MBS Mfg

4.6 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, MBS Mfg has 174 products for sale. MBS Mfg products range in price from $16.98 to $178.98, and the average price of all the products is about $89.28.

We found that most of the MBS Mfg products are manufactured by MBS Manufacturing Inc, Mbs Manufacturing Inc, and MBS Manufacturing inc. The manufacturers provide MBS Mfg with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase MBS Mfg products from the seller MBS Manufacturing Inc. The brand holds an average rating of 4.6, testifying to its excellent reputation.

MBS Mfg Best Sellers

Last Updated: Jan 12, 2025

Inner Cam Bearing Installer & Puller Tool Set for Harley Davidson Twin Cam TC96 103 110 & Dyna, Cam Bearing Removal Installation Tool for Dyna Harleys

Bearing Pullers

Buy on Amazon Find on eBay

Set of Inner Cam Bearing Puller and Installation Tools. Compatible with all Harley Davidson TC96, 103,110 that use the B168 bearings.

This set is specifically designed to remove and install the inner cam bearings on newer model Twin Cams and Dyna Harleys. We also have new Koyo (former Torrington) B-168 bearings.

This set includes 1 inch collet. The design of our collet is improved. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet to allow for a more controlled grip and protection of threads.

This set comes with our "T" pin for easier insertion and removal from the collet! We have completely reworked how the process of pulling and installing the bearings works - we've made it easier, faster, and better. Instead of using a sleeve, nut, and washer with the collet to pull the bearings, the collet is threaded through the plate, and is inserted into the bearing. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions.

This Set of Inner Cam Bearing Puller and Installation Tools is professionally made in the United States on the state of the art CNC equipment with 100% quality inspection. Tools come with Black Oxide Coating for Years of Use

The package include: Plate, 1 inch collet, 1 inch driver, “T” pin and 4 screws.

Read more Read less

Transmission Mainshaft Inner Bearing Race Tool Installer Puller Set # 34902-84 for Harley Davidson Big Twin 5 & 6 Speed, Removal Installation Tool Kit

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for a Transmission Mainshaft Bearing Inner Race Puller and Installation Tool Set designed for Harley Davidson.

Application: This tool compatible with all Harley Davidson 1984 to Present (except 2006 Dyna) Five (5) and Six (6) Speed Transmission Big Twins.

It replaces OEM Tool # 34902-84.

Function: Designed to remove and install the mainshaft inner bearing race on 5 and 6 speed transmissions.

Material: Made of 1045 cold rolled steel, which is sturdy and durable. This tools kit is professionally made in the United States on the state of the art CNC equipment with 100% quality inspection. Tool comes with black oxide finish preventing corrosion to assure many years of service.

We offer combined shipping services. All our tools are made from high quality materials and are designed for long life durability and ease of use.

Package Includes: 1x Transmission Mainshaft Bearing Inner Race Puller and Installer Tool Set ( as the picture shows).

Read more Read less

Primary Drive Locking Bar Tool Set, Chain Lock Tool for Harley Davidson 5 Speed Big Twins FXR, FLT, 4 Speed Big Twins, Dyna Glide 5 Speed FXST Softail

Powersports Tool Sets

Buy on Amazon Find on eBay

Full Set (4 piece) Of Primary Drive Locking Bar Tools 7.6 inch /8.5 inch /7.125 inch/ 5.95 Inch compatible with Harley Davidson.

7.6” Primary Drive Locking Bar Tool compatible with Harley Davidson 5 Speed Big Twins labeled FXR & FLT.

7.125” Primary Drive Locking Bar Tool designed for Harley Davidson 2006 to Present Dyna and 2007 To Present Softails.

8.50" Primary Drive Locking Bar Tool compatible with Harley Davidson 4 Speed Big Twins, Dyna Glide, and 5 Speed FXST Models.

5.950" Primary Drive Locking Bar Tool is for Late 6 Speed Models Harleys.

Functions: These tools are designed to keep the primary drive sprockets from rotation during the installation and removal process. The tool is easy inserted into the primary drive sprockets to restrict the movement. Allows engine and clutch nuts to be easily removed and retorqued for primary service work.

Materials: Tools made of 1018 Cold Rolled Steel and come with Black Oxide Coating for Years of Use. This Set is professionally made in the United States on the state of the art CNC equipment with 100% quality inspection.

We offer combined shipping services.

Read more Read less

Compatible for Harley Davidson TC 88 96 103 110 Twin Cam & Dyna Inner Cam Bearing Installer & Puller

Powersports Tool Sets

Buy on Amazon Find on eBay

Compatible with all Harley Davidson TC88,96,103 and 110s that use the b148 or the b168 bearings.

This set will remove and install the inner cam bearings on both newer and older model Twin Cams and Dyna Harleys.

We also have new Torrington- Koyo B-148 and B-168 bearings.

This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet to allow for a more controlled grip and protection of threads.

We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine.

This set comes with our "T" pin for easier insertion and removal from the collet! Instructions are available for this set!

Tool is made from high quality tool steel proudly manufactured and assembled in the United States.

Tool comes with black oxide finish preventing corrosion to assure many years of service.

Read more Read less

MBS Mfg Compatible for Harley Davidson TC 88 96 103 110 All Twin Cam & Dyna Inner Cam Bearing Installer & Puller

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for Inner Cam Bearing Puller and Installation Tools Set. Designed for Harley Davidson Twin Cam and Dyna models. Compatible with all TC88, 96, 103 and 110s that use the B148 or the B168 bearings.

Function: This set is specifically designed for removing and installing the inner cam bearings. This set will remove and install the inner cam bearings on both newer and older model Twin Cams and Dyna Harleys. We also have new Koyo (former Torrington) B-148 and B-168 bearings available in our store!

Features: This inner bearing Puller and Installation tool set is made of high-quality steel, which is sturdy and durable. Tool Comes with Black Oxide Coating for Years of Use. This tool is professionally made in the USA on the state of the art CNC equipment with 100% quality inspection.

Improvement: We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set also includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light!

Package includes: 1 x Inner Cam Bearing Puller and Installation Tools Set (as picture shown).

Read more Read less

Motorcycle 6 Speed Primary Drive Locking Bar Tool 5.625 for Harley Primary Locking Tool Chain Lock Tool for Harley Davidson 07- Present FLHR FLHX FLHT

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for a Primary Drive Locking Bar Tool. The Tool is 5.625 inch Long. Compatible with Harley Davidson 07-Present 6 Speed FLHR, FLHX, FLHT, FLTR models.

Functions: This tool is designed to keep the primary drive sprockets from rotation during the installation and removal process. The tool is easy inserted into the primary drive sprockets to restrict the movement. Allows engine and clutch nuts to be easily removed and retorqued for primary service work.

Material: Tool made of 1018 Cold Rolled Steel and comes with Black Oxide Coating for Years of Use.

This Primary Drive Locking Bar Tool professionally made in the United States on the state of the art CNC equipment with 100% quality inspection.

We offer combined shipping services. All our tools are made from high quality materials and are designed for long life durability and ease of use.

Read more Read less

Primary Drive Locking Bar Tool Set Chain Lock for Harley Davidson 5 Speed Big Twins FLHR, FLHX, FLHT, FLTR, Dyna Glide, FXST Softail 6 Speed Twin Cams

Powersports Tool Sets

Buy on Amazon Find on eBay

Full Set (5 piece) Of Primary Drive Locking Bar Tools 7.6 inch /8.5 inch /7.125 inch/ 5.95 inch/ 5.625 Inch compatible with Harley Davidson.

7.6” Primary Drive Locking Bar Tool compatible with Harley Davidson 5 Speed Big Twins labeled FXR & FLT.

7.125" Long Primary Drive Locking Bar Tool Compatible with Harley Davidson 2006 to Present Dyna and 2007 To Present Softails.

8.50" Primary Drive Locking Bar Tool compatible with Harley Davidson 4 Speed Big Twins, Dyna Glide, and 5 Speed FXST Models.

5.950" Primary Drive Locking Bar Tool is for Late 6 Speed Models Harleys.

5.625 Long Primary Locking Bar Tool Compatible with Harley Davidson 07-Present 6 Speed FLHR, FLHX, FLHT, FLTR models.

We offer combined shipping services.

Read more Read less

Twin Cam Inner Bearing Installer and Puller Tool Kit for Harley Davidson Twin Cam TC88 and Dyna Models Inner Bearing Removal and Installation Tool Kit

Bearing Pullers

Buy on Amazon Find on eBay

Set of inner cam bearing puller and installation tools.This set includes 0.875 " collet and 0.875" Driver.

Compatible with Harley Davidson Twin Cam and Dyna models. Fit for all TC88s that use the b148 bearings. We also have new Koyo B-138, B-148 and B-168 bearings available in our store!

This set will remove and install the inner cam bearings on older model Twin Cams and Dyna Harleys.

This set includes 0.875 " collet. The design of our collet is improved. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet to allow for a more controlled grip and protection of threads..

We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine.

This set comes with our "T" pin for easier insertion and removal from the collet! Instructions are available for this set!

Tool is made from high quality tool steel proudly manufactured and assembled in the United States.

Tool comes with black oxide finish preventing corrosion to assure many years of service.

Read more Read less

2 Piece Aluminum Lifter Magnet Tool Magnetic Holders for Harley Davidson Twin Cam and Dyna Models 1999-Present, Tappet Lifter Magnet Holders Tools Set

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for TWO (2 pieces) Lifter Magnet Holders.

Application: compatible with Harley Davidson Twin Cam and Dyna models 1999 to Present.

Function: When working on a rebuild, the lifters drop into the cam lobes, getting in the way of removing and installing new bearings and cams. This set will allow you to work on both, front and rear lifters at the same time (if purchasing two (2)!

Material: Manufactured from 6061-T6 aluminum. Aluminum Body with Strong Magnets Press Fitted to Last.

Package includes: TWO Lifter Magnet Holders (as shown on thw picture).

These tools are professionally made in the United States on the state of the art CNC equipment with 100% quality inspection.

We offer combined shipping services.

Read more Read less

MBS Mfg Engine Alignment Tool for Mercruiser Gimbal Bearing Alignment and Install Kit Grease Seal and Bellow Retainer Ring Install Tool for Alpha 1 Gen 2 Bravo and Blackhawk OMC Cobra

Powersports Tool Sets

Buy on Amazon Find on eBay

This is a set of Four (4) Tools: Engine Alignment Tool; Drive Shaft Bellow Sleeve Installation Tool ( PVC Plastic) ; Gimbal Bearing Installation Tool; Grease Seal Installation Tool;

Engine Alignment Bar Tool compatible with MerCruiser Sterndrives including: Pre-Alpha "R", Alpha One "MR", Generation II, all Bravo models. This Tool is similar to MerCruiser P/N 91-805475A1 which used to be P/N 91-57797A3. Compatible with Volvo SX P/N 3851083 and OMC Cobra P/N 18-4442. The length of the bar is approximately 23-5/8 inch.Tool is made from high quality 1045 Steel. Alignment Tool Comes Without Black Oxide Coating. This Tool will correctly align all OMC Cobra and Mercruiser Outdrives with the exception of the Mercruiser TR and TRS Outdrive Models.

Gimbal Bearing Installation Tool. This tool Compatible with OMC Cobras, Bravos, #1 Drives made from 1966 to Current makes, including the Pre Alpha(R), Alpha 1 MR. and Generation 2. Tool Comes With Black Oxide Coating.

Grease Seal Installation Tool. Used on all Mercruiser #1 Drives, Pre Alpha (R), Alpha One (MR), Generation 2, All Bravos, and OMC Cobras.

The Bellow Ring/ Retainer Sleeve Installation Tool made from PVC Plastic. Drive Shaft Bellow Sleeve Installation Tool Helps install the aluminum ring. Compatible for Alpha 1 Generation 2, Bravo, Blackhawk U-Joints Bellows.

Our Tools Are: 100% Made in the United States.

Read more Read less

MBS Mfg Compatible for Harley Big Twin Transmission Mainshaft Bearing Inner Race Puller Tool 34902-84

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for a Transmission Mainshaft Bearing Inner Race Puller Set. Part Number # 34902‑84.

Application: This tool compatible with all Harley Davidson 1984 to Present (except 2006 Dyna) Five (5) and Six (6) Speed Transmission Big Twins.

Function: Designed to remove the mainshaft inner bearing race on Five (5) and Six (6) Speed Transmission without damage.

OE Number Reference: This Mainshaft Bearing Inner Puller replaces OEM number # 34902-84.

Package Includes: 1 X Transmission Mainshaft Bearing Inner Race Puller Tool Set (as picture shows)

We offer combined shipping services. All our tools are made from high quality materials and are designed for long life durability and ease of use.

Read more Read less

3 Oil Pump Tappet Lifter Block Guide Alignment Tool Set for Harley Davidson Big Twins, Twin Cam Engines 1999-Present, Tappet Block Alignment Set 33443

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for THREE Tools. Use these tools to perfectly align the tappet blocks and the lifters with the camshaft. These tools will fit Harley Davidson Big Twins from 1977 to 1990. The threads on the tool are 1/4 inch - 20TPI They can also be used to center the oil pump on the Twin Cam Engines from 1999 to Present.

x x Tool Comes with Black Oxide Coating For Years of Use x x x

100 percent Made in the United States.

YES, We Ship Internationally! WE COMBINE ORDERS FOR SHIPPING!

Fit type: Vehicle Specific

5.95 Inch Primary Drive Locking Bar Tool for Harley Davidson Late 6 Speed TC96 Twin Cams, Sprocket Nut Lock Tool Motorcycle Chain Locking Special Tool

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for a New Primary Drive Locking Bar Tool 5.95”.

The tool length is 5.95 inches.

Compatible with Harley Davidson Late 6 Speed Models (TC96) Twin Cams.

Functions: This Primary Drive Locking Bar Tool is specially designed to keep the primary drive sprockets from rotation during the installation and removal process. The tool is easy inserted into the primary drive sprockets to restrict the movement. Allows engine and clutch nuts to be easily removed and retorqued for primary service work.

Material: Tool made of 1018 Cold Rolled Steel, which is sturdy and durable. Tool comes with black oxide finish preventing corrosion to assure many years of service. This Primary Drive Locking Bar Tool professionally made in the United States on the state of the art CNC equipment with 100% quality inspection.

The package includes: 1 x Primary Drive Locking Bar Tool (as shown on the picture). We offer combined shipping services.

We offer combined shipping services. All our tools are made from high quality materials and are designed for long life durability and ease of use.

Read more Read less

Motorcycle Camshaft Bearing Remover and Installer Tool Set for Harley Davidson Twin Cam 1999- 2006, Camshaft Replace Removal and Installation Tool Kit

Powersports Tool Sets

Buy on Amazon Find on eBay

Camshaft Removal and Installation Tool Set.

Compatible with Harley Davidson Twin Cam (TC88) Models up to 2006.

Will NOT fit 2006 Dyna Models.

This set will remove and install the front and read camshafts and bearings in the Twin Cam Support Plate.

We've redesigned this tool to save on weight. The support block (Red/Black piece), is made from Aluminum, which is anodized red. The inserts are black oxide and are made from steel. The steel inserts are press fit into the aluminum, for a gorgeous look. This saved half the weight of the whole set, opening up options of shipping this item for a better price internationally, as well as making it more affordable overall to combine with other items.

Camshaft Removal and Installation Set professionally made in the United States on the state of the art CNC equipment with 100% quality inspection.

Package includes: 1 x Camshaft Remover and Installer (as shown on the picture).

We offer combined shipping services. All our tools are made from high quality materials and are designed for long life durability and ease of use.

Read more Read less

MBS Mfg Compatible for Boat Alpha, Bravo, Omc Gimbal Bearing Puller/Remover

Bearing Pullers

Buy on Amazon Find on eBay

BRAND NEW TOOL: This listing is for a new Gimbal Bearing Puller / Remover Tool.

APPLICATION: This Gimbal Bearing Puller Tool compatible with Mercruisers, OMC, fit for Volvo, Cobra Bell Housings motor. Works on Mercruiser Alpha, Alpha 1, MR, Bravo, OMC Cobra, fit for Volvo.

FUNCTION: This tool allows easy and quick removal of the Gimbal bearing. The Gimbal Bearing Puller is easy to use. This blind hole puller locks into the inner race of the bearing. Just turn the end of the tool with a wrench to pull the bearing out. Comes with directions on how to use the tool.

MATERIAL: Made of 1045 cold rolled steel, which is sturdy and durable. Puller Bearing tool comes with black oxide finish preventing corrosion to assure many years of service.

100% MADE IN USA: This Gimbal Bearing Puller Tool is professionally made in the USA on the state of the art CNC equipment with 100% quality inspection.

Package includes 1 x Gimbal Bearing Puller / Remover Tool.

Read more Read less

Outdrive Coupler Alignment Bar, Engine Alignment Tool, Alignment Tool for MerCruiser 91-805475A1, Mercury, Alpha 1 Gen 2, Bravo, SX, OMC Cobra 18-4442

Buy on Amazon Find on eBay

New Engine Alignment Tool that can be used on most stern drives to align the drive to the engine during installation.

APPLICATION: Engine Alignment Tool compatible with MerCruiser Sterndrives including Pre Alpha, Alpha 1 Gen 2, MR, R, all MerCruiser Bravo. Compatible with Volvo SX and OMC Cobra Drives. New Engine Alignment Tool that can be used on most sterndrive to align the drive to the engine during installation. This Tool will correctly align all OMC Cobra and Mercruiser Outdrives with the exception of the Mercruiser TR and TRS Outdrive Models.

INTERCHANGE PART NUMBERS: Compatible with MerCruiser OEM P/N 91-805475A1 & 91-57797A3. Compatible with Volvo SX P/N 3851083. Compatible with OMC Cobra P/N 18-4442.

NOTE: This Tool will correctly align all OMC Cobra and Mercruiser Outdrives with the exception of the Mercruiser TR and TRS Outdrive Models.

MATERIAL: Tool is made from high quality 1045 Steel. The length of the bar is approximately 23-5/8 inch. Alignment Tool Comes Without Black Oxide Coating.

TOOL SPECIFICATIONS: According to MerCruiser service bulletin No 92-9, the alignment tool must have the following sizes from front to back: 1.010" diameter, 2.200" long (section that fits into coupler), 1.150" diameter. 2.750" long, and 1.375" diameter rest of the bar (section that fits gimbal bearing inside diameter). We test all of our tools for this fit at the shop, using precision gauges and measuring tools.

MADE IN USA: This marine tool is professionally made in the United States on the state of the art CNC equipment with 100% quality inspection.

Read more Read less

Inner Cam Bearing Puller & Installer Tool Set, Koyo B-138 Needle Roller Bearing Removal Install Tools Kit for Harley Davidson Single Cam EVO Evolution

Powersports Tool Sets

Buy on Amazon Find on eBay

Set of Inner Cam Bearing Puller Installation Tools One New Koyo B-138 Bearing.

Compatible with Harley Davidson 1986 to Present Single Cam EVO Evolution that use the B138 bearings.

Function: This set is specifically designed for removing and installing the inner cam bearings on the newer model Single Cam EVO Harleys.

The Set includes a 0.812-inch Driver with Internal Thread. This Driver threads onto the bolt and is used to install the inner cam bearing B-138. We also have new Torrington-Koyo B-138 bearings available in our store!

This kit contains a High Strength Steel Hex Head Bolt Grade 8. This screw is at least 25 % stronger than medium-strength steel screws. Zinc yellow- chromate plated steel screws resist corrosion in wet environments.

Material: This inner bearing Installation tool set is made of high-quality 1045 cold rolled steel, which is sturdy and durable. Tool Comes with Black Oxide Coating for Years of Use. This tool is professionally made in the USA on the state of the art CNC equipment with 100% quality inspection.

Package Includes: One set of inner cam bearing installer & puller tools and One New Koyo B-138 Bearing (as shown on picture).

We offer combined shipping services. All our tools are made from high quality materials and are designed for long life durability and ease of use.

Read more Read less

MBS Mfg B138 Inner Cam Bearing 1 pcs Compatible for Harley Single Cam EVO, Former Torrington Timken Koyo

Engine Cam Bearings

Buy on Amazon Find on eBay

This listing is for B-138 Koyo Full Complement Needle Roller Bearing 13/16 x 1-1/16 x 1/2.

Manufactured by KOYO (former Torrington).

Dimensions of the Needle Roller Bearings B-138 are Inner Diameter is 20.64 mm (0.8125"). Outer Diameter is 26.99 mm (1.0625"). Width (B) is 12.70 mm (0.5").

The Needle Roller Bearing offered is the B-138, which is suitable for Harley Davidson Evolution Single Cam models from 1958 to 1999. This is the only cam bearing you should use for your Single Cam.

These bearings are designed to handle high loads and operate at high rotational speeds, making it an excellent choice for transferring radial loads in confined spaces. Made from premium bearing steel.

Package includes: 1 x B-138 Koyo Full Complement Needle Roller Bearing.

This bearing is professionally made in the USA by KOYO. Koyo bought the Torrington needle bearing division from Timken in 2011, which acquired Torrington in 2003.

We offer combined shipping services.

Read more Read less

1 7/8" Main Shaft Pulley Socket Tool, Mainshaft Sprocket Wrench Lock Nut Socket Removal Tool for Harley-Davidson Big Twins Engine 1936-2006 & Twin Cam

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for a Main shaft sprocket wrench tool for the 1 7/8" nuts with a threaded bushing.

Compatible with Harley Davidson 1936-2006 Big Twin. Compatible with Harley Davidson 1999-2006 Twin Cam.

Does not fit for 2006 Dyna.

Function: this tool is designed to remove and install the 1 7/8'' nut locking the transmission pulley in position and makes changing belts pulleys or sprockets easily and quickly.

The tool is 5.5 inch deep with a Threaded Bushing and can be used with a 1/2" drive ratchet or breaker bar. The Back of The Tool Has a 1/2" Drive.

Tool is made from high quality tool steel proudly manufactured and assembled in the United States on the state of the art CNC equipment with 100% quality inspection. Tool Comes with Black Oxide Coating for Years of Use.

Package includes: 1 x Main shaft sprocket wrench tool and 1 x Threaded Bushing (as shown on the picture).

We offer combined shipping services. All tools are made from high quality materials and are designed for long life durability and ease of use.

Read more Read less

New Camshaft Chain Tensioner Unloader Tool #42313, Twin Cam Chain Tensioner Unloader, Camshaft Tool for Harley Davidson TC88 1999-2006 Twin Cam Models

Powersports Tool Sets

Buy on Amazon Find on eBay

This listing is for a new Camshaft Chain Tensioner Unloader Tool. Replaces part # 42313

Compatible with Harley Davidson 1999 to 2006 Twin Cam Models. Will NOT Fit 2006 Dyna.

Function: The tool will unload the pressure from the primary and secondary chain tensioners to assist with the assembly and disassembly of the camshafts.

Material: made of high-quality steel, which is sturdy and durable. Tool comes with black oxide finish preventing corrosion to assure many years of service.

This Tool is professionally made in the USA on the state of the art CNC equipment with 100% quality inspection. A must have tool for anyone working on charging or ignition systems.

The package includes: 1 x Camshaft Chain Tensioner Unloader Tool (as shown on the picture).

We offer combined shipping services. All our tools are made from high quality materials and are designed for long life durability and ease of use.

Read more Read less

MBS Mfg FAQs

Is MBS Mfg Legit?

Yes, MBS Mfg is a legitmate brand on Amazon. After conducting a comprehensive analysis of 1,399 customer reviews for MBS Mfg products on Amazon, we have determined its average rating. With a strong performance and good quality, MBS Mfg has received an average rating of 4.6 from numerous buyers, indicating that MBS Mfg are trustworthy and live up to their claims. Therefore, it is safe to make purchases from MBS Mfg on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more MBS Mfg products?

If you're interested in MBS Mfg and want to find more MBS Mfg products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type MBS Mfg in the search box and hit Enter to see the search results.
Find and click the correct MBS Mfg to go to the new page.
Select the products you want in the MBS Mfg buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more MBS Mfg products.

How does findthisbest choose the top MBS Mfg products?

We analyze millions of MBS Mfg products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase MBS Mfg products via FindThisBest?

Go to the MBS Mfg page.
Select the product you want in the MBS Mfg buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Inner Cam Bearing Installer & Puller Tool Set for..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the MBS Mfg products?

Most of the MBS Mfg products are produced by MBS Manufacturing Inc, Mbs Manufacturing Inc, and MBS Manufacturing inc. The manufacturers provide MBS Mfg with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the MBS Mfg products, helping you make more informed buying decisions. We recommend best choices of the products from the MBS Mfg brand, helping you make better shopping choices with less time and energy.

Similar Brands

OriGlam

Powerbuilt

Oxford

Assault Racing Products