CEL Scientific feature image

CEL Scientific

Review rating Review rating Review rating Review rating Review rating 4.2
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, CEL Scientific has 39 products for sale. CEL Scientific products range in price from $30 to $850, and the average price of all the products is about $179.53.

We found that most of the CEL Scientific products are manufactured by CEL Scientific Corporation. The manufacturer provides CEL Scientific with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase CEL Scientific products from the seller CEL Scientific Corp.. The brand holds an average rating of 4.2, testifying to its excellent reputation.

CEL Scientific Best Sellers

Last Updated: Jan 11, 2025

Tedlar Bag 1L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10)

Lab Sample Bags
Tedlar Bag 1L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag)

Tedlar Bag 5L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10)

Lab Sample Bags
Tedlar Bag 5L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 5 Liter - Size: 16'' x 10'' - Material: 2 mil Tedlar PVF film, Polypropylene Fitting - MADE IN USA
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag)

Tedlar PVF Gas Sampling Bag 0.5L 1L 3L - Pack of 10 - Air Sampling Bag - Polypropylene/Stainless Steel/PTFE fitting - valve (1 Liter, polypropylene fitting)

Lab Sample Bags
Tedlar PVF Gas Sampling Bag 0.5L 1L 3L - Pack of 10 - Air Sampling Bag - Polypropylene/Stainless Steel/PTFE fitting - valve (1 Liter, polypropylene fitting) Cover
Buy on Amazon Find on eBay
Capacity: 0.5 Liter, 1 Liter, 3 Liter
Size: 5'' x 9'', 7'' x 9'', 13'' x 9''
Material: 2 mil Tedlar PVF film
Use: Indoor/outdoor air sampling, hazardous waste sites, leaking underground storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and most other gas sampling needs.
Made in USA

Tedlar Bag 10L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10)

Lab Sample Bags
Tedlar Bag 10L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 10 Liter - Size: 14.5'' x 18'' - Material: 2 mil Tedlar PVF film, Polypropylene Fitting - MADE IN USA
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag)

Tedlar Bag 0.5L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10)

Lab Sample Bags
Tedlar Bag 0.5L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 0.5 Liter - Size: 5'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines : 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag)

Tedlar Bag 25L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve

Lab Sample Bags
Tedlar Bag 25L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve Cover
Buy on Amazon Find on eBay
Capacity: 25 Liter - Size: 26'' x 18'' - Material: 2 mil Tedlar PVF film, Polypropylene Fitting - MADE IN USA
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag)

Foil Bag 1 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10)

Lab Gas Handling Instruments
Foil Bag 1 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 1 Liter
Size: 7'' x 9''
Material: metalized polyester & polyethylene bonded film, 4.4 mil
Fitting: polypropylene 2-in-1 fitting
MADE IN USA

CEL Scientific Stainless Steel Soil Sampling Liner 2'' x 6'' (Pack of 100)

Lab Samplers
CEL Scientific Stainless Steel Soil Sampling Liner 2'' x 6'' (Pack of 100) Cover
Buy on Amazon Find on eBay
Size: 2'' x 6''
Wall Thickness: 1 mm
Material: Stainless Steel
Quantity: 100 liners per pack

Disposable Polyethylene Bailer Weighted 1.5'' OD x 18'' - Water Sampling (Pack of 24)

Lab Samplers
Disposable Polyethylene Bailer Weighted 1.5'' OD x 18'' - Water Sampling (Pack of 24) Cover
Buy on Amazon Find on eBay
Check valve design provides leak-free operation
Threaded release tip attaches with ease and regulates flow into sample containers (no special tips needed!)
Easy-thread top also prevents cordage from touching and contaminating inside of bailer
Extra wide bottom nozzle for faster sinking

Foil Bag 5 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10)

Lab Gas Handling Instruments
Foil Bag 5 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 5 Liter
Size: 16'' x 10''
Material: metalized polyester & polyethylene bonded film, 4.4 mil
Fitting: polypropylene 2-in-1 fitting
MADE IN USA

Disposable Polyethylene Bailer Unweighted 1.5'' OD x 18'' - Water Sampling (Pack of 24)

Lab Samplers
Disposable Polyethylene Bailer Unweighted 1.5'' OD x 18'' - Water Sampling (Pack of 24) Cover
Buy on Amazon Find on eBay
Check valve design provides leak-free operation
Threaded release tip attaches with ease and regulates flow into sample containers (no special tips needed!)
Easy-thread top also prevents cordage from touching and contaminating inside of bailer
Extra wide bottom nozzle for faster sinking

Foil Bag 3 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10)

Lab Gas Handling Instruments
Foil Bag 3 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 3 Liter
Size: 10'' x 12''
Material: metalized polyester & polyethylene bonded film, 4.4 mil
Fitting: polypropylene 2-in-1 fitting
MADE IN USA

End Caps 2.5" for Stainless Steel and Brass Soil Sampling Liners (Pack of 100)

Soil Sample Probes
End Caps 2.5" for Stainless Steel and Brass Soil Sampling Liners (Pack of 100) Cover
Buy on Amazon Find on eBay
Diameter: 2.5''
Color: Red
Material: Polyethylene
Quantity: 100 caps per pack

Foil Bag 0.5 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10)

Lab Gas Handling Instruments
Foil Bag 0.5 L - Gas Sampling - Air Sampling - Polypropylene fitting valve (Pack of 10) Cover
Buy on Amazon Find on eBay
Capacity: 0.5 Liter
Size: 5'' x 9''
Material: metalized polyester & polyethylene bonded film, 4.4 mil
Fitting: polypropylene 2-in-1 fitting
MADE IN USA

Kynar Bag 100L - Air Sampling - Gas Sampling - 3 mil PVDF film - Polypropylene fitting valve

Poly & Plastic Packaging Bags
Kynar Bag 100L - Air Sampling - Gas Sampling - 3 mil PVDF film - Polypropylene fitting valve Cover
Buy on Amazon Find on eBay
Capacity: 100 Liter - Size: 40'' x 27'' - Material: 3 mil Kynar PVDF film - Made in USA
Our Kynar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines: 1. Store bags in a clean area away from potential contamination sources. 2. Kynar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing the Kynar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the film on the back side of the bag)

CEL Scientific Stainless Steel Soil Sampling Liner 2.5'' x 6'' (Pack of 64)

Lab Samplers
CEL Scientific Stainless Steel Soil Sampling Liner 2.5'' x 6'' (Pack of 64) Cover
Buy on Amazon Find on eBay
Size: 2.5'' x 6''
Wall Thickness: 1 mm
Material: Stainless Steel
Quantity: 64 liners per pack

CEL Scientific Stainless Steel Soil Sampling Liner 2.5'' x 1'' (Pack of 360)

Lab Samplers
CEL Scientific Stainless Steel Soil Sampling Liner 2.5'' x 1'' (Pack of 360) Cover
Buy on Amazon Find on eBay
Size: 2.5'' x 1''
Wall Thickness: 1 mm
Material: Stainless Steel
Quantity: 6 liners per canister, 60 canisters per pack

Tedlar Bag 100L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve

Lab Sample Bags
Tedlar Bag 100L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve Cover
Buy on Amazon Find on eBay
Capacity: 100 Liter - Size: 40'' x 27'' - Material: 2 mil Tedlar PVF film - MADE IN USA
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag)

Tedlar Bag 50L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve

Lab Sample Bags
Tedlar Bag 50L - Air Sampling - Gas Sampling - PVF film - Polypropylene fitting valve Cover
Buy on Amazon Find on eBay
Capacity: 50 Liter - Size: 26'' x 27'' - Material: 2 mil Tedlar PVF film - MADE IN USA
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon.
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (>2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases.
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight.
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag)

CEL Scientific FAQs

Yes, CEL Scientific is a legitmate brand on Amazon. After conducting a comprehensive analysis of 5 customer reviews for CEL Scientific products on Amazon, we have determined its average rating. Offering great value and satisfying quality, CEL Scientific has achieved a respectable rating of 4.2 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from CEL Scientific on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in CEL Scientific and want to find more CEL Scientific products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type CEL Scientific in the search box and hit Enter to see the search results.
  3. Find and click the correct CEL Scientific to go to the new page.
  4. Select the products you want in the CEL Scientific buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more CEL Scientific products.

We analyze millions of CEL Scientific products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 39 CEL Scientific products for sale, 19 of which were analyzed in detail and recommended to customers.

  1. Go to the CEL Scientific page.
  2. Select the product you want in the CEL Scientific buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Tedlar Bag 1L - Air Sampling - Gas Sampling - PVF..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the CEL Scientific products are produced by CEL Scientific Corporation. The manufacturer provides CEL Scientific with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the CEL Scientific products, helping you make more informed buying decisions. We recommend best choices of the products from the CEL Scientific brand, helping you make better shopping choices with less time and energy.

Similar Brands

HARRIS thumbnail
HARRIS
FORENSICS DETECTORS FD thumbnail
FORENSICS DETECTORS FD
INTBUYING thumbnail
INTBUYING
HiHydro thumbnail
HiHydro
Medline thumbnail
Medline
Wowfit thumbnail
Wowfit
Sukiise thumbnail
Sukiise
BT Lab Systems thumbnail
BT Lab Systems
QXNASU thumbnail
QXNASU
Sergi Lab Supplies thumbnail
Sergi Lab Supplies
YUXun YX thumbnail
YUXun YX
BorinGlass thumbnail
BorinGlass
Philadelphia Scientific thumbnail
Philadelphia Scientific
Tecglass & Instruments thumbnail
Tecglass & Instruments
Safe Home thumbnail
Safe Home
SCITUS KNOW, UNDERSTAND thumbnail
SCITUS KNOW, UNDERSTAND