DIYmall feature image

DIYmall

Review rating Review rating Review rating Review rating Review rating 4.4 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, DIYmall has 232 products for sale. DIYmall products range in price from $6.59 to $47.99, and the average price of all the products is about $17.73. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase DIYmall products from the seller DIYmall. The brand holds an average rating of 4.4, testifying to its excellent reputation.

DIYmall Best Sellers

Last Updated: Jan 11, 2026

DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT

WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
The MCU is different, so the definitions of V2 and V3 GPIO pins are different
Upgraded V3 version has better impedance matching of RF circuits
When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board

DIYmall 10PCS 8 RGB LED Stick 8 X WS2812B 5050 RGB LED with Integrated Drivers forArduino Raspberry Pi DC4-7V

Voltage: DC4-7V
Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s
Communication interface: Single-wire communication, each pixel is individually addressable
Application: Full-color module, Full color soft lights a lamp strip, LED decorative lighting, Indoor/outdoor LED video irregular screen
What you will get: 10 X WS2812 5050 RGB LED Module

DIYmall 2.8'' ESP32 Module ESP32-2432S028R WiFi+BT Dual-core 240X320 Smart Display Screen LCD TFT Module ILI9341 Driver for Arduino IoT

ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions
Real lnternet of Things development tool with a control-lable display screen, which can be used for APP remote control, remote environmental data collection, remote data fusion, remote Parameter setting and other loT development applications
It can customize the app control module and interface, which is very suitable for making an app interface that meets its own requirements
Support: UART/SPI/I2C/PWM/ADC/DAC and other interfacesOV2640 and OV7670 cameras, built-in flashpicture WiFI uploadTF cardmultiple sleep modesEmbedded Lwip and FreeRTOSSTA/AP/STA+AP working modeSmart ConfigAirKiss one-click network configurationsecondary development
Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications

DIYmall ESP8266 ESP-01S WiFi Serial Transceiver Module with 4MB Flash

4MB Flash Memory
Latest version esp-01s, with stronger signal
Document: https://nurdspace(dot)nl/ESP8266
About program: Please choose "Generic ESP8266 Module" board in Arduino-IDE to program
What You Get: 1 X ESP8266-01S Module

DIYmall 2PCS Micro-USB Cable Fast Charging Cords Data Transfer Cable 30cm for Android-Phone Micro-USB Port ESP32 ESP-32 Project

Used for various Micro-USB port devices, data transfer and charge
Interface: Micro-USB to USB 2.0
Cable Length: 30cm/11.8"
Color:Blue
What you will get: 2 X Micro-USB Cable

DIYmall 5PCS 12 X WS2812B RGB LED Rings 12 Bits 5050 Lamp Light with Integrated Driver Full Color Lights DC 5V for Arduino Raspberry Pi

LED Chip: WS2812B; Communication interface: Single-wire communication
Voltage: DC5V, usually we use USB 5V to power it
Note: The led ring doesn't come with cable
You can set the led brightness in the arduino code, and also you can program each light individually
What you will get is: 5pcs 12Bits WS2812B 5050 RGB Led rings

DIYmall 2.4G WiFi Antenna with U.FL to Female SMA Cable, 3DBI Gain Antenna for Arduino Wemos D1 M1 ESP8266 ESP32 ESP-07 2pcs

Antenna length:10.8cm; Cable length:14cm
If you have a U.FL connector (the ity bity one) then use the cable, else the next most popular is the full size SMA connector in which case the 3DBI Antenna will screw on directly
Extended range 3BI Adjustable WiFi Antenna with gold plated U.FL to Female SMA connection cable
If you are looking for extended WiFi range from your ESP8266, CC3000 or other WiFi based projects, then this Antenna package is what you need
What You Get: 2 X 3DBI WiFi Antenna, 2 X U.FL to Female SMA Cable

Mini PiTFT 1.3" LCD Display 240x240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color(Pack of 2PCS)

Document link is https://github(DOT)com/IOT-MCU/Mini-PiTFT-for-Raspberry-Pi/wiki/Usage
TFT size: 1.3" diagonal, Voltage: 3.3V, Interface: SPI, Driver: ST7789, Color: Full color
The Mini Pi TFT 1.3 " - 240x240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi, to give you a little display
The Mini Pi TFT comes with a full color 240x240 pixel IPS display with great visibility at all angles
The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case
What you will get: 2 X Mini PiTFT 1.3" LCD Display

2.8inch ESP32-2432S028R Display with Acrylic case Resistive Touchscreen 240x320 TFT ILI9341 Driver LCD Module WiFi+BT ESP32 Development Board for Arduino IoT

Dual-core MCU ESP32 Development Board, integrated WI-FI and Bluetooth functions
The main frequency: 240MHz, 520KB SRAM, 448KB ROM; Flash size: 4MB+4MB; Resolution: 240x320, resistive touchscreen
Includes: backlight control circuit, touch screen control circuit, speaker drive circuit, photo sensitive circuit and RGB-LED control circuit, TF-card interface, serial interface, temperature and humidity sensor interface (DHT11 interface) and reserved IO port interface
Supports development in Arduino-IDE, ESP IDE,Micropy-thon and Mi-xly
What you will get: 1 X 2.8-inch ESP32 Display + 1 X Acrylic case

DIYmall RC Servo Tester 3CH Digital Multi Servo Tester ECS RC Consistency CCMP Master Speed Controller Checker

CCPM Servo Consistency Master/Servo tester
The device also can be used as a signal generator for electric speed controller (ESC)
With it, you can test your motor system without using a transmitter and receiver
There are 3 modes to check servos or ESC,the ability to easily detect and configure the server's virtual spaces, jitter and median. It can connect 3 servos of the CCPM helicopters and select servos
What you will get is: 1 X Servo tester. Any question, pls feel free to contact us

DIYmall FAQs

Yes, DIYmall is a legitmate brand on Amazon. After conducting a comprehensive analysis of 2,366 customer reviews for DIYmall products on Amazon, we have determined its average rating. Offering great value and satisfying quality, DIYmall has achieved a respectable rating of 4.4 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from DIYmall on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in DIYmall and want to find more DIYmall products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type DIYmall in the search box and hit Enter to see the search results.
  3. Find and click the correct DIYmall to go to the new page.
  4. Select the products you want in the DIYmall buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more DIYmall products.

We analyze millions of DIYmall products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 232 DIYmall products for sale, 10 of which were analyzed in detail and recommended to customers.

  1. Go to the DIYmall page.
  2. Select the product you want in the DIYmall buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Devel..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the DIYmall products, helping you make more informed buying decisions. We recommend best choices of the products from the DIYmall brand, helping you make better shopping choices with less time and energy.