Azocek Top 20 Products from Power Tool Battery Converters Brand

Azocek 220W Power Inverter Compatible with Dewalt 20V Battery, DC 20V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light

Power Tool Battery Converters

Compatible with DeWalt 20V Batteries: This Azocek inverter is specially designed Compatible with DeWalt 18V/20V batteries (e.g., DCB206, DCB205, DCB204). Powered directly by the battery, provides portable power for outdoor activities or emergencies anytime, anywhere (Battery not included)

220W DC to AC Power Conversion: Converts 20V DC to 110V-120V AC, providing a reliable power source for phones, laptops, tablets, and other small electronics, making it essential for travel and power outages.

Fast Charging USB and Type-C Ports: This inverter features one AC outlet, two 18W USB QC ports, and one 30W PD Type-C port, enabling the simultaneous rapid charging of multiple devices.

Multi-Function 400LM LED Light: Equipped with a 3-level adjustable brightness LED work light, strobe function, and a 90-degree adjustable lighting angle, making it ideal for outdoor use and emergency situations.

Enhanced Safety Features: This inverter provides comprehensive protection against short circuits, overcurrent, low voltage, overheating, overload, and over-discharge. The built-in cooling fan effectively dissipates heat, ensuring reliable operation in various environments.

Read more Read less

220W Azocek Power Inverter Compatible with Milwaukee 18V Battery, DC 18V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light

Power Tool Battery Converters

Buy on Amazon Find on eBay

Compatible with 18V Batteries: This Azocek power inverter is specifically designed Compatible with Mil-wau-kee 18V batteries (e.g., 48-11-1815, 48-11-1850, 48-11-1820), powered directly by the battery, provides portable power for outdoor activities or emergencies anytime, anywhere (Battery not included)

220W DC to AC Power Conversion: Converts 18V DC to 110V-120V AC, providing a reliable power source for phones, laptops, tablets, and other small electronics, making it essential for travel and power outages.

Fast Charging USB and Type-C Ports: This Azocek power inverter features one AC outlet, two 18W USB QC ports, and one 30W PD Type-C port, enabling the simultaneous rapid charging of multiple devices.

Multi-Function 400LM LED Light: Equipped with a 3-level adjustable brightness LED work light, strobe function, and a 90-degree adjustable lighting angle, making it ideal for outdoor use and emergency situations.

Enhanced Safety Features: This inverter provides comprehensive protection against short circuits, overcurrent, low voltage, overheating, overload, and over-discharge. The built-in cooling fan effectively dissipates heat, ensuring reliable operation in various environments.

Read more Read less

Azocek LED Work Light Compatible with Dewalt 20V Battery, 40W 6000LM Flashlight, 20V Battery Cordless Work Light 120°Adjustable with Low Voltage Protection for Outdoors and Job Site Lighting

Job Site & Security Lighting

Buy on Amazon Find on eBay

Portable LED Work Light: This work light is 40W and a brightness of 6000 lumens with a color temperature of 6500K, with the latest LED lighting chips and aluminum panels, fast heat dissipation, and high brightness, becoming the outdoor lighting tool of choice

Battery Compatible: Perfectly compatible with Dewalt 18V/20V lithium batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery-powered light is well-design, snugly fit your battery, easy to install and remove. Warm Tip: This LED work light does not include batteries

Low Voltage Protection: The LED work light is equipped with overload, over current, overheat, low voltage protection. It guarantees that the battery will cease operating when the battery voltage drops below 15V, and avoid over-discharge of the battery and damage to the battery

Widely Applicable: This cordless LED work light is designed for easy portable and is perfect for working in a dark environment, such as job sites, outdoor events, camping, hiking, vehicle maintenance, and many other situations, providing you with an efficient and reliable lighting solution

Important Note: This 20V work light does not include any batteries. If you don't use it for a long time, please be sure to remove the LED light from your battery, or it will drain the battery. If you have any questions, please feel free to consult us

Read more Read less

2 Packs Azocek LED Work Light Compatible with Mil-wau-kee 18V Battery, 40W 6000LM Flashlight,18V Battery Cordless Work Light 120°Adjustable with Low Voltage Protection for Outdoors Job Site Lighting

Job Site & Security Lighting

Buy on Amazon Find on eBay

Azocek Portable LED Work Light: This work light is 40W and a brightness of 6000 lumens with a color temperature of 6500K, with the latest LED lighting chips and aluminum panels, fast heat dissipation, and high brightness, becoming the the outdoor lighting tool of choice

Battery Compatible: Azocek work light perfectly compatible with 18V battery, works with 48-11-1815, 48-11-1850, 48-11-1820, 48-11-1840, 48-11-1815 etc. Our battery-powered light is well-design, snugly fit your battery, easy to install and remove. Warm Tip: Azocek LED work light does not include batteries

Low Voltage Protection: The Azocek LED work light is equipped with overload, over current, overheat, low voltage protection. It guarantees that the battery will cease operating when the battery voltage drops below 15V, and avoid over-discharge of the battery and damage to the battery

Widely Applicable: This Azocek cordless LED work light is designed for easy portable and is perfect for working in a dark environment, such as job sites, outdoor events, camping, hiking, vehicle maintenance, and many other situations, providing you with an efficient and reliable lighting solution

Important Note: This 18V work light does not include any batteries. If you don't use it for a long time, please be sure to remove the LED light from your battery, or it will drain the battery. If you have any questions, please feel free to consult us

Read more Read less

220W Azocek Power Inverter Compatible with Milwau-kee 18V Battery, DC 18V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light (2-Pack)

Power Tool Battery Converters

Buy on Amazon Find on eBay

Compatible with 18V Batteries: This Azocek power inverter is specifically designed compatible with Mil-wau-kee 18V batteries (e.g., 48-11-1815, 48-11-1850, 48-11-1820), providing portable power for outdoor activities or emergencies anytime, anywhere. (Battery not included)

220W DC to AC Power Conversion: Converts 18V DC to 110V-120V AC, providing a reliable power source for phones, laptops, tablets, and other small electronics, making it essential for travel and power outages.

Fast Charging USB and Type-C Ports: This Azocek power inverter features one AC outlet, two 18W USB QC ports, and one 30W PD Type-C port, enabling the simultaneous rapid charging of multiple devices.

Multi-Function 400LM LED Light: Equipped with a 3-level adjustable brightness LED work light, strobe function, and a 90-degree adjustable lighting angle, making it ideal for outdoor use and emergency situations.

Enhanced Safety Features: This inverter provides comprehensive protection against short circuits, overcurrent, low voltage, overheating, overload, and over-discharge. The built-in cooling fan effectively dissipates heat, ensuring reliable operation in various environments.

Read more Read less

Azocek 18V to 12V Step Down Converter Compatible with Milwaukee 18V Battery Azocek Power Wheel Battery Adapter DC 12V 20A 240W Buck Converter Regulator with 30A Fuse & Wire Terminal

Power Tool Battery Converters

Buy on Amazon Find on eBay

Azocek Step-down Converter: Input Voltage: DC 18V-20V; Output Voltage: DC 12V; Output Current: 20A Max; Output Power 240W Max

Compatibility: Azocek adapter perfectly compatible with Mil-wau-kee 18V lithium batteries, works with 48-11-1815, 48-11-1850, 48-11-1820, 48-11-1840, 48-11-1815 etc. Our battery adapter connector is well-design, snugly fit your battery, easy to install and remove(Note: Battery NOT Included)

Better Safety: Voltage regulator built-in smart chip, features Over-current, Over-voltage, Over-load, Short-circuit, Over-heat multiple intelligent protection, protect your devices from overpower damage. Equipped with an external fuse holder and 30A fuse to enhance operational safety when used properly

Easy to Use: We combine the battery adapter and the voltage converter with 2 heat-resistant wires ＆ fuse holder, make it more easy to use, just install the battery to the battery adapter and then connect the voltage converter to your device. (Note: Ensure the connected device is rated for 12V DC and does not exceed 20A)

Widely Applicable: This Azocek step down converter suitable for various 12V devices, ideal for upgrade power tools, speaker, monitoring equipment, led strip light, work lights or robotics DIY etc. If you have any questions, please feel free to consult us

Read more Read less

Azocek 350W Power Inverter Pure Sine Wave Compatible with Milwaukee 18V Battery (No Battery), 7A Fast Charger, Portable Power Station with 2 AC Outlets, 2 Type-C (140W/65W), 2 USB Ports, 600LM LED

Power Tool Battery Converters

Buy on Amazon Find on eBay

Compatible with Milwaukee 18V Batteries: This Azocek power inverter is specially designed for Compatible with Milwaukee 18V batteries (e.g., 48-11-1850, 48-11-1865, 48-11-1880). Powered directly by the battery, provides portable power for outdoor activities or emergencies anytime, anywhere (Battery not included)

350W Pure Sine Wave Power Inverter: Safely converts 18V DC to 110V-120V AC with clean, stable power. Unlike modified sine wave, pure sine wave protects sensitive electronics, ensuring quieter, smoother performance for phones, laptops, tablets, and other small devices—ideal for travel and power outages

Multiple Fast Charging Ports: Includes 2 AC outlets, 2 USB QC 18W ports, and 2 PD Type-C ports (140W/65W). The 140W Type-C enables ultra-fast charging for laptops and tablets, while 65W powers phones and other devices. Supports simultaneous charging, ideal for travel and emergencies

7A Fast Battery Charging: The Type-C Dual Role Port (DRP) works as both a power output for devices and a battery charging adapter, supporting up to 7A input current for rapid battery charging. Convenient for managing and recharging batteries anytime, anywhere (Includes 140W Type-C charging cable)

600LM LED Work Light – Features a 600-lumen LED with 3 adjustable brightness levels (35/70/100%), plus strobe and SOS modes for emergency signaling. Perfect for outdoor work, camping, night activities, hiking, and emergencies, providing bright, reliable illumination wherever you go

Enhanced Safety Features – This Azocek 350W pure sine wave battery inverter provides full protection against short circuits, overloads, over-discharge, overheating, and fault errors. Its built-in cooling fan ensures stable operation in any environment, keeping batteries and devices safe and reliable

Read more Read less

New Upgrade Azocek LED Work Light Compatible with Mil-wau-kee 18V Battery, 48W 4800LM Flashlight, 18V Battery Cordless Work Light with Low Voltage Protection & Dual USB & Type-C Charging Port (48W)

Job Site & Security Lighting

Buy on Amazon Find on eBay

Safer New Version Adapters: Our new upgraded adapters feature over-discharge, no-load disconnect, over-current and low voltage protection. When the output current is more than Resistive Loads 20A or the output voltage is less than 15V, the product will cut off the output and turn off automatically when the adapter is empty. Safer circuit setup and ABS + V0 fireproof base material protect your battery from damage!

Azocek Portable 18V LED Work Light: This work light is 48W and a brightness of 4800 lumens with a color temperature of 6500K, 120-140°beam angle design, with the latest LED lighting chips and aluminum panels, fast heat dissipation, and high brightness, becoming the outdoor lighting tool of choice

Battery Compatible: Azocek adapter perfectly compatible with red 18V lithium batteries, works with 48-11-1815, 48-11-1850, 48-11-1820, 48-11-1840, 48-11-1815 etc. Our battery-powered light is well-design, snugly fit your battery, easy to install and remove

3 Fast Charging Ports: Azocek Cordless flashlight 18V work light can charge 3 devices at once. 2 USB-A Ports & 1 Type-C charging port supports fast charging for cell phones, tablets, and other electronic devices. When charging with a single port, USB-A output: QC 18W Max, Type-C output： PD 30W Max

Wide Application: This cordless LED work light is easy to carry, perfect for working in dark environments, such as outdoor emergency lighting, camping, hiking, vehicle maintenance, and many other occasions, providing you with an efficient and reliable lighting solution

Read more Read less

Azocek 20V to 12V Step Down Converter 20A 240W Max - Compatible with DeWalt 20V Battery, Power Wheel Battery Adapter, DC 12V Buck Regulator with 30A Fuse & Wire Terminal

Power Tool Battery Converters

Buy on Amazon Find on eBay

Step-down Converter: Input Voltage: DC 18V-20V; Output Voltage: DC 12V; Output Current: 20A Max; Output Power 240W Max. Please ensure correct polarity connection. Do not use devices exceeding the rated power

Compatibility: Perfectly compatible with Dewalt 18V/20V lithium batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter connector is well-design, snugly fit your battery, easy to install and remove

Better Safety: Voltage regulator built-in smart chip, features Over-current, Over-voltage, Over-load, Short-circuit multiple intelligent protection, protect your devices from overpower damage. Battery adapter also have added fuse holder and 30A fuse ensures you can use it safely

Easy to Use: We combine the battery adapter and the voltage converter with 2 heat-resistant wires ＆ fuse holder, make it more easy to use, just install the battery to the battery adapter and then connect the voltage converter to your device. (Note: Battery NOT Included)

Widely Applicable: This step down converter suitable for various 12V devices, ideal for upgrade power tools, ride on toys, golf carts, car trucks, speaker, monitoring equipment, led strip light, work lights or robotics DIY etc. If you have any questions, please feel free to consult us

Read more Read less

Azocek 2 Packs DM18D Battery Adapter Converter with USB Port for Dewalt 18V Tools, Converts for De-Walt 20V for Mil-Waukee 18V Li-ion to De-Walt 18-V Battery Adapter

Buy on Amazon Find on eBay

Compatible with Dewalt 20V Lithium-ion Battery: Azocek DM18D adapter works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Can quickly convert for Dewalt 20v to 18v battery, perfect replacement for De-Walt 18V DC9096 DE9039 DE9095 DE9096 DE9098 DW9095 DW9096 DW9098 DE9503 batteries

Compatible with Mil-wau-kee 18V Lithium-ion Battery: Azocek DM18D adapter works with 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828 etc. Can quickly convert red 18V battery to De-walt 18V battery

Use for De-walt 18V tools: Compatible with for De-walt 18V NiCad & NiMh tools model DC020, DC212B, DC212KZ, DC212N, DC330K, DW932, C410N, DC530KA, DC720KA, DC823K, DW932 etc

Upgraded Version of DCA-1820: Not only for De-Walt but also compatible with Mil-wau-kee's Lithium-ion Batteries. With 5V/2.1A USB output port to charge your electronic device anytime

Important Note: 1. This Azocek battery adapter can not be used for power tool battery charging. 2. If you don't use it for a long time, please be sure to remove the battery from the adapter

Read more Read less

for Power Wheel Adapter Compatible with Dewalt 20V Battery Converter Kit with Switch & Fuse & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Power Tool Battery Converters

Buy on Amazon Find on eBay

Better Safety: This Azocek battery adapter features upgraded wiring protection and a built-in switch to ensure you can easily turn the battery on and off. In addition, the waterproof fuse holder, 30A fuse, heat-resistant ABS material, and premium 12AWG wire are configured for high-power applications for increased safety and conductivity

More convenient: The battery adapter comes with wire terminals, 30A fuses, screws, and drywall anchors. Rich accessories to make your DIY work easier, and ideal for indoor and outdoor use! (Note: battery not included)

Compatibility: Perfectly compatible with Dewalt 18V/20V lithium batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter connector is well-designed, snugly fits to your battery, easy to install and remove

Widely applicable: Use this battery adapter to power other devices. The max allowable current is 20A for 12AWG wire. You can safely upgrade your toy cars, Rc trucks, robots, work lights, etc. Enjoy your DIY

Important Note: 1. This adapter is not a charger, it only outputs the voltage and power directly from your battery. 2. The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. 3. If you don't use it for a long time, please be sure to remove the battery from the adapter

Read more Read less

Azocek Upgraded Power Wheel Adapter Compatible with Milwaukee 18V Battery – with Overdischarge & Overcurrent Protection, Switch, for DIY RC Cars, Toys, Robotics

Power Tool Battery Converters

Buy on Amazon Find on eBay

Upgraded Protection & Performance: Our Azocek battery adapter has a built-in smart chip with over-current, over-discharge, short-circuit, and low-voltage protection. Ensure your battery and devices are fully protected. The heat-resistant ABS material and premium 12AWG wire are configured for high-power applications for increased safety and conductivity

Convenient Switch with Indicator: The Azocek power wheel battery adapter features an integrated push-button switch and LED indicator for convenience and safety. The LED light shows the product's operating mode. If the battery enters low-power mode due to overcurrent or low voltage, the LED will flash, alerting to the current state of the battery

Compatibility: Perfectly compatible with 18V Lithium batteries, works with 48-11-1815, 48-11-1850, 48-11-1820, 48-11-1840, 48-11-1815 etc. Our battery adapter connector fits snugly, ensuring easy installation and secure battery locking. (Note: Battery not included)

Widely Applicable: Use this Azocek battery adapter to power other devices. The maximum allowable current is 30A for 12AWG wire. Ideal for upgrading your power wheel, remote control toys, RC car, work lights, robotics DIY, and more. If you don't use it for a long time, please be sure to remove the battery from the adapter

Important Note: 1. This power wheel adapter is not a charger, it only outputs the voltage and power directly from your battery. 2. The battery converter is equipped with wiring terminals, the red wire is connected to the positive terminal, and the black wire is connected to the negative terminal. When using, make sure the positive and negative wires correspond correctly

Read more Read less

Azocek Jumper Cable Clamps Compatible with Milwaukee 18V Battery, Azocek 5.9FT 8AWG Portable Battery Jumper Starter Automotive Booster Cables for Jump Starting Using Tool Tool

Battery Jumper Cables

Buy on Amazon Find on eBay

Jumper Cable Clamps: The Azocek jump starter cable is designed to be compatible with 18V batteries. When your car battery drains and leaves you stranded, It may be difficult to find someone to help jump-start your car. Our jumper cables offer you a new solution, Only need to move the power adapter into the groove, Then push the converter and ensure it has locked the battery

High Quality: Our Azocek adapter is made of robust ABS plastic with a convenient, slip-resistant design. It features high-quality tinned copper wire cores for excellent conductivity and flexibility. The cables are covered with fire-resistant silicone rubber insulation, and the clamps are made with fully-insulated materials to prevent sparking

Easy to Operation: To use Jump Starter, first connect the red battery clamp to the vehicle's positive terminal (+) and the black clamp to the negative terminal (-). Then, plug jumper cable adapter into your battery tightly. Next, Start the car and then remove the clamps

Specifications: Wire: 8-AWG, The applicable range is 12-24v voltage. Perfect for most motorcycles, Cars, and SUVs, Capable of jumpstarting up to 5.0L gasoline and 3.0L diesel engines

Important Safety Notes: Do not reverse the operational sequence of the emergency starter. Handle the product with care and avoid overloading it. Check your device's power requirements before use. Once the vehicle is started, remove the jumper starter from the car within 30 seconds to prevent potential safety hazards. Make sure your portable power source supports your vehicle, as the starter power does not convert or step down voltage

Read more Read less

Power Wheel Azocek Adapter Compatible with Milwaukee 18V Battery with Wire Harness Connector Compatible with 12 Volt Power Wheel, 12AWG Wire with 40A Fuse

Power Tool Battery Converters

Buy on Amazon Find on eBay

Wire Harness Connector Compatible: Perfectly compatible with Fisher-Price 12 volt power wheel, this wire harness connector can safely connect to the standard 12 volt SLA and lithium battery riding toys

Azocek Battery Adapter Compatible: Perfectly compatible with Mil-wau-kee 18V lithium batteries, works with 48-11-1815, 48-11-1850, 48-11-1820, 48-11-1840, 48-11-1815 etc. Our battery adapter is well-design, snugly fit your battery, easy to install and remove(Note: battery not included)

More Convenient: The Azocek battery adapter comes with Wire Harness Connector, with a fuse holder and three 40A fuses, screws, and drywall anchors. Rich accessories to make your DIY work easier, and ideal for 12V Riding Toys! (Note: battery not included)

Widely Applicable: Use this battery adapter to power the standard 12 volt SLA and lithium battery riding toys . The max allowable current is 20A for 12AWG wires. You can safely upgrade your toy cars without changing the existing circuits

Important Note: This adapter is not a charger, it only outputs the voltage and power directly from your battery. If you don't use it for a long time, please be sure to remove the battery from the adapter. If you have any questions, please feel free to consult us

Read more Read less

Azocek for Power Wheel Adapter Compatible with Dewalt 20V Battery with Wire Harness Connector Compatible with Peg-Perego 12V Children Ride-on Car, 12AWG Wire with 40A Fuse

Buy on Amazon Find on eBay

Wire Harness Connector Compatible: Perfectly compatible with all Peg-Perego 12-volt ride-on toys, this wire harness connector can safely connect to the standard 12 volt SLA and lithium battery ride on toys

Battery Adapter Compatible: Perfectly compatible with Dewalt 18V/20V lithium batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter is well-design, snugly fit your battery, easy to install and remove

More Convenient: The battery adapter comes with Wire Harness Connector, with a fuse holder and three 40A fuses, screws, and drywall anchors. Rich accessories to make your DIY work easier, and ideal for 12V Riding Toys! (Note: battery not included)

Widely Applicable: Use this battery adapter to power the standard 12 volt SLA and lithium battery riding toys . The max allowable current is 20A for 12AWG wires. You can safely upgrade your toy cars without changing the existing circuits

Important Note: This adapter is not a charger, it only outputs the voltage and power directly from your battery. If you don't use it for a long time, please be sure to remove the battery from the adapter. If you have any questions, please feel free to consult us

Read more Read less

Azocek 2 Packs Power Wheel Adapter Compatible with Milwaukee 18V Battery Adapter Power Wheel Battery Converter Kit with Fuse & Switch & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Power Tool Battery Converters

Buy on Amazon Find on eBay

Better Safety: Our Azocek power wheel adapter design is upgraded with a fuse holder and switch, made of heat-resistant ABS material and 12AWG wire, which is more suitable for high-power applications, and improves safety and conductivity

More Convenient: The Azocek battery adapter comes with wire terminals, 30A fuses, screws, and drywall anchors. Rich accessories to make your DIY work easier, and ideal for indoor and outdoor use! (Note: battery not included)

Compatibility: Azocek adapter perfectly compatible with 18V lithium batteries, works with 48-11-1815, 48-11-1850, 48-11-1820, 48-11-1840, 48-11-1815 etc. Our battery adapter connector is well-design, snugly fit your battery, easy to install and remove(Note: battery not included)

Widely Applicable: Use this Azocek battery adapter to power other devices. The max allowable current is 20A for 12AWG wires. You can safely upgrade your toy cars, Rc trucks, robots, work lights, etc. Enjoy your DIY

Important Note: 1. This adapter is not a charger, it only outputs the voltage and power directly from your battery. 2. The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. 3. If you don't use it for a long time, please be sure to remove the battery from the adapter

Read more Read less

Azocek Multi-Functional USB Charger Adapter & 20V Battery Adapter Compatible with Dewalt 20V Battery, with 2 USB Ports & 1 Type-C Fast Charging Ports, with DC XT60 Port for DIY(1-Pack)

Power Tool Battery Chargers

Buy on Amazon Find on eBay

3 Charging Ports: This 20V battery adapter features 2 USB-A ports and 1 Type-C charging port, enabling fast charging for cell phones, tablets, and other electronic devices. It can charge up to 3 devices simultaneously. When using a single port, the USB-A output is QC 18W Max, and the Type-C output is PD 30W Max

Multi-Function XT60 Port: The XT60 port outputs DC 20V/Max 20A(Resistive Load) and supports quick plug-and-play for fast replacement of power devices. It's suitable for a variety of DIY projects including LED work lights, electric toy cars, and more

Applicable Battery Models: Perfectly compatible with Dewalt 18V/20V batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter connector is well-designed, snugly fits your battery, easy to install and remove

Safety and Security: The battery adapter is equipped with overload, no-load power-off, over-current, and low-voltage protection. The XT60 port cuts off output in the event of an overload (approx 20A resistive load) or a short circuit

More Convenient: The easy-to-operate micro-action buttons control the switching between the unit's multiple output modes. Two LED indicators display the product's mode of operation. If the battery voltage drops too low (approx 15V), the LED blinks to warn of a low battery

Read more Read less

18V to 12V Step Down Converter Compatible with Ryobi 18V Battery Adapter, Voltage Converter DC 12V 15A 180W Buck Converter Regulator, Power Wheel Adapter with Switch, 30A Fuse & Wire Terminal

Power Tool Battery Converters

Buy on Amazon Find on eBay

Step Down Converter: Input voltage range: DC 18V-20V; Output voltage: DC 12V; Output current: 15A Max; Output Power 180W

Better Safety: Voltage regulator built-in smart chip, features over-current, over-voltage, over-load, short-circuit, over-heat multiple intelligent protection, protect your devices from damage. Power wheel battery adapter also have added switch ensures you can turn on&off the battery easily, along with a fuse holder and a 30A fuse for added safety

Compatibility: Perfectly compatible with Ryobi 18V lithium batteries, works with P102, P103, P104, P105, P107, P108, P109, PBP002, PBP003, PBP004, PBP005, PBP006, P189, P190, P191, P192, P193, P194, P195, P197, BPL-1820G, BPL-1815, BPL-18152 etc. Our battery adapter connector fits snugly, ensuring easy installation and secure battery locking

Easy to Use: We combine the battery adapter and the voltage converter with 2 heat-resistant wires ＆ fuse holder, make it more convenient to use, just install the battery to the battery adapter and then connect the voltage converter to your device. (Note: Battery NOT Included)

Widely Applicable: The step down converter suitable for various 12V devices, ideal for upgrading power tools, ride on toys, RC car, golf carts, monitoring equipment, led strip light, work lights, robotics DIY , and more. If you don't use it for a long time, please be sure to remove the battery from the adapter

Read more Read less

Azocek Multi-Functional USB Charger Adapter & Upgrade Battery Adapter Compatible with 18V Battery, with 2 USB Ports&1 Type-C Fast Charging Ports, with DC XT60 Port for DIY(1-Pack)

Power Tool Battery Converters

Buy on Amazon Find on eBay

3 Charging Ports: This Azocek 18V battery adapter features 2 USB-A ports and 1 Type-C charging port, enabling fast charging for cell phones, tablets, and other electronic devices. It can charge up to 3 devices simultaneously. When using a single port, the USB-A output is QC 18W Max, and the Type-C output is PD 30W Max

Multi-Function XT60 Port: The XT60 port outputs DC 18V/Max 20A(Resistive Load) and supports quick plug-and-play for fast replacement of power devices. It's suitable for a variety of DIY projects including LED work lights, electric toy cars, and more

Applicable Battery Models: This Azocek adapter is perfectly compatible with Red 18V batteries, including models like 48-11-1815, 48-11-1850, 48-11-1820, 48-11-1840, and 48-11-1815. The connector is designed to snugly fit the battery, ensuring easy installation and removal

Safety and Security: The battery adapter is equipped with overload, no-load power-off, over-current, and low-voltage protection. The XT60 port cuts off output in the event of an overload (approx 20A resistive load) or a short circuit

More Convenient: This Azocek adapter is easy to operate with micro-action buttons that control multiple output modes. Two LED indicators show the operational status of the unit. If the battery voltage is too low (approx 15V), the LED will blink to alert you to the low battery condition

Read more Read less

3 Packs for Power Wheel Adapter Compatible with Dewalt 20V Battery, Converter Kit with Fuse & Switch & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Power Tool Battery Converters

Buy on Amazon Find on eBay

Better Safety: Our 20V battery adapter design is upgraded with a fuse holder and switch, made of heat-resistant ABS material and 12AWG wire, which is more suitable for high-power applications, and improves safety and conductivity

More Convenient: Azocek battery adapter comes with wire terminals, 30A fuses, screws, and drywall anchors. Rich accessories to make your DIY work easier, and ideal for indoor and outdoor use! (Note: battery not included)v

Compatibility: Perfectly compatible with Dewalt 18V/20V lithium batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter connector is well-design, snugly fit your battery, easy to install and remove

Widely Applicable: Use this battery adapter to power other devices. The max allowable current is 20A for 12AWG wires. You can safely upgrade your toy cars, Rc trucks, robots, work lights, etc. Enjoy your DIY

Important Note: 1. This adapter is not a charger, it only outputs the voltage and power directly from your battery. 2. The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. 3. If you don't use it for a long time, please be sure to remove the battery from the adapter

Read more Read less

Azocek

Azocek Best Sellers

Azocek 220W Power Inverter Compatible with Dewalt 20V Battery, DC 20V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light

220W Azocek Power Inverter Compatible with Milwaukee 18V Battery, DC 18V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light

Azocek LED Work Light Compatible with Dewalt 20V Battery, 40W 6000LM Flashlight, 20V Battery Cordless Work Light 120°Adjustable with Low Voltage Protection for Outdoors and Job Site Lighting

2 Packs Azocek LED Work Light Compatible with Mil-wau-kee 18V Battery, 40W 6000LM Flashlight,18V Battery Cordless Work Light 120°Adjustable with Low Voltage Protection for Outdoors Job Site Lighting

220W Azocek Power Inverter Compatible with Milwau-kee 18V Battery, DC 18V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light (2-Pack)

Azocek 18V to 12V Step Down Converter Compatible with Milwaukee 18V Battery Azocek Power Wheel Battery Adapter DC 12V 20A 240W Buck Converter Regulator with 30A Fuse & Wire Terminal

Azocek 350W Power Inverter Pure Sine Wave Compatible with Milwaukee 18V Battery (No Battery), 7A Fast Charger, Portable Power Station with 2 AC Outlets, 2 Type-C (140W/65W), 2 USB Ports, 600LM LED

New Upgrade Azocek LED Work Light Compatible with Mil-wau-kee 18V Battery, 48W 4800LM Flashlight, 18V Battery Cordless Work Light with Low Voltage Protection & Dual USB & Type-C Charging Port (48W)

Azocek 20V to 12V Step Down Converter 20A 240W Max - Compatible with DeWalt 20V Battery, Power Wheel Battery Adapter, DC 12V Buck Regulator with 30A Fuse & Wire Terminal

Azocek 2 Packs DM18D Battery Adapter Converter with USB Port for Dewalt 18V Tools, Converts for De-Walt 20V for Mil-Waukee 18V Li-ion to De-Walt 18-V Battery Adapter

for Power Wheel Adapter Compatible with Dewalt 20V Battery Converter Kit with Switch & Fuse & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Azocek Upgraded Power Wheel Adapter Compatible with Milwaukee 18V Battery – with Overdischarge & Overcurrent Protection, Switch, for DIY RC Cars, Toys, Robotics

Azocek Jumper Cable Clamps Compatible with Milwaukee 18V Battery, Azocek 5.9FT 8AWG Portable Battery Jumper Starter Automotive Booster Cables for Jump Starting Using Tool Tool

Power Wheel Azocek Adapter Compatible with Milwaukee 18V Battery with Wire Harness Connector Compatible with 12 Volt Power Wheel, 12AWG Wire with 40A Fuse

Azocek for Power Wheel Adapter Compatible with Dewalt 20V Battery with Wire Harness Connector Compatible with Peg-Perego 12V Children Ride-on Car, 12AWG Wire with 40A Fuse

Azocek 2 Packs Power Wheel Adapter Compatible with Milwaukee 18V Battery Adapter Power Wheel Battery Converter Kit with Fuse & Switch & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Azocek Multi-Functional USB Charger Adapter & 20V Battery Adapter Compatible with Dewalt 20V Battery, with 2 USB Ports & 1 Type-C Fast Charging Ports, with DC XT60 Port for DIY(1-Pack)

18V to 12V Step Down Converter Compatible with Ryobi 18V Battery Adapter, Voltage Converter DC 12V 15A 180W Buck Converter Regulator, Power Wheel Adapter with Switch, 30A Fuse & Wire Terminal

Azocek Multi-Functional USB Charger Adapter & Upgrade Battery Adapter Compatible with 18V Battery, with 2 USB Ports&1 Type-C Fast Charging Ports, with DC XT60 Port for DIY(1-Pack)

3 Packs for Power Wheel Adapter Compatible with Dewalt 20V Battery, Converter Kit with Fuse & Switch & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Azocek FAQs

Azocek

Azocek Best Sellers

Azocek 220W Power Inverter Compatible with Dewalt 20V Battery, DC 20V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light

220W Azocek Power Inverter Compatible with Milwaukee 18V Battery, DC 18V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light

Azocek LED Work Light Compatible with Dewalt 20V Battery, 40W 6000LM Flashlight, 20V Battery Cordless Work Light 120°Adjustable with Low Voltage Protection for Outdoors and Job Site Lighting

2 Packs Azocek LED Work Light Compatible with Mil-wau-kee 18V Battery, 40W 6000LM Flashlight,18V Battery Cordless Work Light 120°Adjustable with Low Voltage Protection for Outdoors Job Site Lighting

220W Azocek Power Inverter Compatible with Milwau-kee 18V Battery, DC 18V to AC 110V Portable Power Station with 1 AC Outlet, 2 USB Ports & 1 Type-C Fast Charging, 400LM LED Work Light (2-Pack)

Azocek 18V to 12V Step Down Converter Compatible with Milwaukee 18V Battery Azocek Power Wheel Battery Adapter DC 12V 20A 240W Buck Converter Regulator with 30A Fuse & Wire Terminal

Azocek 350W Power Inverter Pure Sine Wave Compatible with Milwaukee 18V Battery (No Battery), 7A Fast Charger, Portable Power Station with 2 AC Outlets, 2 Type-C (140W/65W), 2 USB Ports, 600LM LED

New Upgrade Azocek LED Work Light Compatible with Mil-wau-kee 18V Battery, 48W 4800LM Flashlight, 18V Battery Cordless Work Light with Low Voltage Protection & Dual USB & Type-C Charging Port (48W)

Azocek 20V to 12V Step Down Converter 20A 240W Max - Compatible with DeWalt 20V Battery, Power Wheel Battery Adapter, DC 12V Buck Regulator with 30A Fuse & Wire Terminal

Azocek 2 Packs DM18D Battery Adapter Converter with USB Port for Dewalt 18V Tools, Converts for De-Walt 20V for Mil-Waukee 18V Li-ion to De-Walt 18-V Battery Adapter

for Power Wheel Adapter Compatible with Dewalt 20V Battery Converter Kit with Switch & Fuse & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Azocek Upgraded Power Wheel Adapter Compatible with Milwaukee 18V Battery – with Overdischarge & Overcurrent Protection, Switch, for DIY RC Cars, Toys, Robotics

Azocek Jumper Cable Clamps Compatible with Milwaukee 18V Battery, Azocek 5.9FT 8AWG Portable Battery Jumper Starter Automotive Booster Cables for Jump Starting Using Tool Tool

Power Wheel Azocek Adapter Compatible with Milwaukee 18V Battery with Wire Harness Connector Compatible with 12 Volt Power Wheel, 12AWG Wire with 40A Fuse

Azocek for Power Wheel Adapter Compatible with Dewalt 20V Battery with Wire Harness Connector Compatible with Peg-Perego 12V Children Ride-on Car, 12AWG Wire with 40A Fuse

Azocek 2 Packs Power Wheel Adapter Compatible with Milwaukee 18V Battery Adapter Power Wheel Battery Converter Kit with Fuse & Switch & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Azocek Multi-Functional USB Charger Adapter & 20V Battery Adapter Compatible with Dewalt 20V Battery, with 2 USB Ports & 1 Type-C Fast Charging Ports, with DC XT60 Port for DIY(1-Pack)

18V to 12V Step Down Converter Compatible with Ryobi 18V Battery Adapter, Voltage Converter DC 12V 15A 180W Buck Converter Regulator, Power Wheel Adapter with Switch, 30A Fuse & Wire Terminal

Azocek Multi-Functional USB Charger Adapter & Upgrade Battery Adapter Compatible with 18V Battery, with 2 USB Ports&1 Type-C Fast Charging Ports, with DC XT60 Port for DIY(1-Pack)

3 Packs for Power Wheel Adapter Compatible with Dewalt 20V Battery, Converter Kit with Fuse & Switch & Wire Terminals & 12 AWG Wire for DIY RC Car Toys Robotics

Azocek FAQs

Similar Brands