Best Sway Bar Bushings of 2026

"I replaced my worn-out bushings with these and noticed a huge improvement in steering stability and overall truck handling. They were a perfect fit for my 36mm sway bar and installed easily in about 30 minutes. The vibration and uneven tire wear are gone—definitely worth it!"

"On my 2011 Chevy Silverado, these bushings were super easy to install, taking just about five minutes per side. The quality feels excellent and they’re a great fix if your stock parts are worn out."

"I learned the hard way that you must measure your sway bar diameter before buying—my truck was listed for multiple sizes. Once I got the correct fit, these bushings worked perfectly."

"These bushings fit my 1996 Chevrolet C1500 like a glove and were a big step up from the worn-out originals. Polyurethane construction feels much sturdier than OEM rubber, and the price is fantastic. If you enjoy DIY projects, installation is a breeze—just make sure you get the right size. Loving the improvements so far!"

"I recently put the MOOG K6439 kit on my Silverado 1500, and I’m seriously impressed. Ride quality improved instantly—there’s less body roll and the truck feels a lot more stable. They’re clearly built to last and the install went off without a hitch. For anyone looking to tighten up their suspension, this is a great value upgrade."

"I tried to use these MOOG bushings on my GMC Sierra 2500HD 2006, but unfortunately, the size wasn’t quite right despite Amazon saying it would fit. Just a heads-up: always measure your sway bar diameter before ordering. The quality is solid, but check your sizes!"

"I noticed the rubber quality is solid and it fit perfectly with the OEM nuts on my front sway bar stabilizer. I’ll probably buy extras for the rear set."

"These are much better than regular rubber ones and really made my front end feel tighter. Installation was a bit of a hassle, but the results are worth it."

"I had to do a little sanding to start the nut, but overall, the quality is high and the price is great. I’d definitely recommend them."

"I recently installed these on my 1999 Jeep Sahara, and I was impressed with the fit, even after years of wear on the sway bar. The bushings feel really durable and weren't hard to install at all, though I did need a pry tool and some patience because they're quite stiff. The end result is great—they look and feel solid."

"After putting these on my 2003 TJ, my sway bar no longer flops around, and those mysterious banging noises are gone. Installation was quick and straightforward. The improvement in ride quality is definitely noticeable."

"I've used these bushings on all my Jeeps and they never disappoint. They're way sturdier than the original rubber ones and always fit perfectly. In my experience, aftermarket parts like these easily outperform factory options."

"I found these bushings to be a great fit for my 2006 Ram. The installation was straightforward, and I saved a lot by doing it myself. Plus, I appreciate that they're made in the USA."

"These bushings are of very good quality and arrived sooner than expected. I highly recommend them due to the excellent service."

"The fit was perfect and they replaced my worn-out bushings without any issues. The ride has been quiet so far, and the install was a breeze."

"I was impressed by how quick and simple the installation was on my 2005 Sequoia. The bushings fit perfectly and have made a noticeable difference in how the vehicle handles. Everything works great now."

"I installed these on my 2002 Sequoia and instantly noticed better ride quality and cornering performance. While they're a mix of urethane and rubber, I wish they came with silicone grease—luckily, I had some on hand. Overall, I'm really satisfied with the improvement."

"As someone who does a lot of off-roading, I’ve found that Moog bushings last much longer than the stock rubber kind. The fit was easy, the price was fair, and the ride stability is much better now. I definitely notice the difference in handling."

"I tried some cheaper bushings before, but MOOG fit my truck perfectly. I definitely recommend spending a bit more for these."

"After putting these on my 2000 F350 4x4 with the 7.3L Powerstroke, the annoying clunking up front disappeared! Super happy with the result."

"I had to do a slight modification to the bracket to get them on, but once installed, these bushings are holding up really well and made a big difference for my truck."

"I found the product to be a perfect fit and simple to install. However, I had a bit of trouble with the FedEx delivery, since it arrived despite my vacation hold. Thankfully, nothing went missing."

"At first, I thought the fit was off, but then realized it's meant to be very tight. Just be aware—avoid using the stud or your socket might get stuck."

"This part fit and worked exactly as needed for my 2004.5 Chevy Silverado 2500HD extended cab 4x4 LLY."

"After installing these on my old Jeep XJ, I noticed a huge improvement in ride comfort. The difference compared to my worn-out bushings was remarkable, and the job itself wasn't too tough. If you drive on rough roads and notice clunking or a harsh ride, replacing the bushings is a smart, inexpensive fix."

"I bought these for my stock 2001 Jeep XJ and they fit perfectly. Installation was a breeze and, best of all, the annoying sway bar noises disappeared completely."

"Ordered these for my 1997 Jeep Grand Cherokee to replace the front stabilizer bar bushings. They turned out to be a spot-on fit and worked exactly as expected. No complaints here!"

"I was impressed with the fast shipping and solid quality of these parts. Now my truck is finally back on the road, and everything is running smoothly."

"Installing these was a bit of a challenge, but once they were on, they've been completely silent—no squeaks, clunks, or rattles. Definitely worth the effort!"

"I've had these on my 03 TJ Rubicon for a year. They still do the job well and the price was great. The finish has faded a bit, but that doesn't affect performance."