DiGiYes feature image

DiGiYes

Review rating Review rating Review rating Review rating Review rating 4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, DiGiYes has 136 products for sale. DiGiYes products range in price from $6.89 to $22.99, and the average price of all the products is about $10.79. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase DiGiYes products from the seller DiGiYes-US. The brand holds an average rating of 4.9, testifying to its excellent reputation.

DiGiYes Best Sellers

Last Updated: Jan 11, 2025

DiGiYes 4Pcs VL53L0X Time-of-Flight (ToF) 940nm Laser Ranging Sensor Breakout GY-VL53L0XV2 Distance Measurement Module Fit for Arduino

The VL53L0X time-of-flight range sensor is a next generation laser range module. The VL53LOX is a fully integrated sensor with embedded infrared, human eye safe laser, advanced filters and ultra high speed photon detection arrays for longer range, speed and accuracy.
The VL53LOX ToF laser ranging module housed in the smallest package on the market today, providing accurate distance measurement whatever the target reflectance unlike conventional technologies. It can measure absolute distances up to 2m, setting a new benchmark in ranging performance levels, opening the door to various new applications.
The VL53LOX integrates a leading-edge SPAD array (Single Photon Avalanche Diodes) and embeds second generation flight sense patented technology.
The VL53LOX's 940nm VCSEL emitter (Vertical Cavity Surface Emitting Laser), is totally invisible to the human eye, coupled with internal physical infrared filters, it enables longer ranging distance, higher immunity to ambient light and better robustness to cover glass optical cross-talk.
The sensing capability of the VL53LOX can support a wide range of functions including gesture or proximity detection for a variety of innovative user interfaces, obstacle detection and collision avoidance systems for floor sweepers and service robots, user presence detection or power on/off monitors for home appliances and laptops, as well as drones and Internet of Things (IoT) products.

DiGiYes GT2 Timing Belt Idler Pulley 20 Toothless 5mm Bore 10mm Width Timing Belt Idler Pulley Wheel for 3D Printer

Product Contain: 5 x Timing belt pulleys, suitable for 10mm wide timing belt
Size: Teeth Type 20 Toothless, Bore 5mm.
Material: High quality Aluminum, Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively.
Double bearings: Use High-quality Motor-grade bearings to ensure that the machine is works good.
Application: Widely used in milling machines, gear forming machines, drilling machines, CNC machine tools, hobbing machines or other mechanical transmission applications.

DiGiYes L293D DC Motor Drive Stepper Motor Drive Shield Expansion Board Fit for Arduino / Duemilanove / Raspberry Pi

This is a commonly used DC motor drive module, which uses 293D chip to drive small current DC motor.
It can drive 4-way DC motor or 2-way stepping motor and 2-way steering gear, support Arduino UNO / Mega 2560.
Two 5V servo motor (steering gear) ports are connected to the high-resolution and high-precision timer without jitter.
Up to 4 bidirectional DC motors and 4-way PWM speed regulation (about 0.5 percent resolution); Up to 2 stepper motors for forward and reverse control, single / double step control, staggered or micro step and rotation angle control.
4-way H bridge: L293D chip provides 0.6A (crest 1.2A) current for each bridge, with thermal power off protection, 4.5V to 36V.

DiGiYes 2Pack MG90S Micro Servo Motor Metal Geared 9G for Helicopter Airplane Boat Smart Robot Car Controls (Control Angle 180 Degree)

[Wiring] Dark Gray: GND, Red: VCC 4.8-7.2V, Orange: Pulse Input, Interface Type: JR / FUTABA General.
[Structure] Consist of Copper metal teeth, coreless motor, double ball bearing, which is strong, reliable and sturdy.Attached Accessories: Multi-arms, 30cm wire, fixing screws.
[Work Perfectly] The rotation angle is about 180 degrees (90 degrees in each direction) .The raction speed is 0.1sec/60 degrees(4.8v), 0.08sec/60 degrees(6v).
[Widely Used] The metal gear servo micro can be compatible with 450 Electric Helicopter, Swash Plate Steering Gear, Fixed Wing, Model Aircraft RC Helicopter Plane Boat Car.
[Package Content] 2 Pack MG90S Mini 9G Micro Servo Metal Geared Motor,Product Size: 0.89*0.48*1.12inch(22.8x12.2x28.5mm).

DiGiYes Precise Function Signal Generator XR2206 1Hz-1MHz Adjustable Sine Triangle Square Output Frequency Module

XR2206 precise function signal generator, this module is a welded finished product that does not require manual welding. You only need to assemble the shell to use it.
Power supply for 5.5 * 2.1 port, the inside is positive and the outside is negative polarity, fitting for 9-12V power supply voltage. The waveform may not be stable for more than 12V.
After completing the connection, before powering on, check the IC whether against, such as anti please timely correction, insert the might damage the chip.
The frequency amplitude is adjustable, and the frequency adjustable range is 1Hz-1MHz.
Wide range of power supply, can use 9-12V external power supply or 9V battery.

DiGiYes 10PCS MAX485 RS485 Transceiver Module TTL UART Serial to RS485 Instrument Interface Module 5V Development Accessories Board

The onboard MAX485 chip is a low-power, swing limiting transceiver for RS-485 communication.
The MAX485 is a low power transceiver used to communicate between RS-485 and RS-422. Each device has a driver and a receiver.
The MAX485 has unlimited drive swing rate and can achieve transfer rates up to 2.5Mbps.
On board connection with 5.08(mm) spacing 2P terminal, convenient for RS-485 communication wiring.
All pins of the chip have been led out, which can be controlled and operated by the Single-Chip microcomputer.

DiGiYes 2 Pack SG90 Micro Servo Motor 9G Mini Servo Kit for RC Robot Arm/Hand/Control with Cable (Control Angle 360 Degree)

Interface Type: Compatible with JR & Futaba interface. Micro servo running speed (at no load) : 0.09±0.01 sec/60 degree (4.8V) 0.08 ± 0.01 sec/60 degree(6V). Running angle: 180 degree.
SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
Stall Torque (4.8V): 1.6kg/cm; Operating voltage: 4.2V~ 6V; Temperature range: 0 to 55; Operating Speed: 0.1sec/60degree; Dead band width: 10usec.
The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
Mini servo SG90 is tiny and lightweight with high output power.

DiGiYes 5 Pack DC 5-120V Digital Mini Voltmeter 2 Wire 0.56 inch LED Display Panel for Motorcycle Battery Monitor (Green)

Voltmeter measuring range 5-120V, using 2-wire system, line length 20cm, without independent power supply, directly connected to the power supply can display the current power supply voltage. The operating current is less than 20mA, low heat, high efficiency.
The voltage display meter is perfect to monitor the condition of the battery, for 24V / 36V / 48V / 60V / 72V / 96V motorcycle, electric vehicle, car, trailer, truck, boat, etc.
The DC volt meter has a three digit 0.56 inch digital LED tube, display color: Red / Green, display bright and clear, it's easy to read the digits.
The smart chip of the digital voltmeter has quick response and accuracy. The accuracy is +/-1 percent. Refresh rate: 300ms/time. The screw on the back allows you to Calibrate the meter.
Equipped with reverse polarity protection: If the polarity is reversed, the voltmeter will not burn out, but there will be no display on the screen. Correct connection: Connect the positive pole in red and the negative pole in black.

DiGiYes AC Motor Speed Controller Fit for Fan Electric Motor Router Rheostat, SCR Voltage Controller 110V 220V 18A 4000W Max

This is a stepless adjustable voltage speed controller, the input voltage is AC 110V / 220V, the output voltage is 10-110V / 10-220V (stepless adjustable), the maximum power is 4000W, the rated current is 9A, can withstand a maximum current of 18A.
The voltage controller has variable thyristor and electronic voltage regulator. The maximum power of connecting inductive loads (such as fans, routers) is about 2000W, and the limit power of connecting resistive loads (such as electric furnaces, heating wires) is 4000W.
The output voltage of the product is a virtual voltage when there is no load. When a load (20W or more) is connected, the actual output voltage value is shown on the display. This motor speed controller is equipped with a new bi-directional high power SCR inside. You can easily control the speed of your motor to your desired level using the rheostat.
Our voltage stabilizer adopts high premium chip thyristor, all aluminum heat sink is suitable for high temperature circuits, and adopts multi-functional industrial sockets. The copper parts are thicker inside, with high current, good contact and high safety. The fan speed control switch has a power light, and the heat dissipation connector can help quickly dissipate heat and prevent burnout.
Zero lag, zero delay, with peak-voltage absorption circuit to effectively protect high power Thyristor anti surge, anti peak-voltage, RC absorption multiple protection.

DiGiYes 25KG High Torque Digital Servo Full Metal Gear with 25T Servo Horn for 1/8, 1/10, 1/12 RC Car Robot Control Angle 180°

The maximum torque of this remote control servo motor is 25KG/CM. The voltage is 4.8-6.8V, the running angle is 180 degrees, and the weight is 68g. The length of the power cord is 11.8inch / 30cm, and it is also equipped with a 25T adjustable metal servo arm
Equipped with high-precision potentiometers and high-resolution digital chips, its accuracy and linearity are greatly improved, ensuring stable performance, fast response, and strong anti-interference ability, thereby extending its service life
This digital RC servo uses metal gears and dual ball bearings, with excellent workmanship, outstanding performance, and low noise. The anodized aluminum shell has excellent heat dissipation performance, which can effectively reduce power consumption and provide strong power
This RC motor is made using high-precision and thoroughly sealed technology, with IP67 waterproof capability, and can work normally even in the event of water splashes
Compatible with1/8, 1/10, 1/12 RC cars, Robots and any application where standard servos are used

DiGiYes A4988 DRV8825 Stepper Motor Driver Control Extension Shield Board for 3D Printer, Step Motor Extension Module

The A4988 / DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
Jm connects the motor. Jv connects 5V and 12V-24V power supplies.
Jc E S D G corresponds to the Enable Step Direction Gnd drive signal output on the connection.
The steering and speed of the four wire stepper motor is controlled by toggling the dip switches on the stepper motor driver expansion board. Different combinations of dip switches have different effects on the steering and speed of the four wire stepper motor.
Connect the DRV8825 module: The stepper motor dip switch 1, 2, 3 are turned to the ON, at this time in the 32 subdivision state, the stepper motor speed is slow, clockwise half turn anticlockwise 1 turn, repeat the cycle.

DiGiYes 120pcs Breadboard Jumper Wires 10cm 40pin Female to Female Multicolored Connection Wire for Arduino

Connector Type: Standard 2.54mm Pitch 1Pin-1Pin Dupont Housing Connector, with brass nickel plated terminals, provides excellent electrical conductivity and oxidation resistance.
Package include: 3 x 40pin Female to Female jumper wires (Total 120pcs).
Cable length: 10cm (3.9 inch) / Cable material: 12-core pure copper wire.
Cable Feature: The dupont wires can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.
Application: For Raspberry pi / Parallax / DIY experiment / Electronic projects / Arduino breadboard / PC motherboard / PCB project.

DiGiYes GT2 Timing Belt 5M (16.4ft) Length Open Belt 2mm Pitch 6mm Width Rubber Fiberglass

GT2 timing belt is made of rubber, fiberglass reinforced, 6mm width timing synchronous belt for 3D printer.
This belt with function of shock absorption, low noise, high quality workmanship and long service life.
Non-slip, low noise, high transmission efficiency, and greatly improve your work.
High-strength structural design, anti-extension, make the transmission more stable.
Suitable for dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, conveyor, bonders ect.

DiGiYes 2 Pack ES08MA II 12g Mini Metal Gear Analog Servo for RC Model, High Speed Servo Analog Gear

ES08MA ll 12g high sensitivity micro servo, all metal high-precision gears, fast response speed, light weight, shockproof, low noise, wear-resistant and durable.
Working voltage: 4.8V - 6.0V; Working speed: 0.12 seconds/60 degrees (4.8V), 0.10 seconds/60 degrees (6V).
High precision gear combination, all gears have been optimized, smooth and delicate, stable operation, and are not prone to tooth jamming and collapse.
Professional motor design, fast response speed, and powerful operation. High temperature resistance and high current resistance.
After precise mechanical calculations, the angle and opening position of the rocker arm are optimized to make the servo force more effective.

DiGiYes 20Pcs Mini Vibration Motors DC 3V 12000rpm 10mmx3mm Flat Coin Button-Type Micro Vibrating Motor for Mobile Cell Phone Tablet

1030 Micro vibration motor. Outer diameter: 10mm; Thickness: 3.0mm; Rated voltage: DC 3V; Rated current: 80mA; Rated speed: 12000 RPM; Voltage range: DC 2.5 - 4V.
Using a copper alloy shell, it is rust resistant and corrosion resistant, with good thermal conductivity and electromagnetic interference resistance.
dopting high-strength premium copper wire, with stable electrical performance, strong thermal conductivity, high hardness, high temperature resistance, pressure resistance, explosion resistance, and corrosion resistance.
Compact size, waterproof design, strong vibration, low noise, and long service life.
Widely used in industries such as electronic products, medical equipment, beauty equipment, massage equipment, health products, handicrafts, intelligent robots, etc.

DiGiYes Upgrade Metal Z Axis Stepper Motor Fixed Mount Installation Bracket Fit for Ender3 V2 Ender3 Pro CR-10S CR-10 V2/V3 CR10S Pro 3D Printer

This bracket is made of aluminum alloy material, and the upgraded design replaces the plastic bracket, making the Z-axis motor more stable and providing a better printing experience.
Only used for 2040 aluminum profiles Z axis 3D printer or CNC machine.
This bracket is fit for Nema 17 or 42 stepper motor use.
Compatible with most Creality 3d printers, such as ender 3 / Pro/ V2 /S1/S1 Pro, Ender 5 / Pro, CR-10/S, CR-10 S4/S5/V2/V3, and other 3d printers with 42 motor and 2040 profile in Z-axis.
Package: 1 Set Aluminum Bracket Kit.

DiGiYes DC Motor Speed Controller, Brush Motor Driver Controls Module DC 9V-60V 20A 1200W Motor Pulse Width Modulator Regulator PWM Monitor Dimmer Motor Speed Controller with Switch, Knob

The motor speed controller has an input voltage range of 9-60V, the output current range is 0-20A, the continuous current is 18A, and the maximum power can reach 1200W.
The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.
This motor control board can adjust the motor speed through a potentiometer and also supports clockwise / counterclockwise rotation adjustment.
Using pulse width modulation (PWM) method for dimming / speed regulation, with a speed range of 0-100 percent, high circuit efficiency, and the ability to fully utilize the electrical energy of the power supply.
Easy wiring. Connect the red wire to the positive pole of the power supply, and the black wire to the negative pole of the power supply; The blue wire is connected to the positive pole of the motor, and the green wire is connected to the negative pole of the motor.

DiGiYes 2Pcs Heat Bed Power Expansion Module 25A MOS Tube Mosfet for 3D Printer

This high power module is a general add-on heated bed power expansion module for 3D printer. With this add on module to your 3D printer motherboard, the maximum current up to 25A.
Heat bed high power expansion module, solve the problem of excessive power and current load due to hot bed, and can well protect the connectors on the controller board from overheating.
Very powerful MOSFET to withstand higher current than normal RAMPS or other 3D Printer controller can handle. Under the premise of normal cooling, it work stable under I(Max)=25A.
The best connection is made of new materials, stainless steel and the high grade aluminum blocks, which give longer product life.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

DiGiYes 10Pcs Active Piezo Buzzer SFM-27 DC 3-24V 95DB High Decibel Alarm Siren with 10pcs 9V Battery Connector for Motorcycle Car Scooter (White)

Package comes with 10 active buzzers and 10pcs battery connectors; Cable length approx. 15 cm / 5.9 inches.
Active piezo electronic buzzer module support DC 3-24V wide voltage power supply. It is a continuous tone. As long as it is been powered it will Beep continuously.
Sound Output: 100dB at 12V DC 30cm, Response Frequency: 3000±500Hz, these buzzers are very loud.
SFM-27-1 is an active buzzer with an internal oscillation source that can sound when powered on.
The soft shell battery button connector is made of plastic and metal. The plastic is not easy to break. The metal contact performance is good. The cable tail is easy to solder by immersion tin.

DiGiYes 4Pcs DC Electric Motor 3V-12V Dual Shaft Ratio 1:48 Geared TT Motor Magnetic Gearbox Engine for DIY Smart Car Robot Toys

TT Motor Robot Gear Motor, Load Current: 70mA (250mA MAX) (3V); Maximum Torque: 800 GF CM Min (3V) ; No-load Speed: 1:48 (3V).
The operating voltage of the motor is 3V - 12V DC, recommended to be 6V - 8V.
Pure copper wire surrounding, low current, good conductivity, low heat, stable operation.
This motor is equipped with EMC, anti-interference ability, no interference to the single chip microcomputer.
Use for electric toy products such as scientific research electronic products, robot electric human body, bubble gun toy gun body, four-wheel drive toy car, aircraft toy, vibration product, etc.

DiGiYes FAQs

Yes, DiGiYes is a legitmate brand on Amazon. After conducting a comprehensive analysis of 19 customer reviews for DiGiYes products on Amazon, we have determined its average rating. With a strong performance and good quality, DiGiYes has received an average rating of 4.9 from numerous buyers, indicating that DiGiYes are trustworthy and live up to their claims. Therefore, it is safe to make purchases from DiGiYes on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in DiGiYes and want to find more DiGiYes products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type DiGiYes in the search box and hit Enter to see the search results.
  3. Find and click the correct DiGiYes to go to the new page.
  4. Select the products you want in the DiGiYes buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more DiGiYes products.

We analyze millions of DiGiYes products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 136 DiGiYes products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the DiGiYes page.
  2. Select the product you want in the DiGiYes buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product DiGiYes 4Pcs VL53L0X Time-of-Flight (ToF) 940nm La..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the DiGiYes products, helping you make more informed buying decisions. We recommend best choices of the products from the DiGiYes brand, helping you make better shopping choices with less time and energy.