WeldingCity

4.6 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, WeldingCity has 306 products for sale. WeldingCity products range in price from $8.99 to $73.99, and the average price of all the products is about $28.54.

We found that most of the WeldingCity products are manufactured by WeldingCity.com. The manufacturer provides WeldingCity with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase WeldingCity products from the seller WeldingCity. The brand holds an average rating of 4.6, testifying to its excellent reputation.

WeldingCity Best Sellers

Last Updated: Jan 9, 2026

WeldingCity 2-pk Mild Steel MIG Welding Wire ER70S-6 10-Lb Spool 0.030" (0.8mm) 8"-roll | Pack of 2 Rolls

Welding Wire

Buy on Amazon Find on eBay

Two rolls premium quality mild steel gas-shielding MIG welding wire ER70S-6 10-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.

Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).

Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 10-lb weight of welding wire; 8-in spool, 2-in center hole; wrapped in moisture-resistant plastic film.

Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.

Two 10-lb rolls at this price. U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 3/32" x 7" | 10-pk

Buy on Amazon Find on eBay

10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length.

AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed.

Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%; Tungsten remains. Non-radioactive Tungsten electrodes; excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability.

Package available: 10-pcs/box for each size of 0.040", 1/16", 3/32", 1/8" and 5/32".

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity 25-pk MIG Welding Gun Contact Tip 000068 | 770180 (0.035") for Miller M-Series M-10/M-100, M-15/M-150, M-25, M-40 and Hobart H-series MIG Guns

MIG Welders

Buy on Amazon Find on eBay

25-pcs premium MIG welding gun contact tips 000 series / 770-series for Miller M and Hobart H series MIG guns.

For use with Miller MIGmatic M Series MIG guns such as M-100 (M-10), M-150 (M-15), M25/25M, M40/40AL (Millermatic 250, 250X, 300 & Vintage), GA-17C (Sidekick & Cricket), GA-20C (Millermatic 35, 200, 250) and GA-21C/CM (Millermatic 35, 200, 250).

Also fits Hobart H-series MIG welding guns in welder Handler 125/135/140/175/187/210, Ironman 210/230/250 and Trek 180, as well as other equivalent mig welding gun using Miller/Hobart style contact tips.

Available tip sizes and reference numbers: 0.023" (087-299/770-174), 0.030" (000-067/770-177), 0.035" (000-068/770-180) and 0.045" (000-069/770-183). Tip length 1-1/8". Works with Miller gas diffuser 169-716 and 169-728. Current up to 400A.

25-pcs contact tips per package. U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity 5 Rolls of ER4043 Aluminum MIG Welding Wire 1-Lb Spool 0.035" (0.9mm) | Pack of 5

Welding Wire

Buy on Amazon Find on eBay

Premium quality ER4043 Aluminum MIG welding wire 1-Lb spool. Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm). Shielding gas: Argon or Helium or mix.

Specifications and Features: AWS A5.10/ASME SFA A5.10/ER4043. 1-lb weight of welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical Element Content (wt%) in Product: Si=4.5-6.0; Fe=0.8; Cu=0.3; Mn=0.05; Mg=0.05; Zn=0.1; Ti=0.2; Al=balance. 5% silicon aluminum (AlSi5) in filler metal welding wire. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. Less sensitive to weld cracking and produces brighter.

Applications: General-purpose, all-position aluminum welding wire used to weld various grades of aluminum; it contains silicon additives, which may improve fluidity of the weld pool and also produces a weld less sensitive to cracking; its bright weld finish makes it a popular choice of welders. Recommended for welding 3003, 3004, 5052, 6061, 6063, and casing alloys 43, 355, 356, and 214.

Package of one, two and five spools of 2-lb Aluminum wire.

U.S. based welding and hardware supplier.

Read more Read less

WeldingCity Power Cable Hose 57Y01R (Rubber, 1-Pcs Style) 12.5-ft for Air-cooled TIG Welding Torch 9-series and 17-series

Buy on Amazon Find on eBay

Premium quality TIG welding torch power cable hose (1-pcs style) and cable adapters connectors plugs for air-cooled torch 9-series and 17-series.

Weldcraft style one-piece style rubber-jacketed power cable hoses to fit 9-series and 17-series torch head. Rear fitting male 3/8"-24 RH. Available length: 12.5-ft (57Y01R), 25-ft (57Y03R-25) and 50-ft (57Y03R-50).

Available cable adapter plugs: Weldcraft style 105Z57 with electrical stud hole and female fitting 5/8-18 RH and 3/8-24 RH; Twist-lock adapter male plugs: Dinse-type 50mm (0.508"-12.9mm dia.) and 25mm (small, 0.355"-9.0mm dia) with options of in-line (gas-thru) and separate gas hose (solid pin). Female end 3/8"-24 RH to accept power cable hose 57Y01R/57Y03R and other equivalent air-cooled TIG welding torch 9-series and torch 17-series .

For Miller welder, Dinse (50mm) plug with separate gas hose (Miller P/N 195378) or gas-thru (Miller P/N 194722) can be found in Maxstar 200/200STR/200SD/200DX&LX/250T/300, Dynasty 200, 300SD/DX/LX, Syncrowave 180SD, CST, Invision and XMT. Dinse (25mm small) gas-thru plug (Miller P/N 273483 or 195234) is for power supplies with small gas-thru Dinse connection.

For Lincoln welder, Dinse (50mm) plug with separate gas hose (Lincoln P/N K960-1) or gas-thru (Lincoln P/N K1622-1) can be found in Lincoln PTA TIG torch series in Invertec V160-S/V205-T/V200-T/V250-S/V275-S/V300-Pro/V350-Pro, Square Wave TIG 175/275, Power Wave 355 and ALT304. Also compatible with many other brands TIG welders from ESAB, Everlast, Eastwood, AHP, etc. when working with 9 series and 17 series torches.

Read more Read less

WeldingCity 5-Lb ER70S-2 Mild Carbon Steel TIG Welding Rods 1/16"x36"

Buy on Amazon Find on eBay

Premium quality ER70S-2 mild carbon steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.

Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.

Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.

Package of 5-Lb and 10-Lb ER70S-2 TIG welding rods; diameter available: 0.045" (1.2mm), 1/16" (1.6mm), 3/32" (2.4mm) and 1/8" (3.2mm).

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity 25-pcs Contact Tips 14-35 (0.035") for MIG Welding Gun Lincoln Magnum 200-400 and Tweco Professional No.2 - No.4

MIG Welders

Buy on Amazon Find on eBay

Pack of 25 premium quality Tweco Lincoln style MIG welding gun contact tips 14 series. Available tip sizes: 0.023" (14-23), 0.030" (14-30), 0.035" (14-35), 0.045" (14-45), 0.052" (14-52), 1/16" (14-116) and 5/64" (14-564).

Ideal replacement for Lincoln contact tip KP14 series in Lincoln Magnum 200-400, Tweco Professional No.2/No.3/No.4 and SprayMaster series MIG welding guns, as well as many other specific MIG welding gun using Tweco 14-series contact tips.

Machined from a copper alloy tubing providing a consistent and smooth inside diameter surface. Each contact tip is marked showing wire diameter. Inside diameter tolerance is held to +/-.003". With excellent electrical properties ideal for use in standard welding application up to 400 Amp.

Threaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gun.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity W Type Acetylene Heavy Duty Welding Brazing Nozzle 4-W Size 4 for Victor 300 Series Torch Handles

Gas Welding Tips

Buy on Amazon Find on eBay

Premium quality brand-new heavy duty W-series acetylene gas one-piece type welding/brazing/preheating nozzle for Victor 300 series torches. Pack of 1 welding nozzle.

Spiral mixer W-type with double O-ring sealed to blend oxy-acetylene gas. Brass coupling nut with built-in snap ring. 65° elbow tip angle.

Heavy duty general purpose welding/brazing/preheating for use with oxy-acetylene gas. Available nominal tip orifices: 00, 0, 1, 2, 3, 4, 5, 6, 7 and 8.

Work with Victor heavy duty 300 series torch handles and other aftermarkets versions.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

WeldingCity Steel Conduit Liner 35-40-15 (.030"-.035") 15-ft for Lincoln Magnum 100L and Tweco Mini/No.1 MIG Welding Guns

MIG Welders

Buy on Amazon Find on eBay

Premium quality Tweco style steel conduit liner 23-40-15, 35-40-15 and 45-40-15 for Tweco and Lincoln 100-180A MIG welding guns. 15-ft long.

Accommodate MIG welding wires (steel and hard alloy) 0.023"-0.025" (23-40-15), 0.030"-0.035" (35-40-15) and 0.040"-0.045"(45-40-15).

Work with Tweco Mini and #1 and Lincoln Magnum 100L MIG welding guns. Lincoln's reference part number: KP23-40-15, KP35-40-15 and KP45-40-15.

Refer to your MIG welding gun user manual for selection of correct liner.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

WeldingCity Acetylene Medium Duty Welding Brazing Nozzle 1-W-1 Size 1 with W-1 Mixer for Victor 100 Series Torch Handles

Gas Welding Tips

Buy on Amazon Find on eBay

Premium quality brand-new acetylene gas one-piece type welding/brazing nozzle W-1 series for Victor 100 series torches (not for J-100 series). Pack of 1 welding nozzle.

W-1 type spiral mixer with double O-ring sealed to blend oxy-acetylene gas. Brass coupling nut with built-in snap ring. 65° elbow tip angle.

General purpose medium duty welding/brazing/preheating for use with oxy-acetylene gas. Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5, 6 and 7.

Work with Victor light to medium duty 100 series (not J-100) torch handles such as 100C/100FC/WH26/WH260 and other aftermarkets versions.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity 5-pk Gas Lens Collet Body 45V44 (3/32") for TIG Welding Torch 9, 20 and 25 Series in Weldcraft Lincoln Miller ESAB Weldcraft CK (5 Each/Pack)

Buy on Amazon Find on eBay

5-PK premium quality gas lens collet body 45V-series for gas-lens setup in TIG Welding Torch 9, 20 and 25.

Use with 13N-series collets and 53N-series gas lens ceramic cups in gas lens setup to significantly reduce gas turbulence in gas-shielding stream. TIG torch amperage 125A - 250A air-cooled and water cooled.

Gas lens collet body orifices for Tungsten electrode: 0.020" (45V41), 0.040" (45V42), 1/16" (45V43), 3/32" (45V44) and 1/8" (45V45).

Pack of 5 gas lens collet bodies for size 0.020", 0.040", 1/16", 3/32" and 1/8". Refer to your TIG welding torch user manual for selection of consumable parts.

U.S.-based welding and hardware supplier.

WeldingCity General Purpose Acetylene Gouging/Cutting Tip 1-118 Size 2 (2-1-118) for Victor Gas Torch | 1-PK

Gas Welding Tips

Buy on Amazon Find on eBay

Premium quality brand-new Acetylene one-piece gouging/cutting tip 1-118 series for Victor oxy-acetylene hand torch. Pack of 1 cutting tip.

Available nominal tip orifices: 0, 2, 4, 6 and 8.

Applications: deseaming, scarfing, gouging, weld preparation, removing defective welds and washing rivets. Professional Preheat.

Use with Victor torch MT-5/200/300/1065 and ST-900FC/1000FC/2600FC, etc. and other aftermarket cutting heads compatible with Victor apparatus.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

WeldingCity 10-Lb ER308L Stainless Steel 308 TIG Welding Rod 1/16"x36" | Pack of 10-Lb

Buy on Amazon Find on eBay

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

Package of 1-Lb, 5-Lb and 10-Lb ER308L TIG welding rods available.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity Mild Steel MIG Welding Wire ER70S-6 10-Lb Roll 0.035" (0.9mm) 8"-spool

Welding Wire

Buy on Amazon Find on eBay

Premium quality mild steel gas-shielding MIG welding wire ER70S-6 10-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.

Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 10-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.

Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).

Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

WeldingCity 2-Lb ER4043 TIG Welding Rod Aluminum 4043 3/32" (2.4mm) x 36" (914mm) | Pack of 2-Lb

Buy on Amazon Find on eBay

Premium quality ER4043 Aluminum TIG welding rods with available diameters 1/16", 3/32" and 1/8"; 36" length. Package of 2-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.10/ASME SFA A5.10/ER4043; 36" (914mm) length of rods with single end stamped (or marked on rod); typical chemical composition %: Si=4.5-6.0; Fe=0.8; Cu=0.3; Mn=0.05; Mg=0.05; Zn=0.1; Ti=0.2; Al=balance.

Features and Applications: filler metal ER4043 rod for TIG welding (GTAW) welding process; general-purpose, all-position aluminum welding rod used to weld various grades of aluminum; it contains silicon additives, which may improve fluidity of the weld pool and also produces a weld less sensitive to cracking; its bright weld finish makes it a popular choice of welders; shielding gas required, usually 100% Argon, Helium or mix.

Package of 2-Lb, 5-Lb and 10-Lb ER4043 Aluminum TIG welding rods available. With volume discount. Buy More Save More!

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity Quick Gas Connect Adapter Female 5/8"-18 RH B-size to Male Gas Plug 0.355" (9mm) Replacement for CK-QDGAP

Buy on Amazon Find on eBay

Quick gas connect adapter with female fitting 5/8"-18 RH B-size to male gas plug 0.355" (9mm) replacement for CK-QDGAP.

To make quick connect/disconnect for gas hose with B-size UNF male fitting 5/8"-18 RH.

9mm male quick disconnect for shielding gas.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

WeldingCity 3-pk Flat Soapstone with Metal Holder for Temporary Marking in Welding/Fabrication

Buy on Amazon Find on eBay

Premium soapstone marker with metal holder and spare kit for temporary marking in welding and fabricating operations.

Soapstone size: round (1/4" x 5") and flat (3/16" X 1/2" X 5").

3-pk Flat soapstone and metal holder for welding marking.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

WeldingCity 10-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32"x36" | Pack of 10-Lb

Buy on Amazon Find on eBay

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Package of 1-Lb, 5-Lb and 10-Lb ER308L TIG welding rods available.

U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity 2-pk Gas Nozzle 169-715 169715 1/2" for Miller Millermatic M-100 (M-10) M-150 (M-150) and Hobart H-9/H-10 MIG Welding Guns

MIG Welders

Buy on Amazon Find on eBay

Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders.

Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10.

Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice; tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers.

Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk.

U.S. based welding and hardware supplier.

Read more Read less

WeldingCity 2-Kg (4.4-Lb) Stainless Steel Stick Welding Electrodes E308L-16 3/32" Rods

Arc Welding Rods

Buy on Amazon Find on eBay

PRODUCTS: premium stick welding electrodes E308L-16 rods for stainless steel welding in metal fabrication, maintenance and repair work.

SPECIFICATIONS: AWS Classification E308L-16. Typical tensile strength of weld: 80,000 psi. Dimensions: 1/8" x 14" and 3/32" x 12".

FEATURES: Smooth running arc with a uniform weld bead. Good performance under severe conditions like oxidizing acids and cold or dilute-reducing acids. Low carbon content to reduce carbide precipitation thus increasing the resistance to inter-granular corrosion.

APPLICATIONS: Excellent for welding 18Cr-8Ni stainless steels AISI Types 301, 302, 304, 304L and 305, etc. in product forms of plate, pipe, fitting, castings such as dairy, distillery and restaurant equipment, and chemical tanks. Kept as dry as possible and may need rebaked before use. Heating and cooling should be carried out slowly.

U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question.

Read more Read less

WeldingCity FAQs

Is WeldingCity Legit?

Yes, WeldingCity is a legitmate brand on Amazon. After conducting a comprehensive analysis of 2,263 customer reviews for WeldingCity products on Amazon, we have determined its average rating. With a strong performance and good quality, WeldingCity has received an average rating of 4.6 from numerous buyers, indicating that WeldingCity are trustworthy and live up to their claims. Therefore, it is safe to make purchases from WeldingCity on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more WeldingCity products?

If you're interested in WeldingCity and want to find more WeldingCity products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type WeldingCity in the search box and hit Enter to see the search results.
Find and click the correct WeldingCity to go to the new page.
Select the products you want in the WeldingCity buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more WeldingCity products.

How does findthisbest choose the top WeldingCity products?

We analyze millions of WeldingCity products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase WeldingCity products via FindThisBest?

Go to the WeldingCity page.
Select the product you want in the WeldingCity buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product WeldingCity 2-pk Mild Steel MIG Welding Wire ER70S..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the WeldingCity products?

Most of the WeldingCity products are produced by WeldingCity.com. The manufacturer provides WeldingCity with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the WeldingCity products, helping you make more informed buying decisions. We recommend best choices of the products from the WeldingCity brand, helping you make better shopping choices with less time and energy.

Similar Brands