Skip to content
Edge Technology feature image

Edge Technology

4.7 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Edge Technology has 67 products for sale. Edge Technology products range in price from $24.99 to $149.99, and the average price of all the products is about $62.24.

You can confidently purchase Edge Technology products from the seller Edge Technology LLC. The brand holds an average rating of 4.7, testifying to its excellent reputation.

Share

Edge Technology Best Sellers

Last Updated: Jan 13, 2025

Edge Technology Pro Touch Off Gage Z axis Tool Setter

  • Accurately establishes tool length offsets for CNC milling machines. Includes high quality padded case.
  • Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length.
  • The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this)

Chuck Stop Spider by Edge Technology

  • 10 sets of hardened parallel bars with case. 0.0002" parallelism accuracy.
  • Parallel bar heights from 1/2" to 1-5/8" in 1/8" increments.
  • Strong neodymium magnets secure the Chuck Stop to the chuck face. Spider made from high strength alloy.

Edge Technology Tailstock Alignment Bar

  • Hardened steel bar ends are precision ground after assembly for superior accuracy. Bar end diameters are equal within 0.0002".
  • Bar made from high strength aluminum with durable anodized finish.
  • Overall length is 12.250" / Diameter is 1"

Edge Technology Indicator Holder (Clamp Mount) Red

  • Clamps to the spindle nose without the need to remove tooling from the collet. Fits spindle diameters 1.45” to 1.95”. It will also fit 1.750" boss on most CAT tool holders.
  • Extra rigid design to eliminate the possibility of flex. Proprietary friction technology used to provide smooth consistent resistance.
  • Designed to keep the indicator tip on a plane that intersects the spindle axis.

Edge Technology Tool Post Indicator Deluxe

  • Designed to indicate the OD, ID, and face of the workpiece. Mounts to any tool post holder AXA or larger.
  • ¼” travel / 0.0005” resolution indicator included.
  • The Stylus of the Hole Attachment is supported by two micro roller bearings.

Edge Technology Indicator Holder (Shank Mount)

  • Extra rigid design to eliminate the possibility of flex. Proprietary friction technology used to provide smooth consistent resistance.
  • Designed to keep the indicator tip on a plane that intersects the spindle axis.
  • 3/8" Shank Diameter. Made from high strength aluminum. Durable red anodized finish.

T-Slot Cover 5/8” for Milling Machine by Edge Technology (Red)

  • Fits 5/8” T-Slot only. The extrusion size is approximately 0.640” wide x 1.015” tall
  • Made from high temperature silicone rubber. The hardness is approximately shore 70A.
  • Package includes one piece that is 150” long, which is more than enough for a 9”x48” manual milling machine table. Large CNC mill tables may require more than one package.

Multi Axis Vise Stop by Edge Technology

  • Unique design stays completely below the top surface of vise jaws for cutter clearance.
  • Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy.
  • Versatile design allows the 5/16" hardened stop rod to be quickly and accurately positioned.

Edge Technology Pro Tram System (1/2" Shank / 0.001" Indicators)

  • Square the head of a milling machine quickly and easily. (1/2" Shank Size / 0.001"Indicator graduations)
  • To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same.
  • Includes high quality padded case.

Edge Technology Vise Jaw Stop

  • The stop pin is positioned completely below the top surface of vise jaw to allow for cutter clearance.
  • 1/8" x 2" hardened stop pin is used to accurately locate workpieces. The stop pin is also adjustable side-to-side to allow for cutter clearance.
  • Fits all milling machine vises with 1/2" - 7/8" thick jaws and 1/8" minimum protrusion.

Edge Technology Pro Lathe Gage

  • Set turning, and facing tools on spindle axis for optimum cutting conditions.
  • Recessed body profile is compatible with boring bars.
  • Precision glass vial level with 30'/2mm sensitivity. Adjustable level mount.

Machinist Jack by Edge Technology

  • Heavy duty ¾”-6 ACME screw thread.
  • Large 1.4” contact pad diameter.
  • Sized to work with the bed height of a standard 6” milling vise.

Edge Technology Pro Vise Stop Single Side 6"

  • Low profile design stays below the top surface of vise jaws for cutter clearance.
  • Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned. Two sets of mounting holes for added versatility.
  • Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy.

Magnetic Back Carriage Indicator by Edge Technology

  • Body made from CNC machined aluminum. High precision 1" travel / 0.001" resolution indicator included.
  • Strong neodymium magnets are used to secure the unit to the ways of the lathe.
  • The indicator tip is mounted on an adjustable swing arm allowing it to contact different points on the carriage.

Edge Technology Parallel Separator Red

  • Strong compression springs are used to expand the unit.
  • Sized to fit a 6" vise.
  • Durable all metal construction.

Edge Technology Tool Post Indicator

  • High resolution 0.0005" indicator included.
  • Mounts in any tool post tool holder.
  • Body made from high strength aluminum. Durable anodized finish.

Edge Technology Mill Organizer

  • Designed to fit standard 6" calipers.
  • Multiple compartments used to segregate endmills and prevent damage to cutting edges.
  • Mounts using 3/8" T-slot on table front (mounting hardware included). Compatible with Bridgeport brand power feed connecting rod.

Edge Technology 2 Position Vise Handle 3/4" Hex Size

  • The center position of the handle allows the vise to be opened and closed rapidly.
  • The outer position of the handle provides the correct amount of leverage for clamping most work pieces.
  • Made from high strength aluminum alloy.

Edge Technology Speedy Lathe Gage

  • Set turning and facing tools on spindle axis for optimum cutting conditions.
  • Precision glass vial level with 30'/2mm sensitivity.
  • Adjustable level mount.

5C Collet Stop by Edge Technology

  • Fits standard 5C collets with internal threads.
  • 6 hardened steel stop rods included. (1/16", 1/8", 3/16", 1/4", 3/8", 3/4")
  • 3/4" stop rod is designed to keep parts square to spindle axis. Proprietary locking system prevents the possibility of the stop rod slipping in the body.

Edge Technology FAQs