Skip to content
Barnes 4WD feature image

Barnes 4WD

4.7 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Barnes 4WD has 209 products for sale. Barnes 4WD products range in price from $9.63 to $401.65, and the average price of all the products is about $61.34.

You can confidently purchase Barnes 4WD products from the seller Barnes 4WD. The brand holds an average rating of 4.7, testifying to its excellent reputation.

Share

Barnes 4WD Best Sellers

Last Updated: Jan 8, 2026

Barnes 4WD Winch Fairlead Mount

  • The Barnes 4WD Winch Fairlead Mount installs between the winch and the bumper so you can mount your Hawse or roller fairleads.
  • The Barnes 4WD Winch Fairlead Mount installs between the winch and the bumper so you can mount your Hawse or roller fairleads.
  • Want to add a LED Light Bar or some Cube Lights for night wheeling? Then Check out our new FAIRLEAD LED MOUNT.

JK FRONT LOWER CONTROL ARM BRACKETS

  • If you are looking to replace your damaged thin factory Jeep JK front lower control arm brackets or if you are looking for a little more peace of mind on the trail we have you covered.
  • Our JK front lower control arm brackets are made from 1/4" steel, and have built in skids enabling them to stand up to what ever you might encounter on the trail.
  • These are direct replacements for the factory brackets, they are easily located on the axle tube (see pictures) and will need to be welded in place.

Barnes 4WD WARN 8274 Dual Pull Winch Plate

  • The Barnes 4WD Warn 8274 Dual Pull Winch Plate was an idea born out of necessity. More and more rigs are tackling harder obstacles than ever.
  • With today's super flexible suspension systems it is often helpful to "suck down" the front of your rig so that the suspension will not unload on a steep incline. This is where the Dual Pull Winch plate shines.
  • Our winch plate has two openings one on the front for vehicle extraction and one on the bottom to so you can run your winch rope straight down to your axle.

Barnes 4WD Dual Pull Winch Plate (26 inches)

  • DUAL PULL WINCH PLATE (26 inches)
  • More and more rigs are tackling harder obstacles than ever. With today's super flexible suspension systems it is often helpful to "suck down" the front of your rig so that the suspension will not unload on a steep incline.
  • This is where the Dual Pull Winch plate shines. Our winch plate has two openings one on the front for vehicle extraction and one on the bottom to so you can run your winch rope straight down to your axle. Your rope will need to just have a thimble end on it like the Master Pull rope in the picture so that you can easily thread the rope through either Fairlead.

Barnes 4WD B4W25004BP - Anti-Wrap Leaf Spring Perch Pair, GM 14 Bolt & Dana 70

  • Laser Cut from 1/4" US Steel
  • 7 3/4" length to prevent axle wrap
  • Multiple Leaf Srping Holes to adjust wheel base

UNIVERSAL FLAT STEERING STABILIZER BRACKET

  • This is our flat universal steering stabilizer bracket, it is designed to fit 1.5" O.D. tubing.
  • It is manufactured from 3/16" steel, has a 3/8" mounting hole, and will ship raw and need to be painted or powder coated upon installation.
  • Kit Contents: 1 Universal Flat Steering Stabilizer Bracket 2 U-bolts with nuts and lock washers

Barnes 4WD B4W25028BP - Anti-Wrap Leaf Spring Perch Pair, Dana 44

  • Laser Cut from 1/4" US Steel
  • 7 3/4" length to prevent axle wrap
  • Multiple Leaf Srping Holes to adjust wheel base

Barnes 4WD B4W25006BP - Anti-Wrap Leaf Spring Perch Pair, Dana 30 & Dana 35

  • Laser Cut from 1/4" US Steel
  • 7 3/4" length to prevent axle wrap
  • Multiple Leaf Srping Holes to adjust wheel base

Barnes 4WD B4W25027BP - Anti-Wrap Leaf Spring Perch Pair, Dana 44HD, 3inch axle tube 2.5 wide springs

  • Laser Cut from 1/4" US Steel
  • 7 3/4" length to prevent axle wrap
  • Multiple Leaf Srping Holes to adjust wheel base

U Bolt Plates (3" Springs) Pair for Ford

  • These Ford U-Bolt plates are made for 3" wide Leaf Springs, if the center locating pin hole is used it will fit a 2 3/4"-3 5/8" axle tube.
  • These U-bolt plates are also a perfect match for our custom spring perches. Like our spring perches these U-Bolt plates offer 2" of total wheelbase adjustment so that your u-bolts will stay perpendicular to the axle tube.
  • They are laser cut form 3/8" plate and are CNC bent to make them incredibly rigid. Our U-bolt plates also offer slotted u-bolt holes so that if you upgrade to larger axles you will not have to purchase new u-bolt plates to help keep upgrade cost down.

Adjustable Inner Frame Link Mount Bracket (20°, 9/16 Bolt Hole)

  • These adjustable inner frame link mount brackets are made to be welded directly to your frame.
  • This is a super strong CNC bent, Laser cut bracket made to take serious abuse.
  • Perfect for a three link or four link suspension system. These are made to be attached to your frame and have an inside width of 2 5/8" or 2".

BENT & CURVED, AXLE or TUBE SHOCK BRACKET PAIR

  • This shock mount is the "best of the best", it is bent for strength and curved for clearance.
  • This bracket is laser cut and CNC bent for effortless fitment to your axle tube
  • Like all of our brackets we give you more options to fit your specific application, our shock brackets are cut so that you can weld it to your axle with the shock bolt perpendicular or parallel to your axle tube.

HEAVY DUTY LEAF SPRING HANGER PAIR (3" Inside Width (2.5" Springs))

  • Our spring hangers are simple and strong. They are laser cut from 1/4" plate steel and the bent on a CNC press brake.
  • They are ramped so that you will slide smoothly over any obstacle and have a 9/16" bolt hole.
  • These spring hangers are also designed so that the spring eye bolt is flush with the end of the base of the bracket. These allows you to gain a inch of wheel base over a traditional design.

PRO SERIES FRONT AXLE TRUSS FOR JEEP JK DANA 30

  • Made to span the full length of your housing to prevent bent or broken axle tubes
  • Link to Installation Instructions Below
  • These trusses are made to span the full length of your housing to prevent bent or broken axle tubes

JK INNER C GUSSETS

  • With the way that people are wheeling their JK's now bent axles are all too common. One common point for the JK front axle to bend is at the inner C's. The Barnes 4WD JK Inner C Gussets will prevent this from happening
  • These gussets will work on your JK no matter if it have a Dana 30 or if you have a Rubicon with a Dana 44.
  • The gussets are cut from 100,000 tensile strength steel and are cut to be a precise fit to your axle and inner c.

Barnes 4WD FAQs