Fluidhaus feature image

Fluidhaus

Review rating Review rating Review rating Review rating Review rating 4.5

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Fluidhaus has 53 products for sale. Fluidhaus products range in price from $15.6 to $1123, and the average price of all the products is about $211.43. You should take everyting into consideration before buying the products, after all, it is not a small expenditure for most consumers.

You can confidently purchase Fluidhaus products from the seller Fluidhaus. The brand holds an average rating of 4.5, testifying to its excellent reputation.

Fluidhaus Best Sellers

Last Updated: Jan 11, 2025

Hydraulic Valve Electric Solenoid, D03 (NG6) DIN Connector 21 GPM 4560 psi 12VDC 24VDC 110VAC 220VAC 3 Position, VSD6 series (T-A&B to Blocked and P to T in Center, 110VAC)

Universal type hydraulic electric operated solenoid mounts on readily available D03 (USA) or NG6 (International) sub plates and manifolds. Used to control the direction of hydraulic cylinders and motors. These robust valves are designed for original equipment manufacturers but can also be used to replace existing valves. There are many manufacturers that build to this universal style. Normally just confirm that the voltage, mounting pattern and spool configurations are the same before substituting.
Includes mounting bolts (M5x45mm long)
Rated IP65 for dust and water resistance.
Includes lighted DIN connector for each coil. LED illuminate's clear connector housing when power is supplied to the connector/coil.
Used in mobile, industrial. automation and construction equipment
Purchase Fluidhaus sub plate or manifold series SAS6 or MPA6 separately.
Solenoid Power: DC= 30 watts, AC = 50VA (220VA inrush)
Robust design proven in many high-volume original equipment manufacturers machines.
Valve can be mounted in any direction.
Upgrade from the following manufactures: Note: These are the basic model codes. Confirm the spool type symbol, voltage and electrical connector style. Eaton Vickers: DGV-3..... Hyvair: D03S-2..... Bosch Rexroth: 4WE6..... Continental: VSD03M..... Argo Hytos: RPE3 Double A Hydraulics Q03 Yuken: DSG.... Northman: SWH-G02

Universal Hydraulic Valve Mounting Sub Plate Aluminum D03 NG6 Cetop 3 Pattern SAE -8 Ports (1/2" Nominal Dimension Port), SA6 Series

Clear anodized aluminum for superior surface finish, better paint adhesion and stain resistance.
Uses M5-.08 thread for valve mount. The use of 10-24 threads found with many US valves can allow unsafe orientation of valve due to the smaller diameter. Therefore a locating pin is often needed with the 10-24 thread. We prefer the correct M5 thread.
Standard SAE -8 3/4-16 O-ring boss ports for a leak free system.
3000 PSI maximum Pressure
Note that one of the threaded valve mounting holes is offset less than 1mm to prevent mounting the valve in the wrong directions. If all bolts do not fit rotate the valve 180 degress and try again.

Hydraulic Low Speed High Torque Orbital Motor (250cc: Max: 3098 in-lbs 220rpm 1595 psi 14.5 gpm)

Fluiidhaus motors are professional grade motors used by many famous equipment manufacturers for reliable long life operation.
10.5 gpm max. input flow for 50cc size. 14.5 gpm max. for 100, 160, 250 and 500cc sizes
Thrust Needle bearings for radial and axial shaft load support with a compact design
Geroler design for smooth and efficient rotation. Internal spool valve for efficient oil distribution
Shaft can rotate clockwise or counterclockwise
High pressure shaft seal permits high back pressure from the low-pressure port (opposite of input pressure port). Up to 725psi continuously.

Hydraulic Power Unit 12VDC, 2.6hp 2kW, Valve mount options (2.0 GPM - 2100PSI Max., 3.1 gal. (12L))

2.6HP, 12VDC motor can run off a battery
Adjustable pressure setting
VSD6 Valve Options: https://www.amazon.com/dp/B098MZ836P?ref=myi_title_dp
SCO-D Valve stacking block options: Valve stacking blocks: https://www.amazon.com/dp/B0B1KVRLL5?ref=myi_title_dp&th=1
steel hydraulic tank.

Hydraulic Motor Orbital Low Speed High Torque (50cc (3cipr) Max.: 787in-lbs. 760rpm)

Fluiidhaus motors are professional grade motors used by many famous equipment manufacturers for reliable long life operation.
10.5 gpm max. input flow for 50cc size. 14.5 gpm max. for 100, 160, 250 and 500cc sizes
Thrust Needle bearings for radial and axial shaft load support with a compact design. Reference shaft load chart.
Geroler design for smooth and efficient rotation. Internal spool valve for efficient oil distribution
Shaft can rotate clockwise or counterclockwise
High pressure shaft seal permits high back pressure from the low-pressure port (opposite of input pressure port). Up to 725psi continuously.

Hydraulic Valve Stacking Blocks for Fluidhaus Power Unit SCO series, SCO-D Series Block (2 Valve Stations)

SAE -6 o-ring A and B hydraulic ports
Made from Aluminum, corrosion resistant
Use with any D03/NG6 mounting type valve
3000 psi rated

Hydraulic Electrical Solenoid Valve D03 (NG6) 21 GPM 4560 psi Wiring Box 3-Position Soft Shift 110VAC (Balers and Compactors) (C-All Ports Closed in Center Position)

Soft shift electronics reduce shifting time of solenoid.
Reduced system shock and in-rush current
Wiring terminal box with 1/2" conduit connection
Includes mounting bolts (M5x45mm long)
Often used in balers and compactors
Purchase Fluidhaus sub plate or manifold series SAS6 or MPA6 separately.
Operating temperature = -22֯F to 174֯F
Valve can be mounted in any direction.

Hydraulic Proportional Valve with On Board Electronics, Size D03 (11gpm) (+/- 10VDC, C Spool: All ports blocked in center)

Professional Grade for equipment manufacturers
Includes electronics mounted to valve. Simply provide a 24VDC power and set point signal either +/- 10VDC or 4-20mA
Proportionally control your hydraulic motor or cylinder speed or position with an electrical signal.
Includes 7-Pin electrical connector
Upgrade from: Rexroth 4WRAE6... series Continental VED03MG... series Eaton Vickers KBDG4V-3... series Parker D1FB...OBE series Code F0 or S0

Hydraulic Gear Pump Sizes from 0 to 18 gpm 3625psi SAE A Flange Side Ports CW-Rotation (Shaft: 5/8" Diameter keyed, 20cc: 15gpm at max. RPM)

IMPORTANT: MUST ROTATE SHAFT CLOCKWISE WHEN LOOKING AT THE SHAFT. IMPROPER ROTATION DIRECTION COULD LEAD TO SHAFT LEAKAGE AND SEAL FAILURE.
Universal hydraulic pump with very common SAE A mounting flange and standard shaft sizes. Bell housings and adapters for mounting, as well as, shaft couplings are readily available in the market. Used in demanding new applications and replacing existing pumps
Up to 3625 psi continuous pressure
Up to 18 gpm
Spline or Keyed shaft options
.SAE A, 2 bolt mounting flange

Hydraulic Directional Control Valve D03 (NG6) Cetop 3 Manual Lever Operated 21 GPM 4560 psi (D-Detent Hold, M-3 Position A&B to Tank, P blocked in center)

Universal hydraulic valve design mounts to readily available in the market sub plates and manifolds for threaded hydraulic connections. Mounts to D03 (USA) and NG6 (International) mounting patterns. Used in demanding new applications and also to replace existing valves that are made from various manufacturers. Just confirm the voltage, spool type and that the mounting type is the same.
Includes mounting bolts (M5x45mm long) and lighted DIN electrical Connectors.
Rated IP65 for dust and water resistance.
Solenoid Power: DC= 30 watts, AC = 50VA (220VA inrush)
Operating temperature = -22֯F to 174֯F
Valve can be mounted in any direction.
Used in mobile, industrial. automation and construction equipment

Hydraulic Gear Pump Sizes from 0 to 18 gpm 3625psi SAE A Flange Side Ports CCW-Rotation, PFEG series (Shaft: 3/4" diameter keyed, 28cc: 18gpm at max. rpm)

IMPORTANT: SHAFT MUST ROTATE COUNTER CLOCKWISE WHEN LOOKING AT THE SHAFT. IMPROPER ROTATION DIRECTION COULD LEAD TO SHAFT LEAKAGE AND SEAL FAILURE.
SAE A, 2 bolt mounting flange
Up to 3625 psi continuous pressure
Up to 18 gpm
Spline or Keyed shaft options

Hydraulic Flow Divider Combiner Valve (5.7 GPM (22LPM): SAE -6 ORB Ports (3/8"))

The flow divider can both equally divide flow and combine flow.
Flow divides from "V" to "C1" and "C2", and combines flow from "C1" and "C2" to "V". Thereby controlling your actuator speed in both directions.
The dividing and combining flow ration is 50:50 independent of the pressure.
Motors will move at the same rate without one spinning faster than the other when there is no resistance.
Cylinders can move in synchronous.
Block oxide coated steel body.
SAE O-ring boss ports, more resistant to leaks and threads seizing

Hydraulic Pressure Control Valve Cartridge C-10-2 Common Cavity 3000 psi Adjustable, VCR10 series

300-3000 PSI pressure adjustment
Screws into standard C10-2 cavity
10gpm nominal flow
Replaces many 3000-psi rated pressure relieve valves with a C10-2 Cavity
Compare to Parker Hydraforce Eaton Sun

Hydraulic Electrical Solenoid Valve D03 (NG6) 21 GPM 4560 psi Duetsch DT04-2P Connector 3-Position 12VDC (H-All Ports Open to Tank in Center Position)

Robust design proven in many high-volume original equipment manufacturers machines.
Includes mounting bolts (M5x45mm long)
Rated IP67 for dust and improved water resistance.
Used in mobile, industrial. automation and construction equipment
Purchase Fluidhaus sub plate or manifold series SAS6 or MPA6 separately.
Operating temperature = -22֯F to 174֯F
Valve can be mounted in any direction.

Hydraulic Electrical Solenoid Valve with manual override: 21 GPM: 4560 psi: 12VDC 24VDC 110VAC D03 (NG6) Mounting VSD6-M series (H-Open -All Ports Open to Tank in Center, 12VDC)

Robust design proven in many high-volume original equipment manufacturers machines.
Includes mounting bolts (M5x45mm long)
Rated IP65 for dust and water resistance.
Includes lighted DIN connector for each coil. LED illuminate's clear connector housing when power is supplied to the connector/coil.
Used in mobile, industrial. automation and construction equipment
Purchase Fluidhaus sub plate or manifold series SAS6, MPA6 or MSA6 separately.
Solenoid Power: DC= 30 watts, AC = 50VA (220VA inrush)
Operating temperature = -22֯F to 174֯F
Valve can be mounted in any direction.
Upgrade from the following manufactures: Note: These are the basic model codes. Confirm the spool type symbol, voltage and electrical connector style. Eaton Vickers: DGV-3..... Hyvair: D03S-2..... Bosch Rexroth: 4WE6..... Continental: VSD03M..... Argo Hytos: RPE3 Double A Hydraulics Q03 Yuken: DSG.... Northman: SWH-G02

Hydraulic Gear Pump 8cc/rev (.488in3/rev) 2-6gpm 15.8HP 3625psi SAE A Flange CW (3/4" keyed Shaft, Side Ports)

8cc/rev, .488in^3/rev, 6.3gpm at 3000 rpm, 3.8gpm at 1800 rpm
SAE A, 2 bolt mounting flange
3625 psi maximum continuous pressure
Smooth rotational speed 600-3000rpm
15.8HP at 3000 rpm and 3625 psi., 7.8HP at 1800 rpm and 3000 psi

Hydraulic Directional Control Valve D05 (NG10) 31 GPM 4560 psi AC or DC (T-Tandem-Center A&B to Tank and Pressure Blocked, 24VDC)

Robust industrial grade used in many high volume original equipment manufacturers.
Multiple spool and voltage options.
Standard D03 NG10 Cetop 5 mounting pattern
Lighted when energized DIN electrical connectors and mounting bolts included.
IP 65 dust and water resistance rated

Hydraulic Valve Manifold Parallel 1-5 stations D03/NG6/Cetop-3 pattern Aluminum, MPA6 Series, Compare to AD03P__2S (With Pressure Relief valve, 2 stations)

3000 psi rated
Clear anodized aluminum for enhanced surface finish, higher corrosion resistance, smudge resistance and better paint adherence.
SAE O-ring boss ports provide a better leak free system.
P (Pressure) and T (Tank) ports are SAE –10, 7/8-14 threads
A and B working ports are SAE –8, 3/4-16 threads
G (Gauge) port is SAE –6, 9/16-18 thread
Two angled feet are included with eight M8-1.23 x16mm long bolts for ease of mounting. Most competitors don't include.
Option to include a pressure relieve valve with a 300-3000psi adjustment range.. The valve cavity is shipped plugged if the relieve valve is not selected.
Directly replaces many other parallel bar manifolds. Dimensionally compatible with Damon AD03P01 2 S/C series.

Hydraulic Gear Pump CW Rotation 45cc/rev (2.78 in3/rev), 30gpm 3000psi SAE B Flange

IMPORTANT: MUST ROTATE SHAFT CLOCKWISE WHEN LOOKING AT THE SHAFT. IMPROPER ROTATION DIRECTION COULD LEAD TO SHAFT LEAKAGE AND SEAL FAILURE.
SAE B, 2 bolt mounting flange
Up to 3000 psi continuous pressure
Up to 30 gpm at 2500 rpm
7/8" keyed shaft

Hydraulic Cartridge Plug C10-2 Common Cavity

Screws into standard C10-2 cavity
3000 PSI pressure rating
18gpm nominal flow
Upgrade from Parker, Hydraforce, Eaton Vickers, Bosch Rexroth

Fluidhaus FAQs

Yes, Fluidhaus is a legitmate brand on Amazon. After conducting a comprehensive analysis of 16 customer reviews for Fluidhaus products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Fluidhaus has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Fluidhaus on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Fluidhaus and want to find more Fluidhaus products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Fluidhaus in the search box and hit Enter to see the search results.
  3. Find and click the correct Fluidhaus to go to the new page.
  4. Select the products you want in the Fluidhaus buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Fluidhaus products.

We analyze millions of Fluidhaus products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 53 Fluidhaus products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Fluidhaus page.
  2. Select the product you want in the Fluidhaus buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Hydraulic Valve Electric Solenoid, D03 (NG6) DIN C..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the Fluidhaus products, helping you make more informed buying decisions. We recommend best choices of the products from the Fluidhaus brand, helping you make better shopping choices with less time and energy.