fits: Ender 5 / Ender 5 Pro / Ender 5 Plus

Orifice size: .4mm

Filament size: 1.75mm

Made in USA by Microswiss

Microswiss FlowTech™ CHT - High Flow Nozzle - Equipped with Bondtech CHT Technology - Multi Filament Channel Design (0.4mm)

3D Printer Extruders

Buy on Amazon Find on eBay

Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.

High Flow CHT - The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec

Better layer adhesion - More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers

Compatible with - The FlowTech CHT nozzle is compatible with all FlowTech hotend models

Orifice size available: 0.4mm, 0.6mm, 0.8mm, 1.0mm

Made in Sweden by Bondtech - Assembled in USA by Microswiss

Read more Read less

Microswiss Heater Block Upgrade with Silicone Sock for CR10 / Ender 2 / Ender 3 / ANET A8 Printers MK7, MK8, MK9 Hotends

Buy on Amazon Find on eBay

Fits: CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender-2 / TronXY X5S / MK7, MK8, MK9 Hotends

Heater Block dimensions: 20mm x 20mm x 10mm

Material: Aluminum

Made in USA by Microswiss

Microswiss FlowTech - CM2 Nozzle - Copper Body, M2 Hardened High Speed Steel Tip, Long Life, Wear Resistant, Made in USA (.4mm)

Industrial Dispensing Nozzles

Buy on Amazon Find on eBay

Microswiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

Copper Chromium Zirconium body - Plated with an Electroless Nickel Plating

M2 Hardened High Speed Steel insert

Plated with a Electroless Nickel Plating

Coated with nonstick nano WS2

Coefficient of friction: 0.035

Heat-treated hardness: 68 HRC

Made in USA

Microswiss FlowTech Hotend for Creality Ender 3 V3 KE - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design - Made in USA

3D Printer Extruders

Buy on Amazon Find on eBay

High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.

300°C Max Temperature: This hotend is rated at 300°C temperature with a properly tuned NTC thermistor for each specific printer. This particular edition is perfectly tuned for Ender 3 V3 KE so no firmware changes are needed.

Made in USA by Microswiss

Read more Read less

Microswiss MK7/MK8/MK9 Silicone Socks for CR10 / Ender 3 / ANET A8 Printers (Pack of 3)

Buy on Amazon Find on eBay

Heat-resistant, Non-stick Silicone Material

Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender-2 / TronXY X5S / MK7, MK8, MK9 Hotends

Helps to keep the hotend temperature stable

Pack of 3

Microswiss Plated Copper High Temperature MK8 Heater Block Upgrade for CR10 / Ender/ANET A8 Printers MK7, MK8, MK9 Hotends

Buy on Amazon Find on eBay

Fits: CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender-2 / MK7, MK8, MK9 Hotends

Block dimensions: 21mm x 20mm x 10mm

Material: Plated Copper

For high temperature application

Made in USA by Micro Swiss

Microswiss NG Direct Drive Extruder for Creality Ender 5/5 Pro / 5 Plus (Drop in Upgrade, No modifican Required)

3D Printer Extruders

Buy on Amazon Find on eBay

Drop in Direct Drive Extruder Ender 5 Series. It is Fully Compatible with Creality Ender 5 / Ender 5 Pro / Ender 5 Plus 3D Printers.

High Torque: 3:1 Gear ratio

Made in the USA by Microswiss

Read more Read less

Microswiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 / Ender 3 Pro/Ender 3 V2 Printers - Drop in Upgrade - Rapid Nozzle Change Revo Technology

3D Printer Extruders

Buy on Amazon Find on eBay

Fits: CR-10 / CR-10s / Ender 3 / Ender 3 Pro / Ender 3 V2 / Sunlu S8 / Sunlu S8 Pro

3:1 Gear ratio

Adaptable to wide range of 3D Printers

Seamless integration with Revo Hotend (24V)

Microswiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 (Linear Rail Edition) Drop in Upgrade - Light Weight - Made in USA

3D Printer Extruders

Buy on Amazon Find on eBay

Fits Following printer with MGN12 Linear Rail with MGN12H Carriage Block:CR-10 / CR-10s / CR-10-S5 / Ender 3 / Ender 3 Pro / Ender 3 V2 / Sunlu S8 / Sunlu S8 Pro

3:1 Gear ratio

Adaptable to wide range of 3D Printers

Integrated with a Microswiss All Metal Hotend

Made in USA by Microswiss

Microswiss Replacement MK8 Hotend Assembly, Compatible with Micro Swiss Hotends, Micro Swiss Direct Drive, Micro Swiss NG™ Direct Drive (.6mm)

3D Printer Extruders

Buy on Amazon Find on eBay

FITMENT: Compatible with Micro Swiss Hotends, Micro Swiss Direct Drive, and Micro Swiss NG Direct Drive ( Compatible with Micro Swiss SKUs: M2583 M2591 M2601 M2603 M2605 M2607 M3201 M3202 M3203 M3204 M3205 M3206 )

WHAT'S IN THE BOX: Micro Swiss MK8 Brass Plated Nozzle (.4mm) , Micro Swiss MK8 Heater Block, Micro Swiss Titanium Thermal Break

MADE IN USA: All Micro Swiss products are developed, designed and manufactured in the USA. This ensures the highest level of material quality and high precision machined parts guaranteed to fit compatible printers.

TECHNICAL & CUSTOMER SUPPORT: Reach out to us and meet our industry leading customer support team, along with our experienced 3D Printer technicians who can assist you on any support questions you have!

Read more Read less

Microswiss All Metal Hotend Kit (for CR-10s PRO/CR-10 Max/Ender 3 V2 Neo) - Drop in Upgrade - Made in USA

Buy on Amazon Find on eBay

This is a drop in All Metal Conversion kit for the CR-10s Pro printers. It requires absolutely zero modification to your printer to install.

Our uniquely designed cooling block eliminates need for a thermal tube. By not having a separate thermal tube inside the cooling block, it allows for faster heat dissipation.

The thermal heat break is made from Grade 5 Titanium Alloy to provide excellent thermal isolation between the heater and the cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined meltzone.

Fits: CR-10s Pro, CR-10s Pro V2, CR-10 Max

Micro-Swiss FAQs

Is Micro-Swiss Legit?

Yes, Micro-Swiss is a legitmate brand on Amazon. After conducting a comprehensive analysis of 5,646 customer reviews for Micro-Swiss products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Micro-Swiss has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Micro-Swiss on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more Micro-Swiss products?

If you're interested in Micro-Swiss and want to find more Micro-Swiss products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type Micro-Swiss in the search box and hit Enter to see the search results.
Find and click the correct Micro-Swiss to go to the new page.
Select the products you want in the Micro-Swiss buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Micro-Swiss products.

How does findthisbest choose the top Micro-Swiss products?

We analyze millions of Micro-Swiss products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase Micro-Swiss products via FindThisBest?

Go to the Micro-Swiss page.
Select the product you want in the Micro-Swiss buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Microswiss FlowTech Hotend Upgrade for Creality K1..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the Micro-Swiss products?

Most of the Micro-Swiss products are produced by Micro Swiss, Micro Swiss LLC, and Microswiss. The manufacturers provide Micro-Swiss with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the Micro-Swiss products, helping you make more informed buying decisions. We recommend best choices of the products from the Micro-Swiss brand, helping you make better shopping choices with less time and energy.

Similar Brands