EVIL ENERGY

4.6 Fact checked

Buy on Amazon ievilenergy.com

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, EVIL ENERGY has 306 products for sale. EVIL ENERGY products range in price from $12.99 to $96.99, and the average price of all the products is about $43.

We found that most of the EVIL ENERGY products are manufactured by Speedwow Tuning and Speedwow. The manufacturers provide EVIL ENERGY with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase EVIL ENERGY products from the seller EVIL ENERGY. The brand holds an average rating of 4.6, testifying to its excellent reputation.

EVIL ENERGY Best Sellers

Last Updated: Jan 9, 2026

EVIL ENERGY 6AN Fuel Line Kit, 6AN Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black

Car Hoses Car Fuel Hoses

Buy on Amazon Find on eBay

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.

6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

Maximum Working Pressure: 750psi. Bursting Pressure: 2250psi. Temperature Range: -22°F to 248°F.

Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.31". Hose OD: 0.56inch.

The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.

Read more Read less

EVIL ENERGY Oil Catch Can, Universal Baffled Catch Can Kit with Breather Filter, 300ml Aluminum Air Oil Separator Tank NBR Fuel Hose Kits for PCV System

Fuel & Water Separators

Buy on Amazon Find on eBay

[Universal]It can be applied to most cars, making sure there's enough room for Installation.

[Size] Hose length: 2.6ft / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML.

[Breather Filter] You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can, all for your option.

[Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose.

Oil Catch Can with or without Breather Filter: Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.

[After-sales Service] We stand by the quality of our oil catch can. If there's a quality issue, we'll take care of a return or exchange—no hassle. Have questions or need help? Our customer service team is here to provide fast, professional support whenever you need it

Read more Read less

EVIL ENERGY AN Fitting Hose Wrench Adjustable 3AN-16AN Aluminum Black

Adjustable Wrenches

Buy on Amazon Find on eBay

[Adjustable range] This wrench size can be adjusted to 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 14AN and 16AN.

[Material] It's made of lightweight 6061-T6 aluminum . Recommended for aluminum fitting, easy to damage for other materials. Advice:wrap the wrench's jaws with electircal tape to better protect the fitting &wrench.

[Advantage] Multisize in one /Contact of four opposite sides.

[Size] length: 7.2 inch/18.5 cm,width: 2.7 inch/7.1 cm,thickness:0.52 inch/1.35cm.

[Design] Featuring a curved design with a non-slip handle for a comfortable grip and fit for hand movement.

EVIL ENERGY 6AN PTFE Fuel Line Kit,E85 Nylon Braided Fuel Hose 20FT AN6 PTFE Fuel Line Hose(5/16 Inch ID)

Car Hoses Car Fuel Hoses

Buy on Amazon Find on eBay

Size: PTFE 6an fuel hose ID: 5/16" (0.31 inch). OD: 0.45 inch. Length: 20 ft(6 m). Please measure before purchase! (Includes: as shown in the picture)

Parameter: PTFE Line Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 1,500 PSI. Bursting pressure: 4,500 PSI.

Applicable Medium: Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.

Suitable for Wide Usage: The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.

Notice: The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended.

EVIL ENERGY Inline Fuel Filter 10 Micron with 6AN 8AN 10AN Adapter&Bracket Clamp 50MM Universal

Fuel Filters

Buy on Amazon Find on eBay

[Application] Universal fuel filter, includes an6, an8, an10 adapters for different size applications. With mounting bracket keeps the engine bar stylish and clean.

[Material] Aluminum alloy fuel filter can and stainless steel filter element.

[O-ring] The o-ring provides a tight seal for fittings and end caps.

[Function] Can be used for filtering gasoline, diesel, etc.(Not E85) Captures contaminant particles of 10 micron and above to protect the fuel system of the vehicle.

[Feature] Removable design, easy to clean or replace filter element at regular time.

[Installation Tips] We have debugged the installation direction of the fuel filters before delivery. Please check and ensure the closed end of the filter element docks with the spring. Let the liquid flow following the arrow from the spring end to the other end, and the fuel filter will serve longer.

Read more Read less

EVIL ENERGY 6AN Hose Separator Clamp, AN6 Fuel Line Mounting Clamp Aluminum Black 4PCS

Car Hoses Clamps & Sleeving Hoses

Buy on Amazon Find on eBay

Size: The inner hole diameter is 0.51 inch (12.9 mm), which is suitable for clamping and mounting 6AN fuel lines.

Material: The clamp is made of 6061-T6 aluminum alloy.

Function: It is used to secure and separate transmission lines, helping to keep your project clean and organized.

Application: The fuel hose separator clamp is widely used for fuel hoses, oil lines, brake lines, gas lines, water pipes, and more.

Note: Five sizes of hose mounting clamps are available. Please measure the OD of your hose before purchasing.

EVIL ENERGY 3/8" High Pressure Fuel Line Hose 10FT 500PSI E85 for Fuel Systems Engines NBR Rubber EN854-1TE Red

Car Hoses Car Fuel Hoses

Buy on Amazon Find on eBay

[Parameter] Working Pressure: 500psi; Burst Pressure: 1720psi; Temperature Range: -40°F to 212°F; Minimum Bend Radius: 80mm

[Specifications] ID: 3/8 inch (9.5mm); OD: 0.63 inch (16.2mm); Length: 10 feet.

[Material]The E85 fuel line is made of double-layer NBR and reinforced with a polyester fiber braid, oil and wear resistance.

[Medium] The high pressure fuel hose is compatible with diesel, biodiesel, gasoline, oil, grease, E85, hydraulic oil etc.

[Application] Implementation standards: EN854. The 3/8 push lock fuel hose is widely used in fuel systems engines, engine lubrication system,hydraulic system,oil pump inlet system,engine oil filtration system,etc.

EVIL ENERGY Oil Catch Can, Universal Baffled Catch Can Kit with NBR Fuel Hose, 300ml Aluminum Air Oil Separator Tank for PCV System

Fuel & Water Separators

Buy on Amazon Find on eBay

[Baffled Design] Featuring a removable baffle and adding an appropriate amount of steel wool, this oil catch can effectively traps oil and moisture, preventing carbon buildup

[Universal Fit] With a 300ml capacity, this catch can is compatible with most vehicles. Please ensure there is sufficient space for installation

[Durable NBR Fuel Hose Kit] Includes a high-quality NBR hose known for its exceptional wear and heat resistance. Hose length: 2.6ft (0.8m); ID: 3/8"; OD: 2/3". The inlet and outlet ports feature an M16*1.5 thread for a secure fit

[PCV System Compatibility] Oil Catch Can with or without Breather Filter? Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can

[Note] In freezing temperatures, the crank vent system generates increased moisture, which may lead to freezing risks. To prevent blockages, clean the catch can weekly or reinstall the original PCV hose in cold weather conditions

Read more Read less

EVIL ENERGY Coolant Overflow Tank, Aluminum Radiator Tank, Reservoir Expansion Tank Universal 1L Black

Engine Coolant Recovery Kits

Buy on Amazon Find on eBay

[Size] The Male to barb fitting thread size is M14*1.5.can work with 3/8" ID fuel hose.Overflow tank storage volume1L.

[Fitment]Universal coolant reservoir tank, fit for mostly of vehicles.Please measure before purchase to make sure there is enough space for installation.

[Note]Tight closed cap, fully TIG welded and thread come with O-ring gasket, let coolant reservoir can keep a good closed environment and prevent coolant leakage.It is high recommended use Tetflon tape when install, it can enhance airtightness prevent interface leakage.

[Function]When the coolant pressure in the radiator exceeds the pressure cap setting, the coolant is sealed through the pressure cap and flows through the overflow tube into the radiator coolant overflow tank.Bottom port is radiator overflow,the top port is the tank overflow.

[Installation] Barb fittings and bottom drain plugs are supplied with O-rings to ensure a good seal and Teflon tape is recommended for installation.

Read more Read less

EVIL ENERGY 6AN Male Flare to 3/8" NPT Pipe Fitting Adapter Aluminum Straight Black 2PCS

Fuel System Fittings

Buy on Amazon Find on eBay

Size: The fitting is an AN6 to 3/8" NPT adapter, and the thread size of the 6AN is 9/16-18 UNF

Material: The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.

Sealing: The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.

Application: The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.

Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended.

EVIL ENERGY 6AN PTFE Fuel Line Kit,E85 Nylon Braided Fuel Hose 20FT PTFE LS Swap EFI Fuel Line Fitting Kit AN6

Car Hoses Car Fuel Hoses

Buy on Amazon Find on eBay

Size: PTFE 6an fuel line ID: 5/16" (0.31 inch). OD: 0.45 inch. Length: 20 ft(6 m). Please measure before purchase! (Includes: as shown in the picture)

Parameter: PTFE fuel line hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 1,500 PSI. Bursting pressure: 4,500 PSI.

Applicable Medium: EVIL fuel line kits are suit for all automotive fuels, lubricants, and coolants.

Suitable for Wide Usage: The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.

Notice: The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended.

EVIL ENERGY 6AN Male to 3/8" & 5/16" Quick-Disconnect Female EFI Fuel Rail Fitting Aluminum

Fuel System Fittings

Buy on Amazon Find on eBay

[Size] The thread size of 6an is 9/16-18UNF. The ID of the screw is 3/8 inch and 5/16 inch.

[Seal] The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.

[Parameter] Working pressure: 1500psi; Temperature range: -40°F-250°F.

[Material] Made of aluminum alloy 6061-T6. Spring lock is made of plastic.

[Application] Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc.

EVIL ENERGY 6AN Hose End Fitting Straight Swivel for CPE Braided Hose Black 4PCS

Hose Fittings & Adapters Car Hoses

Buy on Amazon Find on eBay

Size: The thread size of the 6AN fitting is 9/16-18 UNF. The AN side is sealed by a 37 degree angle

Application: The swivel fitting works only with stainless steel braided and nylon braided hoses

Material: The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy

Parameter: Maximum working pressure: 1,500 PSI. Working temperature range: -65℉ to 252℉(-53℃ to 122℃)

Feature: The 6AN 90-degree fitting features a 360° swivel design for easy assembly. It can be reused and recycled

EVIL ENERGY 6AN Fuel Line Kit, 6AN Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black

Car Hoses Car Fuel Hoses

Buy on Amazon Find on eBay

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.

Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.

Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -22°F to 248°F.

Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 6pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.54inch.

6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

Read more Read less

EVIL ENERGY Fuel Pressure Regulator 6AN EFI Bypass Return Adjustable (30-70PSI)

Fuel Injection Pressure Regulators

Buy on Amazon Find on eBay

[Application] fuel regulator fit for most vehicle's EFI system.

[Medium] bypass fuel pressure regulator compatible with gasoline,E85 and alcohol/ethanol, not compatible with diesel fuel. (Nylon braided fuel line is not compatible with E85.)

[Adjustable Range] Adjustable fuel pressure: 30psi -70psi.Adjust the set screw on top to get the desired pressure.

[Note] The 6AN to M12x1.25 and 6AN to M14x1.5 fittings are for fuel rail use only, installation on fuel pressure regulator will result in leaks. When installing fuel regulator NPT pressure gauge port,please use thread sealant tape for sealing.

[Package Includes] 1 x fuel pressure regulator, 1 x pressure gauge, 1 x Bracket, 2 x AN6 port plug, 4 x 6AN to 6AN ORB fitting, 1 x 6AN ORB to 6AN Barb fittings, 1 x 6AN to M12*1.25 fittings, 1 x 6AN to M14*1.5 fittings, 3 x 6AN Stainless Steel Braided CPE Fuel Line.

Read more Read less

EVIL ENERGY 3.0 Inch V Band Clamp with Flange Male Female 304 Stainless Steel 4PCS

Car Hoses Clamps & Sleeving Hoses

Buy on Amazon Find on eBay

[Size] Joins 3.0" ID male/female flange to 3.0" OD pipe. T-Bolt thread size: M8*1.25.

[Advantage] V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange.

[Feature] Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation.

[Material] 304 Stainless steel clamp and flanges; 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance.

[Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

EVIL ENERGY 6AN Fuel Line, AN6 Braided Fuel Hose Nylon CPE 20FT Black

Car Hoses Car Fuel Hoses

Buy on Amazon Find on eBay

Parameter: This 6an braided fuel line can withstand high pressure and has a long-lasting lifespan. Maximum working pressure: 750 PSI. Bursting pressure: 2,250 PSI. Temperature range: -22℉ to 248℉.

Material: The 6an hose has a CPE rubber inner layer, a layer of 304 steel wire, and a nylon outer braid.

Compatibility: The braided fuel hose is compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel, fuel, and more.

Suitable for Widely Usage: The 6an braided fuel line is used for many purposes, including transmission oil cooler lines, fuel return lines, fuel supply lines, coolant fluid hoses, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines.

Size and Installation: Hose ID: 0.34 inch ; Hose OD: 0.54 inch; Length: 20 Feet. Installation instructions are included.It works with 6AN swivel hose end only.

Read more Read less

EVIL ENERGY Inline Fuel Filter 100 Micron with 6AN 8AN 10AN Adapter&Bracket Clamp 50MM Universal

Fuel Filters

Buy on Amazon Find on eBay

[Application] Universal fuel filter, includes an6, an8, an10 adapters for different size applications. With mounting bracket keeps the engine bar stylish and clean.

[Material] Aluminum alloy fuel filter can and stainless steel filter element.

[O-ring] The o-ring provides a tight seal for fittings and end caps.

[Function] Can be used for filtering gasoline, diesel, etc.(Not E85) Captures contaminant particles of 100 micron and above to protect the fuel system of the vehicle.

[Feature] Removable design, easy to clean or replace filter element at regular time.

Read more Read less

EVIL ENERGY 6AN Male to 3/8" Hardline Compression Fitting Adapter Aluminum Black 2PCS

Fuel System Fittings

Buy on Amazon Find on eBay

Size: 6AN male flare to 3/8 inch, the thread size of the 6 AN is 9/16 UNF. Fits to 3/8" OD hardline, please measure before purchase.

Material: Made of aluminium alloy fitting and brass ferrule.

Sealing: The AN thread of the flare is sealed by a 37 degree angle.

Application:This 3/8 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.

Note:Only applicable to stainless steel or aluminum hardline.

EVIL ENERGY Exhaust Muffler,Stainless Steel Exhaust Tip,Universal 14.6" Length (Burnt,2" Inlet 3" Outlet)

Car Exhaust Mufflers

Buy on Amazon Find on eBay

Premium Acoustic Control:EVIL ENERGY muffler is densely packed with excellent,sound-absorbing cotton,giving a low,deep tone that is reverberated to increase sound;Easy to install,bolts on in minutes

Size and Construction:This muffler is having 2" inlet,3" exit,14.6" length,polished stainless steel;It is universal,Please measure your car's inlet before purchasing

Working Principle:The walls of the muffler are made of two layers of stainless steel,which help reduce vibration and absorb sound

Material:The production process of stainless steel is sturdy and stable

Distinctive Appearance:The burned blue tip of the muffler offers an artistic focus point to the back of the car. Your vehicle will undoubtedly stand out among the crowd

Read more Read less

EVIL ENERGY FAQs

Is EVIL ENERGY Legit?

Yes, EVIL ENERGY is a legitmate brand on Amazon. After conducting a comprehensive analysis of 22,811 customer reviews for EVIL ENERGY products on Amazon, we have determined its average rating. With a strong performance and good quality, EVIL ENERGY has received an average rating of 4.6 from numerous buyers, indicating that EVIL ENERGY are trustworthy and live up to their claims. Therefore, it is safe to make purchases from EVIL ENERGY on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more EVIL ENERGY products?

If you're interested in EVIL ENERGY and want to find more EVIL ENERGY products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type EVIL ENERGY in the search box and hit Enter to see the search results.
Find and click the correct EVIL ENERGY to go to the new page.
Select the products you want in the EVIL ENERGY buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more EVIL ENERGY products.

How does findthisbest choose the top EVIL ENERGY products?

We analyze millions of EVIL ENERGY products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase EVIL ENERGY products via FindThisBest?

Go to the EVIL ENERGY page.
Select the product you want in the EVIL ENERGY buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product EVIL ENERGY 6AN Fuel Line Kit, 6AN Nylon Braided F..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the EVIL ENERGY products?

Most of the EVIL ENERGY products are produced by Speedwow Tuning and Speedwow. The manufacturers provide EVIL ENERGY with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the EVIL ENERGY products, helping you make more informed buying decisions. We recommend best choices of the products from the EVIL ENERGY brand, helping you make better shopping choices with less time and energy.

Similar Brands