Solid Dana 35 Heavy Duty Differential Cover
- Lifetime warranty
- Thick nodular iron casting with reinforcing rib
- Replaces weak factory stamped steel covers
* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.
When purchasing a product, price is the consumer's primary concern. At present, Oliver's Custom Drive Shaft has 28 products for sale. Oliver's Custom Drive Shaft products range in price from $124.99 to $690, and the average price of all the products is about $364.49. You should take everyting into consideration before buying the products, after all, it is not a small expenditure for most consumers.
We found that most of the Oliver's Custom Drive Shaft products are manufactured by Solid, Oliver's Driveline and Gear, and SOLID AXLE. The manufacturers provide Oliver's Custom Drive Shaft with a steady supply of products, and they have a good cooperative relationship with each other.
You can confidently purchase Oliver's Custom Drive Shaft products from the seller Olivers Driveline and Gear. The brand holds an average rating of 4.84, testifying to its excellent reputation.
Share
Oliver's Custom Drive Shaft Best Sellers
Last Updated: Jan 8, 2026
JK Wrangler 1310 CV Front Driveshaft *Greaseable Spicer U-Joints*
- Front Driveshaft fits Jeep JK Wrangler 2007-18 (2 door or 4 door), with 3-6" of lift.
- Long Travel CV drive shaft, T-Case And Diff yokes, and all needed hardware
- Works on Rubicon and Non Rubicon Models - Auto and Man. Trans. 2007-2018 JK Only
Wrangler CV 1310 Rear Drive Shaft - TJ & Advanced Adaptors SYE (NON RUBICON)
- Fits Jeep Wrangler TJ Rear 1310 Drive Shaft with Free Advance Adaptors SYE 231J
- FITMENT: Jeep: 97-06 Wrangler TJ 4WD 1310 REAR DRIVE SHAFT (WILL NOT FIT RUBICON)
- DRIVE SHAFT SPECS: Collapsed Length: 15-inches; Fully Extended Length: 18-inches; Running Length: 16 - 16.5-inches; A Lifted Jeep TJ Wrangler requires a CV (Double Cardan) drive shaft to eliminate vibration issues.
Solid Dana 30 Heavy Duty Differential Cover
- Lifetime warranty
- Thick nodular iron casting with reinforcing rib
- Replaces weak factory stamped steel covers
Fits Jeep Cherokee XJ 1310 CV Rear Driveshaft Automatic Transmission *Greaseable U-joints*
- FITMENT: 1988-2001 Cherokee XJ 4WD with Auto Trans. 1310 REAR DRIVE SHAFT
- DRIVE SHAFT SPECS: Collapsed Length: 31.5 inches; Fully Extended Length: 35 inches; Running Length: 32.75" - 33.25" inches; A Lifted XJ Cherokee requires a CV (Double Cardan) drive shaft to eliminate vibration issues.
- A Slip Yoke Eliminator Kit is required!
Solid 8.25 HD Differential Cover
- Adds rigidity to weak factory housings
- Lifetime warranty
- Thick nodular iron casting with reinforcing ribs.
Fits Jeep JK JKU Wrangler Unlimited 4 Door Rear Drive Shaft For 2007-2018 *Solid Spicer U-joints*
- Long Travel CV drive shaft, T-Case And Diff yokes, and all needed hardware.
- Lifting your JK Wrangler more than 2.5" Requires a CV (Dual Cardan) This will help to eliminate vibration issues.
- Heavy Duty Non-greasable U-joints
Fits Jeep Wrangler YJ 1310 CV Rear Drive Shaft Manual Transmission *Greaseable U-joints*
- FITMENT: 88-96 Wrangler YJ 4WD 1310 REAR DRIVE SHAFT
- DRIVE SHAFT SPECS: Collapsed Length: 16.5 inches; Fully Extended Length: 18.5 inches; Running Length: 17.25- 17.75-inches; A Lifted YJ Wrangler requires a CV (Double Cardan) drive shaft to eliminate vibration issues. Made with Spicer 1310 U-Joints
- A Slip Yoke Eliminator Kit is required! Some YJ's require a 1330 U Joint at the rear diff, if you need this, you MUST let us know when ordering.
Fits Jeep Wrangler JK 2 Door 1310 CV Rear Drive Shaft 2012-18 Models*Greaseable U-joints*
- 2012-18 JK Rear Drive Shaft For Wrangler JK 2 Door 4x4.
- 1310 CV Shaft, Comes with New T-case & Diff yoke and all needed Hardware.
- Works on Rubicon and Non Rubicon Models - Auto and Man. Trans.
Solid Dana 60 & 70 Heavy Duty Differential Cover
- Lifetime warranty
- Adds rigidity to weak factory housings
- Dense material quiets down noisy lockers.
Fits Jeep Wrangler JK 2 Door 1310 CV Rear Drive Shaft 2007-11 Models
- Long Travel CV drive shaft, T-Case And Diff yokes, and all need hardware
- Lifting your JK Wrangler more than 2.5" Requires a CV (Dual Cardan) This will help to eliminate vibration issues!
- Spicer Serviceable 1310 U-joints.
Solid 8.8 Heavy Duty Differential Cover
- Adds rigidity to weak factory housings
- Lifetime warranty
- Thick nodular iron casting with reinforcing ribs.
Solid GM Corporate 14 Bolt (10.5" Only) Heavy Duty Differential Cover
- Thick nodular iron casting with reinforcing ribs
- Adds rigidity to weak factory housings
- Dense material quiets down noisy lockers
JK Wrangler JKU Unlimited 4 Door Rear Drive Shaft For Jeep ™ Wrangler 2007-2018 JK Wrangler JKU Unlimited 4 Door
- Long Travel CV drive shaft, T-Case And Diff yokes, and all needed hardware.
- Lifting your JK Wrangler more than 2.5" Requires a CV (Dual Cardan) This will help to eliminate vibration issues.
- Spicer Serviceable 1310 U-joints.
Solid Dana 44 Heavy Duty Differential Cover
- Adds rigidity to weak factory housings
- Lifetime warranty
- Thick nodular iron casting with reinforcing ribs.
Solid "Super Duty" Sterling 10.25 & 10.5 Heavy Duty Differential Cover
- Lifetime warranty
- Adds rigidity to weak factory housings
- Dense material quiets down noisy lockers.
Fits Jeep Cherokee XJ 1310 CV Rear Driveshaft Rear Driveshaft Manual Transmission
- FITMENT: 88-01 Cherokee XJ 4WD With Man. Trans. 1310 REAR DRIVE SHAFT
- DRIVE SHAFT SPECS: Collapsed Length: 33.75 inches; Fully Extended Length: 36.75 inches; Running Length: 34.50" - 35.00" inches; A Lifted XJ Cherokee requires a CV (Double Cardan) drive shaft to eliminate vibration issues.
- A Slip Yoke Eliminator Kit is required!
TJ Wrangler (Non-Rubi) 1310 CV Rear Driveshaft *Greaseable Ujoints*
- FITMENT: 1997-06 Wrangler TJ 4WD 1310 REAR DRIVE SHAFT
- DRIVE SHAFT SPECS: Collapsed Length: 15-inches; Fully Extended Length: 18-inches; Running Length: 16 - 16.5-inches; A Lifted TJ Wrangler requires a CV (Double Cardan) drive shaft to eliminate vibration issues.
- Does not fit "Rubicon" models; Does not fit "Unlimited" LJ models; A Slip Yoke Eliminator Kit is required!
Fits Jeep Wrangler YJ 1310 CV Rear Drive Shaft Automatic Transmission *Solid Spicer U-joints
- FITMENT: 88-96 Wrangler YJ 4WD with Auto Trans. 1310 REAR DRIVE SHAFT
- DRIVE SHAFT SPECS: Collapsed Length: 18.25 inches; Fully Extended Length: 21.25 inches; Running Length: 19- 19.5-inches; A Lifted YJ Wrangler requires a CV (Double Cardan) drive shaft to eliminate vibration issues. Made with Spicer 1310 U-Joints.
- A Slip Yoke Eliminator Kit is required! Some YJ's require a 1330 U Joint at the rear diff, if you need this, you MUST let us know when ordering.
Fits Jeep Cherokee XJ 1310 CV Rear Driveshaft Automatic Transmission *Solid Spicer U-joints*
- FITMENT: 1988-2001 Cherokee XJ 4WD with Auto Trans. 1310 REAR DRIVE SHAFT
- DRIVE SHAFT SPECS: Collapsed Length: 31.5 inches; Fully Extended Length: 35 inches; Running Length: 32.75" - 33.25" inches; A Lifted XJ Cherokee requires a CV (Double Cardan) drive shaft to eliminate vibration issues.
- A Slip Yoke Eliminator Kit is required!
