FAG feature image

FAG

Review rating Review rating Review rating Review rating Review rating 4.6

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, FAG has 215 products for sale. FAG products range in price from $4.48 to $215, and the average price of all the products is about $49.34.

We found that most of the FAG products are manufactured by Schaeffler Technologies Co., Manufacturer, and FAG Bearings. The manufacturers provide FAG with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase FAG products from the seller SUN-BEARINGS. The brand holds an average rating of 4.64, testifying to its excellent reputation.

FAG Best Sellers

Last Updated: Jan 11, 2025
805097 Freightliner Mercedes Alliance Axle FAG Pinion Bearing & Race

FAG 6003-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 35mm OD, 10 mm Wide 14000rpm Maximum Rotational Speed, 731lbf Static Load Capacity, 1360lbf Dynamic Load Capacity

Deep groove geometry for high speeds and supporting both radial and axial loads
“Very Light” bearing design for use in limited space applications where shaft sizes are relatively large and the loads are not substantial
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

FAG 30207A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 35 mm ID, 72mm OD, 18.25mm Width, 10000rpm Maximum Rotational Speed

Cone (inner ring assembly) and cup (outer ring) combine to form a complete single tapered roller bearing
Supports high radial loads and axial loads in one direction between a rotating and non-rotating member
Operating temperatures range from -30 to 120 degrees C (-22 to 250 degrees F)
Sheet steel cage evenly spaces rollers for reduced friction, vibration, and noise
Open configuration for lubrication applied in place

FAG 6203 2RS Sealed Ball Bearing New

Type: Ball Bearing

FAG Bearings 6017-2ZR Single Row Radial Bearing, ABEC 1 Precision, Double Shielded, Steel Cage, Normal Clearance, Metric, 85mm ID, 130mm OD, 22mm Width, 4800rpm

Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy
Conforms to ABEC 1 precision standard for performance within a narrow range of variation
CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
Steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
Shields on both sides of the bearing for protection against contaminants

FAG 51106 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 30mm ID, 47mm OD, 11mm Width, 5600rpm Maximum Rotational Speed, 7500lbf Static Load Capacity, 3750lbf Dynamic Load Capacity

Single direction, deep-groove thrust ball bearing for applications that support heavy axial loads in one direction
Open bearing for lubrication applied in place
Through-hardened chromium steel for durability and resistance to deformity under heavy loads
Sheet steel retainer evenly spaces rollers for reduced friction, vibration, and noise
Grooved raceways for higher speeds and thrust-bearing capacity than flat washers

FAG Deep Groove Ball Bearings 6205 -C-2HRS (-2RSR) Inside 25mm Outside 52mm Width 15mm

Model : 6205 -C-2HRS (-2RSR)
FAG
Inside-Ø 25 mm Outside-Ø 52 mm
width 15 mm

FAG Bearings SINGLE ROW ANGULAR CONTACT BALL BEARINGS (7208-B-JP-UA)

6006-2RS FAG Ball Bearing 30x55x13 mm 6006-2RSR

FAG 6005-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 25mm ID, 47mm OD, 12 mm Wide 36000rpm Maximum Rotational Speed, 1470lbf Static Load Capacity, 2520lbf Dynamic Load Capacity

Deep groove geometry for high speeds and supporting both radial and axial loads
“Very Light” bearing design for use in limited space applications where shaft sizes are relatively large and the loads are not substantial
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Open bearing for lubrication applied in place

805096 Freightliner Mercedes Alliance Axle FAG Pinion Bearing & Race

805096 Freightliner Mercedes Alliance Axle FAG Pinion Bearing & Race

FAG Bearings NU305E-TVP2 Single Row Cylindrical Roller Bearing, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, Normal Clearance, 25mm ID, 62mm OD, 17mm Width

FAG cylindrical roller bearing with polyamide cage and removable inner ring suitable for high radial loads
CN (normal) radial clearance for applications where thermal expansion is not a factor
Single row roller bearing for high radial loads with low friction
Removable inner ring in open bearing allows for lubrication in place
Metric unit measurements for industry consistency

FAG 6306-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 30mm ID, 72mm OD, 19mm Width, 24000 rpm Maximum Rotational Speed, 3650 lbf Static Load Capacity, 6550 lbf Dynamic Load Capacity

Deep groove geometry for high speeds and supporting both radial and axial loads
“Medium” bearing design for average to above average radial loads and light to average axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Open bearing for lubrication applied in place

FAG 6207 Deep Groove Ball Bearing, Single Row, Open, Normal Clearance, Metric, 35mm Bore, 72mm OD, 17mm Width, 24000rpm Maximum Rotational Speed, 3440lbf Static Load Capacity, 5730lbf Dynamic Load Capacity

Single-row deep groove geometry for high speeds and supporting both radial and axial loads
Low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads
Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision
Open bearing for lubrication in place
Rotates up to 24,000

FAG 6305-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 25mm ID, 62mm OD, 17mm Width, 28000 rpm Maximum Rotational Speed, 2600 lbf Static Load Capacity, 5000 lbf Dynamic Load Capacity

Deep groove geometry for high speeds and supporting both radial and axial loads
“Medium” bearing design for average to above average radial loads and light to average axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Open bearing for lubrication applied in place

FAG FAQs

Yes, FAG is a legitmate brand on Amazon. After conducting a comprehensive analysis of 94 customer reviews for FAG products on Amazon, we have determined its average rating. With a strong performance and good quality, FAG has received an average rating of 4.64 from numerous buyers, indicating that FAG are trustworthy and live up to their claims. Therefore, it is safe to make purchases from FAG on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in FAG and want to find more FAG products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type FAG in the search box and hit Enter to see the search results.
  3. Find and click the correct FAG to go to the new page.
  4. Select the products you want in the FAG buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more FAG products.

We analyze millions of FAG products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 215 FAG products for sale, 16 of which were analyzed in detail and recommended to customers.

  1. Go to the FAG page.
  2. Select the product you want in the FAG buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product FAG 805097, you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the FAG products are produced by Schaeffler Technologies Co., Manufacturer, and FAG Bearings. The manufacturers provide FAG with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the FAG products, helping you make more informed buying decisions. We recommend best choices of the products from the FAG brand, helping you make better shopping choices with less time and energy.