Best Home Automation Modules for Z-Wave of 2026

The Zooz Z-Wave Long Range Module is designed for users with advanced knowledge in home automation and programming. It offers extended wireless coverage up to one mile, letting you control devices across larger areas with ease. To fully use its long-range capabilities, your home automation software and devices must support this new Z-Wave Long Range technology. This module adds both Z-Wave Plus and Long Range features to your DIY smart home setup, especially when used with a Raspberry Pi or Home Assistant Yellow (sold separately). Follow the included detailed instructions and compatible software guides to get your system up and running smoothly.

The Shelly Wave Shutter is a smart Z-Wave controller designed to automate your roller shutters, blinds, and other motorized window coverings. It lets you control these devices remotely, so you can adjust your curtains or awnings from anywhere using your smartphone or tablet. This device also measures power usage, helping you monitor energy consumption. It works with any Z-Wave gateway, making it easy to add to your existing smart home system. Plus, you can schedule your curtains to open or close at specific times, creating the perfect lighting and ambiance throughout your day without lifting a finger.

The Eaton Z-Wave Smart Plug allows you to control your devices easily using voice commands or an app when connected to a compatible Z-Wave controller or Eaton’s home automation hub. This means you can turn your appliances on or off remotely, adding convenience to your daily routine. You can link this smart plug with up to four other devices, making it simple to create a network of connected gadgets that work together. Plus, it offers wireless control over one outlet, while the other outlet remains always powered, so you can keep essential devices running without interruption.

The Zooz Smart Relay enhances your home automation by integrating Z-Wave technology into your existing wall switches. You can control lights or other devices while keeping your original switch style. This relay is compatible with 3-way setups, allowing you to install it even in locations without a neutral wire. Installation is straightforward with convenient pigtail wires, fitting easily into tight spaces. Plus, it features a smart bulb mode that lets you manage smart bulbs without cutting off power, ensuring seamless operation even when the lights are off.

The Home Assistant Connect ZWA-2 is a smart hub designed to link your Z-Wave devices effortlessly. With its precisely tuned antenna and base, it ensures a strong and reliable connection, helping you control your devices without interruptions. It features the latest 800-series Z-Wave chipset, so you can use all current Z-Wave gadgets with confidence. Unlike other wireless options that share crowded airspace, this device uses a unique frequency that better penetrates walls and reduces interference, making it ideal for busy homes. Plus, its long-range capability means you can connect devices even in far corners of your house, ensuring smooth and responsive control throughout.

The GoControl Z-Wave Module is a smart plug-in device that allows you to remotely control connected appliances. Simply plug the module into a wall outlet and connect your appliance to it. With this module, you can easily turn on or off your appliance using a Z-Wave controller. It can also work as a wireless repeater to ensure smooth communication between Z-Wave devices within a 100-foot range. The device features two power receptacles, one controlled and one pass-through, providing convenience and flexibility in managing your appliances.

The Eaton Z-Wave Smart Plug offers a convenient way to control your home electronics wirelessly. Each pack includes four plug-in modules, making it easy to manage multiple devices at once. One outlet on each module can be controlled remotely, while the other remains always on, so you can keep essential devices powered without interruption. You can also connect the plug to up to four other devices, allowing you to create a simple smart home network. Plus, with compatible Z-Wave controllers or Eaton’s home automation hub, you can control your plugs using voice commands or an app, adding comfort and ease to your daily routine.

The Schlage Dimmer Module is a Z-Wave enabled plug-in dimmer that extends the reach of Nexia Home Intelligence system up to 200 additional feet. This product allows you to reduce energy use and save money by turning off lights and small appliances. You can also set it to automatically trigger ''lights on'' with a Schlage Home Keypad Lock when you enter your code at the door. To utilize the great features of remote access and control, a monthly subscription of $9.99 is required. This product works with incandescent table and floor lamps, and you can use the Schlage Home Appliance Module for lamps with CFL bulbs. With the Schlage Dimmer Module, you can enjoy the convenience of controlling your lights and appliances remotely while saving energy and money.

The Shelly Wave Z-Wave Sensor is a long-range device that helps you monitor doors and windows with ease. It can detect when they open or close and also measures the tilt angle, giving you detailed information for better security. The sensor includes a light detector that can trigger smart home actions based on lighting conditions, adding convenience to your daily routines. It works with any Z-Wave gateway and supports communication over long distances, up to 1.5 miles, which means you can protect larger properties without losing connection. With this sensor, you get reliable security and smart automation in one device.

The Alfred DB2- Z Wave Plus Module Accessory enables connection of all DB2 Smart Lock Models to 3rd party Hubs using Zwave Plus technology. It connects to Smart Home Hubs like SmartThings and Vera, using the Z Wave Plus US Frequency. Installation is easy, just pop the Z-Wave module into the interior escutcheon of your Alfred lock.