American Pressure Inc. Beckett CleanCut 12VDC B20 Pump PF20372U
- Maximum Flow Rate: 4 GPH
- Maximum Pressure: 100 PSI
- Maximum Speed: 3450 RPM
* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.
When purchasing a product, price is the consumer's primary concern. At present, American Pressure Inc. has 56 products for sale. American Pressure Inc. products range in price from $22.99 to $2020, and the average price of all the products is about $342.8. You should take everyting into consideration before buying the products, after all, it is not a small expenditure for most consumers.
We found that most of the American Pressure Inc. products are manufactured by R W Beckett, Wayne Combustion Systems, and Hydra-Flex, Inc.. The manufacturers provide American Pressure Inc. with a steady supply of products, and they have a good cooperative relationship with each other.
You can confidently purchase American Pressure Inc. products from the seller American Pressure Inc.. The brand holds an average rating of 4.83, testifying to its excellent reputation.
Share
American Pressure Inc. Best Sellers
Last Updated: Jan 11, 2025
American Pressure Inc. Wayne Combustion Solid State Ignition Source (101295-SERM)
- Ignitor Kit MSR Series burners Replaced kit 101121-001, 23101-E
- Solid State Igntion Source
- 120 Volts - 50/60 HZ - 40 VA
HD Ripsaw Rotating Hydro Excavation Turbo Nozzle (8.0) - Old Part Number 1002719-080 / New Part Number 20022384
- New heavy duty coating - a special formulation designed for use in extreme environments including frost, shale, and other rocky conditions
- Heavy-duty design engineered for the rugged demands of the hydro excavation industry
- Blasts a 0 degree straight water stream while rotating at a high speed to form an 18 degree cone
American Pressure Easy Pull Pressure Washer Trigger Gun -13 gpm 4850 psi - 3/8 in Inlet x 1/4 in Outlet (Made by Suttner)
- Rated to maximum pressure 4850 PSI
- Max temperature rating of 300 degree F
- Can handle up to 13 GPM (gallons per minute)
CAT 4DNX Direct Drive Plunger Pump 4DNX25GSI
- Maximum Pressure Rating: 3000 PSI
- Maximum Flow Rating: 2.5 GPM
- Maximum RPM: 3450 RPM - Drive Type: Direct
American Pressure Stainless Steel High Pressure Live Gun Swivel - 3/8″ (Replacement for 32.564 DGV) - Made by Mosmatic
- Eliminates hose twist
- Reduces stress on operator and equipment
- Rated to Max of 4000 PSI at 30 GPM
American Pressure Inc. Mosmatic 81.426 Dual Arm Fixed 6 in. Duct Cleaner - 3/8" FNPT - Clean Vent Hoods, Trash Chutes, Pipes, Totes, and Manholes
- Use with warm water temps, up to 250° F!
- Maximum pressure: 4000 PSI / Maximum speed: 2000 RPM
- Inlet: 3/8" NPTF (female national pipe thread)
Pressure Washer Downstream Chemical Injector Bypass Kit - Improved Design (1.8 High Draw)
- 1.8 Orifice is for flow rates between 2.0 - 3.0 GPM
- 3/8" Stainless Steel Quick Connects
- (2) U.S Made 3/8" Street Tees - 3/8" Stainless Steel Quick Connects
American Pressure Inc. Veloci Utility Bracket - 44.0021 - Foam Cannon Holder for Bucket - for Use with Veloci PF22 Narrow Mouth Foam Cannon
- Temporary Storage for Veloci PF22 Narrow Mouth Foam Cannon, Easy to Reach
- Can Also Be Used to Hold Trigger Gun, Lance, or Your Ball Cap!
- 12 Gauge High- Quality Italian Stainless Steel
General Pump 1/2" 5000 PSI 40 GPM Inline High-Pressure Filter 101146
- Keeps debris out of nozzle and extends nozzle life
- 100 mesh, stainless steel mesh screen is standard
- Easy to disassemble and assemble for cleaning.
American Pressure Inc. General Pump 520297M Clutch Alignment Centering Tool
- Used for General Pump Clutch Assemblies 100687, 100688, 100717, 100718, 100719, 100720
- 1/2" x 13 Threaded Hose to Accomodate Slide-Hammer or Bolt
General Pump EP1810S17 (2500 PSI/ 3.4 GPM) - EP Series -24 MM Solid Shaft - 1750 RPM - Brass Manifold - Pressure Washer Pump
- Maximum Flow Rate: 3.4 GPM
- Maximum Discharge Pressure: 2500 PSI
- Maximum Fluid Temperature: 165º F
General Pump EZ3042S (3000 PSI/ 4.2 GPM) - EZ Series 44-24 MM Solid Shaft - 1750 RPM - Brass Manifold - Pressure Washer Pump
- Max Flow Rate: 4.2 GPM
- Max Discharge Pressure: 3000 PSI
- Maximum Fluid Temperature 165 Degrees F
Cat Pump 5CP3120 Triplex Plunger Industrial Duty Pump - 3500 PSI / 4.5 GPM
- Max Flow: 4.5 GPM / 17 lpm
- Max Pressure: 3500 PSI
- Inlet Port Size: 1/2" NPT(F)
American Pressure - 304 Grade Stainless Steel Cone Steam Nozzle - Ideal for Melting Snow
- 304 Grade Stainless steel multistage steam expansion nozzle
- Designed for steam applications
- Concentrates steam to melt ice quickly
Suttner Pressure Washer Inline Trigger Gun, ST-601, 4000 PSI/12 GPM 200601610
- Maximum Ratings: 4000 PSI, 12 GPM, 300 Degrees F
- Inlet: 3/8" FNPT - Outlet: 1/4" FNPT (female national pipe thread)
- Forged brass housing for maximum strength. Horizontal flow-through design.
Hydra-Flex - Aqua-Rocket Pro™ Industrial Turbo Nozzle – 5600 PSI
- Inlet Connection Thread: 1/4" FNPT
- Minimum Inlet Pressure: 1500 PSI (100 bar)/ Maximum Water Temperature: 212F (+100C)
- Housing Material: Stainless Steel/ Cover Material: Rubber
Reaper, Rotating Jetting Nozzle, 30 Degree Nozzle, 1/2" FNPT Inlet - Good for 4-8” Pipes (18.0)
- Heavy-duty design engineered for jetting applications
- High-impact, high-impingement allows you to use one tool for every job (cutting, cleaning, removal, etc.)
- Front jet blasts a 0-degree straight water stream while rotating at a high speed to form a 30-degree cone
Hose Reel Connector Jumper Hose for Pressure Washing, 3/8-Inch Male Pipe Thread, 6000 PSI Rated (2 Foot)
- 6,000 PSI Working Max, Max Temperature 250 Degrees F
- 3:1 Working Pressure Burst (Min), 200,000+ Impulse Life
- SOLxSWV (Solid x Swivel) Fittings
Hydra-Flex, Inc. Reaper, 30 Degree Cone, Rotating Jetting Nozzle, 1" FNPT Inlet (40.0) - Good for 6"-18" Pipes
- Heavy-duty design engineered for jetting applications
- High-impact, high-impingement allows you to use one tool for every job (cutting, cleaning, removal, etc.)
- Front jet blasts a 0-degree straight water stream while rotating at a high speed to form a 30-degree cone
