Basic Information to Help You Figure out the Best Makita Impact Wrenches
Torque range and Screw Size
Torque is important to ensure the recommended bonding force. It corresponds to approximately 62% of the tractive force. Makita impact wrenches are usually specified depending on the size or torque capacity of the screw. Regarding the size, the diameter of the screw thread is used as the base, not the hexagonal head of the screw.
Size of Square
In general, the square size of the shaft of an impact wrench should be equal to or greater than the diameter of the screw thread. They can vary between 1/2 inches, ¾ inches, 3/8 inches, 1 inch, etc.
Weight and Intensity
Weight influences ergonomic factors, increasing or reducing risks of injuries, absences, and productivity. Intensity means the number of hours per day the tool will be used.
Durability will directly impact maintenance and, consequently, productivity. If the compressed air network is under ideal conditions of use, tightening and loosening should be done for 1 to 4 seconds, to ensure greater tool durability, otherwise, a tool with greater capacity is recommended.
Ergonomics
Convenience is an aspect that should not go unnoticed when it comes to the search for the Makita impact wrench. Among other things because no matter how much power the product has, if you cannot hold it comfortably or if it is too heavy, it can end up being useless, because it will be uncomfortable and will tire you out much more quickly.
Therefore, the important element that you should look for in your impact wrench should be ergonomics as in the previous point, we told you to consider weight. Logically, because it is a hand tool, this weight should be as adjusted as possible to your way of operating, resulting in a comfortable use in your work. Consider that size also affects the anvil and power, so choose carefully.
Anvil Type
It is common to fall into the error of thinking that the larger the size of the nozzle, the better the impact wrench, but this relationship is not always real. When it comes to Makita Impact Wrenches, you must choose the most suitable anvil for each type of work. Depending on the function of the anvil or the nozzle, you can add a few different sizes of wrenches.
Pay attention to the type of use you are thinking of making your impact wrench and choose your anvil according to them. For example, for common or domestic use, the best you can look for are ¼ inches or ½ inches anvils, these sizes adapt to the most commonly used models and with them, you can change the car tires or work with the most common shapes of screws.