GROOVE 'N TURN

4.9

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, GROOVE 'N TURN has 306 products for sale. GROOVE 'N TURN products range in price from $54.3 to $214, and the average price of all the products is about $97.35.

We found that most of the GROOVE 'N TURN products are manufactured by Kaiser Tool Company, Inc.. The manufacturer provides GROOVE 'N TURN with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase GROOVE 'N TURN products from the seller Kaiser-THINBIT. The brand holds an average rating of 4.85, testifying to its excellent reputation.

GROOVE 'N TURN Best Sellers

Last Updated: Jan 8, 2026

THINBIT LGS34R 3/4 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

Grooving Part Off Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Use with Right Hand Inserts.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT L450101R 1", Right Hand Orientation, 45 Degree, GROOVE 'N TURN toolholder. Use with face Grooving Inserts

Turning Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC and conventional machines. Toolholder includes: Q Clamp, S3808 Screw, W1005 Wrench and C0509 Pin.

This toolholder must be used with face grooving inserts. Please note that insert depth of cut will be reduced depending on application angle. See compatible inserts in downloads section.

Use with Left hand counter-clockwise inserts. Clockwise rotation (M04) requires a custom insert.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT 3 Pack LGOR095D5CR010 'L' Series, Uncoated Carbide, Static O-Ring Grooving Insert for Non-Ferrous alloys, Aluminium, Plastic Without Interrupted cuts.

Internal Grooving Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Uncoated DURA-MAX 5000 carbide Static O-Ring grooving insert for non-ferrous alloys, aluminium, plastic without interrupted cuts.

Use with Large Series toolholders.

.095" tip width with .010" corner radii. 7 degree included angle. .250" depth of cut. Internal grooving with 1.250" minimum bore.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT LGS01R 1 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

Grooving Part Off Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Use with Right Hand Inserts.

U.S. Patent 6,688,816 and 6,824,333.

3 Pack LGT040HSR, .040" Width, .100" Depth, Uncoated high Speed Steel, Sharp Corner, THINBIT Grooving Insert for Plastics, Composites, Abrasive Cutting Conditions and Low RPM Cutting

Parting Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter.

Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.

Uncoated high speed steel grooving insert for plastics, composites, abusive cutting conditions and low RPM cutting.

Use with Large series toolholders. Use RH straight or LH 90 degree.

THINBIT LGS38R 3/8 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

Grooving Part Off Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Use with Right Hand Inserts.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT LGS12R 1/2 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

Grooving Part Off Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Use with Right Hand Inserts.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT LGS01L 1 inch, Left Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

Grooving Part Off Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: Y Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Use with Left Hand Inserts.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT 3 Pack LGPT045D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

Parting Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04.

Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500".

Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts.

Use with Large series toolholders. Use RH straight or LH 90 degree toolholder.

3 Pack LGT125D2L, .125" Width, .250" Depth, Uncoated Carbide, Sharp Corner, THINBIT Grooving Insert for Steel, cast Iron and Stainless Steel with Interrupted cuts

Parting Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Cuts up to .250" deep. Can be used for parting stock up to .500". Cuts flush to collet face or shoulder of larger diameter.

Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.

Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large series toolholders. Use LH straight or RH 90 degree.

THINBIT LR3406 3/4 inch Diameter, Round Internal toolholder. Reversible for Left or Right Hand Orientation. Use with Grooving, Turning, chamfering and Threading Inserts.

Threading Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: C Clamp, S3808 Screw, W1005 Wrench and P0305 Pin.

This toolholder is compatible with grooving, turning, chamfering and threading inserts. Use inserts beginning with 'L'.

When used for cutting undercuts along an internal shoulder, select: Left hand inserts for M03 rotation or Right hand inserts for M04 rotation.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT LGSF01R 1 inch, Right Hand or Left Hand Orientation, 90 Degree toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

Grooving Part Off Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC and conventional machines. Toolholder includes: C Clamp, S3808 Screw, W1005 Wrench and P0312 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Use with LH inserts For M03 rotation. Use with RH inserts For M04 rotation.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT 3 Pack LGAT04D2R 'L' Series, Uncoated Carbide, Acme Threading Insert for 4 TPI in Steel, cast Iron and Stainless Steel with Interrupted cuts.

Threading Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Uncoated DURA-MAX 2000 carbide Acme threading insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large Series toolholders.

4 TPI (threads per inch). 29 degree included angle. Right Hand orientation for threading within .070" of a shoulder. Internal threading with 1.250" minimum bore.

U.S. Patent 6,688,816 and 6,824,333.

3 Pack LGT024D2RFR, .024" Width, .072" Depth, Uncoated Carbide, Full Radius, THINBIT Grooving Insert for Steel, cast Iron and Stainless Steel with Interrupted cuts

Parting Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Cuts up to .072" deep. Can be used for parting stock up to .144". Cuts flush to collet face or shoulder of larger diameter.

Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.

Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large series toolholders. Use RH straight or LH 90 degree.

3 Pack LGT050D2R, .050" Width, .125" Depth, Uncoated Carbide, Sharp Corner, THINBIT Grooving Insert for Steel, cast Iron and Stainless Steel with Interrupted cuts

Internal Grooving Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Cuts up to .125" deep. Can be used for parting stock up to .250". Cuts flush to collet face or shoulder of larger diameter.

Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.

Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large series toolholders. Use RH straight or LH 90 degree.

3 Pack LGT040D2R, .040" Width, .100" Depth, Uncoated Carbide, Sharp Corner, THINBIT Grooving Insert for Steel, cast Iron and Stainless Steel with Interrupted cuts

Internal Grooving Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter.

Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.

Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large series toolholders. Use RH straight or LH 90 degree.

THINBIT 3 Pack LGAT05D2R 'L' Series, Uncoated Carbide, Acme Threading Insert for 5 TPI in Steel, cast Iron and Stainless Steel with Interrupted cuts.

Threading Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Uncoated DURA-MAX 2000 carbide Acme threading insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large Series toolholders.

5 TPI (threads per inch). 29 degree included angle. Right Hand orientation for threading within .070" of a shoulder. Internal threading with 1.250" minimum bore.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT 3 Pack LGAT06D2R 'L' Series, Uncoated Carbide, Acme Threading Insert for 6 TPI in Steel, cast Iron and Stainless Steel with Interrupted cuts.

Threading Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Uncoated DURA-MAX 2000 carbide Acme threading insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large Series toolholders.

6 TPI (threads per inch). 29 degree included angle. Right Hand orientation for threading within .070" of a shoulder. Internal threading with 1.250" minimum bore.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT LGS58R 5/8 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

Threading Holders

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Use with Right Hand Inserts.

U.S. Patent 6,688,816 and 6,824,333.

THINBIT 3 Pack LGTTD2R 'L' Series, Uncoated Carbide, Threading Insert for 8 to 56 TPI in Steel, Cast Iron and Stainless Steel with Interrupted Cuts

Threading Inserts

Buy on Amazon Find on eBay

See Downloads section below item photos for detailed product information, technical information and compatible toolholders.

Uncoated DURA-MAX 2000 carbide threading insert for steel, cast iron and stainless steel with interrupted cuts.

Use with Large series toolholders.

8 to 56 TPI (threads per inch). 60 degree included angle. Right Hand orientation for threading within .065" of a shoulder. Internal threading with 1.250" minimum bore.

U.S. Patent 6,688,816 and 6,824,333.

GROOVE 'N TURN FAQs

Is GROOVE 'N TURN Legit?

Yes, GROOVE 'N TURN is a legitmate brand on Amazon. After conducting a comprehensive analysis of 21 customer reviews for GROOVE 'N TURN products on Amazon, we have determined its average rating. With a strong performance and good quality, GROOVE 'N TURN has received an average rating of 4.85 from numerous buyers, indicating that GROOVE 'N TURN are trustworthy and live up to their claims. Therefore, it is safe to make purchases from GROOVE 'N TURN on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more GROOVE 'N TURN products?

If you're interested in GROOVE 'N TURN and want to find more GROOVE 'N TURN products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type GROOVE 'N TURN in the search box and hit Enter to see the search results.
Find and click the correct GROOVE 'N TURN to go to the new page.
Select the products you want in the GROOVE 'N TURN buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more GROOVE 'N TURN products.

How does findthisbest choose the top GROOVE 'N TURN products?

We analyze millions of GROOVE 'N TURN products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase GROOVE 'N TURN products via FindThisBest?

Go to the GROOVE 'N TURN page.
Select the product you want in the GROOVE 'N TURN buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product THINBIT LGS34R 3/4 inch, Right Hand Orientation, S..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the GROOVE 'N TURN products?

Most of the GROOVE 'N TURN products are produced by Kaiser Tool Company, Inc.. The manufacturer provides GROOVE 'N TURN with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the GROOVE 'N TURN products, helping you make more informed buying decisions. We recommend best choices of the products from the GROOVE 'N TURN brand, helping you make better shopping choices with less time and energy.

Similar Brands

Uxcell

Accusize Industrial Tools