Skip to content
AiTrip feature image

AiTrip

4.4 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, AiTrip has 233 products for sale. AiTrip products range in price from $5.99 to $29.99, and the average price of all the products is about $14.58. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase AiTrip products from the seller Aitrip. The brand holds an average rating of 4.4, testifying to its excellent reputation.

Share

AiTrip Best Sellers

Last Updated: Jan 10, 2026

AITRIP 2 Pack ESP32 Development Board ESP32-2432S028R WiFi Bluetooth 2.8 Inch 240X320 Smart Display TFT Module Touch Screen for Arduino

  • The display screen is controllable and can be used for APP remote control, remote environmental data collection and remote. Data , remote parameter setting and other batch development applications.
  • ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions
  • Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications

AITRIP 3PCS Type c 30pins CP2102 ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA

  • 3PCS Type c 30pins CP2102 ESP-WROOM-32 ESP32 ESP-32S Development Board ESP32 CP2012 USB C (Type-C) core board
  • 30 Pin ESP32 ESP-32D ESP-WROOM-32 CP2012 USB C WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
  • ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.

AiTrip EEPROM BIOS USB Programmer CH341A + SOIC8 Clip + 1.8V Adapter + SOIC8 Adapter for 24 25 Series Flash

  • Test Clip Pin format: SOIC8 SOP8 matrix ,Programmer TL866 EZP2010 RT809H CH341A
  • SOIC8 SOP8 Clip DIP8 for in-circuit programming For EEPROM /25CXX/24CXX on ZIP USB
  • Test Clip Beryllium copper plating needle, without welding, can be directly inserted

AITRIP 1 Pack ESP32 Development Board ESP32-2432S028R WiFi Bluetooth 2.8 Inch 240X320 Smart Display TFT Module Touch Screen for Arduino

  • The display screen is controllable and can be used for APP remote control, remote environmental data collection and remote. Data , remote parameter setting and other batch development applications.
  • ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions
  • Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications

AITRIP 1PCS Type-C ESP32 ESP-WROOM-32 Development Board WiFi + Bluetooth CP2102 Dual Core 2.4Ghz Microcontroller Compatible with Arduino (ESP32 30P, Type-C)

  • ESP32 CP2012 USB C (Type-C) core board, it has 30 pins
  • ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules
  • This board is used with 2.4GHz dual-mode WiFi and wireless chips using 40nm TSMC low-power technology.

AITRIP 3Sets USB C 38 Pin ESP32 ESP-32D ESP-WROOM-32 CP2012 WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module with ESP32 Breakout Board Shield Terminal Adapter

  • AITRIP ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
  • ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
  • The esp32 breakout board can expand one GPIO pin of esp32 development board to 2,ESP32 Breakout Board GPIO 1 into 2 for 38PIN No Mounting Hole Version ESP32 Development Board

AITRIP 2 Sets ESP-WROOM-32 ESP32 ESP-32S Type-C USB Development Board Type-C USB CH340C WiFi+Bluetooth Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board for Arduino

  • ESP32 is a safe, reliable, and scalable to a variety of applications
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
  • Integrated 520-kBSRAM, 448-kBROM16-kBSRAMinRTC

AITRIP 2 Sets ESP32-C3 MINI Development Board ESP32 Super Mini Development Board ESP32-C3 Development Board WiFi Bluetooth with Expansion Board for Arduino

  • If external power supply is required, just connect the + level of the external power supply to the position of 5V, GND connects to the negative terminal. (Support 3.3 ~ 6V power supply). Remember that when connecting the external power supply, you cannot access USB, USB and external power supply can only choose one.
  • Powerful CPU: ESP32-C3, 32-bit RISC-V single-core processor, running at up to 160 MHz; The ESP32-C3 is a 32-bit RISC-V CPU containing a FPU (Floating Point Unit) for 32-bit single-precision arithmetic with powerful computational capabilities.
  • AITRIP the ESP32C3SuperMini is positioned as a high-performance, low-power, cost-effective iot mini development board for low-power iot applications and wireless wearable applications.

AITRIP 3PCS PD65W Fast Charging Module Type-C USB Interface Supports PD3.1 QC3.0 SCP PPS Fast Charger 5V 9V 12V 20V

  • Output over-current, short-circuit protection Whole machine over-temperature protection
  • Output power: 65W max (5V3A, 9V3A, 12V3A, 20V3.25A, etc.); Designed to support PD3.1, QC3.0, SCP, and PPS fast charging protocols, ensuring compatibility with a wide range of devices.
  • Conversion efficiency: 92%~97%;The product features a Type-C interface, providing a universal connection for your devices

AITRIP 3 Sets 30PIN ESP32 ESP-32S Type-C USB CP2102 Development Board + ESP32 Breakout Board Shield GPIO 1 into 2 Board 2.4GHz WiFi Bluetooth Dual Core

  • 30PINS ESP32 Type C NodeMCU Development Board, ESP-WROOM-32, 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Integrated, CP2102 Chip
  • The ESP32 development board is used together with the 2.4 GHz dual-form Wi-Fi and Bluetooth chip. It uses 40 nm low power supply technology. Very low power consumption, works perfectly for Arduino IDE.
  • ESP32 is secure, reliable and scalable for a wide range of applications. The ESP32 development board NodeMCU Module Powerful, supports LWIP protocol, freeRTOS. ESP32 also integrates rich peripherals such as capacitive touch sensors, Hall sensors, SD card interfaces and Ethernet interfaces.

AITRIP 3PCS INMP441 Omnidirectional Microphone Module I2S Interface MEMS High Precision Low Power Ultra Small Volume with 20CM/7.8" 10pins Dupont Cable Female to Female for ESP32 DIY

  • The INMP441 is a high-performance, low power, digital-output, omnidirectional MEMS microphone with a bottom port.
  • The INMP441 is available in a thin 4.72 x 3.76 x 1 mm surface mount package. It is reflow- solder compatible with no sensitivity degradation. The INMP441 is halide free.
  • The INMP441 has a high signal-to-noise ratio and is an excellent choice for near field applications. The INMP441 has a flat wideband frequency response that results in high definition of natural sound.

AITRIP 10PCS 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger Compatible with Arduino Raspberry pi ARM AVR

  • he control DC or AC signal, you can control 220V AC load.
  • Supply Voltage: 5V Quiescent Current: 4mA Working Current: 65mA Trigger Voltage: 0-2V Trigger Current: 2mA
  • It can be not only used as a microcontroller development board module, but also as a home appliance control.

AiTrip 5pcs Digispark Kickstarter Attiny85 General Micro USB Development Board for Arduino

  • Support for the . IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (automatic selection).
  • On-board 500ma 5V Regulator.

AITRIP 1PCS ST-Link V2 Emulator Downloader Programmer STM32F103C8T6 STM8 STM32 with Cable (Random Color)

  • The interface easy to use simple horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring
  • Increased the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage
  • ST-Link V2 Stlink Mini STM8 STM32 STLINK Simulator Download Programmer Programming Supporting the full range of STM32 SWD debugging interface; Supporting the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported);Supporting for automatic firmware upgrades

AITRIP 3PCS DS3231 Real Time Clock Module RTC Sensor High Precision AT24C32 IIC Timer Alarm Clock for Arduino Raspberry Pi

  • Clock chip: high-precision clock chip DS3231SN; The DS3231 is an RTC IC developed by Maxim Integrated. It is a low cost, extremely accurate RTC IC with communication over I2C Interface. An interesting feature of DS3231 RTC IC is that it has integrated crystal oscillator and temperature sensor and hence you don't have to connect an external crystal.
  • It is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal.
  • AITRIP 3PCS DS3231 Real Time Clock Module RTC Sensor High Precision AT24C32 IIC Timer Alarm Clock for Arduino Raspberry Pi. Note: (Batteries are not included in the package. Please purchase the battery as shown in the picture locally)

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • [30VDC 250VAC Load] Equiped with high-current relay, AC250V 10A ; DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
  • [High Level Trigger] The relay module is triggered by high level signal, which can be input from microcontroller IO.
  • [ 3V/3.3V power relay module] - This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO.

AITRIP 10PCS WeMos D1 Mini V4.0.0 Type-C USB WiFi Internet of Things Board Based ESP8266 4MB Compatible with Arduino MicroPython Nodemcu

  • 10PCS D1 Mini V4.0.0 TYPE-C USB board
  • Type-C USB Port; I2C Port;For WEMOS D1 Mini V4.0.0 TYPE-C USB Internet Of Things Board Based ESP8266 4MB MicroPython Nodemcu for Arduino Compatible
  • the new board Add the I2C PORT

AITRIP 10PCS TP4057 1A Lithium Battery Charging Protection Board Module with Protection Type-C USB Charging Boards 3.7V 4.2V (TP4056 Upgraded)

  • TThe 3.7v lipo battery charger application: DIY lithium battery charging; Small electrical appliance magic;Installing a charging port on a tablet computer;Suitable for various types of 3.7V lithium batteries, including 18650 and composite batteries.
  • TP4057 1A Lithium Battery Charging Board with Protection;Type-C USB C Li-ion Battery Charging Board
  • Dual output of charging status, no battery and fault status display

AITRIP 2PCS Type-C USB-C PD2.0 3.0 to DC USB Decoy Fast Charge Trigger Poll Detector 100W MA (ZY12PDN Bare Board)

  • Maximum power support to 100W, excellent compatibility.
  • Current: 0-5A
  • Voltage: 3-20V

AITRIP 5PCS 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (White)

  • 5PCS 0.96 Inch OLED Display Screen Module Compact Self-Luminous Mini Screens for Arduino Projects-White
  • Compatibility: AITRIP This OLED display is compatible with a wide range of platforms including Arduino/Mega, Raspberry Pi, 51 MCU, STM32, and ESP32
  • 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W; Self-Luminous: Each pixel emits light independently for superior contrast and efficiency.

AiTrip FAQs