PAMEENCOS feature image

PAMEENCOS

Review rating Review rating Review rating Review rating Review rating 4.1

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, PAMEENCOS has 101 products for sale. PAMEENCOS products range in price from $5.99 to $30.99, and the average price of all the products is about $14.81. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase PAMEENCOS products from the seller WaterLong. The brand holds an average rating of 4.11, testifying to its excellent reputation.

PAMEENCOS Best Sellers

Last Updated: Jan 8, 2026

PAMEENCOS 1pcs MCU FT232H high-Speed Multi-Functional USB to JTAG UART FIFO SPI I2C Module Type-C IIC Connection

[Description] CJMCU-FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.
[Feature] Single channel USB to serial / parallel ports with a variety of configurations. Entire USB protocol handled on the chip. No USB specific firmware programming required. USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible. Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
[Specification] UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter). USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec. USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec. Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
[Function] CPU-style FIFO interface mode simplifies CPU interface design. Fast serial interface option. FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases. Adjustable receive buffer timeout.
[Application] Single chip USB to UART (RS232, RS422 or RS485). USB to FIFO. USB to FT1248. USB to JTAG. USB to SPI. USB to I2C. USB to Bit-Bang. USB to Fast Serial Interface. USB to CPU target interface (as memory).

PAMEENCOS 1pcs SCD40 Gas Sensor Module Detects CO2 CO2 Temperature and Humidity 2-in-1 I2C Communication

[Description] SCD40/SCD41 is the next generation of miniature carbon dioxide sensors, SCD40/SCD41 has high precision and cost-effective, the module with 2.54mm pitch pin interface to lead out the power supply and communication pins. On-chip temperature and humidity compensation is realized by the built-in temperature and humidity sensor to measure humidity and temperature.
[Feature] The SCD40/SCD41 enables intelligent regulation of indoor ventilation systems based on CO2 concentrations, and indoor air quality helps maintain a healthy, productive environment with low CO2 concentrations over a period of time.
[Specification] SCD40 CO2 measurement accuracy :±(50 ppm +5% MV); Measuring range :400-2000 ppm. Measuring range: 400-2000 ppm. Precision ±50 ppm. Relative humidity measurement range: 0 -95%RH, Typical relative humidity accuracy: 6%RH.
[Low Power] Run at low power to
[Pin Definition] GND: negative power input port. VDD: positive power input port. SCL:12C clock port. SDA:12C data port.

PAMEENCOS 5pcs 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier LNA Development Board

Maximum output power 12dBm (P1dB) (1-2000MHz) (if the post-stage has low-pass links, it can even reach 18dBm)
Frequency: 1-2000MHz, Gain: Gp>30dB, Noise figure: 2dB @500MHz
Output power: P1db>13dBm, Supply voltage: 9-12V, Operating current: about 30-40mA
35.8dB@100MHz, 35.8dB@300MHz, 35.6dB@500MHz, 32.6dB@1000MHz, 26.4dB@1500MHz, 19.6dB@2000MHz
A perfect match various circuits as ideal amplifier buffer amplifiers

PAMEENCOS 5pcs APDS-9930 ALS IR RGB and Proximity Sensor, Digital Proximity and Ambient Light Sensor, Gesture Sensor Proximity Sensor for Arduino

[Description] Optical modules integrated with Ambient Light Sensing (ALS), infrared LEDs and proximity detectors. Approximate human visual response.
[Application] Adjustable light mobile phone backlight. Notebook / display security. ASutomatically enabled hands-free mode Automatic menu pop up. Digital camera eye sensor.
[Feature] Approximate human visual response. Programmable interrupt capability with upper and lower thresholds. Up to 16-bit resolution. High sensitivity operation behind dark glass. 0.01lux low lumen performance. Proximity detection. Fully calibrated to 100 mm detection.
[Function] Integrated infrared LED and synchronous LED driver. Eliminates factory calibration of the proximity sensor. Programmable wait timer. Wait state power consumption - 90μA typical. Sleep Mode Power - 2.2μA typical.
[Communication] Programmable range from 2.7 ms to more than 8 seconds. I2C interface compatible Up to 400kHz (I2C fast mode). Dedicated interrupt pin.

PAMEENCOS 5pcs GY-MAX30102 MAX30102 Heart Rate Click Pulse Blood Oxygen Concentration Pulse Oximetry Sensor Module (Purple Board) for Arduino

[Pulse Oximeter] A pulse oximeter measures the saturation of blood oxygen in the bloodstream.
[Health Monitoring Indicator] Oxygen saturation can reflect early medical problems such as the heart and lungs, this reading is useful as a general health monitoring indicator.
[Working Principle] Oxygenated hemoglobin absorbs more infrared light than red light, while deoxyhemoglobin absorbs more red light than infrared light. Therefore, the red and infrared leds in the oximeter alternately emit light, and the photodiode receives the light signal that is not absorbed. The ratio of red and infrared light received by the photodiode is used to calculate the percentage of oxygen in the blood.
[Addition] According to the pulsation characteristics of the arterial blood flow, the pulse rate and intensity are also determined during the measurement.

PAMEENCOS 2Pcs BME680 CJMCU-680 Temperature and Humidity Pressure Sensor Module, Low Power Gas, Ultra-Low Pressure Sensor, Height Development Board

The BME680 is a digital 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA package with a footprint of only 3.0 × 3.0 mm² with a maximum height of 1.00 mm (0.93 ± 0.07 mm). Its small dimensions and its low power consumption enable the integration in battery-powered or frequency-coupled devices, such as handsets or wearables.
Typical applications: Indoor air quality. Home automation and control. Internet of things. Weather forecast. GPS enhancement (e.g. time-to-first-fix improvement, dead reckoning, slope detection). Indoor navigation (change of floor detection, elevator detection). Outdoor navigation, leisure and sports applications. Vertical velocity indication (rise/sink speed).
Target Devices: Handsets such as mobile phones, tablet PCs, GPS devices. Wearables. Home weather stations. Smart watches. Navigation systems. Gaming, e.g. flying toys. IOT devices.
Supply voltage: VDD main supply voltage range: 1.71 V to 3.6 V, VDDIO interface voltage range: 1.2 V to 3.6 V. Current consumption: 2.1 µA at 1 Hz humidity and temperature, 3.1 µA at 1 Hz pressure and temperature, 3.7 µA at 1 Hz humidity, pressure and temperature, 0.09‒12 mA for p/h/T/gas depending on operation mode, 0.15 µA in sleep mode.
Operating range: -40‒+85 °C, 0‒100% r.H., 300‒1100 hPa. Individual humidity, pressure and gas sensors can be independently enabled/disabled.

PAMEENCOS 3pcs ACS758 ACS758LCB-050B-PFF-T Linear Hall Current Sensor Module ACS758LCB Current Module

Industry-leading noise performance through proprietary amplifier and filter design techniques.
Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high voltage applications.
Total output error improvement through gain and offset trim over temperature. Small package size, with easy mounting capability. Monolithic Hall IC for high reliability.
Ultra-low power loss: 100 μΩ internal conductor resistance.Galvanic isolation allows use in economical, high-side current sensing in high voltage systems. 3.0 to 5.5 V, single supply operation.120 kHz typical bandwidth.3 μs output rise time in response to step input current.
Output voltage proportional to AC or DC currents. Factory-trimmed for accuracy. Extremely stable output offset voltage. Nearly zero magnetic hysteresis.

PAMEENCOS Women Bracelet Gift for Mohters Day (Dear Mom), 8

[Gifts for Mom] -- Give a special gift to Mom on a special day to show our love for Mom. Just like the touching words on the card, "Dear Mom, even when I'm not close by, I want you to know I appreciate you and love you forever. Wear the balacelet on your wrist. It will remind you that mother&daughter never truly apart.“ We love our Mom forever.
[Material] -- Stylish tiny pearl bracelet is made of stainless steel with 14K Gold Plating, Nickel-free, Lead-free, Cadmium-free, hypoallergenic, and suitable for skin.
[Size] - The bracelet size is 6.5" + 1.5" extension chain, card size is 3.15'' x 3.15''. The bracelet length fits most people's size. A stylish, stackable design to put on everyday.
[Suitable for All Occasions] --Freshwater pearl bracelets are a classic fashion accessory. White pearls also symbolize health, happiness, and purity. The bracelet comes with a meaningful gift card, and all items are packed in one bag. A great gift for any occasion, Birthday, Thanksgiving, Christmas, Mother's Day, Wedding day.
[SALES SERVICE ] -- Your happiness is our happiness! Just feel free to contact us if you have any problems with our products. We hope our products will give you satisfaction!

PAMEENCOS 5pcs GY-BME280-3.3 BME280 3.3V High Precision Atmospheric Pressure Sensor Altimeter Module GY-BME280-3.3 Temperature Humidity Sensor Module for Arduino

[ASPM Technology] BME280 is a small package and low-power digital composite sensor of Advanced Porous SiliconMembrane technology, which can measure ambient temperature, humidity and atmospheric pressure.
[Sensor Features] The humidity sensor has fast wake up and response time, high precision and wide temperature operating range; The pressure sensing element is a piezoresistive low noise, high precision and high resolution absolute atmospheric pressure sensing element. The temperature sensing element has the characteristics of low noise and high resolution, and the temperature value can be self-corrected by temperature compensation for humidity and air pressure.
[Range & Accuracy & Resolution] Temperature measurement range :0℃~65℃ Temperature measurement error :±0.5℃ MAX±1℃; Resolution 0.1℃ Relative humidity measurement range :0%~100% Humidity response time: greater than 1s relative humidity measurement error :±2%; Humidity lag :±1%; Resolution 0.8% Pressure measurement range :300~1100hPa(HPa) Pressure measurement error :±1hPa resolution 0.18Pa.
[Usage Instruction] The module determines the device address through SD0 pin in 12C mode. The SDO GND low-level slave address is 1110110(0x76), and the default of this module is 0x76. High level slave address 1110111(0x77).
[Applications] Humidity sensors and air pressure sensors can be independently enabled/disabled by configuring the sample rate register, the sample rate of the sensor can be set, ideal for mobile devices with limited space, such as smart phones, tablets, smart watches and wearables, weather forecasts, vertical speed indicators, flight control devices, indoor and outdoor navigation, smart home devices.

PAMEENCOS 5pcs MCU230 Bus Transceiver SN65HVD230 CAN Communication Module

[Description] MCU230 Bus Transceiver SN65HVD230 CAN Communication Module.
[Feature] SN65HVD230 can be used in high interference environments. The device has good transceiver ability at different rates, fully compatible with ISO11898 standard, slope control, reduce radio frequency interference (RFI); Differential receiver with resistance to a wide range of common mode interference and electromagnetic interference (EMI).
[Specification] High input impedance, allowing 120 nodes; Low current waiting mode, typical current is 370μA; Signal transmission rate up to 1Mb/s.
[Safety] With thermal protection, open circuit failure protection function; It has the function of resisting instantaneous interference and protecting bus.

PAMEENCOS 1 Set MAX31865 PT100/PT1000 RTD 3.3/5V Temperature Thermocouple Sensor Amplifier Board Temperature Detector Module with -50 to 200°C 0.5m 3 Wires PT100 RTD Sensor Probe

[Easy-to-Use] MAX31865 is thermistor to digital output converter optimized for platinum resistance temperature detectors (RTDS).
[RTD Resistance to Digital Output] The external resistor sets the RTD sensitivity, and the high precision Delta-σ ADC converts the ratio of the RTD resistance to the reference resistance into a digital output.
[Safety and Protection] The MAX31865 input has overvoltage protection up to 45V and provides configurable RTD and cable open and short condition detection.
[PT100 Probe] PT100 probe line 0.5M PTFE line on -50~200°C with accuracy 0.5%.

PAMEENCOS 2pcs CN3791 MPPT Solar Panel Solar Charger 3.7V 4.2V Lithium Battery Charging Panel Module, 12V Solar Panel Charger Regulator Control Module, JST PH2.0 Auto Recharge for Battery

[Description] This is a solar charger for single lithium battery high-power point tracking (MPPT). This MPPT solar charger enables you to capture as much electricity as possible from a solar panel or other photovoltaic device and load it into a rechargeable lithium battery.
[Function] Solar power point tracking (MPPT) is to ensure that the light intensity changes and the photovoltaic cell outputs high power to make full use of solar energy. In general, it is necessary to use a switching mode DC-DC converter to implement the MPPT function, keeping the output voltage and charge current product maximized (output).
[Usage] The output of the solar charger is designed to charge a single polymer lithium-ion battery. The load should be in parallel with the battery. Each solar charger is equipped with a CN3791 power tracking battery charging circuit and comes preloaded with four 2-pin JST/PH2.0 connectors.
[Feature] Input voltage: Select the corresponding module according to the nominal voltage of the solar panel (6V 12V). Output voltage: Nominal 3.7V full stop voltage 4.2V Lithium battery Single series lithium battery charge management.
[Specification] Interface: 2pin PH2.0/JST. Charging current up to 2A. PWM switching frequency: 300KHz. Constant voltage charging voltage: 4.2V±1%. Working temperature: -40°C to +85°C.
[Function] Solar panel high power point tracking function. Complete charge management for a single lithium battery. Constant current charging current is set by external resistor. Trickle charge a deeply discharged battery. Automatic recharging function. Charging status and charging end status indication. Soft start function. Battery end overvoltage protection.

PAMEENCOS 2pcs GY-SHT31-D SHT31-D 3.3V Temperature and Humidity Sensor Module Breakout Digital Output IIC I2C Interface for Arduino

[SHT3X Sensor Technology] New temperature and humidity sensor series SHT3X takes sensor technology to the next level.
[Features] The SHT3X series includes a low-cost version SHT30, a standard version SHT31, an I2C interface and a wide operating voltage range (2.4-5.5V).
[Humidity] Humidity measurement range: 0~100%RH, humidity measurement accuracy: SHT30 ±3%RH; SHT31 ±2%RH; SHT35 ±1.5%RH.
[Temperature] Temperature measurement range: -40~125℃, temperature measurement accuracy: SHT30 SHT31 ±0.3℃ SHT35 ±0.2℃

PAMEENCOS 2 pcs ESP8266 ESP-07S Serial WiFi Module Industrial Grade Wireless Module

Wireless Standard:802.11 b/g/n, Frequency Range:2.4GHz-2.5GHz (2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Contorl, Operating Current:80mA (average)
Operating Voltage:GPIO/PWM 3.0-3.6V, Operating Temperature:-40°C to 125°C
Wireless Network Mode:station/softAP/SoftAP+station, Security Mechanism:WPA/WPA2, Encryption Type:WEP/TKIP/AES, Network Protocol:IPv4,TCP/UDP/HTTP/FTP
Size:17*16*3mm, Software Development:support custome server,provide SDK for customer secondary development

PAMEENCOS 5pcs GY-511 LSM303DLHC 3-axis Compass Acceleration Sensor Module, e-Compass 3 Axis Accelerometer, 3 Axis Magnetometer Module Sensor

[Description] Model: GY-511, Size: 14.5mm*20.5mm, Name: LSM303DLHC Module (Triaxial magnetic field + triaxial acceleration).
[Feature] Chip built-in 12bit AD converter,16 bit data output. Using high quality gold PCB, machine welding process to ensure quality.
[Specification] Chip used: LSM303DLHC. Power supply: 3-5v (internal low pressure difference regulator). Communication mode: Standard IIC communication protocol.
[Measurement] Magnetic field range: ±1.3 /± 1.9 /± 2.5 /± 4.0 /± 4.7 /±5.6 / ±8.1 gauss. Acceleration range: ±2 g/±4 g/±8 g.

PAMEENCOS 2 pcs CJMCU-3901 PMW3901 Optical Flow Sensor XY Translation Optical Flow Sensor for RC Drone Airplane Aircraft Flight Control

The PMW3901MB-TXQT is PixArt Imaging's latest optical navigation chip designed with far field optics technology that enables navigation in the air.It is housed in a 28-pin chip-on-board (COB)package that provides X-Y motion information with a wide working range of 80 mm to infinity.It is most suitable for far field application for motion detection.
Supply voltage: 1.8-3.6v. Operating range: 80mm to infinity
Interface: 2MHz 4-wire SPI1 6-bit motion data register< 9 mA Power @ Operating mode Internal oscillator - no clock input required Lens focus is not required during lens installation.
Application: Devices that require far-field motion detection, such as drones. Indoor and outdoor X-Y positioning, especially in GPS-rejected environments.
Download information: https://pan.baidu.com/s/1NK1-k6Pa9XlFUF8EOdD11Q, Code: nlj8.

PAMEENCOS 2 pcs ESP8266 ESP-07 Remote Serial Port WiFi Transceiver Wireless Module AP+STA-

ISM 2.4GHz, PA +25dBm, 802.11b/g/n
Warnings: This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant,Connect RX or TX on 5V Arduino will destroy this module.
Must use a logic level converter, or a 3.3V Arduino.The 3.3V supply on the Arduino Uno has inadequate current capabilit to power this module.
Must provide a separate,higher 3.3V supply(about 300mA or better)

PAMEENCOS 5pcs MCU1201 ADUM-1201 ADUM1201ARZ Magnetic Isolator Replacing Photocoupler

[Photocoupler Replacement] The ADUM1201 dual channel digital magnetic isolator replaces the photocoupler.
[Higher Speed and Lower Power] Higher speeds can reach 125Mbps.Lower power consumption less than the same data transmission rate of the traditional photoelectric isolator 1/10, small working current 0.8mA.
[Higher Integration and Performance] The performance is higher than traditional photoelectric isolators in timing accuracy, transient common mode suppression and channel matching. Smaller size and higher integration, the printed circuit board (PCB) area is 40% of the traditional photoelectric isolator.
[More Flexibility] More Flexible applications Unlike traditional optocouplers, the multi-channel iCoupler digital isolators provide forward and reverse communication channels within the same chip.

PAMEENCOS 5pcs CJMCU-1051 TJA1051 High-Speed Low-Power CAN Transceiver, TJA1051 High Speed, Low Power, CAN Transceiver TJA1051T, for Arduino

The TJA1051 is a high-speed CAN transceiver that acts as an interface between the CAN controller and the physical bus, providing differential transmit and receive functions for the CAN controller. The transceiver is designed for high-speed CAN applications in the automotive industry with transmission rates up to 1Mbit/s.
The TJA1051 is an upgraded version of the high-speed CAN transceiver TJA1050 with improved electromagnetic compatibility (EMC) and electrostatic discharge (ESD) performance, with the following features.
The transceiver is not visible on the bus when powered off or in low power mode.
The I/O ports of the TJA1051T/3 and TJA1051TK/3 can be directly connected to the 3V to 5V microcontroller interface.
These features make the TJA1051 a good choice for high-speed CAN network nodes, and the TJA1051 does not support busable wake-up standby mode.

PAMEENCOS 5 pcs Microwave Doppler Radar Motion Detector Sensor RCWL-0516 Module Board

Equipped with an RCWL-9196 chip based on the Doppler microwave induction technology
Has a maximum 7 meter (~21 feet) detection distance with adjustable delay time and sensitivity
The detector is not affected by its surroundings, and can operate through glass and other obstructions, providing better performance than traditional infrared (PIR) detectors.
Perfect for DIY microwave motion sensor light switch, security systems, human sensor toys, etc.

PAMEENCOS FAQs

Yes, PAMEENCOS is a legitmate brand on Amazon. After conducting a comprehensive analysis of 26 customer reviews for PAMEENCOS products on Amazon, we have determined its average rating. Offering great value and satisfying quality, PAMEENCOS has achieved a respectable rating of 4.11 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from PAMEENCOS on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in PAMEENCOS and want to find more PAMEENCOS products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type PAMEENCOS in the search box and hit Enter to see the search results.
  3. Find and click the correct PAMEENCOS to go to the new page.
  4. Select the products you want in the PAMEENCOS buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more PAMEENCOS products.

We analyze millions of PAMEENCOS products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 101 PAMEENCOS products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the PAMEENCOS page.
  2. Select the product you want in the PAMEENCOS buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product PAMEENCOS 1pcs MCU FT232H high-Speed Multi-Functio..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the PAMEENCOS products, helping you make more informed buying decisions. We recommend best choices of the products from the PAMEENCOS brand, helping you make better shopping choices with less time and energy.