Or1More

4.6 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Or1More has 68 products for sale. Or1More products range in price from $11.29 to $67.99, and the average price of all the products is about $35.91.

We found that most of the Or1More products are manufactured by Jacobs. The manufacturer provides Or1More with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Or1More products from the seller Or1More Tools. The brand holds an average rating of 4.6, testifying to its excellent reputation.

Or1More Best Sellers

Last Updated: Jan 13, 2025

Craftsman 10" Contractor Table Saw Metal Handwheel Handle Crank 1/2" Tilt or Elevation Shaft

Buy on Amazon Find on eBay

4 1/2" diameter handwheel, fits 1/2" shaft. Used on the blade elevation and tilt shafts.

Fits Craftsman 113.xxxxxx model series belt drive contractor saws with 1/2" diameter shafts.

Replaces Sears Part Numbers: 818526, 62689, 820452, & 806872

Will not fit older model 113.xxxxxxx saws that have 3/8" diameter shafts.

Craftsman Belt Drive Contractor Table Saw 2 1/2" Pulley Set with Keys for 5/8" Arbor or Pulley Shaft

Buy on Amazon Find on eBay

Sears Craftsman Belt Drive Table Saw Arbor or Motor Pulley Set with Keys.

2 1/2" diameter pulleys fit a 5/8" keyed shaft.

A 3/16" square key and a 3/16" woodruff key is included.

Craftsman 10" Contractor Table Saw Upgrade Replacement V Belt Fenner PowerTwist

Buy on Amazon Find on eBay

Upgrade Craftsman Table Saw Replacement V-Belt

41" Fenner Drives PowerTwist Link Type Belt. It has a 1/2" top width and is equivalent to a 4L V-belt

This link type belt is an upgrade from the standard V-belt and reduces vibration.

Replaces Sears Part Number std304410

Or1More Rockwell Delta 14 inch Band Saw Upper Wheel,Lower Drive Shaft, and Blade Thrust Bearing Kit Early Models

Buy on Amazon Find on eBay

Replacement bearing Kit for Rockwell/Delta 14" Wood Band Saws

This kit is for early model (pre 1974) 14" band saws with extended inner race bearings. It will not fit later/current models (post 1974) that used non-extended race bearings.

Lower Bearings, SP-5338, 20mm ID, 47mm OD, 14mm wide outer race, and 15.24mm inner race. Upper Bearings. SP-5336, 15mm ID, 35mm OD, 11mm wide outer race, 12.2mm inner race Thrust Bearing, 77500, 10mm ID, 30mm OD, and 9mm wide.

Fits 1940's through 1974, Wood Cutting models with extended race bearings including 28-200, 28-230, 28-240, 28-285, 28-290, 28-345, 28-350, 28-365, 28-366, 28-651, 28-652, 28-653, 28-654, 28-656, 28-662, 28-663, 28-665, 31-425, 31-431, 37-207.

Will also fit early model Metal Cutting saws 28-205 (up to serial BK-3605), 28-207 (up to serial BK-3605) with lever style speed selectors. See last picture.

Craftsman Belt Drive Contractor Table Saw 2 1/2" Pulley with Keys for 5/8" Arbor or Pulley Shaft

Buy on Amazon Find on eBay

Sears Craftsman Belt Drive Table Saw Arbor or Motor Pulley with Keys.

2 1/2" diameter pulley that fit a 5/8" keyed shaft.

A 3/16" square key and a 3/16" woodruff key is included.

4-Step Cone Pulley 5/8" Keyed Bore; for Lathe, Drill Press, Scroll Saw etc. Replaces Craftsman

Buy on Amazon Find on eBay

4-Step Pulley for use with A/4L 1/2" belts.

Steps are at 2", 2 1/2", 3 1/2", & 4".

Pulley is 2 1/2" wide and fits a 5/8" diameter keyed shaft.

Will fit all brands and models of tools and motors that have a 5/8" keyed shaft.

All Metal Diecast Construction. Made in USA.

Sears Craftsman 10" Contractor Belt Drive Table Saw Replacement V-Belt

Buy on Amazon Find on eBay

Craftsman Table Saw Replacement V-Belt

41" Long Type 4L V Belt

Replaces Sears Part Number STD304410

Craftsman Table Saw Belt & Pulley Kit with 2 1/2" Pulleys, Keys, & Fenner PowerTwist

Buy on Amazon Find on eBay

Sears Craftsman Belt Drive Table Saw Replacement Pulley and Belt Kit

41" Fenner Drives PowerTwist V Belt

2 1/2" diameter pulleys with 5/8" keyed bore.

3/16" square key for the motor shaft

3/16" woodruff key for the arbor shaft

Sears Craftsman 10" Contractor Table Saw V-Belt Kit with 2 1/2" Pulley Set & Keys

Buy on Amazon Find on eBay

Sears Craftsman Belt Drive Table Saw Replacement Pulley and Belt Kit

41" Long 4L Type V Belt

2 1/2" diameter pulleys with 5/8" keyed bore.

3/16" square key for the motor shaft

3/16" woodruff key for the arbor shaft

Jet 14" Wood Band Saw Blade Thrust Bearings Set of 2, BB-6200ZZ 9100441

Power Tool Saw Blades Band Saw Blades

Buy on Amazon Find on eBay

Thrust Bearing Set for 14" Jet Band Saws. Set of 2.

These fit both the upper and lower positions.

Bearings have a 10mm ID, 30mm OD, and are 9mm thick.

These are sold under Jet part numbers: BB-6200ZZ & 9100441

Fits all JET JWBS-14 Series Models except the JWBS-14DXPRO and the JWBS-14SFX models.

Rockwell Delta 14" Band Saw Upper Wheel, Lower Drive Shaft, & Blade Thrust Bearing Kit Later Models

Buy on Amazon Find on eBay

Replacement bearing Kit for Rockwell/Delta 14" Wood Cutting Band Saws

This kit is for later/current model (post 1974) 14" band saws. It will not fit early models (pre 1974) that used extended race bearings.

Lower Bearings, 920-04-020-5348, 20mm ID, 47mm OD, and 14mm wide. Upper Bearings. 920-04-010-7273, 15mm ID, 35mm OD, and 11mm wide. Thrust Bearing, 920-08-020-1457, 10mm ID, 30mm OD, and 9mm wide.

Fits later and current models with non-extended race bearings including 28-200, 28-203, 28-206, 28-209, 28-216, 28-230, 28-231, 28-241, 28-243, 28-245, 28-248, 28-255, 28-262, 28-263, 28-270, 28-274, 28-275, 28-276, 28-278, 28-280, 28-283, 28-285, 28-290, 28-293, 28-299, 28-475, 28-300, 28-303, 28-348, 28-380.

Or1More Jacobs 1/2 inch Drill Chuck Wood Lathe Accessory MT2 Arbor Adapter No.2 Morse Taper

Buy on Amazon Find on eBay

No.2 Morse Taper Arbor with Jacobs brand 3-jaw screw on type drill chuck.

Arbor and chuck have 1/2"-20 threads. Chuck capacity is 1/2" (1.5 - 13mm).

Fits an MT2 Lathe Headstock Spindle or Tailstock Ram.

For all brands and models with MT2 Spindles & Rams

Craftsman 315 Model Series 10" Belt Drive Contractor Table Saw Handwheel Handle Crank 12mm Bore for Blade Tilt or Lift Shaft. (Please See Model List)

Buy on Amazon Find on eBay

This handwheel is for Craftsman Belt Drive Table Saw Models 315.228310, 315.228390, 315.228410, 315.228490, 315.228510, 315.228590, 315.228930, and 315.248200. It will not fit models that are not listed. It will not fit non-belt drive 315 models and will not fit any 113 series belt drive models..

4 1/2" Diameter Handwheel with a 12mm Bore, Fts 12mm round or "D" shaped shafts and attaches with a set screw. Used on the blade elevation and tilt shafts.

This handwheel attaches differently than the original. The attachment method is detailed in the last three photos

Replaces Sears Part Numbers: 979918-001, 979918-02 & 977227-002

Craftsman 10" Contractor Table Saw Metal Handwheel Handle Crank 3/8" Tilt or Elevation Shaft

Buy on Amazon Find on eBay

4 1/2" diameter handwheel, fits 3/8" shaft. Used on the blade elevation and tilt shafts.

Fits Older Model Craftsman 113.xxxxxx model series belt drive table saws with 3/8" diameter tilt and lift shafts.

This handwheel can be used to replace original handwheels part numbers 37835, 6579, and146.

Will not fit newer model 113.xxxxxx models that have 1/2" diameter blade elevation and tilt shafts.

or1More Jacobs 1/2 inch Drill Chuck Wood Lathe Accessory MT1 Arbor Adapter No.1 Morse Taper

Buy on Amazon Find on eBay

No.1 Morse Taper Arbor with Jacobs brand 3-jaw screw on type drill chuck.

Arbor and chuck have 1/2"-20 threads. Chuck capacity is 1/2" (1.5 - 13mm).

Fits an MT1 Lathe Headstock Spindle or Tailstock Ram.

For all brands and models with MT1 Spindles & Rams

Arbor Bearing Rebuild Kit Sears Craftsman 10" Belt Drive Table Saw 820015 113.xxxx

Buy on Amazon Find on eBay

Sears Craftsman 10", Belt Drive, Table Saw Arbor Bearing Kit. Fit most 113.xxxxxx model series saws.

Bearings are 5/8" ID, 35mm OD, and 11mm wide. These bearings have dual rubber seals same as the original bearings on later model saws.

Arbor Bearings Sears Craftsman 10" Belt Drive Table Saw Set of 2, 3509

Buy on Amazon Find on eBay

5/8" ID, 35mm OD, and 11mm wide

Fits Vintage Craftsman 113.xxxxxx model series belt drive contractor saws.

Replaces Craftsman part number: 3509

Or1More FAQs

Is Or1More Legit?

Yes, Or1More is a legitmate brand on Amazon. After conducting a comprehensive analysis of 605 customer reviews for Or1More products on Amazon, we have determined its average rating. With a strong performance and good quality, Or1More has received an average rating of 4.6 from numerous buyers, indicating that Or1More are trustworthy and live up to their claims. Therefore, it is safe to make purchases from Or1More on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more Or1More products?

If you're interested in Or1More and want to find more Or1More products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type Or1More in the search box and hit Enter to see the search results.
Find and click the correct Or1More to go to the new page.
Select the products you want in the Or1More buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Or1More products.

How does findthisbest choose the top Or1More products?

We analyze millions of Or1More products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase Or1More products via FindThisBest?

Go to the Or1More page.
Select the product you want in the Or1More buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Craftsman 10" Contractor Table Saw Metal Handwheel..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the Or1More products?

Most of the Or1More products are produced by Jacobs. The manufacturer provides Or1More with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the Or1More products, helping you make more informed buying decisions. We recommend best choices of the products from the Or1More brand, helping you make better shopping choices with less time and energy.

Similar Brands

Industrial Mineral Supply

Hit Tool