Skip to content
CNCYEAH feature image

CNCYEAH

4.4 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, CNCYEAH has 40 products for sale. CNCYEAH products range in price from $4.69 to $122.39, and the average price of all the products is about $29.74.

You can confidently purchase CNCYEAH products from the seller CNCYEAH. The brand holds an average rating of 4.4, testifying to its excellent reputation.

Share

CNCYEAH Best Sellers

Last Updated: Jan 13, 2025

CNCYEAH Ceiling Fan Capacitor 1PCS 3.5uf+4uf+2.5uf 250V/300V CBB61 Start Run Ceiling Fan Capacitor 5 Wire Replacement Parts

  • PACKAGE INCLUDED: 1PCS 3.5uf+4uf+2.5uf 250V/300V CBB61 Ceiling Fan Capacitor
  • SPECIFICATION: Cable Length: About 10cm;Rated Voltage: 250V/300V AC;Rated capacitance :3.5uf+4uf+2.5uf;Tolerance/Rated Frequency: ±5% 50/60Hz
  • ADVANTAGE: With low dissipation, high insulation resistance and stable capacitance.With terminals for easy mounting.

CNCYEAH Ball Screw SFU1605 800mm Diameter 16mm,5mm Pitch Ball Screw Kit with Ballscrew Nut Housing Bracket and End Supports BK/BF12 nut housings Coupler for CNC Machine Parts

  • SEPCIFICATION: Diameter: 16mm ,Lead/Pitch: 5mm , length: 800mm
  • PACKAGE CONTAINS: 1 x Ball Screw, 1 x Nut, 1 x BK12,1 x BF12, 1 x Coupler
  • HIGH QUALITY: Non slip effect, heats up less, less driving force required, high static and dynamic rigidity.

CNCYEAH Hand Screw Leveling Feet 30PCS M6 x 25 x 30mm Adjustable Leveler Floor Protector for Machine Furniture Table Desk Leg

  • Specification: 4 x adjustable leveling feet. Product Size: M6 x 25 x 30mm/M6 x 0.98 Inch x 1.18 Inch(Thread Diameter*Thread Length*Base Diameter); Adjustable Range of Height: 13-28mm/0.51"- 1.10"; Base Size: 30 x 12mm/1.18" x 0.47"(D*H);
  • Keep Balance:If the floor is rough or the leg of the product is bad, you can installed it at the bottom of your product to stay balanced. It can effectively protect the product during the movement, prevent scratches and reduce sharp noise.
  • Mute and adjustable foot pads: The bottom of the furniture (tables, chairs, stools) is connected with screws to prevent floor wear, reduce noise, and increase the height of furniture.

CNCYEAH Rubber Mounts Shock Absorbers M6 5 Pack,VD20*15 M6*18 Rubber Studs Shock Absorber Anti-vibration Isolator Mounts,Rubber Cylindrical Vibration Isolation Mount

  • RUBBER SHOCK ABSORBER KIT: 5pcs M6 Rubber Mounts Shock Absorber Anti Vibration Silentblock Car Boat Bobbins
  • COMPACT AND STABLE: Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
  • FUNCTION: protect the normal state of the equipment and obtain a good working environment. The effect of damping and noise reduction is very obvious.

CNCYEAH Honeycomb Laser Bed 500x500mm Magnetic Steel Honeycomb Cutting Mat 19.68 x 19.68 for Laser Engraver Cutter Tray for Laser Cutting

  • Secure Protection Design: The aluminum honeycomb gridwork 500x500mm is attached to the honeycomb working table with rivets. There are four corner guards on the metal border to prevent cuts, and keep the the honeycomb laser bed from deforming.
  • Quick Measurements Markers: X axis and Y axis are equipped with clear and high-precise scale lines (mm), you can measure the size of the engraving quickly in a handy way.
  • Better Effect for Cutting and Engraving: The Honeycomb structure design can not only absorb and deflect the laser and debris, but also make the material not easy to be smoked black or yellowing. Its the necessary accessories to makes material edges clean and smooth.

CNCYEAH Linear Rail SBR12 400mm 2PCS Linear Rail Guide with 4 PCS SBR12UU Square Type Carriage Bearing Blocks Linear Rails and Bearings Kit for DIY CNC Routers Lathes Mills Automated Machines

  • PACKAGE INCLUDED: 2 X SBR12 fully supported linear rail,4 X SBR12UU motion router solide block bearing
  • PREMIER LINEAR GUIDING SYSTEM: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside.
  • EASY TO USE: Aluminum alloy support rail with pre-drilled holes for ease of mounting.The linear guide rail can be applied to DIY CNC routers lathes and mills, Easy to install, no need to maintenance.

CNCYEAH Jack Rubber Gasket 2PCS 125 * 125 * 26mm Universal Floor Jack Rubber Pad Jack Pad Adapter Pinch Weld Side Frame Rail Protector Puck

  • PRODUCT PARAMETERS FOR JACK RUBBER: Diameter: 4.92inch/125mm. Thickness: 26mm/1.02inch; Net weight: 0.11lbs/245g ; Capacity: 2-3 ton ; Set includes 2 pack
  • HIGH QUALITY:Heavy duty construction rubber material,MAXIMUM Load Bearing: 2 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
  • JACK SUPPORT CUSHIONING PRESSURE PAD: Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.

CNCYEAH Adjustable Furniture Leg 30PCS M6 23 x 28mm Screw on Furniture Glide Leveling Feet Adjustable Leveler Pad for Chair Industrial Machine Desk Leg

  • SPECIFICATION FOR Adjustable Furniture Leg:Thread Size: M6, Product Size: M6 x 23 x 28mm/M6 x 0.91 Inch x 1.1 Inch(Thread Diameter*Thread Length*Base Diameter); Thread Pitch: 1mm.
  • FUNCTION: The plastic base is specially designed for moisture and silence resistance. And The furniture feet can reduces friction & noise while moving furniture.
  • KEEP BALANCE:If the floor is rough or the leg of the product is bad, you can installed it at the bottom of your product to stay balanced. It can effectively protect the product during the movement, prevent scratches and reduce sharp noise.Its a great must-have for the family.

CNCYEAH Aluminum Profile Extrusion 2040 1220mm 10PCS V Slot Black European Standard Anodized CNC Aluminum Profile 10 Sets connectors 50PCS Nuts 1PC Spanner for DIY 3D Printer

  • TYPE: European standard 2040 1220mm Aluminum Profile, Size:approx. 20*40mm:Length:approx.1220mm
  • Aluminum Profile Kit: 10PCS 2040 1220mm V slotted Aluminum Profile,10 sets of L-shaped corner slot connectors,50PCS Black nuts,1 PCS spanner
  • HIGH QUALITY ALUMINUM PROFILE: High-strength European standard aluminum profile, except Beautiful and stylish appearance in addition made with 6063 Aluminum material. Adapting the latest anodizing technology, and robust construction, corrosion resistance.

CNCYEAH Fixed Ring Rail 4PCS Limit Block Fixed Ring for HGR20 Linear Guide Rail for DIY CNC Routers Kit Lathes Mills

  • HGR20 LINEAR RAIL KIT: 4 x HGR20 limit block
  • Suit for HGR20 Linear Guide Rail
  • Effect for limit block: adjust and fix the position of the slider on the guide rail.

CNCYEAH Jack Hammer Drill Bit Set 12 inch 2 PCS PH65A30×410×35 flat chisel hexes 2 PCS PH65A30×410mm chisel hexagonal points Demolition Hammer Drill Flat Tip and Bull Point Chisels

  • Specification: Includes 2 bull point chisel and flat chisel, 16 inch x 1 inch (25x400mm), 1-1/8 in. hex shank, fit 1-1/8" hex size for jack hammer.
  • Solid Structure: The Jack Hammer Demolition bits connected tightly with the tamper shank, and the tamper set can be installed in the Jackhammer by putting the bits in the right place.
  • Excellent Efficiency: With compactor plate working in front of the Jackhammer, no matter what kind of materials, can all be tamped and compacted flat and firm for making a solid foundation. Materials can be loose granular soils, dirt, gravel, and sand, etc.

CNCYEAH Burnishing Wheel 115x100x19mm Abrasive Flap Wire Drawing Polishing Black Steel Wire for The Surface Treatment of Metal Products

  • Uses fiber mesh as the carrier and firmly adhere the sharp abrasive grit to the fiber mesh, the emery material will not fall off during the high-speed grinding process.
  • While grinding at high speed, the durable fiber mesh polishes and smoothes the slip marks left by the abrasive particles on the surface. Not only polished the coating but also the surface of the object without damage. It is more suitable for polishing thin metals.
  • Has a soft and honeycomb shape,It canfacilitate the removal of chips, prevent the grinding particles from flying as well as sparks.It is safer with low noise.It can last 10-30 times life span of ordinary angle grinders.

CNCYEAH Aluminum Profile Extrusion 4040 600mm 2PCS T Slot European Standard Anodized CNC 3D Printer Parts European Aluminum Profile Extrusion Linear Rail for DIY 3D Printer Silver

  • TYPE: European standard 4040 Aluminum Profile
  • PACKAGE INCLUDED: 2 x Aluminum Profile;Size:approx. 40*40mmï¼›Length:approx.600mm
  • HIGH QUALITY ALUMINUM PROFILE: High-strength European standard aluminum profile, except Beautiful and stylish appearance in addition made with 6063 Aluminum material. Adapting the latest anodizing technology, and robust construction, corrosion resistance.

CNCYEAH MGN9H 1PC Linear Rail Guide 250mm Black Miniature Linear Sliding Gide with 1PC Black MGN9H Carriage Block with Steel Beads Limit Blocks for DIY 3D Printer and CNC Machine

  • MGN LINEAR RAIL KIT: 1X MGN9H 250mm Black Miniature linear guide,1 X MGN9H Black Carriage Block,Steel beads,Limit blocks
  • Specification for MGN Miniature linear guide: Rail width: approx. 9mm;Rail height: approx. 6.5mm
  • EASY TO USE: easy of mounting.The linear guide rail can be applied to DIY CNC routers lathes and mills, Easy to install.

CNCYEAH Linear Motion Ball Bearing Slide 2PCS 12mm x 500mm Linear Rail Shaft Rod 4PCS Block Bearings SCS12UU 4PCS SK12 Support Base 1PC Wrench CNC Parts Kits for CNC Automated Machines Equipments

  • LINEAR RAIL KITS:2PCS 12mm x 500mm Linear Rail Shaft Rod,4PCS Block Bearings SCS12UU,4PCS SK12 Support Base,1PC Wrench
  • PREMIER LINEAR GUIDING SYSTEM: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard block, with a high precision linear bearing inside.
  • EASY TO USE: Aluminum alloy support rail with pre-drilled holes for ease of mounting.The linear guide rail can be applied to DIY CNC routers lathes and mills, Easy to install, no need to maintenance.

CNCYEAH Ball Screw SFU1605 1550mm Diameter 16mm,5mm Pitch Ball Screw Kit with HM12-57 Nema 23 Metal Stepper Motor Steel Mounting Bracket Nut Housing End Supports BK/BF12 Coupler for CNC Machine Parts

  • SEPCIFICATION for Ballscrew: Diameter: 16mm ,Lead/Pitch: 5mm
  • BALL SCREW KIT CONTAINS: 1 x SFU1605 1550mm Ball Screw, 1 x DSG16H Nut, 1 x BK12/BF12 End Machining, 1 x BR 6.35mm x 10mm D25L30 Coupler,1 x HM12-57 Nema 23 Metal Stepper Motor Steel Mounting Bracket
  • HIGH QUALITY: Non slip effect, heats up less, less driving force required, high static and dynamic rigidity.

CNCYEAH Adjustable Foot Cups 6PCS M8 Thread 50mm Diameter Reinforced Nylon Base Articulated Feet Furniture Leg 84mm Leveling Foot

  • Dimensions: Total Height: 83mm/ 3.27"; Base Diameter: 50mm/ 1.97",Thread Diameter: M8/ 0.3"; Thread Length: 50mm/ 2". Each package contains 5pcs leveling feet adjuster.
  • Mute and adjustable foot pads: The bottom of the furniture (tables, chairs, stools) is connected with screws to prevent floor wear, reduce noise, and increase the height of furniture.
  • Materials: Our threaded studs are made from galvanized steel with black PP non-skid base.

CNCYEAH DSG16H Nut Housing Seat Ball Screw Mount Bracket Holder 28mm Dia for SFU1605 CNC Machine Parts, Silver (S38013G7JS115ZF39OG95Y)

  • PACKAGE INCLUDED: 1pcs DSG16H Nut Housing
  • WIDELY USED: Used for CNC machine parts SFU1605 ball screw
  • HIGH QUALITY: Non slip effect, heats up less, less driving force required, high static and dynamic rigidity.

CNCYEAH 2020 Corner Bracket 10PCS L Shape Silver 5 Hole Aluminum Extrusion Connector 50PCS M5*8mm Screws 50PCS Wrench for 2020 Aluminum Extrusion Profile

  • 20x20 series aluminum L bracket plate Kit Included: 10pcs 2020 joint plate Silver L shape, 50 pcs M5 t nuts, 50 pcs M5x8mm hex screws , 2 pieces wrench.
  • Features:Each Bracket Plate adopts 5 hole design, firm and not loose, Rigid connection.
  • Suit for: Fit for 2020 series Aluminum extrusion, model is L joint, not T joint, connect aluminum profile 3D printer frame.

CNCYEAH Sabre Tools SDS Plus Flat chisel Thinset Scraping Bit 75 * 250mm Thinset Scaling Chisel, SDS Chisel Bit for Hammer Drills

  • FLAT CHISEL:3''(75mm)*10''(250mm),
  • DURABLE: Made from high-grade forged and heat treated steel to increase impact durability and reduce breakage.
  • COMPATIBLE: Works with all SDS Max demolition hammers and rotary hammers with chipping function.

CNCYEAH FAQs