Taytools feature image

Taytools

Review rating Review rating Review rating Review rating Review rating 4.6 Fact checked
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Taytools has 306 products for sale. Taytools products range in price from $12.67 to $139.99, and the average price of all the products is about $51.63.

We found that most of the Taytools products are manufactured by Taylor Toolworks and Taylor Toolworks LLC. The manufacturers provide Taytools with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Taytools products from the seller Taylor Toolworks. The brand holds an average rating of 4.6, testifying to its excellent reputation.

Taytools Best Sellers

Last Updated: Jan 8, 2026

Taytools 106392 4 Piece Set 8” x 8” Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002”

Carpentry Squares
Taytools 106392 4 Piece Set 8” x 8” Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002” Cover
Buy on Amazon Find on eBay
These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002” (two thousandths of an inch) over the length of each arm.
Overall size is 8-inch x 8-inch. Leg thickness is 1.130 inch and leg width is 0.1.570 inch.
They come in sets of 4 each.

Taytools 12" Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8", 1/16", 1/32" and 1/64" MRSAE-12

Construction Rulers
Taytools 12" Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8", 1/16", 1/32" and 1/64" MRSAE-12 Cover
Buy on Amazon Find on eBay
Made from hardened spring steel.
Rigid blade is 12" long, .040” thick and 1” wide
Rule is precision photo etched and black filled for long life and easy readability
Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other
Brushed finish

Taytools 6 Inch Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8, 1/16, 1/32 and 1/64 Inches MRSAE

Construction Rulers
Taytools 6 Inch Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8, 1/16, 1/32 and 1/64 Inches MRSAE Cover
Buy on Amazon Find on eBay
Made from hardened spring steel.
Rigid blade is 6" long, .040” thick and 1” wide
Rule is precision photo etched and black filled for long life and easy readability
Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other
Brushed finish

Taytools 100 Pack 10mm x 50mm x 24mm Beechwood Loose Tenons Compatible With Domino Loose Tenons Joinery Systems

Taytools 100 Pack 10mm x 50mm x 24mm Beechwood Loose Tenons Compatible With Domino Loose Tenons Joinery Systems Cover
Buy on Amazon Find on eBay
100 Pack 10mm x 24mm x 50mm Beechwood Loose Tenons
Solid kiln-dried Beech hardwood for strength and durability
Compatible with slots cut by Domino loose tenon joinery system
Elongated design will not rotate, ensuring perfect alignment of parts during gluing
Overall length approximately 2mm shorter than nominal length to provide space for glue

Taytools 467900 French Gimlet 7 Piece Set 2, 2.5, 3, 3.5, 4, 4.5 and 5 mm Boring Drill Tool for Pilot Holes Screw Tip Auger Shafts

Drill Bits Boring Drill Bits
Taytools 467900 French Gimlet 7 Piece Set 2, 2.5, 3, 3.5, 4, 4.5 and 5 mm Boring Drill Tool for Pilot Holes Screw Tip Auger Shafts Cover
Buy on Amazon Find on eBay
This is a 7 piece set with sizes ranging from 2 to 5 mm or 1/16 to 3/16 inches. They can be used for screws from #2 through #11
Gimlets are a traditional, old world tool used to bore holes in wood without splitting. They are extremely useful when creating pilot holes for screws, especially in tight spaces.
The tips are threaded with spiral cutting edges along the shafts
Tips are hardened. Black finish.
Made in France

Taytools 5" Ultimate Drill Press Sharpener for Woodworking Tools (Chisels & Plane Blades) - Includes Wooden Sharpening Jig & System for Flattening the Back of Chisels & Plane Irons.

Power Drill Bit Sharpeners
Taytools 5" Ultimate Drill Press Sharpener for Woodworking Tools (Chisels & Plane Blades) - Includes Wooden Sharpening Jig & System for Flattening the Back of Chisels & Plane Irons. Cover
Buy on Amazon Find on eBay
Revolutionize your sharpening process with our Drill Press Sharpening System. Say goodbye to dull chisels and inefficient sharpening methods. Engineered for precision and speed, this system is the most cost-effective solution for restoring razor-sharp edges to your woodworking tools.
Efficient and Cost-Effective Sharpening: Resharpen a dulled chisel in less than 20 seconds and restore a razor-sharp edge on even the most abused chisels in under 60 seconds.
Versatile Design: Designed to sharpen chisels and other blades up to 2" in width, it addresses most of the sharpening needs in the professional, amateur, and DIY workshop.
Arbor Mounting System: The heart of the system lies in the arbor that mounts acrylic discs in any drill press. Acrylic discs accept Cubiton II PSA sanding discs and a horsebutt leather strop for fast and efficient sharpening.
The kit includes precision-shaped grain sanding discs which are the fastest cutting and longest-lasting abrasives available. Horsebutt leather is the premium stropping material and provides a keen, sharp edge.
Ultimate Edition: Includes an assembled Red Oak jig with a 25° ramp and our "Chisel Back Flattening System" for flattening the backs of chisels and plane irons.

Taytools #5 Premium Bedrock Style Flattop Jack Plane Bench Plane - 14" Sole, 2" Wide Blade Cryo O1 Steel

Jack Planes
Taytools #5 Premium Bedrock Style Flattop Jack Plane Bench Plane - 14" Sole, 2" Wide Blade Cryo O1 Steel Cover
Buy on Amazon Find on eBay
Inspired by Stanley Bedrock Planes – Designed for superior rigidity, precision, and durability, ensuring high-performance smoothing with minimal chatter and tearout.
Premium Ductile Cast Iron Body & Frog – Provides maximum stability and longevity, with a precision-lapped sole for perfectly flat, accurate planing.
High-Quality Blade for Superior Edge Retention – 0.120"-thick, 2"-wide cryogenically treated O1 steel iron, hardened to 54-58 HRc for long-lasting sharpness and easy sharpening.
Advanced Frog Adjustment System – Inspired by the Stanley Bedrock design, allowing precise mouth adjustments without removing the iron for optimal shaving thickness and reduced tearout.
Perfectly Balanced for Finishing Tasks – Weighs 5 lbs and measures 14" long by 2-1/2" wide, ideal for fine finishing on softwoods, hardwoods, and figured grain.

Taytools 279144 One Piece 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

Sharpening Stones
Taytools 279144 One Piece 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System Cover
Buy on Amazon Find on eBay
This is a piece of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System
Float glass is dead flat and the perfect substrate to attach abrasive sheets
Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film
Comes with anti-slip pad
The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.

Taytools 106391 4 Piece Set 6” x 6” Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002”

Carpentry Squares
Taytools 106391 4 Piece Set 6” x 6” Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002” Cover
Buy on Amazon Find on eBay
These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002” (two thousandths of an inch) over the length of each arm.
Overall size is 6-inch x 6-inch. Leg thickness is 0.950 inch and leg width is 0.1.380 inch.
They come in sets of 4 each.

Taytools 12 Piece Set Glass Reinforced Nylon Clamping Assembly Set Contains Sizes 2” x 3-1/8”, 4” x 4” and 6” x 6” Guaranteed Square Within +/- 0.002”

Carpentry Squares
Taytools 12 Piece Set Glass Reinforced Nylon Clamping Assembly Set Contains Sizes 2” x 3-1/8”, 4” x 4” and 6” x 6” Guaranteed Square Within +/- 0.002” Cover
Buy on Amazon Find on eBay
These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002” (two thousandths of an inch) over the length of each arm.
Set contains 4 each of the following sizes: 2-inch x 3-1/8-inch, 4-inch x 4-inch and 6-inch x 6-inch.
They come in sets of 4 each.

Taytools 6" Ultimate Drill Press Sharpener for Woodworking Tools (Chisels & Plane Blades) - Includes Wooden Sharpening Jig & System for Flattening the Back of Chisels & Plane Irons

Power Drill Bit Sharpeners
Taytools 6" Ultimate Drill Press Sharpener for Woodworking Tools (Chisels & Plane Blades) - Includes Wooden Sharpening Jig & System for Flattening the Back of Chisels & Plane Irons Cover
Buy on Amazon Find on eBay
Revolutionize your sharpening process with our Drill Press Sharpening System. Say goodbye to dull chisels and inefficient sharpening methods. Engineered for precision and speed, this system is the most cost-effective solution for restoring razor-sharp edges to your woodworking tools.
Efficient and Cost-Effective Sharpening: Resharpen a dulled chisel in less than 20 seconds and restore a razor-sharp edge on even the most abused chisels in under 60 seconds.
Versatile Design: Designed to sharpen chisels and other blades up to 2" in width, it addresses most of the sharpening needs in the professional, amateur, and DIY workshop.
Arbor Mounting System: The heart of the system lies in the arbor that mounts acrylic discs in any drill press. Acrylic discs accept Cubiton II PSA sanding discs and a horsebutt leather strop for fast and efficient sharpening.
The kit includes precision-shaped grain sanding discs which are the fastest cutting and longest-lasting abrasives available. Horsebutt leather is the premium stropping material and provides a keen, sharp edge.
Ultimate Edition: Includes an assembled Red Oak jig with a 25° ramp and our "Chisel Back Flattening System" for flattening the backs of chisels and plane irons.

Taytools 469560 Flat Bottom Spokeshave Fine Adjustment 2 Inches Wide High Carbon Blade RC 55-60 9-1/2 Inches Overall

Smoothing Planes
Taytools 469560 Flat Bottom Spokeshave Fine Adjustment 2 Inches Wide High Carbon Blade RC 55-60 9-1/2 Inches Overall Cover
Buy on Amazon Find on eBay
Flat bottom curved spokeshave with dual fine blade adjustment mechanism. Sole is 1” wide.
Made from tough ductile cast iron
Adjustment knobs are solid brass and screws are stainless steel
Blade is 2” wide and 0.0750” thick and made from tool steel and hardened and tempered to RHC 55-60
Weighs in at 14.5 ounces; Overall length is 9-1/2”

24 Inch Anodized Aluminum Straight Edge Guaranteed Straight to Within .001 Inches Over Full 24 Inches Length SE24

Aluminum Bars
24 Inch Anodized Aluminum Straight Edge Guaranteed Straight to Within .001 Inches Over Full 24 Inches Length SE24 Cover
Buy on Amazon Find on eBay
Guaranteed straight to within 0.001” (that's one thousandth of an inch!) over the entire 24” length
Anodized aluminum .0400” (7/16”) thick by 1.750” (1 ¾”) wide
Reference edge is machined flat and smooth
Contoured cross section for easy gripping
Hanging hole on one end

Taytools 776049 Removable Carpenter Framing Square Fence Anodized Aluminum 7-7/8 Inch long

Carpentry Squares
Taytools 776049 Removable Carpenter Framing Square Fence Anodized Aluminum 7-7/8 Inch long Cover
Buy on Amazon Find on eBay
This Removable Universal Carpenter's Square Fence will increase the usefulness and accuracy of any carpenter's framing square by providing a much more accurate reference surface.
The fence is easily attached to either arm of any framing square via two brass thumb screws.
Once attached, a framing square can be placed on a workpiece with one leg aligned with the material edge and it will stay in place without any external support. When attached, the fence also acts as a handle to give you a better grip in your square.
The fence has a 1 inch tall fence on one side, and when flipped has a narrower 1/4 inch high fence. Slot will accept squares up to 3/16 inch thick. Overall length is 7-7/8 inches.
Made from extruded and anodized aluminum.

Taytools 17 Compartment Large Parts Organizer Box - Dual Latch Portable Tool Box with Removeable Dividers for Storing Hardware, Screws, Bolts, Nails, Beads or Jewely

Tool Boxes
Taytools 17 Compartment Large Parts Organizer Box - Dual Latch Portable Tool Box with Removeable Dividers for Storing Hardware, Screws, Bolts, Nails, Beads or Jewely Cover
Buy on Amazon Find on eBay
Versatile Organization: With 7 fixed compartments and 9 removable dividers, this organizer adapts to your storage needs, offering a total of 17 compartments. The small parts organizer measures 14-3/4” x 11-1/2” x 2-1/2” and is the perfect compact size for storing hardware, screws, bolts, toys, tackle, craft supplies, beads, or jewelry.
Durable Construction: Crafted from durable polypropylene plastic, this organizer case is built to withstand everyday wear and tear, ensuring your contents remain protected and secure in their bins, from job sites to offices.
Secure Storage and Transportation: Dual latches on the lid snap securely, preventing contents from shifting between compartments or trays during transportation. A built-in ergonomic handle makes it easy to carry this toolbox from one location to another.
Stackable Design: Indentations in the lids facilitate secure stacking of multiple organizers, optimizing storage space. Additionally, side latches enable fastening of multiple boxes together for small or large organizing projects.
Transparent, Impact-Resistant Lid: The transparent lid allows for easy identification of contents in their containers, while the impact-resistant design ensures durability. Managing multiple storage cases is made simple with clear visibility.

Taytools 106390 4 Piece Set 4” x 4” Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002”

Carpentry Squares
Taytools 106390 4 Piece Set 4” x 4” Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002” Cover
Buy on Amazon Find on eBay
These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002” (two thousandths of an inch) over the length of each arm.
Overall size is 4-inch x 4 inch. Leg thickness is 0.600 inch and leg width is 0.940 inch.
They come in sets of 4 each.

Taytools 469607 Jack Smoothing Bench Hand Plane #5, 14-1/4 Inch Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote

Smoothing Planes
Taytools 469607 Jack Smoothing Bench Hand Plane #5, 14-1/4 Inch Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote Cover
Buy on Amazon Find on eBay
Body and frog made from nearly indestructible ductile cast iron
Tote and knob are made from premium grade oiled and hand-rubbed Sapele
Iron is 0.120” thick and 2” wide and made from tool steel hardened and tempered to 55-60
Sole precision ground to within the British Standard of 0.003” over the entire length
Overall length 14-1/4" and 2-1/2" wide, overall weight 5.45 pounds

Taytools 5" Drill Press Sharpener for Woodworking Tools (Chisels & Plane Blades) comes with Steel Arbors, Acrylic Discs, PSA Abrasive Discs, Horsebutt Leather, & Honing Compound

Sharpening Stones
Taytools 5" Drill Press Sharpener for Woodworking Tools (Chisels & Plane Blades) comes with Steel Arbors, Acrylic Discs, PSA Abrasive Discs, Horsebutt Leather, & Honing Compound Cover
Buy on Amazon Find on eBay
Revolutionize your sharpening process with our Drill Press Sharpening System. Say goodbye to dull chisels and inefficient sharpening methods. Engineered for precision and speed, this system is the most cost-effective solution for restoring razor-sharp edges to your woodworking tools.
Efficient and Cost-Effective Sharpening: Resharpen a dulled chisel in less than 20 seconds and restore a razor-sharp edge on even the most abused chisels in under 60 seconds.
Versatile Design: Designed to sharpen chisels and other blades up to 2" in width, it addresses most of the sharpening needs in the professional, amateur and DIY workshop.
Arbor Mounting System: The heart of the system lies in the arbor that mounts acrylic discs in any drill press. Acrylic discs accept Cubiton II PSA sanding discs and a horsebutt leather strop for fast and efficient sharpening.
The kit includes precision-shaped grain sanding discs which are the fastest cutting and longest-lasting abrasives available. Horsebutt leather is the premium stropping material and provides a keen, sharp edge.
Custom Sharpening Jig: Each kit includes links to detailed instructions and jig plans for fabricating a custom sharpening jig.

Taytools 777077 Number 71 Full SIze Router Plane, Closed Throat, 3/8” Square Cutter, Ductile Cast Iron Body

Smoothing Planes
Taytools 777077 Number 71 Full SIze Router Plane, Closed Throat, 3/8” Square Cutter, Ductile Cast Iron Body Cover
Buy on Amazon Find on eBay
This router plane is modeled after the vintage Stanley No. 71 which was in production from 1884 until 1974. It is the perfect tool for refining dados, rabbets and tenons, and for cutting shallow mortises for hardware, inlays or any task requiring precise depth control
The body of this plane is made from nearly indestructible, seasoned, ductile cast iron. The closed throat design provides optimal support in front of the blade, and while working along the edge of workpieces when refining rabbets and tenons
The plane has good mass at 2 lbs 4 oz for powering through cuts. The base has been lapped flat to within +/- .001 inch (one thousandth of an inch)
The 3/8” square cutter is made from hardened tool steel and hardened to HRC 55-60 and will not rotate in use. The cutter can be turned 180 degrees to face the back of the plane to allow work in tight spaces. The blade is square to prevent rotation in use.
The micro adjust depth control allows a precise depth of cut. Maximum depth of cut is 1” with depth stop removed.
The cutter requires honing before use
The removeable fence can be placed on either side of the blade and can be used on straight or curved pieces.
Fine thread depth control, blade lock and depth stop hardware are all solid brass.
The 1-5/8” diameter by 2” tall sapele handles provide lower center of gravity for better control

Taytools 469614 Smoothing Bench Hand Plane #4, 9-3/4 Inch Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote

Smoothing Planes
Taytools 469614 Smoothing Bench Hand Plane #4, 9-3/4 Inch Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote Cover
Buy on Amazon Find on eBay
Body and frog made from nearly indestructible ductile cast iron
Tote and knob are made from premium grade oiled and hand-rubbed Sapele
Iron is 0.120” thick and 2” wide and made from tool steel hardened and tempered to 55-60
Sole precision ground to within the British Standard of 0.003” over the entire length
Overall length 9-3/4 inches and 2-1/2 inches wide, overall weight 4.11 pounds

Taytools FAQs

Yes, Taytools is a legitmate brand on Amazon. After conducting a comprehensive analysis of 2,221 customer reviews for Taytools products on Amazon, we have determined its average rating. With a strong performance and good quality, Taytools has received an average rating of 4.6 from numerous buyers, indicating that Taytools are trustworthy and live up to their claims. Therefore, it is safe to make purchases from Taytools on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Taytools and want to find more Taytools products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Taytools in the search box and hit Enter to see the search results.
  3. Find and click the correct Taytools to go to the new page.
  4. Select the products you want in the Taytools buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Taytools products.

We analyze millions of Taytools products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 306 Taytools products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Taytools page.
  2. Select the product you want in the Taytools buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Taytools 106392 4 Piece Set 8” x 8” Glass Reinforc..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the Taytools products are produced by Taylor Toolworks and Taylor Toolworks LLC. The manufacturers provide Taytools with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the Taytools products, helping you make more informed buying decisions. We recommend best choices of the products from the Taytools brand, helping you make better shopping choices with less time and energy.

Similar Brands

WORKPRO thumbnail
WORKPRO
HERZO thumbnail
HERZO
Toolcool thumbnail
Toolcool
Metabo thumbnail
Metabo
Dastool thumbnail
Dastool
Freud thumbnail
Freud
Wells Lamont thumbnail
Wells Lamont
Micro-Mark thumbnail
Micro-Mark
ROK Power Tools thumbnail
ROK Power Tools
CHICAGO ELECTRIC thumbnail
CHICAGO ELECTRIC
EX ELECTRONIX EXPRESS thumbnail
EX ELECTRONIX EXPRESS
Rok thumbnail
Rok
THORVALD thumbnail
THORVALD
RVEFOT thumbnail
RVEFOT
Kimllier thumbnail
Kimllier
MOKOVI thumbnail
MOKOVI