Skip to content
Chairpartsonline feature image

Chairpartsonline

4.6 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Chairpartsonline has 78 products for sale. Chairpartsonline products range in price from $9.25 to $98.97, and the average price of all the products is about $32.46.

You can confidently purchase Chairpartsonline products from the seller chairpartsonline. The brand holds an average rating of 4.6, testifying to its excellent reputation.

Share

Chairpartsonline Best Sellers

Last Updated: Jan 12, 2025

chairpartsonline 25.5" Replacement Ring Base w/Swivel for Recliner Chairs & Furniture, Includes Swivel - S5471

  • 25.5" wide ring base made of 3/4" high test steel tube ring w/ four welded rectangular steel cross bars measuring 1" x 1/2" and 8 pre-installed glides
  • 10.25" square flat profile swivel plate w/ 65 3/8" Ball Bearings
  • Mounting holes for mounting swivel to underside of chair measure 8" x 8". Holes are rectangular shaped measuring approximately 1/4" x 3/8"

chairpartsonline 25" Replacement Recliner Base w/pitched Swivel Rocker Box Plate, 5-Leg w/caps - S5510

  • 25" replacement recliner rocker base w/ pre-installed 3 degree pitched swivel rocker box has three premium quality coil springs
  • Made in the USA - strong, sturdy, and reliable
  • Full 360 degree rotation on 51 pre-lubricated 3/8" ball-bearings

chairpartsonline 24" Replacement Ring Base w/Swivel for Recliner Chairs & Furniture, Includes Swivel - S5454

  • 24" wide ring base made of 3/4" high test steel tube ring w/ four welded rectangular steel cross bars measuring 1" x 1/2" and 8 pre-installed glides
  • 10.25" square flat profile swivel plate w/ 65 3/8" Ball Bearings
  • Mounting holes for mounting swivel to underside of chair measure 8" x 8". Holes are rectangular shaped measuring approximately 1/4" x 3/8"

Replacement Hardware Repair Kit for Office Chair Gas Lift Cylinder - Includes Clip, washers, & Bearing - S4451-K

  • Hardware repair kit for office chair gas lift cylinders
  • Contains: 1 Rubber Bumper, 1 Silver Washer, 2 Black Washers, 1 White Bearing Pack, 1 Retaining Clip
  • Attachment hardware for lower area of office chair gas lift pneumatic cylinder

chairpartsonline 6.25" Heavy Duty Replacement Bar Stool Swivel Plate - Made in The USA - S4695

  • Made in the USA - High quality, strong, & reliable bar stool swivel plate
  • 6.25" Square top & bottom plates w/ full 360 degree rotation on pre-lubricated ball-bearings full round track
  • Mounting holes are 0.75" long oval shaped slots & accomodate most 5", 5.25" & 5.5" square mounting screw hole patterns (Mounting hardware not included)

chairpartsonline 20" Chrome Foot Rest Ring for Drafting Stool or Office Chair - S4165-3

  • 20" wide chrome plated steel ring
  • Black painted aluminum center spokes
  • 2" (50mm) center hub hole width - Fits most standard 2" wide gas lift cylinders

Heavy Duty Replacement Office Chair Base - 28" Aluminum Black - S4180-2

  • Heavy Duty 28" Black Painted Aluminum Chair Base
  • Standard 2" (50mm) center hub hole to receive standard 2" gas lift cylinders
  • Standard 7/16"x7/8" (11mm x 25mm) sockets to receive standard chair caster stems

chairpartsonline Replacement Drafting Stool Gas Lift Cylinder Pneumatic Shock - Medium Stool Height - S6115

  • 2" (50mm) wide x 12.4" (315mm) tall main support tube column will fit most chair bases (larger diameter black tube)
  • 8" piston stroke adjustment range (up & down)
  • 22.25" (565mm) total overall extended length

chairpartsonline Heavy Duty Drafting Stool Gas Lift Cylinder Pneumatic Shock - Full Stool Height Replacement - S6120-HD Black

  • Heavy Duty - Built to withstand more weight and pressure than standard gas cylinders.
  • 2" wide column diameter will fit most chair bases
  • 10" (270mm) piston stroke with 28" (708mm) total overall extended length

Heavy Duty 5" Stroke Replacement Office Chair Gas Lift Cylinder Pneumatic Shock - S6111-HD Black

  • 2" (50mm) wide x 9.25" (235mm) tall center support column (larger diameter black tube) that will fit most chair bases
  • 5" piston stroke travel (up & down)
  • 16.33" (415mm) total overall extended length (from top to bottom)

Heavy Duty 4.25" Stroke Replacement Office Chair Gas Lift Cylinder Pneumatic Shock - S6222-HD-R Black

  • 2" (50mm) wide x 7.68" (195mm) tall center support column (larger diameter black tube) that will fit most chair bases
  • 4.25" of adjustment range for piston stroke / travel (up & down)
  • 14.4" (365mm) total overall extended length (from top to bottom)

chairpartsonline Telescoping Gas Cylinder Lift Dust Cover Shroud for Office Chairs - S1777-1

  • 3 piece telescoping gas lift cylinder protective cover
  • Fits most standard height office chair gas lift cylinders
  • 4.5" tall when fully collapsed / compressed

chairpartsonline 6.25" Heavy Duty Replacement Bar Stool Swivel w/ 3 Degree Pitch - Made in The USA - S4694

  • Made in the USA - High quality, strong, & reliable bar stool swivel plate
  • Mounting holes are 0.75" long oval shaped slots & accomodate most 5", 5.25" & 5.5" square mounting screw hole patterns (Mounting hardware not included)
  • Full 360 degree rotation on pre-lubricated ball-bearings in a full round track

Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6" x 10.2" Mounting Holes - S2979-HD Black

  • Heavy duty replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern
  • Heavy duty - rated up to 500 lbs.
  • Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders

chairpartsonline 7" Heavy Duty Replacement Bar Stool Swivel w/ 3 Degree Pitch - Made in The USA - S4696

  • Made in the USA - High quality, strong, & reliable bar stool swivel plate
  • Mounting holes are 0.75" long oval shaped slots & accomodate most 5.25", 5.5" & 5.75" square mounting screw hole patterns (Mounting hardware not included)
  • Full 360 degree rotation on pre-lubricated ball-bearings in a full round track

chairpartsonline 7" Replacement Bar Stool Swivel Plate - Made in The USA - S4697

  • Made in the USA - High quality, strong, & reliable bar stool swivel plate
  • Mounting holes are 0.75" long oval shaped slots & accomodate most 5.25", 5.5", & 5.75" square mounting screw hole patterns (Mounting hardware not included)
  • Full 360 degree rotation on pre-lubricated ball-bearings in full round track

chairpartsonline 7- Inch Replacement Memory Spring Auto Return Bar Stool Swivel

  • Made in the USA - High quality, strong, & reliable bar stool swivel plate w/ return to center feature - Great for replacement use on many stools, bar stools, & chairs
  • Mounting holes are 0.75" long oval shaped slots & accomodate most 5.25", 5.5", & 5.75" square mounting screw hole patterns (Mounting hardware not included)
  • Auto spring return to center feature

Replacement Office Chair Gas Lift Cylinder Pneumatic Shock - 5" Travel - S6111

  • 2" (50mm) wide x 9.25" (235mm) tall black center support column (larger black column) that will fit into most standard chair bases
  • 5" piston stroke / travel adjustment range (up & down)
  • 16.25" total overall length from top to bottom when fully extended

chairpartsonline 22" Replacement Ring Base w/Swivel for Recliner Chairs & Furniture, Includes Swivel - S5469-A

  • 22" wide ring base made of 3/4" high test steel tube ring w/ four welded rectangular steel cross bars measuring 1" x 1/2" and 8 pre-installed glides
  • 10.25" square flat profile swivel plate w/ 65 3/8" Ball Bearings
  • Mounting holes for mounting swivel to underside of chair measure 8" x 8". Holes are rectangular shaped measuring approximately 1/4" x 3/8" **Mounting hardware not included.

Replacement Office Chair Tilt Control Mechanism,Alloy Steel- S2979

  • Replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern.
  • Single lever for gas cylinder height activation, accepts standard tapered gas lift cylinders
  • Tilt control - push lever in to lock tilt, pull out to unlock

Chairpartsonline FAQs