Skip to content
Geekstory feature image

Geekstory

4.3 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Geekstory has 120 products for sale. Geekstory products range in price from $6.99 to $26.99, and the average price of all the products is about $13.19. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase Geekstory products from the seller Geekstory. The brand holds an average rating of 4.3, testifying to its excellent reputation.

Share

Geekstory Best Sellers

Last Updated: Jan 11, 2026

Geekstory for ATMEL 51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable + 10Pin to 6Pin Adapter Board for Ender 3 or Ender 3 Pro

  • This USBASP Programmer only supports WINDOWS system. It can be directly connected to the USB interface of the computer, which is very convenient to use. Driver installation is required to start the usb to isp.
  • This USBASP Programmer is using onboard ATMega8 chip. With power and programming two lights, the target board suopports 5V and 3.3V power supply New self-adaptive automatic speed control, the asp is the new version, with pin on JP2.
  • Reserved MOSI, MISO, RET, SCK, VCC, GND. 6PIN interface, user-friendly connection to the target board.

Geekstory WiFi Antenna Dual Band 2.4GHz 5.8GHz 12dBi RP-SMA Male Antenna 20cm+U.FL IPX IPEX to RP-SMA Female Cable RG1.13 for WiFi Router Wireless Adapter Network Card Security Camera(Pack of 4)

  • Antenna type: This Antenna is a high-gain Omni-directional antenna. Dual Band WiFi: 2.4GHz (2400 - 2500 MHz), 5GHz/5.8GHz (5150 - 5810 MHz); Gain: 12dBi; Antenna Connector: RP-SMA Male Connector. Cable: 10cm; U.FL IPX IPEX to RP-SMA Female
  • Widely used in Wireless Network Router, WiFi USB Adapter, WiFi Signal Booster Repeater, WiFi Range Extender,5GHz 5.8GHz FPV Camera Monitor, Wireless Video Transmitter and Receiver, Wireless HDMI Extender
  • Package List: 4 x WiFi Antenna+4 x RP-SMA Female to U.FL IPEX Pigtail Cable

VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory

  • VK-162 GPS support windows(xp/7/10/11) and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
  • The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
  • It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room

Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS

  • G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Raspberry pi, Linux and Google Earth, not for iOS Android system.
  • The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
  • You need to install driver before use it on window, but plug and play for raspberry pi and Linux. If you need some driver links and using videos for G72 gps usb, Please contact us.

Geekstory Acrylic Case for ESP32-2432S028R 2.8-inch Display, TFT Resistive Touch Screen Transparent Protective Shell ESP32 Development Board Transparent Case

  • This acrylic shell is designed specifically for the ESP32 2.8-inch screen development board, ensuring perfect fitand compatibility, providing comprehensive protections and support
  • Note: Only use for ESP32-2432S028R 2.8inch TFT Resistive Touch Screen Display
  • Material: Acrylic--it has the characteristics of high transparency and durability, and effectively protecting the development board

Geekstory 24 Bits WS2812 5050 RGB LED Ring Lamp Light Stage Light with Integrated Full Color RGB Ring Drivers for Arduino Raspberry Pi ESP32

  • Full color Programmable LED Strip, WS2811 IC Built in 5050SMD, You can set the led brightness in the arduino code, and also you can program each light individually
  • The LED Rings are individually addressable and can be controlled by WS2812 integrated circuits, allowing for customizable colors and brightness levels
  • Note: The led ring doesn't come with cable

Geekstory 5V Laser Receiver Sensor Detection Module Non-Modulator Tube for Arduino Geekstory(Pack of 5)

  • The sensor uses a non-modulated laser receiver.
  • Please use this sensor in dark environments or indoors where no light. Sunlight or other fixtures may interfere.
  • It output high level when receive laser signal, and low level when not.

32db High Gain Cirocomm 5cm Active GPS Antenna Ceramic Antenna I-P.EX Antenna 25x25x5mm Geekstory

  • With Center Frequency 1575.42MHZ
  • I-P.EX Connector
  • DC 3V - 5V voltage, 10mA power

Geekstory CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module +SOIC8 SOP8 Test Clip for EEPROM 93CXX/25CXX /24CXX

  • You will get CH341A Programmer Module + Test Clip. SOIC8 SOP8 Test Clip For EEPROM 24CXX / 25CXX / 93CXX in-circuit programming
  • The SOP8 clip enables in-circuit programming of EEPROM without disassembling the chip, making flashing the BIOS simpler and more efficient.
  • The main purpose of the CH341A Programmer is to back up, erase, program, calibrate and other actions on various software.

Geekstory Active GPS+GLONASS Navigation Antenna with SMA Male Connector 33dB Gain GPS External Antenna 3m Cable for Vehicle GPS Navigation System Module GPS Tracker Locator Real Time Tracking

  • Frequency: GPS1575.42/1602MHz; LNA Gain: 33dB; Power Supply: 3V to 5V; Power Supply DC Current: ≤20mA; Feature: Magnetic Mounting(Magnetic base allows you to conveniently attach it to to the roof of your car)
  • Cable Type: RG174; Cable Length: 3m/9.84ft; Connector: SMA Male; Waterproof: IP67
  • Package List: 1 x GPS Antenna

Geekstory Feetech FS90R 360 Degree Continuous Rotation Micro Servo Motor + RC Tire Wheel for Arduino Micro:bit (Pack of 4)

  • This feetech servo has CE & ROHS certificate. Servo Stall torque: 1.3kg.cm/18.09oz.in(4.8V), 1.5kg.cm/20.86oz.in(6V).
  • Operating speed is 110RPM (4.8V), 130RPM (6V), but you can change the pwm to change the servo speed , to make it slower or faster
  • This black plastic wheel is press-fit onto the FS90R output gear shaft, and easy to make a nice drive solution for small robots.

Geekstory 4 PCS 915MHz LoRa Antenna U.F.L I-P.EX to SMA Connector Antenna for Lora Board ESP32 OLED CubeCell Board IOT

  • LoRa Antenna: 915 lora antenna is good for LoRa end devices for the 915mhz band. widely used with 915mhz cubecell board, htcc-ab02s lora gps, LoRa32u4 II etc; and in academic research projects that require wireless communication
  • Connector Type: The LoRa Antenna U.F.L I-P.EX to SMA Connector is a cable assembly that includes a LoRa antenna with a U.F.L I-P.EX connector on one end and an SMA connector on the other end. The U.F.L I-P.EX connector is used to connect the antenna to a wireless module, and the SMA connector is used to connect the cable assembly to an RF device. Band definition: 915MHz
  • Feature: Connector type: i-p.ex; Band definition: 915MHz; Standing wave ratio:

Geekstory Waterproof Active GPS Antenna Vehicle GPS Navigation with Fakra C Blue Connector for Car GPS Navigation Receiver System

  • The antenna has a frequency range of 1575.42 MHz, which is the standard frequency used by GPS satellites for navigation and tracking. LNA Gain: 28dB; Cable Length: 3m / 10 feet; Cable Connector: Fakra C Connector.
  • IP67 Waterproof Design: The GPS Antenna is designed to be waterproof, which means that it can be used in harsh weather conditions without being easily damaged. This makes it suitable for use in outdoor environments.
  • This GPS antennas with Fakra C connectors are commonly used in vehicles for navigation and tracking purposes. Fakra C connectors are designed to be easy to install and connect. They use a simple snap-on mechanism, which allows them to be securely connected and disconnected quickly.

Geekstory 35Bits WS2812 5050 RGB LED Ring Lamp Light Stage Light with Integrated Full Color RGB Ring Drivers for Arduino Raspberry Pi ESP32

  • Full color Programmable LED Strip, WS2811 IC Built in 5050SMD, You can set the led brightness in the arduino code, and also you can program each light individually
  • The LED Rings are individually addressable and can be controlled by WS2812 integrated circuits, allowing for customizable colors and brightness levels.
  • Note: The led ring doesn't come with cable

Geekstory Optical Fingerprint Reader Sensor Module Door Lock Access Control Red Light for Arduino Mega2560 UNO R3

  • Optical fingerprint sensor secure your project with biometrics. This fingerprint module can be used for fingerprint collection, fingerprint registration, fingerprint comparison and fingerprint search, it's easy to use, so its perfect for any project
  • Fingerprint sensor module can work with any microcontroller which with serial port: such as compatible with arduino, 51, avr, stm32, pic, arm, msp430
  • Package Includes:1 X Optical Fingerprint Reader Sensor, 2 X Cable. You can enroll new fingers directly - up to 240 finger prints can be stored

Geekstory 2PCS 45Bits WS2812 5050 RGB LED Ring Lamp Light Stage Light with Integrated Full Color RGB Ring Drivers for Arduino Raspberry Pi ESP32

  • Full color Programmable LED Strip, WS2811 IC Built in 5050SMD, You can set the led brightness in the arduino code, and also you can program each light individually
  • The LED Rings are individually addressable and can be controlled by WS2812 integrated circuits, allowing for customizable colors and brightness levels
  • Note: The led ring doesn't come with cable

Geekstory 4 Cell 6V AA Battery Holder Case with JR Connector Battery Cover Storage Box for RC Servo Tester DIY (Pack of 4)

  • Designed for AA battery and AA batteries are not included, you need prepare AA Batteries by yourself
  • Battery Type: 4 x AA Battery. It is suitable for DIY and maintenance of all kinds of dc equipment
  • The Battery Box Connector Type:JR Connector

Geekstory Battery Holder - 5 PCS 3V AAA Battery Case Cover Storage Box with ON/Off Switch and Wire Leads PH2.0 JST Connector Male for BBC Micro:bit Arduino

  • Designed for AAA battery and comes without batteries, and it's compatible with BBC Micro:bit board. The plastic cover is sturdy and grips the batteries well, It is very convenient to install and replace the battery
  • Microbit battery pack switch function: AAA battery holder with ON/OFF switch ; Recessed designed On-Off Switch, more safe, more durable, allows you to easily turn lights on or off in the various rooms
  • It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use

Geekstory 4PCS 2.4G 3DBI WiFi Antenna with 16cm Extended Cable U.FL to Female SMA for Arduino CC3000 ESP8266

  • Antenna length:10.8cm; Cable length:14cm
  • Extended range 3BI Adjustable WiFi Antenna with gold plated U.FL to Female SMA connection cable
  • Suitable for ESP8266, CC3000 or a wide range of other WiFi based projects looking to extend their WiFi range

Geekstory FAQs